SCAN IP

Hello
I have install a 2 nodes RAC 11gR2 with ASM on AIX 6.1
I am not using gns so i install using hosts files (problem with netwok admin)
IP configuration :
Node     IP     defined name
Aix_rac1     192.168.100.180     aix_rac1
Aix_rac1     172.16.21.180     rac1-priv
     192.168.100.102     rac-vip1
Aix_rac2     192.168.100.181     aix_rac2
Aix_rac2     172.16.21.181     rac2-priv
     192.168.100.103     rac-vip2
192.168.100.204     aix-scan
I try to connect from my laptop using a tnsnames
testscan =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.100.204)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = aix-scan)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = testscan)
I receive ORA-TNS-12545.
From the rac node it works well.
When i try to connect from my laptop i see in the log of the listener_scan1 on the rac server :
12-APR-2011 09:48:44 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=testscan)(CID=(PROGRAM=C:\app\product\11.2.0\ent_1\bin\sqlplus.exe)(HOST=MGRANEL-T500)(USER=MGranel))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.102.51)(PORT=55632)) * establish * testscan * 0
If i use the vip it s ok
If as os grid user i check the listener_scan1 it s ok.
Also srvctl command are ok
#srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node aix_rac1
#srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
So what happen when we connnect to the scan adress ,why it s not working?
Thank you for helping

Hi,
i think, your laptop cannot resolve the name aix-scan (not in DNS?).
TNS-12545 usually means that the name cannot be resolved.
The logfile entry
12-APR-2011 09:48:44 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=testscan)(CID=(PROGRAM=C:\app\product\11.2.0\ent_1\bin\sqlplus.exe)(HOST=MGRANEL-T500)(USER=MGranel))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.102.51)(PORT=55632)) * establish * testscan * 0will also occur when you connect via the VIP address, the VIP Listener will redirect to the Scan Listener.
For testing you should try in a CMD Window of your Laptop a "ping aix-scan". If you get a "could not find host" then your Laptop does not know the IP Adress of aix-scan and you have to use the IP Adress in your tnsnames.
The tnsnames in your Laptop should contain only one ADDRESS=... entry:
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.100.204)(PORT = 1521))or
(ADDRESS = (PROTOCOL = TCP)(HOST = aix-scan)(PORT = 1521))Greetings
Edit: just read the answer of Sebastian. His answer is right, the mine in wrong.
Sorry!
Edited by: 851415 on 12.04.2011 09:10

Similar Messages

HP LaserJet Enterprise 500 Color MFP M575 - Can't scan from Windows

We recently purchased and installed an HP LaserJet Enterprise 500 Color MFP M575 to be used as a networked all-in-one solution for a number of offices. I have been able to get it set up on our network and have installed the appropriate drivers on the requested Windows 7 x64 machines, and network printing works perfectly. However, it seems that despite the fancy scanning features available from the all-in-one itself (scan to email, scan to a network folder, etc.), I can't find any way to do an old-fashioned scan from Windows.
I have installed the full software solution available on the driver download page for the device, and while Windows lists the device as a "Multi Function Printer; Scanner" it does not recognize it as an actual scanner. The built-in Windows Fax and Scan simply reports that no scanners are installed. The software installation did not include the HP Solution Center (which I am used to seeing from my experience with various other HP all-in-one devices) or any equivalent for direct scanning. The driver download page for the device does not include any separate scanning drivers, so I can't be certain if they were included with the full installation or exist at all.Some of our staff also use Adobe Acrobat to scan, and even that fails to recognize the MFP as a scanner.
We'll eventually be setting up the device to scan directly to a network folder, but we need a fallback while IT takes their time getting it set up; I can't imagine that the simplest option is not available at all. I must be missing something here, any assistance would be greatly appreciated.
Edit: To add, I also ran the HP Print and Scan Doctor. Interestingly, it reports the device as a printer and only offers to "Fix Printing" without any sort of resolution for my scanning problem.

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

Cannot send email from scanned pages

I am having trouble with the updated HP remote app on Ipad, since the update I can scan the pages in, but then cannot send them via email. This is qute important because i work remotley from the office and rely on getting my design drawings in on a nightly basis
please help

cannot send email from scanned pages

Malicious or not? Message popped up: Mozilla security found (something like too much, forget exact word) activity on your computer so it will do a fast scan of system file. With OK button.

I was looking at youtube.com, which always tells me my browser is not supported and recommends I download Firefox, but that is what I was using, so I went to Firefox to check for updates. (I think I also had freecycle.org open.) Then this message popped up in a new page: Mozilla security found (something like "too much", forget exact word) activity on your computer so it will do a fast scan of system file. There was an OK button. The page address was: http://update17.stegner.ce.ms/index.php?Q7Lhl9ShbRxGJXpkM1VLSi4ZE8H4pTedoVPySgeppM3VpC+thEspcFG7qxHgn1pdsC2h5ygPGWI3t5hXqMzL9EQaZZ3J1e3CKXgCb0Qp. I did not click OK but copied the link and closed the window which closed the internet. I have never seen this before and would like to know if it is really Mozilla or possibly something malicious. Thank you.

Good catch. That almost certainly is an invitation to download malware.
There are a lot of infected web sites pushing "fake antivirus" software. If you have any doubts about whether your system might have become infected, you can supplement your regular security software with these two highly regarded scanners:
Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
SUPERAntiSpyware : http://www.superantispyware.com/

Scanned items go to wrong folder

I was scanning old photos and all at once they were sent to a temp folder not in my Adobe Photoshop Elements 9. Does anyone know what got changed?

Check your preference settings.
In the Organizer click Edit à Preferences à Scanner

HP AiO Remote app will not recognize scan and copy function of HP Envy 120

Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these functions were available in the app only for printers which provide these features. But HP Envy 120 has both scanner and copier. And last time it worked. Some idea what could have happened here? Thanks. UJ

Replied on: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-AiO-Remote-will-n...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP AiO Remote will not recognize scan and copy function of HP Envy 120 printer

Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these functions were available in the app only for printers which provide these features. But HP Envy 120 has both scanner and copier. And last time it worked. Some idea what could have happened here? Thanks. UJ

Hi UJKarl, welcome to the HP Forums. You should be able to scan from the HP AIO Remote App on your Envy 120 printer. You probably just need to power cycle the printer, iPad and router to regain proper function.
Turn off your printer with the power button. Power down the iPad by holding the sleep button down until you get the option to 'slide to power off'. Then disconnect the power cord to your router and count to about 10, and then plug it back in. Once the router comes back online, turn the printer on. When the printer comes back online (blue wi-fi light stops blinking), then power the iPad back up. Try again, and it should work.
Let me know how it turns out.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Hp aio remote app on iPhone won't scan to my hp photosmart 7515

hp aio remote app "there was a problem during scanning. check scanner and try again" when using hp photosmart 7515 however this is a new issue the app scanning worked before. Also I can no longer print or scan unless at home and connected to my network

Hello @mbranch37,
Welcome to the HP forums.
I understand that you are having a problem with the AIO app, as well as what sounds like a web services issue.
I would like to help.
Before working with the app, I would like to make sure the printer is fine.
On the front panel of your printer touch the Web Services icon. (also known as the ePrint button)
If you get a server connection error, I would set a manual DNS.
The following post by happytohelp01, has instructions for setting the manual DNS.
If for some reason the printers email or ePrint address has changed, you will have to set it up again.
If the email is the same and you do not get any error messages, try cycling your network.
Turn off the printer and other network devices.
Unplug the power to your router for at least a minute.
Plug the power cord back into the router.
Turn on all your network devices.
Wait until the blue wireless light on your printer stops blinking.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

AiO Remote iOS app -scanning A4

I have a Photosmart 5515 All in One printer and have been using the iOS app AiO Remote app to scan in some A4 pages. I set the app to scan to a document and also the page size to A4. Looking at the resultant document it has scaled the the document down. It has centralised the document but you end up with margins of a couple of inches all round.
Has anyone else noticed this?
Does anyone know how to overcome this?

Hi Rturner003,
Welcome to the HP Support forums. I understand that you are encountering difficulties when scanning A4 documents with HP's All-in-One Printer Remote app.
I did some testing on this with an iPad and 3 different ePrint capable printers and each time I was able to recreate it. However that doesn't mean we are kippered. I have included a link to a post on the forums and the key part for you to get your A4 scanned document to print the document as you require, please follow step 3 after you have scanned the image. The key is to pinch the image to the size you would like.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Scanning multiple pages from 5520 to iPad.

I can scan single pages on 5520 to iPad using AiO Remote app but cannot figure out how to get them into one file. Any suggestions would be appreciated.

Hi,
After touch "No, I'm done" you can save all 4 xxx_1, xxx_2, xxx_3 and xxx_4 (xxx normally date and time) files on ONE file by touching pdf at the top right. You can give it a name and it will have all 4 pages.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Edit scanning size

Hi. I downloaded AiO Remote app for my iPad. It has connected fine, but I was wondering if there is a way to alter the size of a document that I have scanned from my printer to my iPad. It did give me a size option which I thought would have been fine as it said A4, but when I later printed it from my iPad to the same printer, it was about 1/3rd the size of the A4 sheet of paper.
Thanks

Hi,
You have to select the size of the original, not the size of the glass.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

7515 ios 8 scanning doesn't function using document feeder

My AiO remote updated on my iPad today and i have issues scanning from the scanner. The printer and tablet functions properly when scanning using the glass however when using the document feeder, AiO remote scans the sheets then before saving it says there is a problem with the scanner, check the scanner. not sure why it works with the glass and NOT with the feeder.

I am having the exact same problem. I will add that scanning from the document feeder to my Mac Book works fine. The problem with the document feeder is only whenn atttempting to use the AiO software on my iPad.

Why is it not possible to "scan duplex" on the AIO Remote-App

Today I was trying to scan a few letters with front and backside via the AIO-App.
Unfortunately it's neither with the Android-App nor with the iPhone-App nearly as comfortable as with the PC. You always need to sort the scans manually - and with the screensize of e.g. an iPhone this isn't fun at all...
Could you please support an automatic sorting mechanism as featured on the normal PC-client?!?
Best regards,
Batschi

I would like to add to this question/request. I, too, am using iOS 8 from iPhone and iPad connected to an HP Officejet Pro 8500A.
Also, it is infuriating that there is no deafault paper size: in Europe, we use A4; Letter is a purely US size that we never see, this side of the Pond. Please incorporate a feature that will allow a forced default rather than reverting to Letter every time the app is opened.
Thank you.
P.S. If an element of HTML code appears at the end of this post, please disregard: I have no idea how/why it has become attached and trying to edit it out after posting just adds the code back in!<script src="safari-extension://com.ebay.safari.myebaymanager-QYHMMGCMJR/8797967e/background/helpers/prefilterHelper.js" type="text/javascript"></script>

Thunderbird fails to send email when "Scan email for junk mail" option is checked in Server Admin

I have 2 clients that need to send mail through my server, one Mac and one Windows. The Mac uses apple mail and the Windows machine uses Thunderbird.
Apple Mail will send fine, it is set up for "Use Default ports 25, 465, 587" and "Use SSL" and "Authentication: MD5 Challenge-response".
Thunderbird refuses to send and I don't even see any errors showing up in the Console on the OS X server under smtpd entries.
If I uncheck the "Scan email for junk mail" option on the server, then Thunderbird will send fine.
Thunderbird is set up as: "smtp port 587 (default)" "connection security: STARTTLS" "Authentication method: Encrypted Password"
May or may not be relevant: I use virtual domains as well as aliases.
Server: Mac OS X Server version 10.5.8

Solved it, looks like maybe the smtpd settings for sasl authentication may not have been correct. I followed everything in http://osx.topicdesk.com/content/view/38/41/ the "Frontline Spam Defense for OS X server" guide and now can send mail just fine from Thunderbird Winodws and from Apple Mail.

Problem with scanning and memory usage

I'm running PS CS3 on Vista Home Premium, 1.86Ghz Intel core 2 processor, and 4GB RAM.
I realise Vista only sees 3.3GB of this RAM, and I know Vista uses about 1GB all the time.
Question:
While running PS, and only PS, with no files open, I have 2GB of RAM, why will PS not let me scan a file that it says will take up 300Mb?
200Mb is about the limit that it will let me scan, but even then, the actual end product ends up being less than 100Mb. (around 70mb in most cases)I'm using a Dell AIO A920, latest drivers etc, and PS is set to use all avaliable RAM.
Not only will it not let me scan, once a file I've opened has used up "x" amount of RAM, even if I then close that file, "x" amount of RAM will STILL be unavaliable. This means if I scan something, I have to save it, close PS, then open it again before I can scan anything else.
Surely this isn't normal. Or am I being stupid and missing something obvious?
I've also monitored the memory usage during scanning using task manager and various other things, it hardly goes up at all, then shoots up to 70-80% once the 70ishMb file is loaded. Something is up because if that were true, I'd actually only have 1Gb of RAM, and running Vista would be nearly impossible.
It's not a Vista thing either as I had this problem when I had XP. In fact it was worse then, I could hardly scan anything, had to be very low resolution.
Thanks in advance for any help

55%, it's still 1.6Gb....there shouldn't be a problem scanning something that it says will take up 300Mb, then actually only takes up 70Mb.
And not wrong, it obviously isn't releasing the memory when other applications need it because it doesn't, I have to close PS before it will release it. Yes, it probably is supposed to release it, but it isn't.
Thank you for your answer (even if it did appear to me to be a bit rude/shouty, perhaps something more polite than "Wrong!" next time) but I'm sitting at my computer, and I can see what is using how much memory and when, you can't.

TS3147 After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple,"

After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple," This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.

rjliii wrote:
Solved problem with original Canon software. When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
You should still use Image Capture IMHO. If it was my gear, that's what I would do. No need to worry about software upgrades.

SCAN IP

Similar Messages

Maybe you are looking for