SCCM 2012 R2 Installation with Remote SQL Instance
I am trying to install SCCM 2012 R2 and during the install it asks for your SQL Server Name. I have a remote SQL Server which I can ping all day but the installation is telling me "The network path was not found". I turned the firewall
off on the SQL Server and the install proceeded to the next step so that told me it was a firewall issue.
On my SQL Server I opened the following ports but still the install doesn't get through until I completely disable the firewall.
TCP and UDP 1434
TCP and UDP 1433
80
443
TCP and UDP 135
TCP and UDP 2383
TCP and UDP 2382
TCP and UDP 4022
I know this is a little excessive but its ports I've seen suggestions for to open but I'm out of ideas. I even tried suggestions from earlier posts by Jason Sandy's to setspn and I've verified it is correct with setspn -L but still nothing. Any
suggestions on what ports are needed during install? As mentioned, firewall off it works great but as soon as firewall is turned on (even with ports open above) I get no where.
Be kind and Mark as Answer if I helped.
Thanks for everyone' reply's. It is using the default instance (i'm leaving the field blank as it specifies). I have checked SQL Server Manager and ensured that under TCP/IP and the IP Address's tab that all the IP1, IP2, IP3, IPALL has nothing
(not even a 0) in TCP Dynamic Ports and the TCP port is specified as 1433 for all those. I even made ODBC connections that "tested successfully" to the remote sql server. I'm just confused.
I tried netstat and didn't get any viable results but maybe i'm missing a switch. With firewall on or off during installation it was making established connections to ports 49320, 49321, 49322, 49323, 49254, 49278, 49302, 49220, 49223, 49224,
49259, 49262, 49263, 49295, 49304, 49332, 49154 and so on. Obviously I don't think these are relevant and just normal chatter between the two servers. Its on a VM so i snapshotted the SQL and CM box before the install so I'm able to revert back
(or even reload both boxes if necessary). I'm going to try a few more things but any more suggestions are more than welcome.
Be kind and Mark as Answer if I helped.
Similar Messages
-
SCCM 2012 package installation with reboot supress
Hi,
In our customer environment we manage workstations with SCCM 2012 for patching and software deployments. However, I want to do SCCM pacakge deployment with reboot suppress and notification option as like how we do it for Patch deployment. Can some
one help me how to achieve this.
Regards,
MadhanHi,
Just saw that the question is for SCCM 2012, it is not the correct forum, however.
Reboot supression after applications installations i controled by the exit code the installation command returns. If it returns for instance exit code 3010 = soft reboot then the sccm client will initiate a reboot accourding to the reboot
client settings. If you cannot control the exit code, running the script through a wrapper, like a vbscript, powersehll or commandline that returns error code 0 instead is a workaround often used as well.
If you want to initiate a reboot you can do that under "after running" there you can configure that sccm should restart the client.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Problem with NW04s SR2 installation with MS SQL Server 2000 SP4
Im struggling with the NW04s installation with MS SQL Server 2000.
The installation stops at the step Create/modify database schema SAPJ2EDB.
The following error/info from log file,
INFO 2007-06-06 12:02:33 [iaxxgenimp.cpp:632]
showDialog()
Execute step doConfiguration of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|NW_MSS_SRVCFG|ind|ind|ind|ind|6|0.
INFO 2007-06-06 12:02:35 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempdb of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
showDialog()
Execute step doSwitch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempDBAnalyze of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:37 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempDBBeforeRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:38 [iaxxgenimp.cpp:632]
showDialog()
Execute step doRestartServer of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:58 [ianxbservi.cpp:697]
CIaNtServices::stop(const map<iastring,iastring>&)
The service 'MSSQLSERVER' stopped successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:10 [ianxbservi.cpp:632]
CIaNtServices::start(const map<iastring,iastring>&)
The service 'MSSQLSERVER' started successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:21 [ianxbservi.cpp:632]
CIaNtServices::start(const map<iastring,iastring>&)
The service 'SQLSERVERAGENT' started successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:21 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempDBAfterRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:03:22 [iaxxgenimp.cpp:632]
showDialog()
Execute step doChangeTempSetNewSize of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
showDialog()
Execute step CheckParameters of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
INFO 2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
showDialog()
Execute step CreateDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
INFO 2007-06-06 12:03:40 [iaxxgenimp.cpp:632]
showDialog()
Execute step CreateDatabase of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
ERROR 2007-06-06 12:03:40 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
ERROR 2007-06-06 12:03:40
lib=iamodmssql module=CIaNtMssDmo
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.
INFO 2007-06-06 12:04:04 [iaxxgenimp.cpp:774]
showDialog()
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase".
ERROR 2007-06-06 12:04:05 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
Please let me know if you can help or if there is any other way around.
Many Thanks in advance.
Ritin JainHi All,
I was not able to solve the problem with MS SQL 2000, but I was able to resolve the issue with MS SQL 2005.
You have to chhose the following settings while instalation,
Service Account - Select one of the following options:
1) Use the built-in System account for each service and choose Local system or Network Service.
2) Use a domain user account, and enter the user name and password.
Under Start services at the end of setup make sure that SQL Server and SQL Server Agent are selected.
Authentication Mode
1) Select Mixed Mode (Windows Authentication and SQL Server Authentication).
This mode is required for a Java or ABAP+Java system.
If you choose this mode, you have to set the password for the sa login.
Note: The password for the sa login must comply with the Windows password policy.
Collation Settings
1) Select SQL collations (used for compatibility with previous versions of SQL Server).
2) From the drop-down list select Binary order based on code point comparison, for use with the 850 (Multilingual) Character Set.
I hope this helps! -
SCCM 2012 Client Installation Errors & Solutions
Hello,
Can we figure out all SCCM 2012 Client installation errors and solutions ?
Cheer's Up
Best Regard's KrishnaHi,
Error codes are easiest looked up in CMtrace, making one general list of errors and solutions is hard, in many scenarios there are different solutions to an error based on the infrastructure and differences between environments
Error lookup in cmtrace.
http://blogs.technet.com/b/configmgrdogs/archive/2012/06/07/trace32-exe-cmtrace-exe-hidden-features.aspx
Here is a blog on troubleshooting client installations issues, it is for sccm 2007 but a lot of the content is still valid.
http://blogs.technet.com/b/sudheesn/archive/2010/05/31/troubleshooting-sccm-part-i-client-push-installation.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Can we recover SCCM 2012 R2 site Servers and SQL DB from hyper V or Vmware VM snapshot
Hi Folks
Can we recover SCCM 2012 R2 site Servers and SQL DB from hyper V or Vmware VM snapshot
if yes is there any challenges or any document available from Microsoft on Hyper V SCCM VM snapshot recovery.I've made it work and it "should" work. However it's not the best practice method of site recovery. You should recover using a SQL restore.
See good example
http://anoopcnair.com/2012/07/01/sccm-configmgr-2012-primary-site-server-and-database-recovery-part-1/
Note that you should be using snapshots only on occasions when you are carrying out a risky operation. You can revert it the operation fails. It is not a substitute for a robust backup solution.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
in sccm 2012 dp installation , where to define drives
Hi Torsen
i am facing one issue while removing DP role from site server as it was taking default drives i wanted
to customised them so i tried reinstalling but it is still taking same drive not the drives i have given at the time of installation. I have given now E and D drive but still its taking c drive which was previous installtion drive. -
Problems install SCCM 2012 with remote sql 2008 r2 sp2
I am having issues installing sccm 2012 on a remote sql 2008 r2 sp2 server on a seperate instance.
I get the error "The network path was not found"
if i point it at the primary instance it will let me continue but i cannot install sccm into that instance.
I have turned off dynamic ports and set a static port but I do not see where i can enter that in the installer.
I cannot seem to verify is the ssb port is working correctly or not.
my account is local admin on both servers and a sql sysadm.
There is no firewall between servers.
Any suggestions?
Regards
DonSPN is setup to AUTO register and is working. remote sql is not a cluster. Windows firewall on both servers is disabled. Sql browser is enabled and started. we have a group for system center that contains site servers and this group
is in the local admin of both servers and sysadm inside of sql server.
Why we are consolidating all or our lesser sql servers into a larger one.
Snipt of the log.
12/12/2012 2:57:37 PM: ConfigMgrSetupWizard Error: 1 : Exception message: [The network path was not found.
], Exception details: [System.IO.IOException: The network path was not found.
Server stack trace:
at Microsoft.Win32.RegistryKey.Win32ErrorStatic(Int32 errorCode, String str)
at Microsoft.Win32.RegistryKey.OpenRemoteBaseKey(RegistryHive hKey, String machineName)
at Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.GetSqlConnection(String databaseName, String serverName, Boolean encrypt)
at Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.CheckSqlConnection(String serverName, String instanceName)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
at Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
at Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
at Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
at System.Windows.Controls.Button.OnClick()
at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
at System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
12/12/2012 3:01:42 PM: ConfigMgrSetupWizard Information: 1 : Creating SQL connection to database ADMIN\master on server YSQL030.srf.local.
12/12/2012 3:01:42 PM: ConfigMgrSetupWizard Error: 1 : Exception message: [The network path was not found.
], Exception details: [System.IO.IOException: The network path was not found. -
Why SCCM 20012 Install fails with remote 64 bit SQL Server but proceeds for remote 32 bit SQL Server
I have the following setup:
AD User accounts
- SQLAdmin (used to run SQL Services i.e. Database Engine)
- SCCMADmin (used to install SCCM 2012)
SPN registered for user account SQLAdmin
setspn -S MSSQLSvc/SQL.Domain_Name:1432 Domain_Naem\SQLAdmin
setspn -S MSSQLSvc/SQL:1432 Domain_Name\SQLAdmin
setspn -S MSSQLSvc/SQL.Domain_Name:1433 Domain_Naem\SQLAdmin
setspn -S MSSQLSvc/SQL:1433 Domain_Name\SQLAdmin
and checked with setspn -L TESTING\SQLAdmin
1 SERVER called SQL
32bit Server with SQL Server 2008 + SP3 + Cumulative Update 6
2 SQL instances - Default (MSSQLSERVER) and
SCCM2012
MSSQLSERVER instance uses TCP port 1433
SCCM2012 Instance users TCP port 1432 (no dynamic ports)
User accounts that have been given public and sysadmin SQL server roles
on both instances are: SQLAdmin, SCCMAdmin, Domain Administrator, Local Administrator and computer account SCCM
Client Protocols TCP enabled (and Named Pipes) (checked via SQL Server Configuration Manager)
Local Administrators Group on this server has members - SQLAdmin, SCCMAdmin, Domain Administrator, Local Administrator and computer account SCCM
Firewall turned on with access allowed on Ports 1432, 1433, 4022,445, and WMI - WMI-in, DCOM-in and ASync-iN builtin rules allowed\enabled.
1 SERVER called SQL3
64bit Server with SQL Server 2008 + SP3 + Cumulative Update 6
2 SQL instances - Default (MSSQLSERVER) and
SCCM2012
MSSQLSERVER instance uses TCP port 1433
SCCM2012 Instance users TCP port 1432 (no dymanic ports)
User accounts that have been given public and sysafmin SQL server roles on both instances are:
SQLAdmin, SCCMAdmin, Domain Administrator, Local Administrator and computer account SCCM
Client Protocols TCP enabled (and Named Pipes) (checked via SQL Server Configuration Manager)
Local Administrators Group on this server has members - SQLAdmin, SCCMAdmin, Domain Administrator, Local Administrator and computer account SCCM
Firewall turned off
1 SERVER called SCCM
64bit Server that is to be the Primary Site Server\MP for SCCM 2012
ODBC link to SQL\SCCM2012,1432
ODBC link to SQL3\SCCM2012,1432
ODBC uses SQL Native Client 10.0 (64 bit)
Both ODBC connections when TESTed pass and suggest connectivity to SQL Servers
Install process doe SCCM2012
Tried to install SCCM 2012 RC2 when logged in to SCCM Server as AD user account
SCCMAdmin, and when utilising the SCCM2012 SQL instance on
32 bit server of SQL install proceeds barring warning about 8GB rec, for SQL Server. Then fails on PKI certificate issue. Installation (chose HTTP for MP). I beleive the PKI failure as install starts is
due to the fact that SCCM 2012 needs its database server to b 64 bit ?
Thus i then tried to install SCCM 2012 RC2 when logged in to SCCM Server as AD user account SCCMAdmin, and
when using the SCCM2012 SQL instance on
64 bit server of SQL install proceeds but fails at checking stage and says:
SQL Server sysadmin rights FAILED SQL3.Domain_Name
Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions. Setup
cannot continue.
and
Site System to SQL Server communication WARNING SCCM.Domain_Name
A communication error has been detected between the specified site system and the site database computer. This error can occur when the site database server is offline or if a valid SPN has not been registered in Active Directory Domain Services for the SQL
Server instance hosting the site database. Setup cannot continue.
Why does the install of SCCM 2012 with 32 bit SQL proceed further than the install with 64 bit SQL, with the latter process failing as above error meesages show and yet both servers are set identically (apart from temporary turning off Firewall on the 64
bit server) and during the install the Databse Server specified is accepted ?Thanks for the reply.
I can connect via ODBC to the the 32 bit SQL Server and the 64 bit SQL Server from the SCCM Server
The SQL Server Unit called SQL3 unit is a 64 bit SQL.
The SQL Server Unit called SQL is only 32 bit, but at least gets past the final checking stage and the error messages about sysadmin rights and Site System to SQL Server communication problem, and then fails with PKI certificate error message.
When trying to install SCCM specifying the 64 bit SQL Server as the Database Server it gives the 2 error messages at the final checking stage of the installation as listed.
So as I said what is confusing is the fact that if the SCCM install uses the remote 32 bit SQL Server it passes the final checking (although fails with PKI certificate message) but the 64 bit SQL Server set up exactly the same apart from the Firewall being
left off for the time being, fails at the final check stage with the 2 listed errors.
If I use a local 64 bit SQL Server the installation is fine.
Still would like to find out what cause the 2 issues for the remote 64 bit SQL Server, when ODBC seems fine, sysadmin rights have been given for the installer account and the SCCM computer account and SPNs have been set for the user account running the SQL
Services. -
hi all,
I am trying to install DPM 2012 beta on a hyper-v VM that has 4 GB of RAM and 4 Procs.
I am trying not to install SQL on the same VM, and instead use a SQL that we have on the network. it's running windows server 2008 R2 and server server 2008 R2 enterprise.
The setup seems to be going but then it erros at the end and gives this error message:
Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components copied during installation.
For details, click the Error tab.
on the error tab I see this message:
The DPM database was not created.
Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that it is running, and then run Setup again.
ID: 811
so I opened the setup log file and here's the last part which belongs to the last attept:
[1/18/2012 11:58:42 PM] Information : MsiInstallProduct returned 0.
[1/18/2012 11:58:42 PM] Information : End install.
[1/18/2012 11:58:42 PM] Information : **************************************************************************************
[1/18/2012 11:58:42 PM] Information : **************************************************************************************
[1/18/2012 11:58:42 PM] Information : Start configuration.
[1/18/2012 11:58:42 PM] Information : Starting Service:MSSQLSERVER on machine:rcnoraspsql flag restart:False
[1/18/2012 11:58:42 PM] Information : Starting Service:SQLSERVERAGENT on machine:rcnoraspsql flag restart:False
[1/18/2012 11:59:42 PM] Data : dbScriptsPath = C:\Program Files\Microsoft DPM\DPM\Setup\DB
[1/18/2012 11:59:42 PM] Data : sqlcmdPath = "C:\Program Files\Microsoft DPM\SQL\100\Tools\Binn\SQLCMD.EXE"
[1/18/2012 11:59:42 PM] Data : instanceName = rcnoraspsql
[1/18/2012 11:59:42 PM] Information : Deleting schedules
[1/18/2012 11:59:42 PM] * Exception : => System.Data.SqlClient.SqlException: The specified @category_name ('DPM_814c0e35-a52b-471a-9b20-da87a9a94fab') does not exist.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.InternalExecuteReader()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteReader()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.DeleteSchedules(Boolean needImpersonation, String categoryName)
[1/18/2012 11:59:42 PM] Information : Creating database
[1/18/2012 11:59:45 PM] Information : Executing query to create database
[1/18/2012 11:59:45 PM] Data : Database creation query = CREATE DATABASE DPMDB_DPM2012
ON
NAME=MSDPMV4Beta$DPMDB_DPM2012_dat,
FILENAME='C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\MSDPMV4Beta$DPMDB_DPM2012.mdf',
SIZE=400MB
LOG ON
NAME=MSDPMV4Beta$DPMDB_DPM2012Log_dat,
FILENAME='C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\MSDPMV4Beta$DPMDB_DPM2012_log.ldf',
SIZE=500MB
[1/18/2012 11:59:45 PM] Information : Creating the required roles
[1/18/2012 11:59:45 PM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the role 'MSDPMExecRole', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.CreateRole(SqlContext ctx, String roleName)
[1/18/2012 11:59:45 PM] Information : MSDPMExec role created
[1/18/2012 11:59:45 PM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the role 'MSDPMReaderRole', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.CreateRole(SqlContext ctx, String roleName)
[1/18/2012 11:59:45 PM] Information : MSDPMReader role created
[1/18/2012 11:59:45 PM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the role 'MSDPMRecoveryRole', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.CreateRole(SqlContext ctx, String roleName)
[1/18/2012 11:59:45 PM] Information : MSDPMRecovery role created
[1/18/2012 11:59:45 PM] Information : Changing temp table names
[1/18/2012 11:59:45 PM] Information : Creating tables
[1/18/2012 11:59:45 PM] Information : Execute the SQL script
[1/18/2012 11:59:45 PM] Data : FileName = "C:\Program Files\Microsoft DPM\SQL\100\Tools\Binn\SQLCMD.EXE"
[1/18/2012 11:59:45 PM] Data : Arguments = -b -E -d DPMDB_DPM2012 -i master.sql -r -S rcnoraspsql
[1/19/2012 12:01:22 AM] Data : Error code = 0
[1/19/2012 12:01:23 AM] Data : dbScriptsPath = C:\Program Files\Microsoft DPM\DPM\Setup\DB
[1/19/2012 12:01:23 AM] Data : sqlcmdPath = "C:\Program Files\Microsoft DPM\SQL\100\Tools\Binn\SQLCMD.EXE"
[1/19/2012 12:01:23 AM] Data : instanceName = rcnoraspsql
[1/19/2012 12:01:23 AM] Information : Populate database with error strings
[1/19/2012 12:01:23 AM] Information : Register verbs
[1/19/2012 12:01:28 AM] Information : Set purchased agent licenses entry
[1/19/2012 12:01:29 AM] Information : Set the InventoryHouseKeepingJobStartTime entry to 01/19/2012 09:00:00
[1/19/2012 12:01:29 AM] Information : Set the value of libraryInventory needed to True
[1/19/2012 12:01:29 AM] Information : Set the value of IsPruningNeeded in the DB
[1/19/2012 12:01:29 AM] Information : **************************************************************************************
[1/19/2012 12:01:29 AM] Information : Start configuration.
[1/19/2012 12:01:29 AM] Information : Starting Service:MSSQLSERVER on machine:rcnoraspsql flag restart:False
[1/19/2012 12:01:29 AM] Information : Starting Service:SQLSERVERAGENT on machine:rcnoraspsql flag restart:False
[1/19/2012 12:01:29 AM] Information : Starting Service:ReportServer on machine:rcnoraspsql flag restart:False
[1/19/2012 12:01:29 AM] Information : Create a registry containing sql agent account information
[1/19/2012 12:01:29 AM] Information : Querying WMI Namespace:
\\rcnoraspsql\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='SQLSERVERAGENT'
[1/19/2012 12:01:30 AM] Information : Sql Agent account name = appvtrial.com\SQLAdmin
[1/19/2012 12:01:30 AM] Information : Create a registry containing the trigger job path information
[1/19/2012 12:01:30 AM] Data : TriggerJobPath = C:\Program Files\Microsoft Data Protection Manager\DPM2012\SQLPrep
[1/19/2012 12:01:30 AM] Information : Add user: appvtrial.com\SQLAdmin to local group: Distributed COM Users on server: DPM2012
[1/19/2012 12:01:30 AM] Information : Give user: appvtrial.com\SQLAdmin read and execute permissions on file: C:\Program Files\Microsoft DPM\DPM\bin\msdpm.exe
[1/19/2012 12:01:30 AM] Information : Creating group DPMDBAdministrators on remote SQL Server machine rcnoraspsql
[1/19/2012 12:01:30 AM] Information : Adding local group DPMDBAdministrators$DPM2012 on server rcnoraspsql
[1/19/2012 12:01:30 AM] Information : Deleting local group DPMDBAdministrators$DPM2012 on server rcnoraspsql
[1/19/2012 12:01:30 AM] * Exception : Ignoring the following exception intentionally => An error occurred while trying to configure DPM.Uninstall DPM by using Add or Remove Programs in Control Panel, and then run DPM Setup again.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException:
Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException' was thrown.
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.SecurityConfigurationHandler.DeleteLocalGroup(String serverName, String localGroupName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.SecurityConfigurationHandler.AddLocalGroup(String serverName, String localGroupName)
*** Mojito error was: DpmSetupConfigurationError; 2220; WindowsAPI
[1/19/2012 12:01:30 AM] Information : Add user: APPVTRIAL\sqladmin to local group: DPMDBAdministrators$DPM2012 on server: rcnoraspsql
[1/19/2012 12:01:30 AM] Information : Adding local group MSDPMTrustedUsers on server DPM2012
[1/19/2012 12:01:30 AM] Information : Deleting local group MSDPMTrustedUsers on server DPM2012
[1/19/2012 12:01:30 AM] * Exception : Ignoring the following exception intentionally => An error occurred while trying to configure DPM.Uninstall DPM by using Add or Remove Programs in Control Panel, and then run DPM Setup again.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException:
Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException' was thrown.
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.SecurityConfigurationHandler.DeleteLocalGroup(String serverName, String localGroupName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.SecurityConfigurationHandler.AddLocalGroup(String serverName, String localGroupName)
*** Mojito error was: DpmSetupConfigurationError; 2220; WindowsAPI
[1/19/2012 12:01:30 AM] Information : Adding local group DPMSCOM on server DPM2012
[1/19/2012 12:01:30 AM] Information : Deleting local group DPMSCOM on server DPM2012
[1/19/2012 12:01:30 AM] * Exception : Ignoring the following exception intentionally => An error occurred while trying to configure DPM.Uninstall DPM by using Add or Remove Programs in Control Panel, and then run DPM Setup again.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException:
Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException' was thrown.
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.SecurityConfigurationHandler.DeleteLocalGroup(String serverName, String localGroupName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.SecurityConfigurationHandler.AddLocalGroup(String serverName, String localGroupName)
*** Mojito error was: DpmSetupConfigurationError; 2220; WindowsAPI
[1/19/2012 12:01:30 AM] Information : Adding local group DPMDBReaders$DPM2012 on server rcnoraspsql
[1/19/2012 12:01:30 AM] Information : Deleting local group DPMDBReaders$DPM2012 on server rcnoraspsql
[1/19/2012 12:01:30 AM] * Exception : Ignoring the following exception intentionally => An error occurred while trying to configure DPM.Uninstall DPM by using Add or Remove Programs in Control Panel, and then run DPM Setup again.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException:
Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException' was thrown.
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.SecurityConfigurationHandler.DeleteLocalGroup(String serverName, String localGroupName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.SecurityConfigurationHandler.AddLocalGroup(String serverName, String localGroupName)
*** Mojito error was: DpmSetupConfigurationError; 2220; WindowsAPI
[1/19/2012 12:01:30 AM] Data : dbScriptsPath = C:\Program Files\Microsoft DPM\DPM\Setup\DB
[1/19/2012 12:01:30 AM] Data : sqlcmdPath = "C:\Program Files\Microsoft DPM\SQL\100\Tools\Binn\SQLCMD.EXE"
[1/19/2012 12:01:30 AM] Data : instanceName = rcnoraspsql
[1/19/2012 12:01:30 AM] Information : Grant permissions on database
[1/19/2012 12:01:30 AM] Data : Database connection string = Integrated Security=SSPI;server=rcnoraspsql;Pooling=false;database=DPMDB_DPM2012;Pooling=false
[1/19/2012 12:01:30 AM] Data : Account name = rcnoraspsql\DPMDBReaders$DPM2012
[1/19/2012 12:01:30 AM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the login 'rcnoraspsql\DPMDBReaders$DPM2012', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.RevokeSqlLogin(SqlContext ctx, String loginName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.CreateSqlLoginAndGrantDBAccess(SqlContext sqlContext, String loginName, String nameInDatabase)
[1/19/2012 12:01:31 AM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the user 'rcnoraspsql\DPMDBReaders$DPM2012', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.RevokeDatabaseAccess(SqlContext ctx, String nameInDatabase)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.GrantDatabaseAccess(SqlContext ctx, String loginName, String nameInDatabase)
[1/19/2012 12:01:31 AM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the user 'DPMDBReaders$DPM2012', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.RevokeDatabaseAccess(SqlContext ctx, String nameInDatabase)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.GrantDatabaseAccess(SqlContext ctx, String loginName, String nameInDatabase)
[1/19/2012 12:01:31 AM] Data : Account name = APPVTRIAL\DPM2012$
[1/19/2012 12:01:31 AM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the login 'APPVTRIAL\DPM2012$', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.RevokeSqlLogin(SqlContext ctx, String loginName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.CreateSqlLoginAndGrantDBAccess(SqlContext sqlContext, String loginName, String nameInDatabase)
[1/19/2012 12:01:31 AM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the user 'APPVTRIAL\DPM2012$', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.RevokeDatabaseAccess(SqlContext ctx, String nameInDatabase)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.GrantDatabaseAccess(SqlContext ctx, String loginName, String nameInDatabase)
[1/19/2012 12:01:31 AM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the user 'APPVTRIAL\DPM2012$', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.RevokeDatabaseAccess(SqlContext ctx, String nameInDatabase)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.GrantDatabaseAccess(SqlContext ctx, String loginName, String nameInDatabase)
[1/19/2012 12:01:31 AM] Data : Account name = rcnoraspsql\DPMDBAdministrators$DPM2012
[1/19/2012 12:01:31 AM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the login 'rcnoraspsql\DPMDBAdministrators$DPM2012', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.RevokeSqlLogin(SqlContext ctx, String loginName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.CreateSqlLoginAndGrantDBAccess(SqlContext sqlContext, String loginName, String nameInDatabase)
[1/19/2012 12:01:31 AM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the user 'rcnoraspsql\DPMDBAdministrators$DPM2012', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.RevokeDatabaseAccess(SqlContext ctx, String nameInDatabase)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.GrantDatabaseAccess(SqlContext ctx, String loginName, String nameInDatabase)
[1/19/2012 12:01:31 AM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the user 'DPMDBAdministrators$DPM2012', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.RevokeDatabaseAccess(SqlContext ctx, String nameInDatabase)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.GrantDatabaseAccess(SqlContext ctx, String loginName, String nameInDatabase)
[1/19/2012 12:01:31 AM] Data : Database connection string = Integrated Security=SSPI;server=rcnoraspsql;Pooling=false;database=master;Pooling=false
[1/19/2012 12:01:31 AM] Data : Account name = APPVTRIAL\DPM2012$
[1/19/2012 12:01:32 AM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the user 'APPVTRIAL\DPM2012$', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.RevokeDatabaseAccess(SqlContext ctx, String nameInDatabase)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.GrantDatabaseAccess(SqlContext ctx, String loginName, String nameInDatabase)
[1/19/2012 12:01:32 AM] Information : Configuration.DBConfigurator: Setting Read_Committed_SnapShot ON
[1/19/2012 12:01:32 AM] Information : Creating tables
[1/19/2012 12:01:32 AM] Information : Execute the SQL script
[1/19/2012 12:01:32 AM] Data : FileName = "C:\Program Files\Microsoft DPM\SQL\100\Tools\Binn\SQLCMD.EXE"
[1/19/2012 12:01:32 AM] Data : Arguments = -b -E -d DPMDB_DPM2012 -i MiniSetupDBConfiguration.sql -r -S rcnoraspsql
[1/19/2012 12:01:32 AM] Data : Error code = 0
[1/19/2012 12:01:32 AM] Information : Adding DPM Server entry in tbl_AM_Server table
[1/19/2012 12:01:32 AM] Information : Preloading Microsoft.Internal.EnterpriseStorage.Dls.AgentManager.DB.InstalledAgents
[1/19/2012 12:01:32 AM] Information : Preloading Microsoft.Internal.EnterpriseStorage.Dls.EngineUICommon.DpmThreadPool
[1/19/2012 12:01:33 AM] Data : Database connection string = Integrated Security=SSPI;server=rcnoraspsql;Pooling=false;database=DPMDB_DPM2012;Pooling=false
[1/19/2012 12:01:33 AM] Information : Grant execute permissions on dbo.prc_MOM_ProductionServer_Get to DPMDBReaders$DPM2012
[1/19/2012 12:01:33 AM] Information : Grant execute permissions on dbo.prc_MOM_HeartBeat_Get to DPMDBReaders$DPM2012
[1/19/2012 12:01:33 AM] Information : Configuration.DBConfigurator: Registering DPM category
[1/19/2012 12:01:33 AM] Information : Configuration.DBConfigurator: Adding DPM Category to GlobalSettings table
[1/19/2012 12:01:33 AM] Information : Add job definitions
[1/19/2012 12:01:43 AM] Information : Creating schedules
[1/19/2012 12:02:20 AM] * Exception : => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception
from HRESULT: 0x800706BE)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CProxyUtils.HandleErrors(Int32 hr, tagSAFEARRAY* exceptionResult)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.SchedulerServicesProxy.Register(String scheduleXml)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
[1/19/2012 12:02:20 AM] * Exception : => The DPM database was not created.Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that
it is running, and then run Setup again.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.DatabaseConfigurationException: exception ---> System.Reflection.TargetInvocationException:
Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception from HRESULT: 0x800706BE)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CProxyUtils.HandleErrors(Int32 hr, tagSAFEARRAY* exceptionResult)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.SchedulerServicesProxy.Register(String scheduleXml)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterSchedule(String scheduleXmlFile)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.PopulateDefaultScheduleDefinitionsInDatabase(DBConfigurationReader dbCfgReader)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.AddJobAndScheduleDefinitions()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.MiniSetupConfiguration.PopulateDB(Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.MachineSpecificConfiguration(Boolean existingDB, Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
*** Mojito error was: DatabaseCreateFailed; 0; None
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.MachineSpecificConfiguration(Boolean existingDB, Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.Configure(Boolean existingDB, Boolean upgrading, String databaseLocation, String sqlServerMachineName, String instanceName, Boolean oemSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.Configure()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallDpm()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: DatabaseCreateFailed; 0; None
[1/19/2012 12:02:20 AM] *** Error : The DPM database was not created.
Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that it is running, and then run Setup again.
ID: 811
[1/19/2012 12:02:20 AM] Information : Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components
copied during installation.
For details, click the Error tab.
=====================
any ideas as to how to make this work are much appreciated.
Thanks
MJ
Mohsen AlmassudI just redone everything to make sure that I didn't miss anything and I am still getting the same result.
here's what I got:
====================
Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components copied during installation.
For details, click the Error tab.
====================
[1/19/2012 8:03:35 AM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the user 'rcnoraspsql\DPMDBAdministrators$DPM2012', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.RevokeDatabaseAccess(SqlContext ctx, String nameInDatabase)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.GrantDatabaseAccess(SqlContext ctx, String loginName, String nameInDatabase)
[1/19/2012 8:03:35 AM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the user 'DPMDBAdministrators$DPM2012', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.RevokeDatabaseAccess(SqlContext ctx, String nameInDatabase)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.GrantDatabaseAccess(SqlContext ctx, String loginName, String nameInDatabase)
[1/19/2012 8:03:35 AM] Data : Database connection string = Integrated Security=SSPI;server=rcnoraspsql;Pooling=false;database=master;Pooling=false
[1/19/2012 8:03:35 AM] Data : Account name = APPVTRIAL\DPM2012$
[1/19/2012 8:03:35 AM] * Exception : Ignoring the following exception intentionally => System.Data.SqlClient.SqlException: Cannot drop the user 'APPVTRIAL\DPM2012$', because it does not exist or you do not have permission.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.RevokeDatabaseAccess(SqlContext ctx, String nameInDatabase)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Helpers.SetupDatabaseHelper.GrantDatabaseAccess(SqlContext ctx, String loginName, String nameInDatabase)
[1/19/2012 8:03:35 AM] Information : Configuration.DBConfigurator: Setting Read_Committed_SnapShot ON
[1/19/2012 8:03:35 AM] Information : Creating tables
[1/19/2012 8:03:35 AM] Information : Execute the SQL script
[1/19/2012 8:03:35 AM] Data : FileName = "C:\Program Files\Microsoft DPM\SQL\100\Tools\Binn\SQLCMD.EXE"
[1/19/2012 8:03:35 AM] Data : Arguments = -b -E -d DPMDB_DPM2012 -i MiniSetupDBConfiguration.sql -r -S rcnoraspsql
[1/19/2012 8:03:36 AM] Data : Error code = 0
[1/19/2012 8:03:36 AM] Information : Adding DPM Server entry in tbl_AM_Server table
[1/19/2012 8:03:36 AM] Information : Preloading Microsoft.Internal.EnterpriseStorage.Dls.AgentManager.DB.InstalledAgents
[1/19/2012 8:03:36 AM] Information : Preloading Microsoft.Internal.EnterpriseStorage.Dls.EngineUICommon.DpmThreadPool
[1/19/2012 8:03:36 AM] Data : Database connection string = Integrated Security=SSPI;server=rcnoraspsql;Pooling=false;database=DPMDB_DPM2012;Pooling=false
[1/19/2012 8:03:36 AM] Information : Grant execute permissions on dbo.prc_MOM_ProductionServer_Get to DPMDBReaders$DPM2012
[1/19/2012 8:03:36 AM] Information : Grant execute permissions on dbo.prc_MOM_HeartBeat_Get to DPMDBReaders$DPM2012
[1/19/2012 8:03:36 AM] Information : Configuration.DBConfigurator: Registering DPM category
[1/19/2012 8:03:37 AM] Information : Configuration.DBConfigurator: Adding DPM Category to GlobalSettings table
[1/19/2012 8:03:37 AM] Information : Add job definitions
[1/19/2012 8:03:46 AM] Information : Creating schedules
[1/19/2012 8:04:10 AM] * Exception : => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception
from HRESULT: 0x800706BE)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CProxyUtils.HandleErrors(Int32 hr, tagSAFEARRAY* exceptionResult)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.SchedulerServicesProxy.Register(String scheduleXml)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
[1/19/2012 8:04:10 AM] * Exception : => The DPM database was not created.Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that
it is running, and then run Setup again.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.DatabaseConfigurationException: exception ---> System.Reflection.TargetInvocationException:
Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception from HRESULT: 0x800706BE)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CProxyUtils.HandleErrors(Int32 hr, tagSAFEARRAY* exceptionResult)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.SchedulerServicesProxy.Register(String scheduleXml)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterSchedule(String scheduleXmlFile)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.PopulateDefaultScheduleDefinitionsInDatabase(DBConfigurationReader dbCfgReader)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.AddJobAndScheduleDefinitions()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.MiniSetupConfiguration.PopulateDB(Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.MachineSpecificConfiguration(Boolean existingDB, Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
*** Mojito error was: DatabaseCreateFailed; 0; None
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.MachineSpecificConfiguration(Boolean existingDB, Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.Configure(Boolean existingDB, Boolean upgrading, String databaseLocation, String sqlServerMachineName, String instanceName, Boolean oemSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.Configure()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallDpm()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: DatabaseCreateFailed; 0; None
[1/19/2012 8:04:10 AM] *** Error : The DPM database was not created.
Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that it is running, and then run Setup again.
ID: 811
[1/19/2012 8:04:10 AM] Information : Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components
copied during installation.
For details, click the Error tab.
=====================
Mohsen Almassud -
Can DPM share a remote SQL Instance with other System Centre Products?
Firstly, apologies if this has been answered elsewhere but I can't seem to find a definitive line on it.
I am about to install and start implementing DPM 2012 R2 and have restricted access to SQL instances and the creation of. Can DPM share a SQL instance? Mainly can it share an instance shared with other System Centre products?
Does it really need a dedicated DB engine and Reporting services instance?Hi,
No, Each DPM server requires it's own dedicated instance name. You can have a single remote SQL server, but with seperate instances for each DPM server, or other System Center products.
Make sure that names of your instances does not contains an underscore in the instance name.
http://technet.microsoft.com/en-us/library/dn554221.aspx
Hope this helps.
Note: This posting is provided 'AS IS' with no warranties or guarantees, and confers no rights. Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable. This helps the community, keeps the forums tidy, and
recognises useful contributions. -
SCCM 2012 SP1 is Running on SQL Server 2012 with NO CU
I am working in an org that has SCCM 2012 SP1, it is and always has been running on SQL Server 2012 RTM, with NO CU installed it seems (judging by the file versions 11.0.2100.60, which are not the same as as documented here http://support.microsoft.com/kb/2703275).
sigh..........
So before I upgrade to R2 I will ensure I installed SP2 and CU3 onto SQL Server.
However, I am concerned about WHY SCCM 2012 SP1 requires SQL Server 2012 CU2 as a minimum and what damage may have been done as a result of this configuration?
Are there any actions that can be performed as remediation or health check?
Can anyone speculate?However, I am concerned about WHY SCCM 2012 SP1 requires SQL Server 2012 CU2 as a minimum
Because the Microsoft product group decided it that way. All supported SQL versions are listed here:
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigSQLDBconfig
Damage? Hard (impossible) to tell. You would have seen errors in various components if there were problems.
Torsten Meringer | http://www.mssccmfaq.de -
I need to upgrade the silverlight version that is deployed with the SCCM 2012 client installation
We have SCCM 2012 SP1 installed and I need to upgrade the version of silverlight that get installed on the client deployement.
The version that is automaticly deployed is 5.1.10411.0 and this one is not compatible with Firefox. When you click on Application Catalog it start the browser but it fails to load because of the silverlight plug-in that is not up to date. The
version that is working fine is the 5.1.20913.0 and it's already installed on my SCCM site server.
So that is why I'm looking to upgrade the silverlight that is installed with the SCCM client.
I know that a simple workarround would be to create a package that would be deployed after the client gets installed, but why not changing the original package at the source instead of installing twice the same software the get the right version!
Is there someone that could point me where I could upgrade this Silverlight prerequirement software version ?Note that I have not tested either of these and they will not be supported by Microsoft.
1. Copy your new version of Silverlight.exe to C:\Program Files\Microsoft Configuration Manager\Client\i386
(you'll have to re-distribute the client package after this).
OR
2. You could edit the ccmsetup.xml file with an alternative location for silverlight.exe
</Item>
<Item FileName="i386/Silverlight.exe" FileHash="417B442E128D821119008ACEEEE6CDC2A41224377A829B6EC52BABA2724F0151">
<Applicability Platform="ALL" OS="ALL">
<Skip>Embedded</Skip>
</Applicability>
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
SCCM 2012 Multiple Domains with a single SCCM instance
Hello:
Can SCCM 2012 be deployed to multiple untrusted domains within a single install?
I work for a company that maintains multiple client networks all Windows Domain and non are trusted / or are even aware of the other sites.
I would like to setup a SCCM 2012 (and also a Virtual Machine Manager for HyperV) at my office and manage all my different client sites from the single SCCM server.
The connection would be from my office over the Internet in through their on prem firewall
Currently we use Centra Stage and have used Kaseya in the past. I am looking to move from them and focus on SCCM to do this for me.
Is this even possible to do with the product?
Thanks in Advance!
-DavidYes, ConfigMgr can manage (un)trusted forests, but what exactly do you mean with "not aware of the other sites"? A requirement is that name resolution and a connection is possible.
For some good scenario's see also this series:
http://blogs.technet.com/b/neilp/archive/2012/08/20/cross-forest-support-in-system-center-2012-configuration-manager-part-1.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
SCCM 2012 - Install WSUS Off Box SQL
Hi all,
installed SCCM 2012 R2 CAS on a 2012 server. The SQL is off box on a server cluster. I've installed WSUS through the 'Add Roles and Features'. I configured it to have local storage for the content and a remote DB instance
(called SQL1 on our cluster). All this worked well and the install completed as expected. I checked the SQL cluster and the "SUSDB" database was created ok.
As a final step, i went to Tools in Server Manager and launched Windows Server Update Services. This brought up the 'Complete WSUS Installation' dialogue box. I entered the exact same DB info as i had done when completing
the initial install of WSUS:
Yet when i hit 'run' the following message returns:
The relevant bit of logging is shown here:
2015-01-14 16:58:42 Starting service W3SVC
2015-01-14 16:58:42 Configuring IIS...
2015-01-14 16:58:42 Start: ConfigureWebsite
2015-01-14 16:58:42 System.Runtime.InteropServices.COMException (0x80070422): The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
So i guess i have two question;
1] is this Post-installation failure something i need to fix? (I presume it is)
2] If i do need to fix this to get sccm running properly, does anyone have any suggestions as to where i should start?
Thanks(for three forests which have no trust relationships).
That's not a valid technical reason to have multiple primary sites at all. ConfigMgr does not care about, use, or rely on domain or forest boundaries or client membership in any way for client management. Using multiple primary sites and a CAS will
significantly increase complexity and latency, will add additional points of failure, and will increase overall operational costs.
Concur with Jason here. CAS not needed. You can add in untrusted forests to the Configmgr Console so log as you have an account with permissions in the destination forest, extend the schema, create the system management container and open up any firewall
ports that are need for communication from site server to dc.
Neil Peterson has a great set of blogs on how to achieve this
http://blogs.technet.com/b/neilp/archive/2012/08/20/cross-forest-support-in-system-center-2012-configuration-manager-part-1.aspx
and ports are listed in this TechNet article under site server -- > Domain Controller. Ensure your RPC ports match the OS of the DC.
http://technet.microsoft.com/en-gb/library/hh427328.aspx
Final agreement with Jason - push to get that SQL local.
Cheers
Paul | sccmentor.wordpress.com -
Data Services 4.0 installation with MS SQL 2008
hey guys,
I am trying to install data services 4.0 on a windows server with MS SQL database as the repository database. So, my plan was to install MS SQL 2008 first, then IPS, then data services. But i am facing a problem in installation of MS SQL itself. I installed MS SQL with following features - database engine, client tools and management tools. The installation process was smooth and the sql server services (server and agent) both startup just fine. I installed a custom instance for the same.
But problem is when I open the management studio and try to connect to the database engine, it does not connect, I choose database engine as the server type, local hostname as the server name and windows authentication as the authentican type but it fails with the following error:
TITLE: Connect to Server
Cannot connect to <myservername>.
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
For help, click: http://go.microsoft.com/fwlink?ProdName=MicrosoftSQLServer&EvtSrc=MSSQLServer&EvtID=53&LinkId=20476
BUTTONS:
OK
Any clues as to what is causing this ??? Or is it normal at this stage of installation ?? I am confused. I have already tried to reinstall the server, no good, nothing in the event logs either.
Thanks,
RSresolved via following:
In the TCP/IP Properties dialog box, on the IP Addresses tab, several IP addresses appear in the format IP1, IP2, up to IPAll. One of these is for the IP address of the loopback adapter, 127.0.0.1. Additional IP addresses appear for each IP Address on the computer. Right-click each address, and then click Properties to identify the IP address that you want to configure.
If the TCP Dynamic Ports dialog box contains 0, indicating the Database Engine is listening on dynamic ports, delete the 0.u201D
Once I deleted those zeros and put in 1433 for TCP ports on each IP address, voila!
Maybe you are looking for
-
Can A synonym be used in Discover?
I am new to this tool and I have a schema with all objects that I need to develop my discover application, however, all these objects will have to be move to a different schema. I gave select,update, delete grant to the schema that I am going to use
-
Report Painter/Report Writer Error
Hi Gurus, When I try to create a library in report writer with a custom Special Ledger line item table ZZFCCA, I get the error "Table ZZFCCA is not installed in Report Writer. Message no. GR493 Diagnosis: The Report Writer can only report on tables i
-
Multiple channel AI measurement in the same module with synchronised AO
I am using NI -9172 for measurment. I am trying to mesure two AI voltage signals on the same module (NI9215).A sinosoidal analog input voltage is generated using NI 9263. The AI and AO are synchronised using Ai start trigger signal from NI 9263(
-
How to export in smaller widescreen format than p720?
How can I set presets in PE7 such, that the exported video has the same hight/widh as the original? I am shooting with KodakZi8 WVGA modus, which is 16:9 but smaller than 720p. In PE7 I only found the option to set to "widescreen" in 720p. In manual
-
TCO (Total cost of ownership) of LaserJet printers
Dear friends, can somebody to help us with comparison of TCO at HP Laser Jet printers ? I´am looking for something similar like THIS Excel file from competition (OKI), sorry this very interesting file is in czech only, I can´t find out it in english.