Saving the data for recorded transaction...

Hi,
I have created a recording for some data for transaction VA01 in SHDB. Now I want to save this data in recording to the database.
What do I need to do that?

You want to save the code that was genarated for the BDC?
Now really sure what you are talking about. Can you please clarify.
Regards,
Rich Heilman

Similar Messages

Standard transaction CG02 is not saving the data through F4 help.

Hi Guru's,
I have a standard transaction CG02 for this i need to maintain the data for few of the fileds like Heat sensitive, Thermal energy hazard etc for updating Derived C-Alpha code. So for i can able to maintain data in two ways either directly or through F4 help. when i supply data through F4 help, on the F4 help window im providing the value and clicking on continue button. when i press on the contine button it has to update the Derived C-Alpha code if all the required fields filled. If suppose i do nt fill the required fileds it has to through the error message on the status bar like 'Invalid Data Combination'. Now the problem is when i clicking on continue button of F4 help window im displaying error message. when i try to change the value or try to fill the required fields so for im clicking on F4 button then its directly taking me out from the transaction. If i press on any key also samething is happening but the same is not happening when i supplied the value directly and saving. Please let me know the reason and help me for the same with needful solution. If anyting required plz ask me i wil provide u.
Here we are using the user-exit EXIT_SAPLC107_001 and is used in FM C107_CUSTOMER_FUNCTION_CALL.
Thanks in advance.
Yours,
Somu.

Hi Guru's,
I have a standard transaction CG02 for this i need to maintain the data for few of the fileds like Heat sensitive, Thermal energy hazard etc for updating Derived C-Alpha code. So for i can able to maintain data in two ways either directly or through F4 help. when i supply data through F4 help, on the F4 help window im providing the value and clicking on continue button. when i press on the contine button it has to update the Derived C-Alpha code if all the required fields filled. If suppose i do nt fill the required fileds it has to through the error message on the status bar like 'Invalid Data Combination'. Now the problem is when i clicking on continue button of F4 help window im displaying error message. when i try to change the value or try to fill the required fields so for im clicking on F4 button then its directly taking me out from the transaction. If i press on any key also samething is happening but the same is not happening when i supplied the value directly and saving. Please let me know the reason and help me for the same with needful solution. If anyting required plz ask me i wil provide u.
Here we are using the user-exit EXIT_SAPLC107_001 and is used in FM C107_CUSTOMER_FUNCTION_CALL.
Thanks in advance.
Yours,
Somu.

Some of the data for same records is going on to the next page in excel??

Hello,
I designed a template in word with page setup orientation to Landscape, to get the Excel report output. Later when i preview the same in Excel with the Landscape page setup..the print preview is showing me with some of the data going out of the page set up.My font size for data in word I put is 8pt Times New Roman.
Basically..my requirement is to print the report in excel with the landscape page setup.
But some of the data for same records is going on to the next page in excel??
How do i prevent this from happening?
Thanks in Advance!

Hello
The blog suggested above is to set the output for a PDF document using RTF template. Whereas, my requirement is to get a excel output using RTF template, with data fitting directly with in the landscape orientation of EXCEL when printed.
Basically, the requirement is : When i run the report, the excel output should be sent to a printer with style 'Landscape' from apps?? But the problem is that i am not getting all the pagebreaks i put in the RTF template and also some of the data for the same records is not fitting in to the landscape orientation of the excel while it gets printed.
But when i run the same as a PDF everything is fine... ..But that's not my requirement...Please help!
Thanks,

Not saving the data in two tables

Hello,
its my production problem, i have an update form where you can update the records and these
records will sit in the temp tables until the final approval from the supervisor.
In this update form i have two table where i am saving the data one is dup_emp to save the
officer data and another is the dup_address to save the officer where he worked data.
in this form address form is pop up screen where you can update and gets back to the original
form where you can see all the other fields. my problem is if a user hit the cancel button on
address form example the user doesnt want to update any information on that screen so user
cancel that screen, and comes to the other screen where the user makes the changes to the
appropriate fields and hits the SAVE button. in this case its saving only to the dup_emp table
data not the address data from the address form to dup_address table for the same record.
if the user cancels in both the screens cancel button it should delete the record from both the
tables but cancel in form and saves in another form it should save the record in both the
tables.
here is my code from both cancel buttons from both the forms.
this is code is from address form cancel button.
delete from dup_address
where address_id=:address_id
and parent_table_name='emp';
commit;
CLEAR_BLOCK;
go_block('DUP_EMP');
This code is from dup form of the cancel button
declare
temp_address_id varchar2 (12);
begin
delete from dup_emp
where secondemp_id =:dup_emp.secondemp_id;
delete from dup_address
where parent_t_id=:global.secondemp
and parent_table_name='emp';
commit;
clear_block;
go_block('secondaryemp');
END;

Hi,
As Aravind mentioned, it's nothing related to workflow. You have to find a BADI in tcode PA30 that could be used after the infotype is updated. So, you can use FM SAVE_TEXT.
Regards,

Error occured while uploading the data for Tocde QP01 (BDC)

Hi,
I am facing a strange problem i.e. when i try to upload the data for the Tcode QP01 i am able to upload the data for the 18 rows but when it is more than 18 ,it gives the following error and saves the data upto 18 rows only :-
CALL_TRANSACTION QP01 returncode:     0 RECORD:          0
S Field RC27X-FLG_SEL . not found in loop of screen SAPLCPDI 1400
S Cursor field PLMKB-VERWMERKM (18) does not exist in the screen
S Field PLMKB-VERWMERKM (18) does not exist in the screen SAPLQPAA 0150
S Field PLMKB-STICHPRVER (18) does not exist in the screen SAPLQPAA 0150
S Inspection plan with plan group 12775 for material 200999 is saved
Is there any way to solve this problem...

hi,
Ok,i agree with you but the thing is it was allowing to upload the data for more than 18 rows as there was logic written. It is specified in the code:-
ELSEIF itab1-serial > 18 AND itab1-serial < 35.
              IF index = 19.
                index = 2.
              ENDIF.
Edited by: nav009 on Sep 9, 2009 8:25 AM

Table Maintenance Events - "Event 02 After Saving the Data in the Database"

Hi,
Can we identify the record marked for deletion in the "Event 02 After Saving the Data in the Database" ?
Thanks & Regards,
Esha Raj

Look at online documentation :
- [Event 02: After Saving the Data in the Database|https://help.sap.com/saphelp_nw04/helpdata/en/77/06b11859f511d2a6070000e82deaaa/frameset.htm]
. - [Internal Table TOTAL|https://help.sap.com/saphelp_nw04/helpdata/en/77/06b11859f511d2a6070000e82deaaa/frameset.htm]
. . - [Field Symbols <ACTION> and <ACTION_TEXT>|https://help.sap.com/saphelp_nw04/helpdata/en/77/06b11859f511d2a6070000e82deaaa/frameset.htm]
. . . - [Constants for Field Symbols <ACTION>, <ACTION_TEXT>, <XACT> and <XACT_TEXT>|https://help.sap.com/saphelp_nw04/helpdata/en/77/06b11859f511d2a6070000e82deaaa/frameset.htm]
Regards,
Raymond

Clearing the FORM after SAVING the data

Question 1:
I've got a form that is built based on a table. When I enter the data and click on the save button, the FORM doesn't clear for me to enter the data for the next record. Where and how can I set up a process so that the form clears after the data is saved?
Quesstion 2:
I've got a form that is built based on a table. The table has 10 fields where one of the fields is a FK. I want all 10 fields to be on the form. I want the FK to be a select list where the display value is a description and a return value is an ID. I have picked the correct fields for display value and return value. However, when the data is saved, the return value is not stored in the table field. The field is bank. Any idea why this is happening?

Hi,
The simplest way to clear the items for a page is to add the page number in to a Branch that is triggered by your Create/Save button - check your branches to see which one is linked to this button and enter the page number in the Clear Cache setting. If you created the form using a wizard, you should, however, already have a "reset page" page process that does this for you - if you haven't got this, then either update the branch or create a new "Session State" process that clears the cache.
For your second question, the data will be saved provided the page item is correctly linked to the table's field and you have "Process Row of tablename" set up correctly. If you have a "Process Row..." process, check the required settings in the "Source: Automatic Row Processing (DML)" section as these identify the table and its Primary Key. If you don't have one, you can create a new "Data Manipulation" page process to do this. In the page item, check that you have "Source Used" set to "Always, replacing any existing value in session state", "Source Type" set to "Database Column" and "Source Value or Expression" set to the table field's name.
One thing to check as well is, if you already have a "reset page" process, make sure it is after all other processes - change the sequence number if necessary.
Andy

How to upload the data to 'abzu' transaction using bapi

Hi Experts ,
I need to upload the data to the (asset write up ) transaction 'abzu' and please help me inthis regard
i found some bapi's like below
BAPI_FIXEDASSET_CHANGE Changes an Asset
BAPI_FIXEDASSET_CREATE Creates an Asset
BAPI_FIXEDASSET_CREATE1 Creates an Asset
BAPI_FIXEDASSET_GETDETAIL Display Detailed Information on a Fixed Asset
BAPI_FIXEDASSET_GETLIST Information on Selected Assets
BAPI_FIXEDASSET_OVRTAKE_CREATE BAPI for Legacy Data Transfer
BAPI_FIXEDASSET_TEST BAPI for Legacy Data Transfer
i tried with this bapies but unable to do the transfer the data ,
please help me ,
which is the exactly suitable bapi for uploading the data to 'abzu' transaction
i apriciate you advanced ,
please give me the exactly solution for this ,
Regards.,

Hi Experts ,
I need to upload the data to the (asset write up ) transaction 'abzu' and please help me inthis regard
i found some bapi's like below
BAPI_FIXEDASSET_CHANGE Changes an Asset
BAPI_FIXEDASSET_CREATE Creates an Asset
BAPI_FIXEDASSET_CREATE1 Creates an Asset
BAPI_FIXEDASSET_GETDETAIL Display Detailed Information on a Fixed Asset
BAPI_FIXEDASSET_GETLIST Information on Selected Assets
BAPI_FIXEDASSET_OVRTAKE_CREATE BAPI for Legacy Data Transfer
BAPI_FIXEDASSET_TEST BAPI for Legacy Data Transfer
i tried with this bapies but unable to do the transfer the data ,
please help me ,
which is the exactly suitable bapi for uploading the data to 'abzu' transaction
i apriciate you advanced ,
please give me the exactly solution for this ,
Regards.,

How to populate the data for additional fields in custom report of fbl5n tr

hallo friends,
i ha ve to add some fields to the output of custome report of transaction FBL5N.
Till now i have only added the fields to the output.
Now i have to write the code to populate the data for those fields in the program.
1.     Customer Credit Group(ACM/RCM): (Table: KNKK; Field Name: VKORG )
2.     Credit Representative Group: (Table: KNKK; Field Name: SBGRP)
3.     Customer Account Number(CAN#): (Table: KNKK; Field Name: KNKLI)
4.     Alternative Payer(ALTP#) : (Table: KNA1; Field Name: KUNNR)
5.     Risk Category: (Table: KNKK; Field Name: CTLPC)
6.     Credit Info Number: (Table: KNKK; Field Name: KRAUS)
7.     Rating: (Table: KNKK; Field Name: DBRTG)
8.     Payment Index: (Table: KNKK; Field Name: DBPAY)
9.     Credit control area: (Table: KNKK; Field Name: KKBER)
10.     Company code: (Table: KNB1; Field Name: BUKRS)
11.     Sales Organization: (Table: KNVV; Field Name: VKORG)
These are al fields i have to populate in the program..
MY ATTEMPTS:
I tried getting the data for KNKK table by GET KNKK ,but it is giving some garbage values...
And Logical database used here is DDF,and i have to add the VKORG of KNVV too...but KNVV is not there in DDF...
Can anybody tell me how should i proceed..
thanks in advance.

Thnx Andreas,
i have following doubts again..
I have to add sales organisation field to the selection screen...(this is given in the req.)
now if i will say GET KNKK...it would not keep account of this 'sales organisation' field...so how should i fetch the data with these input data( i.e. 'compny code' and 'customer' are the fields given by LDB and 'sales oraganisation' is the field i put it on the selection screen)
And what about the KNVV-VKORG ,because the KNVV is not present in the LDB.

Problem while uploading the data in IBPI Transaction

Hi All,
Here i am processing the (data for IW22)session from sm35, here i am getting error Mallfunction End(Time).
Anybody can help me in this. It is very urgent.
Thanks & Regards,
Venkat N

Hi
Even we are facing the same issue and even after we UnProtect the record, the problem persists and we are unable to change or modify record in MDM.
Temporary solution could be to re-start the MDM services.
We have also raised a OSS note on the same with SAP, hopefully this will get sorted out.
Regards
Navneet

Warning massage while saving the asset master record

Hi all,
I have a problem while saving the asset master record.My client manages the group asset in the depreciation area 15 for tax reporting.What I have done in the configuration that, I have created a separate asset class for group asset and marked this asset for entirely consisting of group assets.Then I have createdall the grpup assets in this marked class.For example, supppose I have created one group asset class 50000 and I have created all the group assets in this class.Then I assign the gr.asset no. in the master record of the normal assets and while saving the master record I am getting the warning massage as the account determination is different than the asset.It may't be possible to reconcile them from the FI-AA.But if I am creating the group assets in the class of the normal assets such type of error massage doesn't appear.Also while retiring the normal assets the asseet is not being deactivated automatically and instead a warning massage is coming the asset is still having value in the depreciation area 15 and can't be deactivated.Can any body suggest where I have gone wrong in the configuration?
Debabrata Das

Update delays sometimes mean that there is a queue waiting at the UPD task. Go to SM51 and check to make sure that there are no other tasks waiting to be processed. Check with you Basis group - they might be able to run some diagnostics on the update task.

How to validate plan data before saving the data

I have a total row in my planning layout which is a summation of plan data in 2 other rows. While saving the data, I should check whether the total is 200 and if not the data should not be saved. How can I achieve this! Any help would be appreciated.
Regards,
Tipo.

Hi,
I'm also facing the same problem in my development...I tried above all the ways,but we cannot stop saving the wrong data.In this case you have to write the java script for save button, before saving the data if it is correct then go for the next step to save other wise throw an error message or without save the data .
You need to write the JAVA script for save button,in this code you need to read the data form the layout and check the total value, i am not sure if layout is dynamic how we can achieve this???.
My development also stopped for this issue,In my case i have two layouts ,one is for actual and another one is for Planing layout(Function - Distribution equally),using the fox code i succeed to read and throw an error message for incorrect data but i can not stop to saving for incorrect total data.
Once you solved this problem please post the message in SDN.This type of requirements is very tough and we need to share to our friends.
Thanks.

Saving the data through subscreens

Hi,
I have created a dialog program in which there is a tabstrip with 3 tabs in it.On the main screen I have the school name.In the first subscreen of the tabstrip there is school details,in the second tab there is teacher deails and in the third tab there is students detail.I am writing the code in the PAI module of the main screen for saving the data.
when 'SAVE'.
ztable-school_name= it_school-school.
and so on.
But when I am pressing the save button on the main screen the data is not getting saved.Do I need to write the code in the PAI module of the subscreens.Please suggest some solution.

hi shashi,
since u r displaying values in all the three tabs, the functionality of save should be given in PAI of main screen. If u do it in PAI of subscreens, it will not be triggered as u r not inputing any there..
Rgds.,
subash

How can I clear a form after submitting and saving the data in the iOS Acrobat Reader App

How can I clear a form after submitting and saving the data in the iOS Acrobat Reader App

Darrell,
Thanks for this response. After I posted mine, I saw that the resetForm JavaScript method is documented as being supported starting with version 10.5: http://www.adobe.com/devnet-docs/acrobatetk/tools/Mobile/js.html
But I haven't been able to get it to work. Can you clarify if support was indeed added and if it works for you?

Erroe gettin in loading the data for sample application

Dear Expert iam getting the followiong error while loading the data for sample application in Essbase Administrator Console form SampleApp_data.txt
Parallel dataload enabled: [1] block prepare threads, [1] block write threads.
Unknown Member [E01_0] in Data Load, [1] Records Completed
Unexpected Essbase error 1003014
can you please help me in this regrard,
Thanks and regards,
Kishore

Hi,
The error message is saying you don't have a member named "E01_0" in your outline, you can check this by opening the outline in EAS and trying to find the member.
Once you have checked that go into planning web, administration, dimensions, select entities and search for "E01_0", if it exists then you have not refresh from planning to essbase. You will need to go manage database and refresh.
Cheers
John

Saving the data for recorded transaction...

Similar Messages

Maybe you are looking for