SCCM 2012 Reporting Services Website

Can someone point me to a how-to for configuring the Reporting Services website? The URL for our 2007 server is http://<server name>/SMSReporting_<site code>, but I can't figure out how to access the reporting website for SCCM 2012.

By default http://servername/reports
Justin Chalfant | http://patchmypc.net | Please remember to mark as helpful/answer if this helped you

Similar Messages

SCCM 2012 - Reporting Services - No Reports show up in Console!

Hi,
I’m in the process of building our new 2012 SCCM infrastructure and have hit a small issue. When installing the Reporting services Point it appears to run through ok however no reports are populated.
So far I’ve checked the:
srsrpMSI.log - No Errors
srsrpsetup.log - No Errors
However in the srsrp.log Im getting the following:
Successfully checked that the SRS web service is healthy on server SCCMPRISERVER.LOCAL
But on a periodic basis:
Confirmed the configuration of SRS role [ConfigMgr Report Users]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Confirmed the configuration of SRS role [ConfigMgr Report Administrators]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Confirmed the security policy for folder [/]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Confirmed the security policy for folder [/ConfigMgr_GBL]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
System.Web.Services.Protocols.SoapException: The path of the item 'Asset Intelligence' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash. --->
Microsoft.ReportingServices.Diagnostics.Utilities.InvalidItemPathException: The path of the item 'Asset Intelligence' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path
must start with slash.~ at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetPolicies(String Item, Policy[]& Policies, Boolean& InheritParent)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetPolicies(String Item, Policy[]&
Policies, Boolean& InheritParent) SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Failed to retrieve existing folder security for folder [Asset Intelligence]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
System.Web.Services.Protocols.SoapException: The path of the item 'Compliance and Settings Management' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with
slash. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidItemPathException: The path of the item 'Compliance and Settings Management' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report
server is in native mode, the path must start with slash.~ at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetPolicies(String Item, Policy[]& Policies, Boolean& InheritParent)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetPolicies(String
Item, Policy[]& Policies, Boolean& InheritParent) SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
Failed to retrieve existing folder security for folder [Compliance and Settings Management]. SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
System.Web.Services.Protocols.SoapException: The path of the item 'Administrative Security' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash.
---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidItemPathException: The path of the item 'Administrative Security' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native
mode, the path must start with slash.~ at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetPolicies(String Item, Policy[]& Policies, Boolean& InheritParent)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetPolicies(String
Item, Policy[]& Policies, Boolean& InheritParent) SMS_SRS_REPORTING_POINT 26/07/2012 10:16:18 4272 (0x10B0)
The above is repeated for all the standard reports you would expect to find..
The Primary site is windows 2008 R2(Fully Patched), SQL 2008 R2 Standard Sp1, with CU6 installed.
I’ve confirmed security accounts etc. I’ve also tried uninstalling/reinstalling SSRS and re-applying sP1 and CU6.
Any suggestions?
Thanks,
Pete

Hi, The thing is my domain account has local admin rights on the box and is set as a "Full Administrator" on all nodes in the console? Ive just tried right clicking on the console 'Run As Administrator', tried to install Reporting services but im still getting
the same problem.
One thing I have noticed is that If i manually create the report directories it runs through ok and sets the permissions. However no reports are populated. I have alos tried manually importing one of the report.rdl files and this fails:
When it comes back with 'Failed to retrieve existing folder security for folder [Network Access Protection]' what actual folder security is it supposed to be checking? Is this in the actual DB?
Thanks, Pete

Sccm 2012 reporting services server instance blank

Hi guys,
Can anyone provide me tips to install reporting service point on SCCM 2012 server.
P.S: SRS instance configured in SQL server 2008 R2 SP2 and it can accessible (http://<SQLserver>/Reports/) in SCCM 2012 server
Please help me!
Thanks,

If you don't have DNS entry for your Report Service Point (SQL server), the instance field can be blank too.
Can you expand on this as I have never heard of this issue before.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 - Reporting Services - No srsrpsetup.log file

Hi all,
just in the process of moving from SCCM 2007 to 2012 R2. Here's the set up: SCCM installed on Win 2012 R2 box, SQL back end is off box on a Win 2012 R2 cluster, SQL Reporting Services is installed on a dedicated Win 2012 R2 box.
I've installed the Reporting Services Point onto the SRS01 box (which also installed the Site system and Component server roles). The role seems to have instlled ok - it's popped up under the Component Status as Healthy and the State Messages look ok:
I was under the impression that I should then see a new log file (SRSRPSetup.log) appear in the install directory (D:\Program Files\Microsoft Configuration Manager\Logs) but so far nothing's appeared. Since the log files are usually the best to start
troubleshooting I'm a bit stumped as to where to begin troubleshooting this. Does anyone have any suggestions as to why the log file may not have appeared?
Thanks for the help!

Ignore this, just had a poke around on the SRS server and found the log files under D:\SMS\logs. Should have realised sine the role was installed on the SRS01 server, that's naturally where the role installation logs would be located!

SCCM 2012 Reporting Service Point

Hi,
I have configured the SSRS on my Primary site server where my SQL also resides on the same server. I could not get the Reports from the console. While looking in to the srsrp.log, found the following
Reporting Services is running SMS_SRS_REPORTING_POINT
4/21/2015 2:21:35 AM 508 (0x01FC)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 4/21/2015 2:21:35 AM
508 (0x01FC)
Confirmed version [11.0.3000.0] for the Sql Srs Instance.
SMS_SRS_REPORTING_POINT 4/21/2015 2:21:35 AM
508 (0x01FC)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 4/21/2015 2:21:35 AM
508 (0x01FC)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at R_P01
SMS_SRS_REPORTING_POINT 4/21/2015 2:21:35 AM
508 (0x01FC)
Cleared the 'DataSourceNeedsUpdated' flag SMS_SRS_REPORTING_POINT
4/21/2015 2:21:35 AM 508 (0x01FC)
(!) Error retrieving folders - [A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The target principal name is incorrect.)].
SMS_SRS_REPORTING_POINT 4/21/2015 2:21:35 AM
508 (0x01FC)
No folder configuration information found. SMS_SRS_REPORTING_POINT
4/21/2015 2:21:35 AM 508 (0x01FC)
Not sure how we can track the target principal name.
Any help is much appreciated.
Regards,
Vinod

Was this server renamed after SQL was installed?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 report w/ selectable collection

I am trying to create a report with a selectable collection parameter. The original query I'm using is as follows (Stolen from
http://blogs.technet.com/b/infratalks/archive/2013/09/10/sccm-2012-reporting-get-system-serial-number-amp-create-custom-ssrs-report.aspx):
Select sys.Name0 Machine, CS.UserName0 'User Name',OS.Caption0 OS, OS.CSDVersion0 'Service Pack',CS.Manufacturer0 Manufacturer,CS.Model0 Model,BIOS.SerialNumber0 'Serial Number',RAM.Capacity0 Memory, cs.SystemType0
From v_R_System SYS
left join v_GS_COMPUTER_SYSTEM CS on sys.Name0=cs.Name0
left join v_GS_PC_BIOS BIOS on sys.ResourceID=bios.ResourceID
left join v_GS_OPERATING_SYSTEM OS on sys.ResourceID=OS.ResourceID
left join v_GS_PHYSICAL_MEMORY RAM on sys.ResourceID=ram.ResourceID
--Where sys.Name0 = @variable
order by sys.Name0
This works fine, but it gives me that information for EVERY machine in our infrastructure globally. I am only interested in getting this information from machines in certain collections and I want to be able to select the collection each time I run
the report. I found this article:
http://it.peikkoluola.net/2013/06/02/report-with-a-selectable-collection-parameter-sql/ and followed the steps, but cannot run the report successfully. I'm guessing it has something to do with needing to modify my query, but I am a newb with SQL and
have no clue what or where I should be tweaking. Just adding "WHERE(dbo.v_FullCollectionMembership.CollectionID
= @COLLID)" gives me a syntax error. Moving it above "Order by sys.name0" gives an error about not being bound to anything, which makes sense but as I mentioned, I don't know what to tweak. Help! Thanks.

Select sys.Name0 Machine, CS.UserName0 'User Name',OS.Caption0 OS, OS.CSDVersion0 'Service Pack',CS.Manufacturer0 Manufacturer,CS.Model0 Model,BIOS.SerialNumber0 'Serial Number',RAM.Capacity0 Memory, cs.SystemType0
From v_R_System SYS
left join v_GS_COMPUTER_SYSTEM CS on sys.Name0=cs.Name0
left join v_GS_PC_BIOS BIOS on sys.ResourceID=bios.ResourceID
left join v_GS_OPERATING_SYSTEM OS on sys.ResourceID=OS.ResourceID
left join v_GS_PHYSICAL_MEMORY RAM on sys.ResourceID=ram.ResourceID
join v_fullcollectionmembership fcm on fcm.resourceid=sys.resourceid
Where fcm.collectionid = @COLLID
order by sys.Name0
Try the above, note that @COLLID is a placeholder for a variable. It is presumed that you are creating this using Report Builder 3.0 (or better) or some other SQL tool to create reports for use on your SRS reporting point. If you happen
to be using Report Builder, once you save the above, under parameters you'd have a place for COLLID. Now, what you want is to be able to have that parameter be populated with your collection names, so that you can select from the list when the report
is run.
So... another DataSet, with a query like:
select collectionid, name
from v_collection
order by name
Then, back to your parameters, COLLID, available values, Get values from a query, and you'll want to use that dataset you just made, and Value field is collectionid, and Label field is Name.
If you want to test the top query in regular sql, don't use @collID. figure out the collectionid of a specific collection, and put in where fcm.collectionid='ABC00012'
Standardize. Simplify. Automate.

SCCM 2012 Report Problem

hi there,
we are using sccm 2012 with reports functionality on SQL 2008 R2 since 2 weeks now and everything is working fine, including reports.
most of the time i monitor the reports for "Status for a specified task sequence deployment on a specific computer"
but since yesterday i noticed that i cannot see any data here anymore - all task sequence deployments (which are working fine without errors) are not shown here anymore. not only i cannot see the current deployments of computers, i am also not able to see
data for deployments we had 2 weeks ago.
there is no error; sccm 2012 reports are just showing me no data (just for 1,2 computers instead of 20 or 30).
i rebooted sccm 2012 and also took a look at the component status; no error related to reporting system and reporting service is running.
anyone has a clue?

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SQL Server 2012 Reporting services Report Builder ClickOnce in SharePoint integrated mode

Hi
I've installed SSRS 2012 in Integrated Mode with SharePoint 2013.
I've created RS Application, I have the Content types for Report Builder Report but when I try to create a new Report Builder Report from a document library (using ribbon) it try to lauch the following url
http://sp2013/bi/_layouts/15/ReportServer/RSAction.aspx?RSAction=ReportBuilder&FileUrl=http://sp2013/_layouts/15/ReportServer/rs.rsapplication&SaveLocation=http%3A%2F%2Fsp2013%2Fbi%2FDocuments&Source=http%3A%2F%2Fsp2013%2Fbi%2FDocuments%2FForms%2FAllItems%2Easpx
which gives an 404 Not found error
I've installed Report Builder 3.0 as standalone because from SQL installation I didn't get an Report Builder
What else should I do ?
I've noticed that ReportBuilder_3.....application is in webservices folder of sharepoint
Please help
Sorin Sandu

Hi Sorin,
SQL Server 2012 Reporting Services (SSRS) includes stand-alone and ClickOnce versions of Report Builder. The ClickOnce version can be used with Reporting Services installed in native or SharePoint integrated mode. For more information about how to start
Report Builder, please see:
http://msdn.microsoft.com/en-us/library/ms159221(v=sql.110).aspx
Reference:
SharePoint 2010 – SQL 2012 Reporting Services
SharePoint 2010 - SQL 2012 Reporting Services Part 2
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

SQL 2012 Reporting Services hang

Hello,
we are using SQL 2012 Reporting Services with Dynamics CRM Reports. Since a few wekkes every other day it looks like my Reproitng services do fail. CRM Reports do not work and If I try to browse https://sql2012.mobilex.intra/Reports/Pages/Folder.aspx
I get the login prompt but than it only shows "Could not find file 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\vsuzsax3.dll'." while the dll is always a different one. It looks like whole path C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp
is not available at that moment. If I than restart my SQL Reporting Services service everything starts working again for one or two days...
Any idea where I can start debugging this issue?
kind regards,
Dieter Tontsch, mobileX AG

Hello Vicky, thanks for your reply,
see attached a log-file snippet while it just occurs again. It might be a file permission issue. I will do the changes suggested by you once I am back to the office. It is true that yet the Reporting Service runs under Network Service account. Some questions:
- you suggested to change SQL Service Logon, do you realy mean SQL service itself, or just Reporting services? Should I change all SQL services logon credentials to the same account?
- second you said "Provide full access to the "\Documents and Settings\NetworkService\Local Settings\Temp" for any account that needs to access the report server.". I am not sure which path is meant with "\Documents and Settings\NetworkService\Local
Settings\Temp" since there is no Documents and settings, this is users now. But I guess this is not the place you mean since there is no profile for NetworkService in there.
But one more thin, this temporary file the server complains about like in this case 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\uiy82bjf.dll' is not existing at this point. I don't know if this is relevant, but it looks to me like it looks
for a temporary file which is already gone by some reason. So, it is not the problem that the file cannot be accessed, but it is not there or not there any more, I don't know. Fact is that immediately after a Reporting Service restart, with no changes made,
the Services work again for a while.
Dieter
ui!ReportManager_0-4!115c!04/30/2015-08:00:43:: e ERROR: System.IO.FileNotFoundException: Could not find file 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\uiy82bjf.dll'.
File name: 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\uiy82bjf.dll'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at Microsoft.CSharp.CSharpCodeGenerator.FromFileBatch(CompilerParameters options, String[] fileNames)
at Microsoft.CSharp.CSharpCodeGenerator.FromSourceBatch(CompilerParameters options, String[] sources)
at Microsoft.CSharp.CSharpCodeGenerator.System.CodeDom.Compiler.ICodeCompiler.CompileAssemblyFromSourceBatch(CompilerParameters options, String[] sources)
at System.CodeDom.Compiler.CodeDomProvider.CompileAssemblyFromSource(CompilerParameters options, String[] sources)
at System.Xml.Serialization.Compiler.Compile(Assembly parent, String ns, XmlSerializerCompilerParameters xmlParameters, Evidence evidence)
at System.Xml.Serialization.TempAssembly.GenerateAssembly(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, Evidence evidence, XmlSerializerCompilerParameters parameters, Assembly assembly, Hashtable assemblies)
at System.Xml.Serialization.TempAssembly..ctor(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, String location, Evidence evidence)
at System.Xml.Serialization.XmlSerializer.GetSerializersFromCache(XmlMapping[] mappings, Type type)
at System.Xml.Serialization.XmlSerializer.FromMappings(XmlMapping[] mappings, Type type)
at System.Web.Services.Protocols.SoapClientType..ctor(Type type)
at System.Web.Services.Protocols.SoapHttpClientProtocol..ctor()
at Microsoft.SqlServer.ReportingServices2010.ReportingService2010..ctor()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010..ctor(String reportServerUrl, Boolean useSharePointProxy)
at Microsoft.ReportingServices.UI.Global.get_ReportServer()
at Microsoft.ReportingServices.UI.Global.SecureAllAPI()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel()
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ui!ReportManager_0-4!115c!04/30/2015-08:00:43:: e ERROR: System.IO.FileNotFoundException: Could not find file 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\_dww3cf5.dll'.
File name: 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\_dww3cf5.dll'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at Microsoft.CSharp.CSharpCodeGenerator.FromFileBatch(CompilerParameters options, String[] fileNames)
at Microsoft.CSharp.CSharpCodeGenerator.FromSourceBatch(CompilerParameters options, String[] sources)
at Microsoft.CSharp.CSharpCodeGenerator.System.CodeDom.Compiler.ICodeCompiler.CompileAssemblyFromSourceBatch(CompilerParameters options, String[] sources)
at System.CodeDom.Compiler.CodeDomProvider.CompileAssemblyFromSource(CompilerParameters options, String[] sources)
at System.Xml.Serialization.Compiler.Compile(Assembly parent, String ns, XmlSerializerCompilerParameters xmlParameters, Evidence evidence)
at System.Xml.Serialization.TempAssembly.GenerateAssembly(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, Evidence evidence, XmlSerializerCompilerParameters parameters, Assembly assembly, Hashtable assemblies)
at System.Xml.Serialization.TempAssembly..ctor(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, String location, Evidence evidence)
at System.Xml.Serialization.XmlSerializer.GetSerializersFromCache(XmlMapping[] mappings, Type type)
at System.Xml.Serialization.XmlSerializer.FromMappings(XmlMapping[] mappings, Type type)
at System.Web.Services.Protocols.SoapClientType..ctor(Type type)
at System.Web.Services.Protocols.SoapHttpClientProtocol..ctor()
at Microsoft.SqlServer.ReportingServices2010.ReportingService2010..ctor()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010..ctor(String reportServerUrl, Boolean useSharePointProxy)
at Microsoft.ReportingServices.UI.Global.get_ReportServer()
at Microsoft.ReportingServices.UI.Global.SecureAllAPI()
at Microsoft.ReportingServices.UI.GlobalLinks.Control_Init(Object sender, EventArgs args)
ui!ReportManager_0-4!115c!04/30/2015-08:00:43:: e ERROR: HTTP status code --> 500
-------Details--------
System.IO.FileNotFoundException: Could not find file 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\uiy82bjf.dll'.
File name: 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\uiy82bjf.dll'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at Microsoft.CSharp.CSharpCodeGenerator.FromFileBatch(CompilerParameters options, String[] fileNames)
at Microsoft.CSharp.CSharpCodeGenerator.FromSourceBatch(CompilerParameters options, String[] sources)
at Microsoft.CSharp.CSharpCodeGenerator.System.CodeDom.Compiler.ICodeCompiler.CompileAssemblyFromSourceBatch(CompilerParameters options, String[] sources)
at System.CodeDom.Compiler.CodeDomProvider.CompileAssemblyFromSource(CompilerParameters options, String[] sources)
at System.Xml.Serialization.Compiler.Compile(Assembly parent, String ns, XmlSerializerCompilerParameters xmlParameters, Evidence evidence)
at System.Xml.Serialization.TempAssembly.GenerateAssembly(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, Evidence evidence, XmlSerializerCompilerParameters parameters, Assembly assembly, Hashtable assemblies)
at System.Xml.Serialization.TempAssembly..ctor(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, String location, Evidence evidence)
at System.Xml.Serialization.XmlSerializer.GetSerializersFromCache(XmlMapping[] mappings, Type type)
at System.Xml.Serialization.XmlSerializer.FromMappings(XmlMapping[] mappings, Type type)
at System.Web.Services.Protocols.SoapClientType..ctor(Type type)
at System.Web.Services.Protocols.SoapHttpClientProtocol..ctor()
at Microsoft.SqlServer.ReportingServices2010.ReportingService2010..ctor()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010..ctor(String reportServerUrl, Boolean useSharePointProxy)
at Microsoft.ReportingServices.UI.Global.get_ReportServer()
at Microsoft.ReportingServices.UI.Global.SecureAllAPI()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel()
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ui!ReportManager_0-4!115c!04/30/2015-08:00:44:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)

SHAREPOINT 2013 WITH SQL SERVER 2012 REPORTING SERVICES - NOT WORKING

The SQL 2012 with SP1 is installed but the Reporting Services are not working and not able to connect the Sharepoint with it.
i also TRIED TO install THE ADD-ON (rsSharePoint.msi) but it doesn't connect and show the Sharepoint Mode and cannot connect the Reporting services.
If I install the Reporting Native feature then the reporting service config displays the Instance else doesn't show and connect to the sql server.
But I am able to access the Configuration manager and TCP/IP are enabled.
I have installed SQL 2012 and Sharepoint 2013. Please revert soon.
Tks - Vinay

Reporting Service
http://msdn.microsoft.com/en-us/library/jj219068.aspx
http://blogs.msdn.com/b/biblog/archive/2012/12/04/installing-and-configuring-sql-reporting-services-on-sharepoint-2013.aspx
http://blogs.msdn.com/b/psssql/archive/2011/02/18/sharepoint-adventures-setting-up-reporting-services-with-sharepoint-integration.aspx
http://dinesql.blogspot.in/2010/06/configuring-reporting-services-2008-r2_07.html
http://www.codeproject.com/Articles/355461/Dynamically-Pointing-to-Shared-Data-Sources-on-SQL
http://www.heysharepoint.com/problems-with-sql-2012-reporting-services/
http://andrewcbancroft.com/2012/06/30/troubleshooting-sql-server-2012-reporting-services-and-sharepoint-2010-integration-part-1/
Please find the helping URL
Thanks
Jaison A
http://infomoss.blogspot.in

Sharepoint 2013 SSRS Interaction with Sql Server 2012 Reporting Services connecting to Sql Server 2008 R2 database

Hi
I'm working on upgrading sharepoint 2010 to sharepoint 2013 with sql server 2008 r2. I've ran into some problems but have been able to get a test farm upgraded. However to run SSRS 2013 it seems Sql Server 2012 Reporting Services are required. Upgrading
to a full sql server 2012 database isn't an option. I know that sql server 2012 reporting services can use sql server 2008 r2 as a catalog and content database so I was wondering could this be a workaround? Importantly would I need a separate machine/virtual
machine to host sql server 2012 reporting services? or could it live on the sql server 2008 r2 machine? Any pointers appreciated. Thanks Dan

Remember that SSRS must be deployed on the SharePoint server. Having said that, yes you can install SSRS 2012 SP1 on a server running SQL 2008 R2. And yes, you can use 2008 R2 as your Database Engine server while SSRS 2012 SP1 runs on the SharePoint server.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to show a filter of the values in SCCM 2012 report?

I didn't see a forum for SCCM 2012 reporting, only SCCM 2007 Reporting, so I hope I am posting in the correct forum for this.
We upgraded to SCCM 2012 R2 and when running a report and entering values we can no longer type in a filter and then see a filtered list of values like in SCCM 2007.
Is there a solution for this? This was very useful especially in the Add/Remove report because many times we don't know exactly what to enter.
Below is a snapshot of what we did in SCCM 2007.

Garth, unfortunately, I don't. I was fair at SCCM 2007 reporting and modifying SQL statements, but it seems everything has changed with SCCM 2012 reporting. For the specific SCCM 2012 report I mentioned, "Computers with specific software
registered in Add Remove Programs", is there some code I could paste in somewhere to get it to operate like the SCCM 2007 report?
Are you using BIDS or Report Builder. (Keep in mind that I recommend BIDS over RP)
Here are the basic steps:
Review the SQL for the Prompt
Add a variable to the prompt
Import; refresh the SQL query within the dataset
Move that the new variable is BEFORE the existing variable
Enter in the Prompt text “Enter computer filer”
Test to make sure everything is nice
Upload the report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Share Data Source between multiple report projects in Microsoft SQL Server 2012 Reporting Services

I have a reports solution in 2012 which contains multiple report projects one each for target deployment folder and we use TFS 2012 for report deployment.
We have a template project which has a bunch of template reports and all the datasources used in different reports.
When I develop a report, I cannot "Preview" in TFS but, for deploy this used to work fine util the reports solution was in TFS 2010 & Visual Studio 2008 R2. Since we moved to TFS 2012 & SSRS 2012 not being able to deploy till I create all
the necessary datasources for each project and now all the developers complaining that they cannot develop reports in TFS itself as they cannot preview (this problem was existing previously) and now not being able to deploy as it errors for each report "Could
not find specified rds file". I tried messing around with the .rptproj file DataSources tag that did not help either by modifying it like below.
<DataSources>
<ProjectItem>
<Name>DB.rds</Name>
<FullPath>Template\Data Source\DB.rds</FullPath>
</ProjectItem>
</DataSources>
Is there a way I could share a Data Source between multiple projects in Microsoft SQL Server 2012 Reporting Services?
Thanks in advance.............
Ione

Hi ione721,
According to your description, you want to create a shared data source which works for multiple projects. Right?
In Reporting Services, A shared data source is a set of data source connection properties that can be referenced by multiple reports, models, and data-driven subscriptions that run on a Reporting Services report server. It must be within one project.
We can't specify one data source working for multple projects. In this scenario, we suggest you put those reports into one project. Otherwise you can only create one data source for each project.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

AX Dynamics 2012 Reporting Service Extension Error - The user or gorup name is not recognized

Hi,
I am currently installing AX Dynamics 2012 Reporting Service Extension on one of our machine. But this always fails during the installation with this error:
DynamicsSetupLog
Our current domain is MWSerp
An error occurred while adding users AxERP\qaproxy, AxERP\qaaos, MWSerp\qaproxy to the SQL Server Reporting Services DynamicsAXBrowser role in the folder dynamicsAX. The error is: The user or group name AxERP\qaproxy is not recognized.
The database was restored from our old Ax Deployment on a different domain - AxERP if you noticed on the error, 2 domains are present: AxERP (old domain) and MWSerp (our existing).
I find it peculiar that it is still adding old accounts from the old domain which is not existent. Tried looking for it on the registry or on the AX Dynamics User account but there are no entries on AxERP\qaaos and AxERP\qaproxy on it.
Do you have any clue on where AX Installer is picking up those information which needs to be added on the DynamicsAXBrowser? Tried stopping /starting the AOS Service and generating WCF. Also tried looking on registry but couldnt find it. How can I bypass
it so the Extension will be installed successfully. I also tried not deploying the reports, just the Extension only.
Regards,

I'd ask them here.
http://community.dynamics.com/product/ax/f/33.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

SAP NetWeaver BI with Microsoft SQL Server 2012 Reporting Services using XMLA

I am currently implementing SAP BW and am trying to connect the Microsoft SQL Server 2012 Reporting Services product. I am able to connect to SAP BW but there is one problem when i click on Query Designer after adding a DataSet the screen just displays the dialog prompt saying '' NO CUBES WERE FOUND. VERIFY THAT YOU HAVE SELECTED A VALID CATALOG''.
The advanced information depicts the following:

Hi Raunak T,
Just a very basic question from my end:
I believe that "Microsoft SQL server Report Builder" is the 3rd party which uses MDX as interface.
Have you set the property using OLE DB for OLAP in your queries?
BR
Prabhith

SCCM 2012 Reporting Services Website

Similar Messages

Maybe you are looking for