Scaled text point sizes different.

If i do a text box and put say 16 point text in it, then (as part of a group or folder) scale that text box (say 200%), i get irregular point sizes.
If i use the text tool and select the enlarged copy, the character palette tells me i have 16 point copy still (even though it plainly isnt).
If its a single point size and not larger headings, i can use the move tool and it will tell me the faux size - but thats no work around.
So in short, how do i scale (using the transform tool) copy and it enlarge the actual point size of the copy.
Hopefully that makes sense.
Thanks for your time
Warren

So (in Photoshop 13.0.4 x64 Extended) i create some text:
You can see its 24 point. I then use the transform tool to enlarge it (in this case 200%) and then when i select it, the text says its stil 24pt - when it clearly isnt.
Does that not do it with yours then?
Thanks for your time.
W

Similar Messages

Leading in Pages. I've just discovered that different typefaces seem to have different auto-leading in Pages. I am used to default leading being 120% of point size, but it seems this is not so any more. The same text in 10pt Times New Roman, which I would

I've just discovered that different typefaces seem to have different auto-leading in Pages. I am used to default leading being 120% of point size (or some consistent rule), but it seems this is not so any more. The same text in 10pt Times New Roman, which I would expect to line up with 10pt Palatino, for example, doesn't. I've tried using the inspector, at least to get both faces to behave the same for given settings, but I haven't been able to. How much control does Pages allow for this type of settings, and are there any hidden secrets as to how to do so? Many thanks
Message was edited by: Just me then

If you set the line spacing in the inspector to Exactly and 12 points for 10 point type, it will work the way you want.

Why does text in Smallest File Size PDF change point size and vertical scaling?

If you have a document with 6 pt. type (no scaling) and Save As a Screen-Quality PDF, when you open that resulting PDF in Illustrator, the 6 pt. type has become 5.1 pt. type with vertical scaling of 117.65%! Normally, I would have no reason to open the PDF in Illustrator, but our clients are doing it. They want the smallest possible PDFs but still want to be able to check the point sizes for legal reasons. If you Save As a High Quality Print PDF, the type is fine, but that won't always work if there are alot of images and the file size needs to be kept as small as possible.

sorry for 2 posts, technical problem with forums and images.
Leading changed to 7.2, but as you know when going to pdf paragraphs are broken up into seperate lines.

HP LaserJet Pro 400 MFP M425dn won't print text at 72 point size or larger

My workplace recently purchased an HP LaserJet Pro 400 MFP M425dn all-in-one printer. It works excellently with the exception of the fact that it won't print text that's 72 points or larger in size. I've tried numerous fonts that're pre-installed with Windows, and all of them print properly at point size 71.5 or smaller; anything else simply doesn't show up in prints. The content that's sized at 72 points or higher *does* affect the flow of other printed content on the page, however. It's like the 72-point or larger text is occupying space, but it's completely invisible on the printed page. I've tested this using Microsoft Word 2002 on three separate computers, two of which have Windows 7 installed and one of which has Windows Vista installed. The problem is identical on all three computers. The printer is connected via ethernet cable to our wired network. I've installed the included printer software, and I don't believe that there are any updates to it that weren't installed up to this point. Any thoughts on how to resolve this issue?

hello, i only made an account to solve this for you guys because it has been a headache for me also.... let me apologize before hand for terrible grammar and punctuation i am in a huge hurry Now this may not work for everybody but i fixed it on my machine with the following now before you print ...use (ctrl+p) in your word processor to open the print window click on (properties) then navigate to the (advanced) tab now, I have a section called printer features under this category there is an option to "send truetype as bitmap" enable this and see if it can help any of you, for me, with this ENABLED I can print any size font my word processor will allow me to type specs of my machinedell d6420win7msoft word 2007 printer itself is hp laserjet 200 color m276 printer driver is HP LaserJet 200 color MFP M276 PCL 6 i understand that this printer and driver is not identical to yours per se but the nature of these drivers makes it highly likely that this solution will work for most of you if this helps, have somebody else post it more noticeably because i will probly not be signing back in to this website i created this account just to post this and hopefully solve this annoying issue for many of you ...no kudos needed

Changing text features (font, point size etc) in multiple text boxes at the same time

That pretty much says it all: I'm using pages for some simple initial rendering to send my graphic designer and it would save me some time if I could change the font & point-size for all the various text boxes at the same time.
Cheers,
Rax

Thank you both!
How 'bout changing the actual content uniformly? Am I still stuck changing each box individually? I know that I am pushing it to do things that it wasn't made for, but I can dream, can't I?
Thanks again,
Rax

How to discover text objects with specific point size

Can I somehow narrow down the selection to point size xx and smaller? I'd like to outline those objects later.
var alltxtObjsBelow10 = app.activeDocument.stories.everyItem() //...with point size smaller than 10pts
alltxtObjsBelow10.createOutlines();

Try this.
var doc = app.activeDocument;
var texts = doc.stories.everyItem().textStyleRanges.everyItem().getElements();
for(var i=0;i<texts.length;i++)
if(texts[i].pointSize < 10)
texts[i].createOutlines();
Regards,
Chinna

Using my iMac, how do I customize the point size of the text on Office365

I have this beautiful iMac monitor. I just upgraded to Office365 Home Edition and now I have navigation bars and columns that have text that is hard for me to read. I simply want to move from 8 pt type, or whatever they're using, to 12 pt type size. Is there a way to increase the point size on the font and otherwise customize, for this particular application?
Thanks very much.

http://answers.microsoft.com/en-us/mac

Dinamic text changes sizes on different computers!!!!!

I am using flash 8, with dinamic text boxes so I don't have
antialias on my texts but I'm having trouble with different
computers because the text changes sizes depening on the computer
that I see my swf movie. I want my texts to always look the same
but in some computers it displays smaller and the text can't be
read. How can I aviod this! I didn't embed the the text boxes
because I don't want any antialias. How can I force the text to
stay a certain size!!!!
Thanks a lot for any help,
Brenda.

Yes.
Some will tell you how large the file actually is, some will tell you how many drive blocks it occupies.
Some computers use 1024 bytes to the the MB, some use 1000 bytes when measuring size/capacity.
x

Awesome WM text pointer disappears on tag switch

Hi,
I have the following problem. On one tag I keep Atom with some file open. If I use the mouse to click on some other tag and go back to Atom everything is ok. If I use modkey+<num> to switch to another tag and back while the mouse is over the task bar or over the widgets everything is ok. But when I switch the tag again with the keyboard shortcut and go back to Atom while the mouse is somewhere over the clients the text pointer in Atom disappears and I need to click somewhere in the text to make it reappear. And it's really annoying when coding to reach for the mouse every time you change to some other tag and back.
Here's my rc.lua:
Dremora Awesome WM config 2.0
github.com/copycat-killer
-- {{{ Required libraries
local gears = require("gears")
local awful = require("awful")
awful.rules = require("awful.rules")
require("awful.autofocus")
local wibox = require("wibox")
local beautiful = require("beautiful")
local naughty = require("naughty")
local drop = require("scratchdrop")
local lain = require("lain")
-- {{{ Error handling
if awesome.startup_errors then
naughty.notify({ preset = naughty.config.presets.critical,
title = "Oops, there were errors during startup!",
text = awesome.startup_errors })
end
do
local in_error = false
awesome.connect_signal("debug::error", function (err)
if in_error then return end
in_error = true
naughty.notify({ preset = naughty.config.presets.critical,
title = "Oops, an error happened!",
text = err })
in_error = false
end)
end
-- {{{ Autostart applications
function run_once(cmd)
findme = cmd
firstspace = cmd:find(" ")
if firstspace then
findme = cmd:sub(0, firstspace-1)
end
awful.util.spawn_with_shell("pgrep -u $USER -x " .. findme .. " > /dev/null || (" .. cmd .. ")")
end
run_once("urxvtd")
run_once("unclutter")
-- {{{ Variable definitions
-- localization
--os.setlocale(os.getenv("LANG"))
-- beautiful init
beautiful.init(os.getenv("HOME") .. "/.config/awesome/themes/dremora/theme.lua")
-- common
modkey = "Mod4"
altkey = "Mod1"
terminal = "xfce4-terminal" or "xterm"
editor = os.getenv("EDITOR") or "nano" or "vi"
editor_cmd = terminal .. " -e " .. editor
-- user defined
browser = "google-chrome"
browser2 = "iron"
gui_editor = "atom"
-- graphics = "gimp"
local layouts = {
awful.layout.suit.floating,
lain.layout.uselesstile,
awful.layout.suit.fair,
lain.layout.uselesstile.left,
lain.layout.uselesstile.top
-- {{{ Tags
tags = {
names = { "ƀ", "Ƅ", "Ɗ", "ƈ", "ƙ" },
layout = { layouts[1], layouts[3], layouts[2], layouts[1], layouts[5] }
for s = 1, screen.count() do
tags[s] = awful.tag(tags.names, s, tags.layout)
end
-- {{{ Wallpaper
if beautiful.wallpaper then
for s = 1, screen.count() do
gears.wallpaper.maximized(beautiful.wallpaper, s, true)
end
end
-- {{{ Menu
mymainmenu = awful.menu.new({ items = require("menugen").build_menu(),
theme = { height = 16, width = 130 }})
-- {{{ Wibox
markup = lain.util.markup
white = beautiful.fg_focus
gray = "#858585"
-- Textclock
mytextclock = awful.widget.textclock(markup(gray, " %a")
.. markup(white, " %d ") .. markup(gray, "%b ") .. markup(white, "%H:%M "))
-- Calendar
lain.widgets.calendar:attach(mytextclock, { fg = white })
--[[ Mail IMAP check
-- commented because it needs to be set before use
mailwidget = lain.widgets.imap({
timeout = 180,
server = "server",
mail = "mail",
password = "keyring get mail",
settings = function()
mail_notification_preset.fg = white
mail = ""
count = ""
if mailcount > 0 then
mail = "Mail "
count = mailcount .. " "
end
widget:set_markup(markup(gray, mail) .. markup(white, count))
end
-- MPD
mpdwidget = lain.widgets.mpd({
settings = function()
mpd_notification_preset.fg = white
artist = mpd_now.artist .. " "
title = mpd_now.title .. " "
file = mpd_now.file .. " "
if mpd_now.state == "pause" then
file = "mpd paused"
elseif mpd_now.state == "stop" then
file = ""
end
widget:set_markup(markup(gray, file))
end
-- /home fs
fshome = lain.widgets.fs({
partition = "/home",
settings = function()
fs_notification_preset.fg = white
fs_header = ""
fs_p = ""
if fs_now.used >= 90 then
fs_header = " Hdd "
fs_p = fs_now.used
end
widget:set_markup(markup(gray, fs_header) .. markup(white, fs_p))
end
-- Battery
batwidget = lain.widgets.bat({
settings = function()
bat_header = " Bat "
bat_p = bat_now.perc .. " "
if bat_now.status == "Not present" then
bat_header = ""
bat_p = ""
end
widget:set_markup(markup(gray, bat_header) .. markup(white, bat_p))
end
-- ALSA volume
volumewidget = lain.widgets.alsa({
settings = function()
header = " Vol "
vlevel = volume_now.level
if volume_now.status == "off" then
vlevel = vlevel .. "M "
else
vlevel = vlevel .. " "
end
widget:set_markup(markup(gray, header) .. markup(white, vlevel))
end
-- Weather
yawn = lain.widgets.yawn(123456,
settings = function()
yawn_notification_preset.fg = white
end
-- Separators
first = wibox.widget.textbox('<span font="Tamsyn 4"> </span>')
arrl_pre = wibox.widget.imagebox()
arrl_pre:set_image(beautiful.arrl_lr_pre)
arrl_post = wibox.widget.imagebox()
arrl_post:set_image(beautiful.arrl_lr_post)
-- Create a wibox for each screen and add it
mywibox = {}
mypromptbox = {}
mylayoutbox = {}
mytaglist = {}
mytaglist.buttons = awful.util.table.join(
awful.button({ }, 1, awful.tag.viewonly),
awful.button({ modkey }, 1, awful.client.movetotag),
awful.button({ }, 3, awful.tag.viewtoggle),
awful.button({ modkey }, 3, awful.client.toggletag),
awful.button({ }, 4, function(t) awful.tag.viewnext(awful.tag.getscreen(t)) end),
awful.button({ }, 5, function(t) awful.tag.viewprev(awful.tag.getscreen(t)) end)
mytasklist = {}
mytasklist.buttons = awful.util.table.join(
awful.button({ }, 1, function (c)
if c == client.focus then
c.minimized = true
else
-- Without this, the following
-- :isvisible() makes no sense
c.minimized = false
if not c:isvisible() then
awful.tag.viewonly(c:tags()[1])
end
-- This will also un-minimize
-- the client, if needed
client.focus = c
c:raise()
end
end),
awful.button({ }, 3, function ()
if instance then
instance:hide()
instance = nil
else
instance = awful.menu.clients({ width=250 })
end
end),
awful.button({ }, 4, function ()
awful.client.focus.byidx(1)
if client.focus then client.focus:raise() end
end),
awful.button({ }, 5, function ()
awful.client.focus.byidx(-1)
if client.focus then client.focus:raise() end
end))
for s = 1, screen.count() do
-- Create a promptbox for each screen
mypromptbox[s] = awful.widget.prompt()
-- Create an imagebox widget which will contains an icon indicating which layout we're using.
-- We need one layoutbox per screen.
mylayoutbox[s] = awful.widget.layoutbox(s)
mylayoutbox[s]:buttons(awful.util.table.join(
awful.button({ }, 1, function () awful.layout.inc(layouts, 1) end),
awful.button({ }, 3, function () awful.layout.inc(layouts, -1) end),
awful.button({ }, 4, function () awful.layout.inc(layouts, 1) end),
awful.button({ }, 5, function () awful.layout.inc(layouts, -1) end)))
-- Create a taglist widget
mytaglist[s] = awful.widget.taglist(s, awful.widget.taglist.filter.all, mytaglist.buttons)
-- Create a tasklist widget
mytasklist[s] = awful.widget.tasklist(s, awful.widget.tasklist.filter.currenttags, mytasklist.buttons)
-- Create the wibox
mywibox[s] = awful.wibox({ position = "top", screen = s, height = 18 })
-- Widgets that are aligned to the left
local left_layout = wibox.layout.fixed.horizontal()
left_layout:add(first)
left_layout:add(mytaglist[s])
left_layout:add(arrl_pre)
left_layout:add(mylayoutbox[s])
left_layout:add(arrl_post)
left_layout:add(mypromptbox[s])
left_layout:add(first)
-- Widgets that are aligned to the right
local right_layout = wibox.layout.fixed.horizontal()
if s == 1 then right_layout:add(wibox.widget.systray()) end
right_layout:add(first)
right_layout:add(mpdwidget)
--right_layout:add(mailwidget)
right_layout:add(fshome)
right_layout:add(batwidget)
right_layout:add(volumewidget)
right_layout:add(mytextclock)
-- Now bring it all together (with the tasklist in the middle)
local layout = wibox.layout.align.horizontal()
layout:set_left(left_layout)
layout:set_middle(mytasklist[s])
layout:set_right(right_layout)
mywibox[s]:set_widget(layout)
end
-- {{{ Mouse bindings
root.buttons(awful.util.table.join(
awful.button({ }, 3, function () mymainmenu:toggle() end),
awful.button({ }, 4, awful.tag.viewnext),
awful.button({ }, 5, awful.tag.viewprev)
-- {{{ Key bindings
globalkeys = awful.util.table.join(
-- Take a screenshot
-- https://github.com/copycat-killer/dots/blob/master/bin/screenshot
awful.key({ altkey }, "p", function() os.execute("screenshot") end),
-- Tag browsing
awful.key({ modkey }, "Left", awful.tag.viewprev ),
awful.key({ modkey }, "Right", awful.tag.viewnext ),
awful.key({ modkey }, "Escape", awful.tag.history.restore),
-- Non-empty tag browsing
awful.key({ altkey }, "Left", function () lain.util.tag_view_nonempty(-1) end),
awful.key({ altkey }, "Right", function () lain.util.tag_view_nonempty(1) end),
-- Default client focus
awful.key({ altkey }, "k",
function ()
awful.client.focus.byidx( 1)
if client.focus then client.focus:raise() end
end),
awful.key({ altkey }, "j",
function ()
awful.client.focus.byidx(-1)
if client.focus then client.focus:raise() end
end),
-- By direction client focus
awful.key({ modkey }, "j",
function()
awful.client.focus.bydirection("down")
if client.focus then client.focus:raise() end
end),
awful.key({ modkey }, "k",
function()
awful.client.focus.bydirection("up")
if client.focus then client.focus:raise() end
end),
awful.key({ modkey }, "h",
function()
awful.client.focus.bydirection("left")
if client.focus then client.focus:raise() end
end),
awful.key({ modkey }, "l",
function()
awful.client.focus.bydirection("right")
if client.focus then client.focus:raise() end
end),
-- Show Menu
-- awful.key({ modkey }, "w",
-- function ()
-- mymainmenu:show({ keygrabber = true })
-- end),
-- Show/Hide Wibox
-- awful.key({ modkey }, "b", function ()
-- mywibox[mouse.screen].visible = not mywibox[mouse.screen].visible
-- end),
-- On the fly useless gaps change
awful.key({ altkey, "Control" }, "=", function () lain.util.useless_gaps_resize(1) end),
awful.key({ altkey, "Control" }, "-", function () lain.util.useless_gaps_resize(-1) end),
-- Layout manipulation
awful.key({ modkey, "Shift" }, "j", function () awful.client.swap.byidx( 1) end),
awful.key({ modkey, "Shift" }, "k", function () awful.client.swap.byidx( -1) end),
awful.key({ modkey, "Control" }, "j", function () awful.screen.focus_relative( 1) end),
awful.key({ modkey, "Control" }, "k", function () awful.screen.focus_relative(-1) end),
awful.key({ modkey, }, "u", awful.client.urgent.jumpto),
awful.key({ modkey, }, "Tab",
function ()
awful.client.focus.history.previous()
if client.focus then
client.focus:raise()
end
end),
awful.key({ altkey, "Shift" }, "l", function () awful.tag.incmwfact( 0.05) end),
awful.key({ altkey, "Shift" }, "h", function () awful.tag.incmwfact(-0.05) end),
awful.key({ modkey, "Shift" }, "l", function () awful.tag.incnmaster(-1) end),
awful.key({ modkey, "Shift" }, "h", function () awful.tag.incnmaster( 1) end),
awful.key({ modkey, "Control" }, "l", function () awful.tag.incncol(-1) end),
awful.key({ modkey, "Control" }, "h", function () awful.tag.incncol( 1) end),
awful.key({ modkey, }, "space", function () awful.layout.inc(layouts, 1) end),
awful.key({ modkey, "Shift" }, "space", function () awful.layout.inc(layouts, -1) end),
awful.key({ modkey, "Control" }, "n", awful.client.restore),
-- Standard program
awful.key({ modkey, }, "Return", function () awful.util.spawn(terminal) end),
awful.key({ modkey, "Control" }, "r", awesome.restart),
awful.key({ modkey, "Shift" }, "q", awesome.quit),
-- Dropdown terminal
awful.key({ modkey, }, "z", function () drop(terminal) end),
-- Widgets popups
awful.key({ altkey, }, "c", function () lain.widgets.calendar:show(7) end),
awful.key({ altkey, }, "h", function () fshome.show(7) end),
awful.key({ altkey, }, "w", function () yawn.show(7) end),
-- ALSA volume control
awful.key({ }, "XF86AudioRaiseVolume",
function ()
awful.util.spawn(string.format("amixer -c %s set %s 1+", volumewidget.card, volumewidget.channel))
volumewidget.update()
end),
awful.key({ }, "XF86AudioLowerVolume",
function ()
awful.util.spawn(string.format("amixer -c %s set %s 1-", volumewidget.card, volumewidget.channel))
volumewidget.update()
end),
awful.key({ }, "XF86AudioMute",
function ()
awful.util.spawn(string.format("amixer -c %s set %s toggle", volumewidget.card, volumewidget.channel))
--awful.util.spawn(string.format("amixer set %s toggle", volumewidget.channel))
volumewidget.update()
end),
awful.key({ altkey, "Control" }, "m",
function ()
awful.util.spawn(string.format("amixer -c %s set %s 100%%", volumewidget.card, volumewidget.channel))
volumewidget.update()
end),
-- MPD control
awful.key({ }, "XF86AudioPlay",
function ()
awful.util.spawn_with_shell("mpc toggle || ncmpc toggle || pms toggle")
mpdwidget.update()
end),
awful.key({ }, "XF86AudioStop",
function ()
awful.util.spawn_with_shell("mpc stop || ncmpc stop || pms stop")
mpdwidget.update()
end),
awful.key({ }, "XF86AudioPrev",
function ()
awful.util.spawn_with_shell("mpc prev || ncmpc prev || pms prev")
mpdwidget.update()
end),
awful.key({ }, "XF86AudioNext",
function ()
awful.util.spawn_with_shell("mpc next || ncmpc next || pms next")
mpdwidget.update()
end),
-- Copy to clipboard
awful.key({ modkey }, "c", function () os.execute("xsel -p -o | xsel -i -b") end),
-- User programs
awful.key({ modkey }, "w", function () awful.util.spawn(browser) end),
awful.key({ modkey }, "s", function () awful.util.spawn(gui_editor) end),
awful.key({ modkey }, "g", function () awful.util.spawn(graphics) end),
awful.key({ modkey }, "e", function () awful.util.spawn("thunar") end),
-- Prompt
awful.key({ modkey }, "r", function () mypromptbox[mouse.screen]:run() end),
awful.key({ modkey }, "x",
function ()
awful.prompt.run({ prompt = "Run Lua code: " },
mypromptbox[mouse.screen].widget,
awful.util.eval, nil,
awful.util.getdir("cache") .. "/history_eval")
end),
-- {{ Configures Keymap }} --
awful.key({ "Control", "Shift" }, "k",
function()
awful.util.spawn("xmodmap /home/peio/.Xmodmap_Internal")
naughty.notify({ timeout = 8, text = "Keyboard configured for internal." })
end),
awful.key({ "Control", "Shift" }, "l",
function()
awful.util.spawn("xmodmap /home/peio/.Xmodmap_External")
naughty.notify({ timeout = 8, text = "Keyboard configured for external." })
end)
clientkeys = awful.util.table.join(
awful.key({ modkey, }, "f", function (c) c.fullscreen = not c.fullscreen end),
awful.key({ modkey, }, "q", function (c) c:kill() end),
awful.key({ modkey, "Control" }, "space", awful.client.floating.toggle ),
awful.key({ modkey, "Control" }, "Return", function (c) c:swap(awful.client.getmaster()) end),
awful.key({ modkey, }, "o", awful.client.movetoscreen ),
awful.key({ modkey, }, "t", function (c) c.ontop = not c.ontop end),
awful.key({ modkey, }, "n",
function (c)
-- The client currently has the input focus, so it cannot be
-- minimized, since minimized clients can't have the focus.
c.minimized = true
end),
awful.key({ modkey, }, "m",
function (c)
c.maximized_horizontal = not c.maximized_horizontal
c.maximized_vertical = not c.maximized_vertical
end)
-- Bind all key numbers to tags.
-- Be careful: we use keycodes to make it works on any keyboard layout.
-- This should map on the top row of your keyboard, usually 1 to 9.
for i = 1, 9 do
globalkeys = awful.util.table.join(globalkeys,
awful.key({ modkey }, "#" .. i + 9,
function ()
local screen = mouse.screen
local tag = awful.tag.gettags(screen)[i]
if tag then
awful.tag.viewonly(tag)
end
end),
awful.key({ modkey, "Control" }, "#" .. i + 9,
function ()
local screen = mouse.screen
local tag = awful.tag.gettags(screen)[i]
if tag then
awful.tag.viewtoggle(tag)
end
end),
awful.key({ modkey, "Shift" }, "#" .. i + 9,
function ()
local tag = awful.tag.gettags(client.focus.screen)[i]
if client.focus and tag then
awful.client.movetotag(tag)
end
end),
awful.key({ modkey, "Control", "Shift" }, "#" .. i + 9,
function ()
local tag = awful.tag.gettags(client.focus.screen)[i]
if client.focus and tag then
awful.client.toggletag(tag)
end
end))
end
clientbuttons = awful.util.table.join(
awful.button({ }, 1, function (c) client.focus = c; c:raise() end),
awful.button({ modkey }, 1, awful.mouse.client.move),
awful.button({ modkey }, 3, awful.mouse.client.resize))
-- Set keys
root.keys(globalkeys)
-- {{{ Rules
awful.rules.rules = {
-- All clients will match this rule.
{ rule = { },
properties = { border_width = beautiful.border_width,
border_color = beautiful.border_normal,
focus = awful.client.focus.filter,
keys = clientkeys,
buttons = clientbuttons,
size_hints_honor = false } },
{ rule = { class = "URxvt" },
properties = { opacity = 0.99 } },
{ rule = { class = "MPlayer" },
properties = { floating = true } },
{ rule = { class = "Dwb" },
properties = { tag = tags[1][1] } },
{ rule = { class = "Iron" },
properties = { tag = tags[1][1] } },
{ rule = { instance = "plugin-container" },
properties = { tag = tags[1][1] } },
{ rule = { class = "Gimp" },
properties = { tag = tags[1][4] } },
{ rule = { class = "Gimp", role = "gimp-image-window" },
properties = { maximized_horizontal = true,
maximized_vertical = true } },
-- {{{ Signals
-- Signal function to execute when a new client appears.
client.connect_signal("manage", function (c, startup)
-- Enable sloppy focus
c:connect_signal("mouse::enter", function(c)
if awful.layout.get(c.screen) ~= awful.layout.suit.magnifier
and awful.client.focus.filter(c) then
client.focus = c
end
end)
if not startup and not c.size_hints.user_position
and not c.size_hints.program_position then
awful.placement.no_overlap(c)
awful.placement.no_offscreen(c)
end
local titlebars_enabled = false
if titlebars_enabled and (c.type == "normal" or c.type == "dialog") then
-- buttons for the titlebar
local buttons = awful.util.table.join(
awful.button({ }, 1, function()
client.focus = c
c:raise()
awful.mouse.client.move(c)
end),
awful.button({ }, 3, function()
client.focus = c
c:raise()
awful.mouse.client.resize(c)
end)
-- Title in the middle
local middle_layout = wibox.layout.flex.horizontal()
local title = awful.titlebar.widget.titlewidget(c)
title:set_align("center")
middle_layout:add(title)
middle_layout:buttons(buttons)
local layout = wibox.layout.align.horizontal()
layout:set_middle(middle_layout)
awful.titlebar(c,{size=18}):set_widget(layout)
end
end)
-- No border for maximized clients
client.connect_signal("focus",
function(c)
if c.maximized_horizontal == true and c.maximized_vertical == true then
c.border_color = beautiful.border_normal
else
c.border_color = beautiful.border_focus
end
end)
client.connect_signal("unfocus", function(c) c.border_color = beautiful.border_normal end)
-- {{{ Arrange signal handler
for s = 1, screen.count() do screen[s]:connect_signal("arrange", function ()
local clients = awful.client.visible(s)
local layout = awful.layout.getname(awful.layout.get(s))
if #clients > 0 then -- Fine grained borders and floaters control
for _, c in pairs(clients) do -- Floaters always have borders
if awful.client.floating.get(c) or layout == "floating" then
c.border_width = beautiful.border_width
-- No borders with only one visible client
elseif #clients == 1 or layout == "max" then
clients[1].border_width = 0
else
c.border_width = beautiful.border_width
end
end
end
end)
end
function run_once(cmd)
findme = cmd
firstspace = cmd:find(" ")
if firstspace then
findme = cmd:sub(0, firstspace-1)
end
awful.util.spawn_with_shell("pgrep -u $USER -x " .. findme .. " > /dev/null || (" .. cmd .. ")")
end
run_once("nm-applet")
If someone can help me I'll be really thankful.
Best regards,
Georgi

This is weird behavior that I don't experience with Awesome and Atom. Does this happen only with Atom, or with anything? One aspect of your rc.lua that might cause something like this is the sloppy focusing, this bit here:
-- Enable sloppy focus
c:connect_signal("mouse::enter", function(c)
if awful.layout.get(c.screen) ~= awful.layout.suit.magnifier
and awful.client.focus.filter(c) then
client.focus = c
end
end)
Try disabling that, by commenting it out entirely, and see if the problem persists.
If it only happens with Atom, then maybe Atom conflicts for some reason with this sloppy focusing.

How can I keep my text format after pasting a text with a different format?

No matter when and where I start to write some text (whether it is a SImpleText, E-Mails, or anyother application's doc), if I have to cut and paste a text from a different source that is formatted differently than my original text (ie. the one I am already using ), once I have pasted the differently formatted text in my doc, the typeset changes while it continues to type with the same formatt used in the text I just pasted.
How can I continue typing with the same text formatt used before pasting the new text, after pasting the new text, without having to change size, font style etc. Is there a short cut?
What I have been doing to avoid this problem is: I usually type my entire text content (whether it is an E-Mail, or other doc) then, once I am done typing, I paste the text that was cut from a differently formatted document, so that my text remains with the same formatt in its integrity, while the pasted text stands out differently, but it is a bit complex doing that , because I not only have to remember to paste the other text when I am done typing (I run the risk of forgetting to paste the text I need to insert--which has happened already) or I keep struggling with my formatt change after the pasting of the new text, so my document text starts looking like the same text as the one which was just pasted.
Thanks for your time reading this!

KerrBr wrote:
How can I continue typing with the same text formatt used before pasting the new text, after pasting the new text, without having to change size, font style etc. Is there a short cut?
(1) First, let's make sure we're talking about the same thing. By "SImpleText, E-Mails" you mean TextEdit and Mail, right?
(2) Some apps (TextEdit, Mail) use the text engine provided by Mac OS X. By and large, these apps will behave in a similar manner. Others (eg, MS Word) use their own text engine, and their behaviour can be quite different. For such an app you need to consult its manual.
(3) In TextEdit, if you want the pasted text to adopt the current style, then use kurt188's tip.
(4) However, if you may want the pasted text to retain its own attributes, while you continue to type in the previous style. I don't know of any shortcut or command that will achieve this. However, you can try to work around it.
(4.1) TextEdit has the Copy Style (⌘⌥C) and Paste Style (⌘⌥V) commands. If you haven't yet used it, ⌘⌥V will insert the default style. So type, paste, ⌘⌥V, then continue typing. If you have used, it will insert whatever style was copied. You can, type, ⌘V, click somewhere before the pasted text, ⌘⌥C, click after the pasted text, ⌘⌥V, and continue typing.
(4.2) Alternatively, type your text. Then type one more character, eg, "x". Then ←, ⌘V, ⇧→, and start typing. The new text should adopt "x"'s format. (This should work in Mail, too. I don't know, because IMHO e-mail should always be plain text.)

How can I set a point size for staticTexts

Hi everyone
How can I set a point size for staticTexts?
    staticTexts.add({staticLabel:"Please select a tedious job"});
thanks
Teetan

Thank you Vandy
Thank you pixxxel schubser
And thank you Peter Kahrel
But Ho can call function for this script?
//======================================================================
Thank you Vandy
Thank you pixxxel schubser
And thank you Peter Kahrel
But Ho can call function for this script?
//======================================================================
var stringList = [
"01. digit at end: superscript",
"02. digit at beginning: superscript",
"03. notes applied to italic (table only)",
"04. Initial Cap+ markup",
"05. Small Cap + markup",
"06. del [ ] + markup",
"07. add an EM at beginning",
var win = new Window("dialog","Tedious Jobs_(\"TDJs\")");
this.windowRef = win;
win.grp = win.add ("group", undefined);
win.grp.alignChildren = "top";
win.grp.margins = 5;
win.grp2 = win.grp.add ("group", undefined);
win.grp2.orientation = "Column";
win.grp2.alignChildren = "left";
win.grp3 = win.grp.add ("group", undefined);
win.grp3.orientation = "Column";
win.grp3.alignChildren = "fill";
win.grp2.Txt1 = win.grp2.add ("statictext", undefined, "Please select a tedious job");
win.grp2.Txt1.indent = 0;
win.grp2.Ddl1 = win.grp2.add ("dropdownlist", undefined, stringList);
win.grp2.Ddl1.selection = 0;
win.grp2.sTxt1 = win.grp2.add ("statictext", undefined, "________________________________________");
win.grp2.sTxt3 = win.grp2.add ("statictext", undefined, "Be careful and pay attention in what you selected.");
win.grp2.sTxt3.graphics.font = ScriptUI.newFont ("Arial", "Regular", 10);
win.quitBtn = win.grp3.add("button", undefined, "Ok");
win.cancelBtn = win.grp3.add("button", undefined, "Cancel");
win.defaultElement = win.quitBtn;
win.cancelElement = win.cancelBtn;
win.quitBtn.onClick = function() {
win.close();
if (w.show() == 1) {
                var mRes = mStringList.selection.text;
                mSelection = mStringList.selection.index;
                app.insertLabel( "mDialog", mSelection.join() );    // to store dropDownList positions (as a string "," delimited)
                return mRes;
        } else { exit(); }
app.doScript('main()', ScriptLanguage.JAVASCRIPT, undefined, UndoModes.FAST_ENTIRE_SCRIPT, "TDJs");
function main(){
var myObject;
var myCheckSelection = false;
if(app.documents.length > 0){
if(app.selection.length > 0){
   switch(app.selection[0].constructor.name){
    case "InsertionPoint":
    case "Character":
    case "Word":
    case "TextStyleRange":
    case "Line":
    case "Paragraph":
    case "TextColumn":
    case "Text":
    case "Cell":
    case "Column":
    case "Row":
    case "Table":
mySelected = app.insertLabel( "mDialog", String(mySelection.selectedIndex) );     //     to remember selection’s set
if(app.selection && app.selection[0].hasOwnProperty ("tedious_works") );
      tedious_works();
else{
alert("Wrong selection. Please try again.");
function tedious_works() {
app.findGrepPreferences = app.changeGrepPreferences = null;
switch (mySelection.selectedIndex){
       case 1: {
   app.findGrepPreferences.findWhat = "^\\d";
   app.changeGrepPreferences.position = 1936749411;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
            break;
       case 2:{
   app.findGrepPreferences.findWhat = "(?i)\$note.+\$$";
   app.changeGrepPreferences.appliedCharacterStyle = "Italic";
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "（附[註注].+）$";
   app.changeGrepPreferences.appliedCharacterStyle = "Italic";
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
       break;
       case 3:{
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<a";
   app.changeGrepPreferences.changeTo = "A";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<b";
   app.changeGrepPreferences.changeTo = "B";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<c";
   app.changeGrepPreferences.changeTo = "C";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<d";
   app.changeGrepPreferences.changeTo = "D";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<e";
   app.changeGrepPreferences.changeTo = "E";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<f";
   app.changeGrepPreferences.changeTo = "F";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<g";
   app.changeGrepPreferences.changeTo = "G";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<h";
   app.changeGrepPreferences.changeTo = "H";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<i";
   app.changeGrepPreferences.changeTo = "I";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<j";
   app.changeGrepPreferences.changeTo = "J";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<k";
   app.changeGrepPreferences.changeTo = "K";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<l";
   app.changeGrepPreferences.changeTo = "L";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<m";
   app.changeGrepPreferences.changeTo = "M";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<n";
   app.changeGrepPreferences.changeTo = "N";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<o";
   app.changeGrepPreferences.changeTo = "O";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<p";
   app.changeGrepPreferences.changeTo = "P";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<q";
   app.changeGrepPreferences.changeTo = "Q";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<r";
   app.changeGrepPreferences.changeTo = "R";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<(?<!’)s";
   app.changeGrepPreferences.changeTo = "S";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<t";
   app.changeGrepPreferences.changeTo = "T";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<u";
   app.changeGrepPreferences.changeTo = "U";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<v";
   app.changeGrepPreferences.changeTo = "V";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<w";
   app.changeGrepPreferences.changeTo = "W";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<x";
   app.changeGrepPreferences.changeTo = "X";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<y";
   app.changeGrepPreferences.changeTo = "Y";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<z";
   app.changeGrepPreferences.changeTo = "Z";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
       break;
       case 4:{
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<A";
   app.changeGrepPreferences.changeTo = "a";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<B";
   app.changeGrepPreferences.changeTo = "b";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<C";
   app.changeGrepPreferences.changeTo = "c";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<D";
   app.changeGrepPreferences.changeTo = "d";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<E";
   app.changeGrepPreferences.changeTo = "e";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<F";
   app.changeGrepPreferences.changeTo = "f";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<G";
   app.changeGrepPreferences.changeTo = "g";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<H";
   app.changeGrepPreferences.changeTo = "h";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<I";
   app.changeGrepPreferences.changeTo = "i";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<J";
   app.changeGrepPreferences.changeTo = "j";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<K";
   app.changeGrepPreferences.changeTo = "k";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<L";
   app.changeGrepPreferences.changeTo = "l";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<M";
   app.changeGrepPreferences.changeTo = "m";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<N";
   app.changeGrepPreferences.changeTo = "n";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<O";
   app.changeGrepPreferences.changeTo = "o";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;

How do you automate the point size of page numbers in a generated index?

In Framemaker 10 I have a generated index for a book. The indexed items are in point size 10 but the generated page numbers come out in 12 pt.
Can I automate the page number size to be 10 pt?
I have tried defining a character tag IndexPage Numbers and entered the following on the index Reference page:
Level1IX
<IndexPageNumbers><$pagenum>
Level2IX
<IndexPageNumbers><$pagenum>
but this does produce the desired point size.
Thanks

Error,
I was just generating an index today and had this weird behavior. The level1IX, level2IX, and level3IX entries formatted as expected (TNR, 11pt, plain) but the markers and page numbers displayed as 24pt, bold, Arial which matched the IndexIX format. What is that format for anyway? My user guide does not mention its purpose.
I looked at the reference page and there was a paragraph formatted as IndexIX with this content:
<$pagenum>
It was 24pt, arial, bold, and centered.
Another manual had an index that formatted properly last week but it too had the above <$pagenum> tag. So it's confusing as to the different behavior.
I reformatted the <$pagenum>/IndexIX paragraph to TNR, 11pt, plain (in the index file), regenerated the index, and now the page number formatting matches the entry formatting.
Again, is IndexIX the format for the index page numbers only and why does Frame insert <$pagenum> in the Index spec. on the reference page?
Yours,
Michael F.
~~~~~~~~

Scaling text

Hello,
I have this very simple page with a symbol with rectangle as a background and text which will explain people what to do.
I apply the code from Sarah Hunt to scale my stage depending on the size of the browser window. It works ok. The button and the rectangle scales ok but the text
replaces itself !
When I try to use Responsive scale, the text scales ok but the page behaves on a strange way. Sometime it works sometimes it doesn't.
Thanks for any help.

Hi -
Yes, there are substantial differences between scaling text by resizing by using the wireframe and by changing the text size via the Controls tab for Text.
The use of the Controls Tab settings will produce much higher quality text than resizing via the wireframe method.
This will be more apparent when sizing the text larger, and less apparent when sizing the text smaller - but you should get in the habit of sizing with the Controls as in either case the text produced will be cleaner.
The reason for this is when you are manipulating the wireframe, you are manipulating text that has been rasterized at a particular size, and therefore suffers the same consequences as manipulating a video or still image clip.
When you adjust the Controls for size, you are adjusting +the source+ of the rasterized type - so make the type large via the Controls and the rasterized type will be created larger - as opposed to just stretched larger.
Hope this helps.
MtD

Incoming email from Muse website – point size

When my client receives a response from the Contact submission form on his website I constructed in Muse, it comes into his email in minuscule font size and is almost unreadable. He has tried changing the view to “largest” type size but that only alters the size of the heading, not the body text of the messages. Is there a way of controlling the point size of the text of the incoming email from Muse?

I posted this in someone else's question, but it answers the same problem. I just discovered this last night, so I'm hoping I can help other folks having the same issue!!
Question for you... do you use Outlook to retrieve your emails on a desktop PC? If so, then you're probably clearing the email server before your Treo can ping it & get your emails. I finally discovered this on my own after fighting with it for about 4 weeks. I use Outlook 2007, but would assume the path is somewhat the same for previous versions. Try this:
In Outlook, go to: Tools > Account Settings .. click on your email account & click "Change" .. click the "More Settings" button .. go to the Advanced tab .. click the button that says "Leave a copy of messages on the server", and then set the next option to "Remove from server after 2 days".
That did it for me. Hope it works for you!!
Cathy
Post relates to: Treo 755p (Sprint)

How do I increase the point size and change the font for the windows and boxes on Maverick such as the tiny print on the email inbox list of messages. Can increase size on the actual message but not on the list of messages.

How do I increase the point size in the dialog boxes and especially on the list of messages on email? I can increase the point size and font of actual messages content but not the LIST of emails in my inbox. They are too small for me to read.

This discussion is for computer built before 2006.
You could use a different mail app. Consider thunderbird.
It can be hard to find with community ( forum ) to post to. Here is an easy and complete list:
https://discussions.apple.com/community
I'll ask the host to move this post to M.
Robert

Scaled text point sizes different.

Similar Messages

Maybe you are looking for