SCCM 2012 R2 CU3 - Drivers Not Installing, Local Administrator Account Disabled

After PXE OSD for a Thick Image of Win 7 x64 Ent completes, several Task Sequence steps are not complete. Namely, 3 device drivers are missing (NIC, SM Bus and some other chipset driver), the built-in Administrator Account is disabled and it's not Domain
joined.
I have already re-created the thick WIM twice. It was built in a VMware VM then captured with SCCM Capture Media. The NIC is a Realtek and I have downloaded the most recent version of the drivers from HP's site and added them to a driver package which is
deployed. I even added several older drivers to my Boot Image and created to 2 steps to add drivers in the Task Sequence - one automatically installs the best drivers, the other installs a package with 7 NIC drivers. When I get the error during PXE OSD, I
press F8 and the machine has an IP address and the driver for the NIC appears to be correct. Upon rebooting, Windows completes setup but the Administrator Account is not enabled and the NIC driver is missing, etc.
Here is the portion of the log where errors begin to show up (from D:\SMSTSLog). Any help is GREATLY appreciated!!
!--------------------------------------------------------------------------------------------!   TSManager   11/18/2014 1:06:57 PM   872 (0x0368) Expand a string: WinPE   TSManager
11/18/2014 1:06:58 PM   872 (0x0368) Executing command line: OSDApplyOS.exe /data:XXXXX0001A,%OSDDataImageIndex%   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Command line for extension
.exe is "%1" %*   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) Set command line: "OSDApplyOS.exe" /data:XXXXX0001A,1   ApplyOperatingSystem   11/18/2014
1:06:58 PM   1040 (0x0410) Searching for next available volume:   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) Volume C:\ has already used.   ApplyOperatingSystem
11/18/2014 1:06:58 PM   1040 (0x0410) Volume D:\ has already used.   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) Volume E:\ is not a XXXXX hard drive.
ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) Volume X:\ is not a XXXXX hard drive.   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) it
!= volumes.end(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installcommon.cpp,519)   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) There are no more volumes available
for use.   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) GetNextAvailableVolume(allowFAT, volume), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installcommon.cpp,651)
ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) The requested target could not be resolved to a valid volume on this computer. Check your task sequence to ensure this drive is correct and that it is being
created The parameter is incorrect. (Error: 80070057; Source: Windows)   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) ResolveTarget( g_Target, g_InstallType == InstallType_DataImage, targetVolume
), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\applyos\applyos.cpp,483)   ApplyOperatingSystem   11/18/2014 1:06:58 PM   1040 (0x0410) Process completed with exit code 2147500037
TSManager   11/18/2014 1:06:58 PM   872 (0x0368) !--------------------------------------------------------------------------------------------!   TSManager   11/18/2014 1:06:58 PM
872 (0x0368) Failed to run the action: Apply Data Image 1. Unspecified error (Error: 80004005; Source: Windows)   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) MP server http://XXXXSCCM12.XXXXX.XXXXX.
Ports 80,443. CRL=false.   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Setting authenticator   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Set authenticator
in transport   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Sending StatusMessage   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Setting message signatures.
TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Setting the authenticator.   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) CLibSMSMessageWinHttpTransport::Send: URL:
XXXXXSCCM12.XXXXX.XXXXX:80 CCM_POST /ccm_system/request   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Request was successful.   TSManager   11/18/2014 1:06:58 PM
872 (0x0368) Set a global environment variable _SMSTSLastActionRetCode=-2147467259   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Set a global environment variable _SMSTSLastActionSucceeded=false
TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Clear XXXXX default environment   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Let the parent group (Install Operating
System) decides whether to continue execution   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) The execution of the group (Install Operating System) has failed and the execution has been aborted. An action
failed. Operation aborted (Error: 80004004; Source: Windows)   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Failed to run the last action: Apply Data Image 1. Execution of task sequence failed. Unspecified
error (Error: 80004005; Source: Windows)   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) MP server http://XXXXXSCCM12.XXXXX.XXXXX. Ports 80,443. CRL=false.   TSManager   11/18/2014
1:06:58 PM   872 (0x0368) Setting authenticator   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Set authenticator in transport   TSManager   11/18/2014 1:06:58
PM   872 (0x0368) Sending StatusMessage   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Setting message signatures.   TSManager   11/18/2014 1:06:58 PM
872 (0x0368) Setting the authenticator.   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) CLibSMSMessageWinHttpTransport::Send: URL: XXXXXSCCM12.XXXXX.XXXXX:80 CCM_POST /ccm_system/request
TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Request was successful.   TSManager   11/18/2014 1:06:58 PM   872 (0x0368) Executing command line: X:\WINDOWS\system32\cmd.exe
/k   TSBootShell   11/18/2014 1:07:38 PM   764 (0x02FC) The command completed successfully.   TSBootShell   11/18/2014 1:07:38 PM   764 (0x02FC) Successfully launched
command shell.   TSBootShell   11/18/2014 1:07:38 PM   764 (0x02FC) Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,923)
TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Task Sequence Engine failed! Code: enExecutionFail   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) ****************************************************************************
TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Task sequence execution failed with error code 80004005   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Cleaning Up.
TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Removing Authenticator   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) shKey.DeleteValue( c_szRegValue_SecurityToken ),
HRESULT=80070002 (e:\nts_sccm_release\sms\framework\ccmutillib\ccmutillib.cpp,1660)   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Cleaning up task sequence folder   TSManager
11/18/2014 1:07:43 PM   872 (0x0368) Unable to delete file D:\_SMSTaskSequence\TSEnv.dat (0x80070005). Continuing.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) hr, HRESULT=80070091
(e:\nts_sccm_release\sms\framework\core\ccmcore\ccmfile.cpp,1218)   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Failed to delete directory 'D:\_SMSTaskSequence'   TSManager   11/18/2014
1:07:43 PM   872 (0x0368) (dwRet = ::SetNamedSecurityInfoW ((WCHAR*) pszObjectName, objectType, OWNER_SECURITY_INFORMATION, pOwnerSID, NULL, NULL, NULL)) == ERROR_SUCCESS, HRESULT=80070005 (e:\qfe\nts\sms\framework\tscore\utils.cpp,6675)
TSManager   11/18/2014 1:07:43 PM   872 (0x0368) SetNamedSecurityInfo() failed.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) SetObjectOwner() failed. 0x80070005.
TSManager   11/18/2014 1:07:43 PM   872 (0x0368) SetObjectOwner (szFName, SE_FILE_OBJECT, c_szAdministrators), HRESULT=80070005 (e:\qfe\nts\sms\framework\tscore\utils.cpp,6772)   TSManager   11/18/2014
1:07:43 PM   872 (0x0368) RemoveFile() failed for D:\_SMSTaskSequence\TSEnv.dat. 0x80070005.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) RemoveDirectoryW failed (0x80070091) for D:\_SMSTaskSequence
TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ...   TSManager   11/18/2014 1:07:43 PM   872
(0x0368) DeleteFileW(sVolumeIDFile.c_str()), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,508)   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Deleting volume ID file D:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca
...   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) DeleteFileW(sVolumeIDFile.c_str()), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,508)   TSManager   11/18/2014
1:07:43 PM   872 (0x0368) Successfully unregistered Task Sequencing Environment COM Interface.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Command line for extension .exe is "%1"
%*   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Set command line: "X:\sms\bin\x64\TsProgressUI.exe" /Unregister   TSManager   11/18/2014 1:07:43 PM
872 (0x0368) Executing command line: "X:\sms\bin\x64\TsProgressUI.exe" /Unregister   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) ==========[ TsProgressUI started in process 1980 ]==========
TsProgressUI   11/18/2014 1:07:43 PM   624 (0x0270) Command line: "X:\sms\bin\x64\TsProgressUI.exe" /Unregister   TsProgressUI   11/18/2014 1:07:43 PM   624 (0x0270)
Unregistering COM classes   TsProgressUI   11/18/2014 1:07:43 PM   624 (0x0270) Unregistering class objects   TsProgressUI   11/18/2014 1:07:43 PM   624 (0x0270)
Shutdown complete.   TsProgressUI   11/18/2014 1:07:43 PM   624 (0x0270) Process completed with exit code 0   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Successfully
unregistered TS Progress UI.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) g_TSManager.Run(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,766)   TSManager
11/18/2014 1:07:43 PM   872 (0x0368) ::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,811)   TSManager   11/18/2014 1:07:43
PM   872 (0x0368) RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) GetTsRegValue() is unsuccessful.
0x80070002.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) End program:    TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Error Task Sequence Manager failed
to execute task sequence. Code 0x80004005   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Sending error status message   TSManager   11/18/2014 1:07:43 PM   872
(0x0368) MP server http://XXXXXSCCM12.XXXXX.XXXXX. Ports 80,443. CRL=false.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Setting authenticator   TSManager   11/18/2014 1:07:43
PM   872 (0x0368) Set authenticator in transport   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Sending StatusMessage   TSManager   11/18/2014 1:07:43 PM
872 (0x0368) Setting message signatures.   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Setting the authenticator.   TSManager   11/18/2014 1:07:43 PM   872
(0x0368) CLibSMSMessageWinHttpTransport::Send: URL: XXXXXSCCM12.XXXXX.XXXXX:80 CCM_POST /ccm_system/request   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Request was successful.   TSManager
11/18/2014 1:07:43 PM   872 (0x0368) Finalize logging request ignored from process 804   TSManager   11/18/2014 1:07:43 PM   872 (0x0368) Process completed with exit code 2147500037
TSPxe   11/18/2014 1:07:43 PM   864 (0x0360) Task Sequence Manager returned code 0x80004005   TSPxe   11/18/2014 1:07:43 PM   864 (0x0360) ThreadToResolveAndExecuteTaskSequence
returned code 0x00000000   TSPxe   11/18/2014 1:07:43 PM   844 (0x034C) ResolveProgressPage::OnWizardNext()   TSPxe   11/18/2014 1:07:43 PM   844 (0x034C) Activating
Finish Page.   TSPxe   11/18/2014 1:07:43 PM   844 (0x034C) Exiting with return code 0x00000000   TSPxe   11/18/2014 1:07:43 PM   844 (0x034C) Execution complete.
TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,493)   TSBootShell   11/18/2014 1:07:43 PM
768 (0x0300) m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,335)   TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,553)
TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) ::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,811)   TSBootShell
11/18/2014 1:07:43 PM   768 (0x0300) RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram   TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) GetTsRegValue()
is unsuccessful. 0x80070002.   TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) End program:    TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) Finalizing
logging from process 760   TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) Finalizing logs to root of first available drive   TSBootShell   11/18/2014 1:07:43 PM
768 (0x0300) Successfully finalized logs to D:\SMSTSLog   TSBootShell   11/18/2014 1:07:43 PM   768 (0x0300) Cleaning up task sequencing logging configuration.   TSBootShell
11/18/2014 1:07:43 PM   768 (0x0300)

Thank you for the reply, you're right the problem is with an image being applied, but not the OS image.
The issue is that for some reason, there were 2 images captured and SCCM automatically created a step for both. Image 2-2 is the valid Windows image, but image 1-1 clearly has some issues. I disabled the that step in the Task Sequence and it installed drivers
and completed the rest of the Task Sequence!

Similar Messages

CCMSETUP not updating on SCCM 2012 SP1 CU3/CU4 primary site

I have a SCCM 2012 SP1 CU3 primary site and i can't upgrade the local installed SCCM Client.
The error I get in ccmsetup.log is:
<![LOG[MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002]LOG]!><time="15:44:22.408-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:300">
<![LOG[MSI: Action 15:44:22: Rollback. Rolling back action:]LOG]!><time="15:44:22.562-60" date="02-08-2014" component="ccmsetup" context="" type="0" thread="2496" file="msiutil.cpp:314">
<![LOG[File C:\windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action: CcmRegisterHostingConfiguration.
ErrorMessages:
Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002
]LOG]!><time="15:45:00.798-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:872">
<![LOG[Client installation has failed too many times. Ccmsetup will now abort.]LOG]!><time="15:45:00.830-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7941">
<![LOG[Successfully deleted the ccmsetup service]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2496" file="ccmsetup.cpp:3320">
<![LOG[InstallFromManifest failed 0x80070643]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7086">
<![LOG[CcmSetup failed with error code 0x80070643]LOG]!><time="15:45:05.832-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2324" file="ccmsetup.cpp:10544">
I have this on my primary and secondary servers as well.
Is upgrading to R2 recommended and will that solve this issue ?
When googling to this issue i found that there is a solution for this: remove MP, upgrade Client, install MP.
But this is my primary and secondary and on secondary i am not allowed to remove the MP. It is hardcoded enabled.

Try the following steps to specify the hotfix when installing the client.
1. Open an elevated command prompt.
2. Run a command line similar to the following – if CU3 has already been installed, the MSP file below should be on the site server, in the
\\servername\SMS_SITE\Client\hotfix folder:
\ccmsetup.exe PATCH=\Configmgr2012ac-sp1-kb2882125-x64.msp
Juke Chou
TechNet Community Support

New SCCM 2012 client machines still getting SCCM 2012 SP1 client not the new SCCM 2012 SP1 CU3 client

Hi,
I've successfully (as far as I can tell) deployed SCCM 2012 SP1 CU3 and all my existing clients are showing a client version of 5.00.7804.1400. But when I setup a new client system recently I noticed that the client version was showing 5.00.7804.1000,
and not 5.00.7804.1400.
For new client systems, do I need to redeploy the packages that were created for SCCM 2012 SP1 CU3 so that the new systems get the new SCCM 2012 SP1 CU3 client?
Thanks,
Nick

Hi,
Here's some good information to look over:
http://sccmfaq.wordpress.com/2013/09/24/sccm-2012-include-cu-in-osd/
I haven't followed these instructions myself, since I haven't really had any good reason to include CUs during the initial installation process. I use this method instead and I've never run into any problems:
http://www.ronnipedersen.com/2013/06/installing-sccm-2012-sp1-cu2-quick-start-guide/
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

New-CMVhd error Not Found - SCCM 2012 R2 CU3

When trying to execute New-CMVhd via powershell in SCCM 2012 R2 CU3 I get a "Not Found" error.
This happens in our production and pre-production environments.
Using the Console wizard works fine.
Command is:
New-CMVhd -Path "\\machine\D$\Windows2012R2Server_SCCM.vhd" -Name "Windows2012R2Server_SCCM" -Version "1.0" -VHDSize 100 -TaskSequencePackageId "XXX00123" -DistributionPointServerNames "server.contso.com" -Description "Built with Deploy Server To VHD Task Sequence." -Verbose
Output:
VERBOSE: Performing the operation "New" on target "Vhd: New".
VERBOSE: Executing WQL query: Select * From SMS_TaskSequencePackageReference_All where PackageID='XXX00123'
VERBOSE: Query options: None
VERBOSE: Executing WQL query: Select * From SMS_DistributionPointInfo where Name='server.contoso.com'
VERBOSE: Query options: None
VERBOSE: Query 'Select * From SMS_DistributionPointInfo where Name='server.contoso.com'' processed 1
results.
VERBOSE: Executing WQL query: SELECT Distinct tspr.RefPackageID FROM SMS_TaskSequencePackageReference_All AS tspr WHERE
tspr.PackageID='XXX00123' and tspr.RefPackageID Not In (SELECT PackageID FROM SMS_Package AS p WHERE
p.PkgSourceFlag=1)
VERBOSE: Query options: None
New-CMVhd : Not found
At line:1 char:1
+ New-CMVhd -Path \\machine\D$\Windows2012R2Server_SCCM.vhd -Name "Windows201 ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Microsoft.Confi...s.NewVhdCommand:NewVhdCommand) [New-CMVhd], WqlQueryExc
eption
+ FullyQualifiedErrorId : UnhandledExeception,Microsoft.ConfigurationManagement.Cmdlets.Osd.Commands.NewVhdCommand
Can anyone else reproduce this? I have a feeling it will be a premier support call to Microsoft :-(
Thanks

Hi,
Pls try to run the following command to import CM powershell module and change the path to be the CM server before your new-cmvhd command:
import-module 'C:\Program Files (x86)\Microsoft Configuration Manager\AdminConsole\bin\ConfigurationManager.psd1'
Set-Location CMserver:\
“Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.”

Office 2013 Professional Plus - 32 bit Deployment takes an unacceptable time to deploy in SCCM 2012 - SP1 CU3

We recently migrated over to SCCM 2012 SP1 - CU3 the first of the year from SCCM 2007 SP2. We have used SCCM in the past to deploy Office 2010 and had deployed Office 2013 to our IT Dept. before moving over to SCCM 2012. The deployment went as
expected. Now that we are ready to start deploying Office 2013 to our corporate workstations, the deployment time is running 4.5 hours to 5.5 hours from the local site server DP. I am afraid to find out what time we are looking at for remote DP's.
The three factors that are different is that our SCCM site server is virtual, it is running 2012 for the OS, and obviously SCCM 2012-SP1 - CU3. We are using the same package source files. Previous to a successful deployment we were
seeing hash mismatch errors which MS support pointed us to the nic driver on the VM was using E1000E and to change it to a VMX something driver.
So I guess my question is anyone else out there deploying Office 2013 ProPlus - 32 bit from this type of environment? Our previous deployment time for office was a little over an hour (not five hours). Any suggestions where to look to improve
the deployment time?
I am expected to deploy this in one week and have been working on these issues for weeks.

I see now that you are using a combination of scripts and ConfigMgr package/program.
The AppEnforce.log file is for use with the new ConfigMgr Application model.
Is there any reason that you don't use the new model for deploying Office 2013? It's a single step process and perfect for it. If you use the Office Customisation Tool you can customise what you like. The process will then uninstall Office 2010 and install
Office 2013.
This is how you do it
http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_9368.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM 2012 R2 CU3 UPGRADE BROKE REMOTE ADMIN CONSOLE CONNECTIVITY

I installed SCCM 2012 R2 CU3 on my site server but it broke a couple things. I've never had problems with SCCM upgrades before. The admin console works if you log into the site server and run it from there but not when you try it from anywhere else (another
server or a workstation). When you open the admin console on the site server it does have the new version of 5.00.7958.1401. Of the five suggestions that appear when your console won't connect, here's what I know:
1) the remote machines can all ping the site server (call it server 01)
2) we know it's not my account that's a problem as I can open the console on the site server itself
3) This problem happens on server 02, which I put the new admin console on. It also happens with other machines which still have the CU2 console
4) Yes, I'm an admin role, shown by logging into the console on the site server
5) I have another network where everything works. I have not put CU3 on it yet, of course. The WMI permissions on Root, Root\SMS, and Root\SMS\site_ABC are identical on both site servers yet it works on non-upgraded one and not on the upgraded one.
WMI info-I can WMI connect from the site server to these other machines but not WMI connect from the other machines to the site server: not root, SMS, or SMS\site_ABC, nor cimv2, even though the permissions match what is on the working network.
When I launch the console from the site server entries about loading the console loading ok are in SMSAdminUI.log, but when I try to launch the console from other machines no entries are made, even though I changed the SmsAdminSNapIN value to VERBOSE.
I checked DCOM permissions and they are the same on both networks.
Another issue that appeared with this upgrade: I can install the client upgrade to CU3 on other machines but on the site server it fails with "Internal Error 2503" and when you click OK it you get "Internal Error 2502".
Ben JohnsonWY

I'd suspected this WMI problem was only affecting our Server 2012 boxes. I compared RSOPs and noticed the ones having this problem were all under the same OU and getting few GPOs. Our GPO person found a GPO that has somehow become unlinked. He relinked
it. After a gpo update AND a reboot these machines start working again. So CU3 did not cause this WMI after all.
And yes, the CU2 consoles won't connect to a CU3 site server, you have to run the console upgrade.
I fixed the "internal error 2503/2502" by doing this: open task manager, click details, end the explorer task (screen will look blank at first). Click File and select "start new task", enter "explorer.exe' and click the run as admin
button. The msp for CU3 client installed and the screen looks normal again. I only saw this error on the site server and have never seen it before.
Ben JohnsonWY

SCCM 2012 R2 CU3 PXE issue

Hi,
I have a SCCM 2012 R2 CU3 lab where pxe is not working, the clients are able to connect to SCCM server but the download gets stuck on the boot image & then it fails with the following error :-
Don't find any specific error related to this deployment in SMSPXE.log.
Thanks,
Pranay.

I've had some issues various places with NICs and the TFTP process. One fix I implemented was to add the following registry entry:
Location:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSTFTP
Name: MaximumBlockSize
Type: (REG_DWORD)
Value range: 512–1456
Base: (Decimal)
I set it to 1024, but you need to determine what value works for your environment.
This is documented here:
http://support.microsoft.com/kb/975710/en-us
Jeff

SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

Hello,
I am glad it worked.
Thank you for visiting MSDN forums!
Regards,
Alberto Morillo
SQLCoffee.com

PC suite - Cable drivers not installed???

After installing the PC suite VER 6.82.22.0, though PC recognizes N70 phone, the PC suite does not get connected. When clicked 'About PC suite' and 'system info', message cable drivers not installed is found. However, if checked in the control panel, the drivers are found installed. The earlier version did not have any problems. Can any body solve this.

try this:
/discussions/board/message?board.id=pcsuite&message.id=11480

HP 5610xi "drivers not installed"

Setup and printed from a HP 5610xi on a iBook G4 (10.3.9) using USB. Then tried to setup through Airport Express (USB printing enabled)-Rendezvous 'sees' the printer but "drivers not installed' message stops the process? 'Latest' HP drivers are installed

HP 'answered' my question - the 5610 AIO is not compatible with the Airport Express! Compatible list is at: http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&docname=c00035369

Computer says itunes drivers not installed?

computer doesnt recognize ipods. tried to update itunes and it shut my computer down and blew out all my ports. had computer repaired, seems that update worked but cant plug in ipods to sync music and the box comes up saying the itunes drivers not installed. how do i install them? im a little hesitant to download itunes again after what happened last time, so just wanted some advice.

No, you will not lose your library. The actual installation and where your files are stored are in separate locations. When you uninstall, you are only uninstalling the program, and therefore, your library will not be affected.
Only thing to note is if you changed the location of your itunes library, you will have to tell itunes where you keep your library, so itunes can load it from there.

SCCM 2012 Software Metering is not working

SCCM 2012 Software Metering is not working in our environment. Other than software metering, reports work just fine.
I have created a few simple software metering rules with “Acrobat.exe” and “Outlook.exe”. Rules are enabled. Rules were on at least 6 months.
When I go to software metering reports, Month parameter value is empty and I can’t choose any value.
I ran runmetersumm.exe on our server, it did not work as intended. :
Summarizing data up to 0 hours old.
File Usage Summary added -1 rows in 0 seconds.
Monthly Usage Summary added -1 rows in 0 seconds.
I am stumped. Why would it add minus rows?
Any ideas how I can make software metering work on our environment?
Thank you

Finally figured it out.
mtrmgr.log did not find any rules when I ran executables. So I knew it wasn't working on the server side.
After searching for a while, I found the solution from the link below:
http://social.technet.microsoft.com/Forums/en-US/8f048512-c357-437e-89ec-cee5356a10b1/software-metering-reports-empty?forum=configmanagergeneral
1. Deleted RULECHG.RTA under policypv.box folder
2. Removed and recreated metering rules again.
Everything is working again now.
Thank you.
I do wonder how to avoid those problems going forward though.

SCCM 2012 Sp1 CU3 support Windows 2012 R2 deployment?

Hi,
Sorry for so basic question, but I have read few docuemnts, blogs and official materials and I'm a bit confused.
In our organization we have SCCM Sp1 CU3. We are planning create and next deploy Windows 2012R2 Server images. On some documentations there is CU3 supports only application managment, inventory and so on. but there is nothing about image deployment.
So, my question is - I have to upgrade SCCM 2012 Sp1 CU3 to SCCM2012R2 to capture, build and deploy Windows 2012R2 system?
Thank you.

Yes, you do. See what's new with ConfigMgr 2012 R2
http://technet.microsoft.com/en-us/library/dn236351.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM 2012 software update point not sync with Microsoft Updat,

Hi
Recently my SCCM 2012 software update is not syncing with microsoft update, am getting below error. can any one suggest/help me how to resolve this issue.
WebException: The remote server returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetAuthConfig()
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.InternetGetServerAuthConfig(ServerSyncProxy proxy, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.Authenticate(AuthorizationManager authorizationManager, Boolean checkExpiration, ServerSyncProxy proxy, Cookie cookie, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesFromUSS()
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)

am just trying to tracert catalog.update.microsoft.com
from my wsus server but it is failed, would that be the reason/
Regards,
Madhan

I have two accounts on my pc, ad on gets installed on other(limited acces account) but not on main administrator account in mozilla ?? help me out please....

i have two accounts on my pc, add on gets installed on other(limited access account) but not on main administrator account in mozilla ?? help me out please..

I have Norton Internet Security, but that doesn't seem to have stopped it. And it's goofy. It won't let me lock it by clicking its lock. The lock keeps magically coming unlocked.
Also, my computer crashes more than once a week on average.
Those two facts are related.
Norton Antivirus has a very long and illustrious reputation for mangling Mac OS X systems, sometimes to the point where a complete reinstall is necessary. Among other things, it installs kernel extensions which are known to cause kernel panics and system freezes; it contains known and documented bugs which can silently corrupt Adobe Photoshop and Adobe InDesign files, destroy a user's ability to authenticate as an administrator, and (on PPC systems) can cause Classic to stop functioning; and Symantec has on at least two occasions now released flawed .dat file updates which erroneously report certain critical Mac OS X files as "viruses." (Deleting these "viruses" causes damage to the system that in some cases renders it unbootable.)
You may find my User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Privacy, useful:
http://discussions.apple.com/thread.jspa?threadID=1764179&tstart=0
Regarding MacScan, First update the MacScan malware definitions before scanning. You can also contact their support team for any additional support - [email protected]
Security of OS X generally:
http://www.apple.com/macosx/security/
http://www.nsa.gov/ia/_files/os/applemac/I731-007R-2007.pdf
Security Configuration for Version 10.5 Leopard:
http://images.apple.com/server/macosx/docs/LeopardSecurity_Config_2ndEd.pdf

SCCM 2012 R2 CU3 - Drivers Not Installing, Local Administrator Account Disabled

Similar Messages

Maybe you are looking for