Scattering Data Across Table Space

Hi Guys,
We have System Performance team who checks the performance of our product .As per them there are few tables which they are concurrently updating(For the performance check) and due to being the tables in the same table space the insert is taking long time and CPU wait spikes under high concurrent user load.
I am wondering is it the problem of many tables in the same table space or some thing differernt.
We are using Oracle 11g Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production.
Please share any ideas or thoughts if any body has encountered this problem already.
Thanks in advance.
Regards,
Papi

957590 wrote:
We have System Performance team who checks the performance of our product .As per them there are few tables which they are concurrently updating(For the performance check) and due to being the tables in the same table space the insert is taking long time and CPU wait spikes under high concurrent user load.
I am wondering is it the problem of many tables in the same table space or some thing differernt.
Your performance team haven't told you enough about what they're doing to give you any sensible ideas about their problem.
If we assume that they understand nearly everything they're doing, and are looking in the right place at the right time, then there is a possibility that their problem is too much activity on a single tablespace, but the problem would be platform dependent and also be affected by the Oracle configuration.
Assume that they are using a file system for the Oracle data files, have just one file for the critical tablespace, and have configured multiple db writers (or writer slaves) and aren't using the O/S direct I/O and async features (which typically means they've not set Oracle's parameter filesystem_io_options to "setall") then they could be seeing inode contention for the relevant file and that could result in lots of CPU spinning. (At the file system level, readers block writers, writers block readers).
If you want to start understanding what their problem is, get them to show you an AWR report generated over a short interval, and get them to explain exactly what their test was doing in that interval.
Regards
Jonathan Lewis

Similar Messages

  • Grants across table spaces

    I'm trying to write a report that selects data from two schemas in two different HTMLDB tablespaces (or workspaces). How do I gain access from one workspace to the other? I've tried dblink and grants, but I'm unable to see users from one workspace to grant to, or see the schema from the other workspace.
    Jim

    Jim - Are you saying that when you use some of the wizards to create a report you cannot see objects in schemas other than the parsing schema of the current application? You don't need dblinks if everything is in the same database, but you do need to grant select on each table, view, etc., that you might want to access from your application and these must be direct grants and not through roles.
    Scott

  • Storing XML across tables

    Can the XML SQL Utility store XML data across tables? Or should
    I be using another utility? Ideally, I would like the process to
    be automatic - is this ability available yet? Or should I parse
    the XML data and insert by hand?
    sorry for all the questions!
    thanxs,
    Steve.
    null

    Hi Steve,
    Currently the XML utility can only store to a single table. It
    maps a canonical representation of an XML document into any
    table/view. You can use XSL to transform any document into
    multiple documents and insert them separately.
    Another way is to define views over the multiple tables (object
    views if needed) and then do the inserts etc.. into the view. If
    the view is inherently non-updatable (because of complex joins
    etc..), then u can define INSTEAD-OF triggers over the view to
    handle the DML appropriately.
    Thx
    Murali
    Steve Bartlett (guest) wrote:
    : Can the XML SQL Utility store XML data across tables? Or
    should
    : I be using another utility? Ideally, I would like the process
    to
    : be automatic - is this ability available yet? Or should I
    parse
    : the XML data and insert by hand?
    : sorry for all the questions!
    : thanxs,
    : Steve.
    null

  • Create table space command with no specification of data file path.

    I am using following command for creating table space in oracle 11g
    CREATE TABLESPACE testTbSpace DATAFILE 'dataFileName.dbf' SIZE 50M REUSE AUTOEXTEND ON NEXT 1M MAXSIZE 32767M NOLOGGING"
    But it is creating datafile dataFileName.dbf at disk at following path
    echo $ORACLE_HOME/dbs
    I dont want to create datafile at this path and also dont want to specify data file path in 'create table space' command.
    Is there is any parameter,which i can set and above command start to create dataFileName.dbf at that path
    Edited by: user8680179 on May 15, 2012 1:54 AM

    user8680179 wrote:
    i issued following commands from 'SYS' user;
    1. show parameter db_create_file_dest;
    NAME TYPE VALUE
    db_create_file_dest string
    2.alter system set db_create_file_dest='dataFilePath';
    System altered.
    3.show parameter db_create_file_dest;
    NAME TYPE VALUE
    db_create_file_dest string dataFilePath
    4.CREATE TABLESPACE testTbSpace2 DATAFILE 'test1.dbf' SIZE 50M REUSE AUTOEXTEND ON NEXT 1M MAXSIZE 32767M NOLOGGING;
    Tablespace created.
    But still my test1.dbf file is creating at old path($ORACLE_HOME/dbs)Is datafilepath a real location? I don't think so! Give a proper path like "d:\oracle\" and retry.
    Aman....

  • Table Space showing wrong data in ST04

    Hi All,
    We have oracle 10.2.0.4 installed and SAP SRM with latest kernel.
    When i login to SAP and check tablespace in st04 / DB02 it is showing PSAPSR3 TAble space auto extend as on, but i have deactivated the auto extend in all the table space.
    And for the same thing in DB check it is showing as CRITICAL_TABLESPACE having auto extend on as warning.
    Please let me know as it is creating problem in daily monitoring of the system
    Thanks & Regards,
    Balaji.S

    Can you once again check the value for max_extn for those table space?
    This error by brconnect is checked by calculating max_extn.
    You can also check Note 849484 - New CRITICAL_TABLESPACE check condition in BRCONNECT
    Thanks and Regards
    Anindya

  • What is difference between table space and shchema

    what is difference between table space and shchema ?

    784633 wrote:
    so each user has it own space of tables - schema ?yes, but let's clarify a bit ....
    The "schema" is the collection of all objects owned by a particular user. So if user SCOTT creates two tables, EMP and DEPT, and a view EMP_RPT, and a procedure GET_MY_EMP, those objects (tables, views, procedures) collectively make up the SCOTT schema.
    Those objects will be physically stored in a tablespace.
    A tablespace is a named collection of data files. So tablespace USERS will be made up of one or more data files. A specific datafile can belong to one and only one tablespace. If a tablespace has more than one data file, oracle will manage those files as a collection invisible to the application - much like the OS or disk subsystem handles striping across multiple physical disks.
    A specific object in the SCOTT schema can exist in only one tablespace, but not all objects of the schema have to be in the same tablespace. Likewise a tablespace can contain objects from multiple schemas.
    and can one user to access tables of other users?As others have said - FRED can access tables belonging to SCOTT as long has SCOTT has granted that access to FRED.

  • How to stored data after clicking checkbox in data base table

    REPORT  ZT                                      .
    TYPE-pools: slis.
    tables:mkpf,mseg,mard,COWB_COMP,ZTABLE.
    Types:BEGIN OF tp_data,
         mblnr LIKE mseg-mblnr,
         matnr LIKE mseg-matnr,
         werks LIKE mard-werks,
         lgort LIKE mard-lgort,
         lgpbe LIKE mard-lgpbe,
         charg LIKE mseg-charg,
         bwart LIKE mseg-bwart,
         budat LIKE mkpf-budat,
         menge LIKE mseg-menge,
         meins LIKE mseg-meins,
         kostl LIKE mseg-kostl,
         aufnr LIKE mseg-aufnr,
         rsnum LIKE mseg-rsnum,
         endkz like COWB_COMP-endkz,
    END OF tp_data,
    tp_tbl_data TYPE STANDARD TABLE OF tp_data.
    MODIFIED*******************
    DATA: WA TYPE TP_DATA.
    MODIFIED*******************
    *data: t_data like Y00_MM_ISSUE_DAT occurs 0 with header line.
    Constants
    Data objects (variable declarations and definitions)
    Report data to be shown.
    DATA: it_data TYPE STANDARD TABLE OF tp_data.
    MODIFIED*******************
    DATA : V_REPID LIKE SY-REPID.
    MODIFIED*******************
    Heading of the report.
    DATA: t_heading TYPE slis_t_listheader.
    *========================== Selection Screen
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
                  smatnr FOR mseg-matnr MODIF ID m2,
                  swerks FOR mard-werks MODIF ID m3,
                  slgort FOR mard-lgort MODIF ID m4,
                  slgpbe FOR mard-lgpbe MODIF ID m5,
                  scharg FOR mseg-charg MODIF ID m6,
                  sbwart FOR mseg-bwart MODIF ID m7,
                  skostl FOR mseg-kostl MODIF ID m8,
                  saufnr FOR mseg-aufnr MODIF ID m9,
                  srsnum FOR mseg-rsnum MODIF ID m10.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
              pse RADIOBUTTON GROUP radi,
              bps RADIOBUTTON GROUP radi.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
    PARAMETER:layout TYPE i.
    SELECTION-SCREEN END OF BLOCK b3.
    MODIFIED*******************
    INITIALIZATION.
    V_REPID = sy-repid.
    MODIFIED*******************
    *=========================== Event Blocks
    AT selection-SCREEN.
    start-OF-selection.
    PERFORM get_data USING it_data.
    END-OF-selection.
    PERFORM build_alv USING it_data t_heading.
    *=========================== Subroutines
    *&      Form  get_data
          Gets the information to be shown in the report.
    FORM get_data USING t_data TYPE tp_tbl_data.
    SELECT msegmblnr msegmatnr mardwerks mardlgort mard~lgpbe
    msegcharg msegbwart mkpf~budat
       msegmenge  msegmeins msegkostl msegaufnr mseg~rsnum
    INTO CORRESPONDING FIELDS OF TABLE t_data
    FROM mseg
    JOIN mard ON mardmatnr EQ msegmatnr
                  JOIN mkpf ON msegmblnr EQ mkpfmblnr
                  WHERE mseg~matnr IN smatnr.
    ENDFORM.                    " get_data
    *&      Form  build_alv
          Builds and display the ALV Grid.
    FORM build_alv USING t_data TYPE tp_tbl_data
         t_heading  TYPE slis_t_listheader.
    ALV required data objects.
    DATA: w_title   TYPE lvc_title,
           w_comm    TYPE slis_formname,
           w_status  TYPE slis_formname,
           x_layout  TYPE slis_layout_alv,
           t_event    TYPE slis_t_event,
           t_fieldcat TYPE slis_t_fieldcat_alv,
           t_sort     TYPE slis_t_sortinfo_alv.
    REFRESH t_fieldcat.
    REFRESH t_event.
    REFRESH t_sort.
    CLEAR x_layout.
    CLEAR w_title.
    Field Catalog
    PERFORM set_fieldcat2 USING:
           1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space
    space space space space space space t_fieldcat ,
           2 'MATNR' 'MATNR' 'MSEG' space space space space space space
    space space space space space space  t_fieldcat ,
           3 'WERKS' 'WERKS' 'MARD' space space space space space space
    space space space space space space  t_fieldcat,
           4 'LGORT' 'LGORT' 'MARD' space space space space space space
    space space space space space space t_fieldcat ,
           5 'LGPBE' 'LGPBE' 'MARD' space space space space space space
    space space space space space space t_fieldcat ,
           6 'CHARG' 'CHARG' 'MSEG' space space space space space space
    space space space space space space t_fieldcat ,
           7 'BWART' 'BWART' 'MSEG' space  space space space space space
    space space space space space space t_fieldcat,
           8 'BUDAT' 'BUDAT' 'MKPF' space  space space space space space
    space space space space space space t_fieldcat,
           9 'MENGE' 'MENGE' 'MSEG' space  space space space space space
    space space space space space space t_fieldcat,
           10 'MEINS' 'MEINS' 'MSEG' space  space space space space space
    space space space space space space t_fieldcat,
           11 'KOSTL' 'KOSTL' 'MSEG' space  space space space space space
    space space space space space space t_fieldcat,
           12 'AUFNR' 'AUFNR' 'MSEG' space  space space space space space
    space space space space space space t_fieldcat,
           13 'RSNUM' 'RSNUM' 'MSEG' space  space space space space space
    space space space space space space t_fieldcat,
       14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
    Layout
    x_layout-zebra = 'X'.
    Top of page heading
    PERFORM set_top_page_heading USING t_heading t_event.
    Events
    PERFORM set_events USING t_event.
    GUI Status
    w_status = ''.
    User commands
    w_comm   = 'USER_COMMAND'.
    Order
    Example
    PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
    PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
    PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
    PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
    Displays the ALV grid
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
       i_callback_program       = V_REPID
       it_fieldcat              = t_fieldcat
       is_layout                = x_layout
       it_sort                  = t_sort
       i_callback_pf_status_set = w_status
       i_callback_user_command  = w_comm
       i_save                   = 'X'
       it_events                = t_event
       i_grid_title             = w_title
    TABLES
       t_outtab                 = t_data
    EXCEPTIONS
       program_error            = 1
       OTHERS                   = 2.
    IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
       WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDFORM.                    " build_alv.
    *&      Form  set_top_page_heading
          Creates the report headings.
    FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
         t_events  TYPE slis_t_event.
    DATA: x_heading TYPE slis_listheader,
           x_event   TYPE LINE OF slis_t_event.
    Report title
    CLEAR t_heading[].
    CLEAR x_heading.
    x_heading-typ = 'H'.
    x_heading-info = 'Reporte Prueba'(001).
    APPEND x_heading TO t_heading.
    Program name
    CLEAR x_heading.
    x_heading-typ = 'S'.
    x_heading-KEY = 'Program: '.
    x_heading-info = sy-repid.
    APPEND x_heading TO t_heading.
    User who is running the report
    CLEAR x_heading.
    x_heading-typ = 'S'.
    x_heading-KEY = 'User: '.
    x_heading-info = sy-uname.
    APPEND x_heading TO t_heading.
    Date of execution
    CLEAR x_heading.
    x_heading-typ = 'S'.
    x_heading-KEY = 'Date: '.
    WRITE sy-datum TO x_heading-info.
    APPEND x_heading TO t_heading.
    Time of execution
    CLEAR x_heading.
    x_heading-typ = 'S'.
    x_heading-KEY = 'Time: '.
    WRITE sy-uzeit TO x_heading-info.
    APPEND x_heading TO t_heading.
    Top of page event
    x_event-name = slis_ev_top_of_page.
    x_event-FORM = 'TOP_OF_PAGE'.
    APPEND x_event TO t_events.
    ENDFORM.
    *&      Form  set_events
          Sets the events for ALV.
          The TOP_OF_PAGE event is alredy being registered in
          the set_top_page_heading subroutine.
    FORM set_events USING t_events TYPE slis_t_event.
    DATA: x_event   TYPE LINE OF slis_t_event.
    Example
    clear x_event.
    x_event-name = .
    x_event-form = .
    append x_event to t_event.
    ENDFORM.
    *&      Form  set_order
          Adds an entry to the order table.
    FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
         t_sort TYPE slis_t_sortinfo_alv.
    DATA: x_sort TYPE slis_sortinfo_alv.
    CLEAR x_sort.
    x_sort-fieldname = p_fieldname.
    x_sort-tabname   = p_tabname.
    x_sort-UP = p_up.
    x_sort-down = p_down.
    x_sort-subtot = p_subtot.
    APPEND x_sort TO t_sort.
    ENDFORM.                    "set_order
    *&      Form  set_fieldcat2
          Adds an entry to the field catalog.
    FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname
    p_ref_tabname
         p_outputlen p_noout
         p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
         p_hotspot p_showasicon p_checkbox p_edit
         p_dosum
         t_fieldcat TYPE slis_t_fieldcat_alv.
    DATA: wa_fieldcat TYPE slis_fieldcat_alv.
    CLEAR wa_fieldcat.
    General settings
    wa_fieldcat-fieldname = p_fieldname.
    wa_fieldcat-col_pos = p_colpos.
    wa_fieldcat-no_out = p_noout.
    wa_fieldcat-HOTSPOT = p_hotspot.
    wa_fieldcat-CHECKBOX = p_checkbox.
    wa_fieldcat-ICON = p_showasicon.
    wa_fieldcat-do_sum = p_dosum.
    Set reference fieldname, tablenam and rollname.
    If p_ref_tabname is not given, the ref_fieldname given is a data
    *element.
    If p_ref_tabname is given, the ref_fieldname given is a field of a
    *table. In case ref_fieldname is not given, it is copied from the
    *fieldname.
    IF p_ref_tabname IS INITIAL.
       wa_fieldcat-rollname =   p_ref_fieldname.
    ELSE.
       wa_fieldcat-ref_tabname = p_ref_tabname.
       IF p_ref_fieldname EQ space.
         wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
       ELSE.
         wa_fieldcat-ref_fieldname =   p_ref_fieldname.
       ENDIF.
    ENDIF.
    Set output length.
    IF NOT p_outputlen IS INITIAL.
       wa_fieldcat-outputlen = p_outputlen.
    ENDIF.
    Set text headers.
    IF NOT p_seltext_m IS INITIAL.
       wa_fieldcat-seltext_m = p_seltext_m.
    ENDIF.
    IF NOT p_seltext_l IS INITIAL.
       wa_fieldcat-seltext_l = p_seltext_l.
    ENDIF.
    IF NOT p_seltext_s IS INITIAL.
       wa_fieldcat-seltext_s = p_seltext_s.
    ENDIF.
    IF NOT p_reptext_ddic IS INITIAL.
       wa_fieldcat-reptext_ddic = p_reptext_ddic.
    ENDIF.
    IF NOT p_ddictxt IS INITIAL.
       wa_fieldcat-ddictxt = p_ddictxt.
    ENDIF.
    Set as editable or not.
    IF NOT p_edit IS  INITIAL.
       wa_fieldcat-INPUT     = 'X'.
       wa_fieldcat-EDIT     = 'X'.
    ENDIF.
    APPEND wa_fieldcat TO t_fieldcat.
    ENDFORM.                   "set_fieldcat2
    *&      Form  top_of_page
          Called on top_of_page ALV event.
          Prints the heading.
    FORM top_of_page.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
         i_logo             = 'TRVPICTURE04'
       it_list_commentary = t_heading.
    ENDFORM.                    " alv_top_of_page
    *&      Form  user_command
          Called on user_command ALV event.
          Executes custom commands.
    FORM user_command USING r_ucomm     LIKE sy-ucomm
         rs_selfield TYPE slis_selfield.
    case sy-ucomm.
    WHEN '&DATA_SAVE'.
    LOOP AT IT_DATA INTO WA WHERE ENDKZ = 'X'.
       IF WA-ENDKZ = 'X'.
    *******MODIFIED*********************************
    U DELETE THIS CODE N USER UR INSERT CODE TO CHECK
    SY-MSGV1 = WA-MBLNR.                              " U CAN DELETE
    SY-MSGV2 = WA-MATNR.                              " U CAN DELETE
    MESSAGE ID 'BC_BOR' TYPE 'I' NUMBER '888'          " U CAN DELETE
            WITH SY-MSGV1 SY-MSGV2. " U CAN DELETE
    *******MODIFIED*********************************
       INSERT ZTABLE.
       ENDIF.
    endloop.
    ENDCASE.
    ENDFORM.                    "user_command
    this is my code, database will stored in fields only.data is empty,
    how to slove that one,send any sugestion.

    Hi Lakshmi,
           Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
    Regards,
      Jayaram...

  • BRtools table space creation error

    hi,
    Iam trying to create new table space in my R/3 system. When i went to brtools - space management sytem throwing error owner failed.I tried with all users to login like ( <SID>adm,administrator etc ...)even then same problem.Could you please suggest how to create table space with what login id
    Error:
    Main options for creation of tablespace in database WA6
    1 - Tablespace name (tablespace) ......... [PSAPECDATA]
    2 - Tablespace contents (contents) ....... [data]
    3 - Segment space management (space) ..... [auto]
    4 - SAP owner of tablespace (owner) ...... [EC5ADM]
    5 - Data type in tablespace (data) ....... [both]
    6 # Joined index/table tablespace (join) . []
    Standard keys: c - cont, b - back, s - stop, r - refr, h - help
    BR0662I Enter your choice:
    c
    BR0280I BRSPACE time stamp: 2006-06-14 21.08.45
    BR0663I Your choice: 'c'
    BR0259I Program execution will be continued...
    BR0824E Owner EC5ADM not found in database or not SAP owner
    BR0691E Checking input value for 'owner' failed
    BR0669I Cannot continue due to previous warnings or errors - you can go back to
    repeat the last action
    BR0280I BRSPACE time stamp: 2006-06-14 21.08.45
    BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
    Please suggest.
    - Cheers

    Login as ora<sid> and run brtools. Tablespace owner will be SAP<SID> or SAPR3 depends upon your version.
    Thanks
    Prince

  • Table space not reduce after delete in oracle 11G

    Hi Team,
    I have a DB 11.1.0.7 on unix.
    I have execute delete tables on tablespace, but this not reduce.
    Thanks

    935299 wrote:
    What segment space management type is defined for the tablespace in question?
    MANUAL
    Then you should check out the documentation some more.
    But even if you shrink the table segement what is that going to do for the data file size?
    I don't undertand you.
    ThanksYour thread is titled "Table space not reduce after delete in oracle 11G" which implies to me that you are interested in reducing the size of a tablespace (which really means reducing the size of the underlying datafile(s)).
    So, if you shrink the size of the sys.aud$ table, will that cause the datafile(s) to become smaller? Will it accomplish your goal? What else, if anything, needs to happen?

  • Table space not reduce after delete in oracle 10g

    Hi..
    Based on my system, i have found that my oracle table space did not reduce after the deletion query. Why ?.. Could somebody help me. As your info, I am using oracle 10g.
    Thank you,
    Baharin

    After Delete the table space will not be set free. high water mark will not be reset. to regain the space you need to recognize the objects from which you deleted the data. This can be done in many ways.
    1) Move the objects.
    Alter table temp move --> optionally tablespace clause can be used. After this you need to rebuild table indexes.
    2) With 10g table can be shrinked or reorganize to free the space.
    alter table mytable enable row movement;
    alter table mytable shrink space;
    3) Export/Import
    export the objects and drop and recreate with import.

  • Sales order purchase order field is updated with dots in data base table

    HI
    we have problem in  Production when sale order created
    P O date is update with dots and these dots  we are unable to see at screen and data base table
    we go t change mode of the order and delete the P O field with back space (button)  and saving the order
    when we see the change log of the order
    there it is sowing
    Old value            =        "       .   .     "           
    New Value         =       " 00.00.0000"
    Can any one give the suggetions to come out of this problem
    This is we have noticed with only two customers
    Thanks and regards
    Kishore
    Edited by: DevarapalliKK on Oct 23, 2010 8:43 PM
    Edited by: DevarapalliKK on Oct 23, 2010 8:44 PM

    Hi Kishore,
    Two things could have happened:
    1) Since this is happening with only two customers - I am sure it has got to do with some custom code on your system which is causing this problem. I 'd suggest you to create a new order with all the fields
    2) It could be a bug with SAP- might want to check relevant SAP Notes. ( But this could not be a reason, if yes should have had the same prob with all cusotmers)
    regards
    sadhu kishore

  • Help to correct to codes to move data from tables! please help!

    HI,
    There is a internal table t and t1. I used loop to move the data which zuonr has no value from t to t1.
    BSID TABLE:
    KUNNR                 ZUONR
    0000052984         no value                            &#12288;&#12288;&#12288;&#12288;&#12288;&#12288;&#12288;&#12288;&#12288;  0000052984          no value                                            00052984              2007/06&#27770;&#31639;
    00052984               no value
    000052984          &#12288;2007/07&#25391;&#24403;      
    0000052984            MSFT047/07
    0000052984           MSFT061/07
    *what I need to do is that to move all the data belonge to the same kunnr whenever zuonr = space happend. *.
    The problem is that the data which zuonr = space is moved to t1 successful, but the other data which belong to the same kunnr has zuonr valune still remain.
    -Question_ : How to move all the data belong to the same kunnr whenever zuonr = space happend.
    DATA: BEGIN OF t OCCURS 0,
            bukrs   LIKE knb1-bukrs,
            zuonr   Like bsid-zuonr,                        "sort key  "CR01
            belnr   LIKE bsid-belnr,
            kunnr   LIKE kna1-kunnr,
            bldat   LIKE bsid-bldat,
            budat   LIKE bsid-budat,
            netdt   LIKE bsega-netdt,
            waers   LIKE bsid-waers,
            wrbtr   LIKE bsid-wrbtr,
            shkzg   LIKE bsid-shkzg,
            xblnr   LIKE bsid-xblnr,                            "WD041005a
            sgtxt   LIKE bsid-sgtxt,
            dmbtr   LIKE bsid-dmbtr,
          END OF t.
    DATA : t1 LIKE STANDARD TABLE OF t WITH HEADER LINE.
    *LOOP AT t WHERE zuonr EQ space.
      MOVE-CORRESPONDING t TO t1.
      APPEND t1.
    ENDLOOP.*
    How can I write the loop statement to mention  the KUNNR
    Please help, thank you!!

    Hi,
    Try this.
    data : wa_t like line of table t.
    field-symbols : <f_t> like line of table t.
    sort t by kunnr.
    Loop at t where zuonr eq space.
    read table t1 with key kunnr = t-kunnr.
    if sy-subrc = 0.
    continue.
    endif.
    read table t into wa_t with key kunnr = t-kunnr.
    if sy-subrc = 0.
    loop at t assigning <f_t> from sy-tabix..
    if <f_t>-kunnr = wa_t-kunnr.
    move-corresponding <f_t> to t1.
    append t1.
    else.
    exit.
    endif.
    endloop.
    endif.
    endloop.
    Regards,
    Mohaiyuddin

  • Table space need to be increased in every week..

    Dear Experts,
    We are facing a new problem .
    The problem is like , Last 6 months back we had done the Hard-ware migration. After
    migration we need to increase the table space in every 10 days.   But before migration , the table
    space was getting ing increased in every 45 days.
    In this way , we dont have much space left with us..
    I am not able to analyse the issue ...
    Please suggest .. What to check and necessary action ...
    Thanks,
    Sanjana

    Hi,
    Thank you for the response. Yes , the hord-ware migration is not linked with this issue. But this is happening after migration . So I was thinking , if any setting might have changed or something like that .
    Deleting all the redundant data in system means , it should run regaularly. And Now new developments have gone to production.
    And the data loads are carrying almost same amount of data. Only 2 changes, Material Master was coming on DELTA , Now its Coming on FULL Load.  Rest all loads are same as before migration.
    Kindly suggest.
    Thanks,
    Sanjana

  • How to Access Table Space Map in Oracle 10g OEM

    How and from where to Access Table Space Map in Oracle 10g OEM ??
    Thanks

    Hi,
    first of all, the online help system of grid control is outstanding. Just click on Help in the upper right corner and enter "Tablespace Extent Map" in the search form.
    Result:
    Show Tablespace Contents Page
    Each Oracle database is divided into one or more logical units called tablespaces. You can use Oracle Enterprise Manager to manage these tablespaces and create or modify the parameters for the tablespaces. Use the Tablespace property sheet to set general and storage information for the specified tablespace.
    Use the Show Tablespace Contents page to display the list of tablespace segments that comprise the existing tablespace. You can display Tablespace Extents by choosing Show Tablespace Extent Map at the bottom of the page. An extent is a logical unit of database storage space allocation made up of a number of contiguous data blocks. One or more extents in turn make up a segment. When the existing space in a segment is completely used, Oracle allocates a new extent for the segment.
    You can view segment extents by clicking on the link in the Extents column to display the Extents in Segments page.
    You can display the Show Tablespace Contents page by choosing Show Tablespace Contents from the command drop down list on the Tablespace property page, the Tablespace View page, or the Tablespace search results page.
    Note: Developers could only display the tablespace map to a maximum hard coded number of 30,000 extents. Tablespaces are often larger than that. If a tablespace is larger than 30,000 extents, the portion over that is displayed as Unmapped. To avoid exceeding the memory capacity of the tablespace map and to display the map without unmapped extents, use a search criteria displaying results of less than 30K extents.
    For an overview of tablespaces, see the "Overview of Tablespaces " chapter of the Oracle Database Concepts Guide.
    For more information about managing tablespaces, see the " Managing Tablespaces" chapter of the Oracle Database Administrators Guide.
    For more information about managing datafiles, see the " Managing Datafiles and Tempfiles" chapter of the Oracle Database Administrator's Guide.

  • How to verify reused table space in oracle 10g ?

    Hi..
    From my system, i have seen that the table size keep increasing event the delete query is running. Due to that, I would to check either the oracle allowed to reuse the table space or not ? if not then how could i enable it ?
    Please help me..
    Thank you,
    Baharin

    You can use dbms_space.space_usage to check the for free space.
    Space reuse will depend on whether you are using MSSM or ASSM, PCT_FREE, PCT_USED, and how new data is inserted ?
    You can shrink or move the table and rebuild indexes to reclaim space.

Maybe you are looking for

  • FF doesn't open a pop up log in all of a sudden. No error message either.

    Since yesterday, FF 15.0.1 won't let me log into one of my sites, as the '''pop up log in''' will not open. It works for SeaMonkey after giving script permissions, and it works in Opera, but on FF the page has all permissions from NoScript and it sti

  • It takes forever to open files or insert files in Pages.

    When I try to open a file (or open from the recent file drop down), or insert a file, in pages I get the spinning beachball for 30 seconds before I can do anything. This started before I installed Lion, but it's worse with Lion.  Help!!!

  • Missing data when exporting to "MS Word (*.doc)" and "RTF (*.rtf)"

    Hello, We are using CR XI R2 SP3 in our product.  The reports that we generate (using ODBC dsn) show URLs from the database as hyper link text fields.  When we export the report to "Microsoft Word (.doc)" or "Rich Text Format (.rtf)" format, even tho

  • What does this error indicate, error=2?

    Hello. I've got a web app working on one computer (dev), but when I move it over to the server for external consumption, it gives me this error, Compilation of 'D:\webapps\mydomain\myserver\.wlnotdelete\_appsdir_Test_war_Test_4413816\js p_servlet\__t

  • Parse/read complex data types in WSDLs

    i need to read the WSDL and identify the Ports, Operation, Bindings and types. My intention is to compare 2 WSDLS and also to create a UI client for web Service based on the WSDLs. My issue here is the WSDL contains Complex Data Type,i couldnt find c