SCCM 2012 Schema prep.
Hey all,
I have been put in a position that contains an SCCM 2012 server. I noticed that when it was installed, the schema was not extended. The questions I have is, what kind of issues might I see if I were to try to extend the schema for SCCM now. Would the server
still work? Do I need to uninstall and reinstall? Would it start working properly with AD? This is an environment that was very vanilla when I started working with it.
Even if you direct me in the ight direction.
Thank you in advance for your help.
Scott
As previously commented: no risk at all. Just check publishing settings.
It is also stated in the documentation (multiple times) that you can extend after the actual setup.
Here is the link for reference:
http://technet.microsoft.com/en-us/library/gg712272.aspx
Tim | Blog |
@Tim_DK
Similar Messages
-
Sccm 2012 extent the active directory schema error
Hello
I am experiecing an issue when attempting to extend my AD Schema for SCCM 2012
<12-10-2014 20:04:33> Modifying Active Directory Schema - with SMS extensions.
<12-10-2014 20:04:33> DS Root:CN=Schema,CN=Configuration,DC=,DC=com
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Site-Code. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Assignment-Site-Code. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Site-Boundaries. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Roaming-Boundaries. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Default-MP. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Device-Management-Point. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-MP-Name. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-MP-Address. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Health-State. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Source-Forest. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Ranged-IP-Low. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Ranged-IP-High. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Version. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Capabilities. Error code = 8224.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Management-Point. Error code = 8202.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Server-Locator-Point. Error code = 8202.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Site. Error code = 8202.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Roaming-Boundary-Range. Error code = 8202.
<12-10-2014 20:04:33> Failed to extend the Active Directory schema, please find details in "C:\ExtADSch.log".
any one help me to fix this issueHi,
It is most likley due to a replication Issue in your AD, check the previous thread on the topic:https://social.technet.microsoft.com/Forums/systemcenter/en-US/1d377109-4fa9-4608-8a3a-cefd436e82ee/error-8224-when-extending-active-directory-schema
Make sure that all replication issues are solved and try again.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Extending Schema for SCCM 2012 R2
I have looked everywhere for this information, but it's not listed in the LDF file nor is it notated on the MS documentation.
When extending the schema using extadsch.exe from the media for SCCM 2012 R2, does it touch the schema version or does it only add the classes required? Is there a difference in versions of extadsch.exe 5.0 and the exadsch.exe in the SCCM 2007 media?Active Directory schema extensions for Configmgr 2012 are similar to the Active Directory schema extensions for Configmgr 2007.
If the schema was already extended for Configmgr 2007, you dont need to extend schema again for Configmgr 2012.
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr -
Hi all,
we were in the process of installing SCCM 2012 R2 in our lab, we have extended the schema & schema extension creates classes & attributes we just wanted to know where we can find these Classes & attributes in AD. where we can see it being created
in AD.
We have seen the successful schema extension in the log files but we also wanted to get the details from AD side.
Please suggest.
Thanks,
Pranay.This has all the details
But in summary:
Attributes and Classes Added by the Configuration Manager Schema Extensions
When you extend the Active Directory schema for ConfigMgr 2012, the following attributes and classes are added to Active Directory Domain Services:
Attributes:
cn=mS-SMS-Assignment-Site-Code
cn=mS-SMS-Capabilities
cn=MS-SMS-Default-MP
cn=mS-SMS-Device-Management-Point
cn=mS-SMS-Health-State
cn=MS-SMS-MP-Address
cn=MS-SMS-MP-Name
cn=MS-SMS-Ranged-IP-High
cn=MS-SMS-Ranged-IP-Low
cn=MS-SMS-Roaming-Boundaries
cn=MS-SMS-Site-Boundaries
cn=MS-SMS-Site-Code
cn=mS-SMS-Source-Forest
cn=mS-SMS-Version
Classes:
cn=MS-SMS-Management-Point
cn=MS-SMS-Roaming-Boundary-Range
cn=MS-SMS-Server-Locator-Point
cn=MS-SMS-Site
The Active Directory schema extensions might include attributes and classes that are carried forward from previous versions of the product but not used by ConfigMgr 2012. For example:
o Attribute: cn=MS-SMS-Site-Boundaries
o Class: cn=MS-SMS-Server-Locator-Point -
SCCM 2012 Setup error when setting SQL connection info "Network Path Was Not Found"
Hello.
I'm facing an issue during CCM 2012 SP1 Beta Setup on step "DB INFORMATION"
My lab is set like that:
1x Front-end WS 2012 rtm "CCM Install on it" (Fresh install = no features installed)
1x Back-end WS 2012 rtm SQL Server 2012 SP1 (I don't know if this is supported).
On the sql Side there is already a first instance with SCVMM 2012 SP1(beta) environment that work well.
A second dedicated instance is ready for CCM install.
Named Pipes enabled , TCP/IP Enabled
Firewall rules for 1433 and 4022 are enabled on the Domain profile ,other profiles are disabled.
Instance Service is running with a domain account
Everything is published in AD (delegations for computer account), Schema Prep already done manually.
I'm Able to resolve dns name of the SQL server on the CCM VM and telnet 4022 + 1433 ports.
For the finish here is the end of Setup Wizard logs:
Exception rethrown at [0]:
à System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
à System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
à Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
à Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
à Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
à System.Windows.Controls.Button.OnClick()
à System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
à System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
à System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
à System.Windows.Input.InputManager.ProcessStagingArea()
à System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
à System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
à System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
à System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
à System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
à System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
14/12/2012 08:21:06: ConfigMgrSetupWizard Information: 1 : Creating SQL connection to database SCCM\master on server SQL001.IT-DEPLOYMENT.LAB.
14/12/2012 08:21:53: ConfigMgrSetupWizard Error: 1 : Exception message: [Le chemin réseau n’a pas été trouvé.
], Exception details: [System.IO.IOException: Le chemin réseau n’a pas été trouvé.
Server stack trace:
à Microsoft.Win32.RegistryKey.Win32ErrorStatic(Int32 errorCode, String str)
à Microsoft.Win32.RegistryKey.OpenRemoteBaseKey(RegistryHive hKey, String machineName)
à Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.GetSqlConnection(String databaseName, String serverName, Boolean encrypt)
à Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.CheckSqlConnection(String serverName, String instanceName)
à System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
à System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
à System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
à System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
à Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
à Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
à Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
à System.Windows.Controls.Button.OnClick()
à System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
à System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
à System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
à System.Windows.Input.InputManager.ProcessStagingArea()
à System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
à System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
à System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
à System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
à System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
à System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
Please help me; I'm driving crazy.
Kévin KISOKA - MCTS Exchange Configuring, MCTS Hyper-V Server Virtualization3 Steps are neccessary:
1. Make sure the Windows Firewall Service on the SQL Server is running and set to automatic
2. Add the SQL EXE as a Program Exception to the Firewall on the SQL Server:
To add a program exception to the firewall using the Windows Firewall item in Control Panel.
- On the Exceptions tab of the Windows Firewall item in Control Panel, click
Add a program.
- Browse to the location of the instance of SQL Server that you want to allow through the firewall, for example
C:\Program Files\Microsoft SQL Server\MSSQL11.<instance_name>\MSSQL\Binn, select
sqlservr.exe, and then click Open
- Click OK.
From http://technet.microsoft.com/en-us/library/cc646023.aspx
3. The last step neccessary, on the SQL Server, is to set File and Printer Sharing "on". When this is off, the following error occurs: "Network Path was not found" -
Sccm client v4 wont install and install client v5 - SCCM 2012 R2
Hi, I am coming to the end of a SCCM 2012 R2 client deployment. I have come across 2 machines (so far)that have the SCCM 2007 (v4) client installed, and although the task is set to uninstall from the server the v5 client will not installed. iI have been
using this an as template:
http://eskonr.com/2010/11/sccm-client-installation-troubleshooting-steps-check-list/
I have ran the install seperatelty from the server (boxed ticked - Uninstall existing Config Manager client) - No Install
The ccmsetup folder is created - c$\Windows\ccmsetup, but only has 3 files, no logs folder
Other machines on site has the v5 client
Checked ping from client to server and vice versa (no firewall enabled)
Boundaries/Schema/DNS - ok
Checked all local event logs.
i know you can run the local uninstall command, but as the network is vast i would like to fix to come from the server, rather than having to do this on the client.
Any tips would be great going forward.
SCCM 2012 R2 - Windows 7 Enterprise SP1Hi,
I ensured the account used for the install was in the local admins group.
From the ccm.log on the server, i got these erros, been googling but nothing yet:
---> ERROR: Unable to start service "ccmsetup" on machine "LCD12121", error = 1075. SMS_CLIENT_CONFIG_MANAGER 22/10/2014 12:01:43 1460 (0x05B4)
---> Failed to install CCM Client Bootstrap component on client (1075) SMS_CLIENT_CONFIG_MANAGER 22/10/2014 12:01:43 1460 (0x05B4)
Execute query exec [sp_CP_SetLastErrorCode] 2097153910, 1075 SMS_CLIENT_CONFIG_MANAGER 22/10/2014 12:01:43 1460 (0x05B4)
Also, is there a way to run a report on which machines dont have the sccm client/install issues?
Thanks -
Is there a way to change an existing SCCM 2012 site server intranet FQDN name to lowercase?
Does anyone know if there is a way to change the intranet (not internet) FQDN name of an existing SCCM 2012 site server to all lowercase letters? You used to be able to do this in SCCM 2007.
I had a problem with WSUS updates not working via SCCM 2012 R2 during an operating system deployment. When examining the c:\Windows\WindowsUpdate.log I found the following errors:
WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <****:8080;****:8080> Bypass List used : <(null)> Auth Schemes used : <>
+ Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
After a LONG time researching this error I found it was related to the fact we were using a WPAD proxy implementation and apparently this doesnt cope well with uppercase characters for the WSUS server URL. I changed our GPO to be using lowercase lettering
but when examining the WindowsUpdate log again it still showed as being in uppercase. In the end I found that despite what your GPO setting says, this can get over written by the SCCM site server's own published WSUS location. You can check this by entering
the following command:
wmic /namespace:"\\root\CCM\SoftwareUpdates\WUAHandler" PATH CCM_UpdateSource
Unfortunatelty in SCCM 2012 there is no GUI way to amend the intranet FQDN used for the WSUS location so I then turned to directly editing the database (which anyone will tell you is not recommended, but by this point i was DESPERATE!).
In the end it solved all my troubles so if anyone finds themselves in this situation, you can fix it by going to the SCCM database and within the table 'WSUSServerLocations', change the WSUSServerName to be in lowercase letters. -
SCCM 2012 R2: Build and Capture - Windows 8.1 prompting for network
I have upgraded my SCCM 2012 SP1 (CU2) to SCCM 2012 R2 and I am attempting to Build and Capture Windows 8.1 Enterprise. Everything is perfect except for the OS prompting for a network selection during the process, if I click "next" on that screen
the Capture finishes without incident. The same is true of the Deploy as well...
Is this a bug from my upgrade?
Portland Public Schools / Systems Administrator IIHi LillonelC
Can you point out how and where to do this?
When capturing with MDT 2013 on VMware I do not see this, naturaly, since the "machine" only has one network adapter.
But when deploying to a Laptop I get the wireless Setup screen...
On beforehand Thank You!
With kind regards
We aren't using MDT but what we did was create a package called Windows 8.1 - Compnents. In it placed a file named "32Bit-Unattend.xml" and 1 named "64Bit-Unattend.xml".
During the capture in the "Apply Operating System Image" I put a check in the box "Use an unattended or Sysprep answer file for a custom installation". The package was Windows 8.1 - Compnents the File name was "32Bit-Unattend.xml".
I did the same for 64-bit and used the 64-bit version.
Here is content of the 32-bit file:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<OOBE>
<HideEULAPage>true</HideEULAPage>
<HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
<NetworkLocation>Work</NetworkLocation>
<HideOnlineAccountScreens>true</HideOnlineAccountScreens>
<HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
<HideLocalAccountScreen>true</HideLocalAccountScreen>
</OOBE>
</component>
</settings>
<cpi:offlineImage cpi:source="wim://SERVERNAME/e$/osimages/win_8.1_x86/sources/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Here is the content of the 64-bit file:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<OOBE>
<HideEULAPage>true</HideEULAPage>
<HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
<NetworkLocation>Work</NetworkLocation>
<HideOnlineAccountScreens>true</HideOnlineAccountScreens>
<HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
<HideLocalAccountScreen>true</HideLocalAccountScreen>
</OOBE>
</component>
</settings>
<cpi:offlineImage cpi:source="wim://SERVERNAME/e$/osimages/win_8.1_x64/sources/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
If that doesn't help I can try to clarify it a bit further.
PS You won't need to do this for the deploy, only the capture.
Portland Public Schools / Systems Administrator II -
SCCM 2012 CU2 OSD forest trust: ReleaseRequest failed with error code 0x87d00317
Hello,
Actually i have a difficult Problem with my SCCM 2012 R2 CU2 Windows 7 x64 SP1 Tasksequence:
I get the folowing error in smsts.log:
::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,811) TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
GetTsRegValue() is unsuccessful. 0x80070002. TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
End program: TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Finalize logging request ignored from process 1736 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Waiting for CcmExec service to be fully operational TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
CcmExec service is up and fully operational TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Access handle will be read from _SMSTSActiveRequestHandle TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Access handle: {B699D570-B2BF-4874-8CB7-3B208B380969} TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Attempting to release request using {B699D570-B2BF-4874-8CB7-3B208B380969} TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
CoCreateInstance succeeded TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=87d00317 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136) TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
ReleaseRequest failed with error code 0x87d00317 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Task Sequence Manager could not release active TS request. code 87D00317 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Here is the complete smsts.log: http://1drv.ms/1pwTEBf
To explain the Problem in Detail:
The SCCM Primary Site Server and the Clients are in different trusted (bidirectional) forests!
Everythings working fine in this Scenario, I can install SCCM Agent on the Clients with Manual ccmsetup and with Client Push Installation. Additionally i can deploy Software Updates and so on... only OSD is crashing in the releaserequest step.
During my Tasksequence new Clients are joined to Domain A while SCCM Primary Site Server is installed in Domain B
If I change my TS and let the Clients also join Domain B everything works without any Problems and the Tasksequence finish without any Errors.
My Problem must be related to the different Domains and the forest trust.
My Setup:
MP published to DNS in both domains
Schema Extended in both domains
System Management Container published and verified in both domains
ccmsetup Parameters in TS: ccmsetup SMSMP=sccm.domain.b FSP=sccm.domain.b DNSSUFFIX=Domain.b
Network Access account configured with Domain B account
Domain Join account has create Computer rights on the OU in Domain A (Domain join is successful)
DNs conditional forwarders configured in both Domains and DNS resolutin is working in both directions
Any suggestions?
Many thanks.
regards,
ChristianHi Christian,
So do you actual get an error message in your TS or is it just failing to join Domain B? (Could be both if the machines fails to join the domain).
Can you review netsetup.log on the machines after the issue and see what error message you might be getting during the domain join process?
Also, if it a domain join issue, can you try manually joining to domain B using the same service account? -
Client Push Not Working SCCM 2012
I am new to SCCM and have a test rig SCCM 2012 for testing, problem is the client push fails every time and I am at a loss to explain why. I have tried removing and reading the DP, FSP and MP roles (Both these are on the SCCM core server) I have run IIS
reset, removed all AD configured Boundaries and Groups in favor of IP range but I keep getting the same errors. Any advice here would be greatly appreciated... Below is this mornings logs highlighting the failure.
<![LOG[==========[ ccmsetup started in process 5764 ]==========]LOG]!><time="11:31:48.304-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="7628" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X64]LOG]!><time="11:31:48.305-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="7628" file="util.cpp:1837">
<![LOG[Updated security on object C:\Windows\ccmsetup\cache\.]LOG]!><time="11:31:48.305-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="7628" file="ccmsetup.cpp:9281">
<![LOG[Launch from folder C:\Windows\ccmsetup\]LOG]!><time="11:31:48.306-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="7628" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="11:31:48.306-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="7628" file="ccmsetup.cpp:727">
<![LOG[In ServiceMain]LOG]!><time="11:31:48.308-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="ccmsetup.cpp:3365">
<![LOG[Running on 'Microsoft Windows Server 2012 Standard' (6.2.9200). Service Pack (0.0). SuiteMask = 272. Product Type = 18]LOG]!><time="11:31:48.366-120" date="01-12-2014" component="ccmsetup" context="" type="1"
thread="6436" file="util.cpp:1919">
<![LOG[Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="11:31:48.366-120" date="01-12-2014" component="ccmsetup" context="" type="1"
thread="6436" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="11:31:48.366-120" date="01-12-2014" component="ccmsetup" context=""
type="1" thread="6436" file="ccmsetup.cpp:3775">
<![LOG[Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="11:31:48.366-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436"
file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="11:31:48.368-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT: 80]LOG]!><time="11:31:48.369-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:8617">
<![LOG[CCMHTTPSPORT: 443]LOG]!><time="11:31:48.369-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:8632">
<![LOG[CCMHTTPSSTATE: 224]LOG]!><time="11:31:48.369-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:8650">
<![LOG[CCMHTTPSCERTNAME: ]LOG]!><time="11:31:48.369-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:8668">
<![LOG[FSP: VKYV-HV01]LOG]!><time="11:31:48.369-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:8720">
<![LOG[CCMFIRSTCERT: 1]LOG]!><time="11:31:48.370-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:8778">
<![LOG[Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436"
file="ccmsetup.cpp:4539">
<![LOG[Retry time: 10 minute(s)]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:4540">
<![LOG[MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:4541">
<![LOG[MSI properties: INSTALL="ALL" SMSSITECODE="VSI" FSP="VKYV-HV01" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="11:31:48.371-120"
date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:4542">
<![LOG[Source List:]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:4550">
<![LOG[ \\VKYV-HV01.VKYV.LAN\SMSClient]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436"
file="ccmsetup.cpp:4557">
<![LOG[ \\VKYV-HV01.VKYV.LAN\SMSClient]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436"
file="ccmsetup.cpp:4566">
<![LOG[MPs:]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:4569">
<![LOG[ VKYV-HV01.VKYV.LAN]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436"
file="ccmsetup.cpp:4584">
<![LOG[No version of the client is currently detected.]LOG]!><time="11:31:48.374-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:2748">
<![LOG[Updated security on object C:\Windows\ccmsetup\.]LOG]!><time="11:31:48.750-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="ccmsetup.cpp:9281">
<![LOG[Sending Fallback Status Point message to 'VKYV-HV01', STATEID='100'.]LOG]!><time="11:31:48.750-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:9756">
<![LOG[Failed to get client version for sending messages to FSP. Error 0x8004100e]LOG]!><time="11:31:48.752-120" date="01-12-2014" component="ccmsetup" context="" type="2" thread="6436" file="ccmsetup.cpp:9838">
<![LOG[Params to send FSP message '5.0.7958.1000 Deployment ']LOG]!><time="11:31:48.752-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="ccmsetup.cpp:9887">
<![LOG[State message with TopicType 800 and TopicId {037AE2A1-3C8B-482A-A180-04392D0312BA} has been sent to the FSP]LOG]!><time="11:31:49.020-120" date="01-12-2014" component="FSPStateMessage" context="" type="1"
thread="6436" file="fsputillib.cpp:752">
<![LOG[Running as user "SYSTEM"]LOG]!><time="11:31:49.058-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:1995">
<![LOG[Detected 44815 MB free disk space on system drive.]LOG]!><time="11:31:49.059-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="util.cpp:628">
<![LOG[Checking Write Filter Status.]LOG]!><time="11:31:49.059-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:2024">
<![LOG[This is not a supported write filter device. We are not in a write filter maintenance mode.]LOG]!><time="11:31:49.059-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436"
file="ccmsetup.cpp:2051">
<![LOG[Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=VSI))']LOG]!><time="11:31:49.179-120" date="01-12-2014" component="ccmsetup" context="" type="0"
thread="6436" file="lsad.cpp:656">
<![LOG[OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>VSI</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=VSI FSP=VKYV-HV01</CommandLine> </CCM><FSP> <FSPServer>VKYV-HV01.VKYV.LAN</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0"
/></Capabilities><Domain Value="VKYV.LAN" /><Forest Value="VKYV.LAN" /></ClientOperationalSettings>']LOG]!><time="11:31:49.228-120" date="01-12-2014" component="ccmsetup" context=""
type="0" thread="6436" file="lsadcache.cpp:236">
<![LOG[Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown.]LOG]!><time="11:31:49.229-120" date="01-12-2014" component="ccmsetup" context="" type="1"
thread="6436" file="ccmutillib.cpp:373">
<![LOG[The MP name retrieved is 'VKYV-HV01.VKYV.LAN' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>']LOG]!><time="11:31:49.229-120"
date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="lsadcache.cpp:334">
<![LOG[MP 'VKYV-HV01.VKYV.LAN' is compatible]LOG]!><time="11:31:49.229-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="lsadcache.cpp:339">
<![LOG[Retrieved 1 MP records from AD for site 'VSI']LOG]!><time="11:31:49.229-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="lsadcache.cpp:287">
<![LOG[Retrived site version '5.00.7958.1000' from AD for site 'VSI']LOG]!><time="11:31:49.231-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="siteinfo.cpp:575">
<![LOG[SiteCode: VSI]LOG]!><time="11:31:49.231-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:2076">
<![LOG[SiteVersion: 5.00.7958.1000]LOG]!><time="11:31:49.231-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:2077">
<![LOG[Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.]LOG]!><time="11:31:49.231-120" date="01-12-2014" component="ccmsetup" context="" type="1"
thread="6436" file="ccmsetup.cpp:2111">
<![LOG[Only one MP VKYV-HV01.VKYV.LAN is specified. Use it.]LOG]!><time="11:31:49.232-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:10080">
<![LOG[Searching for DP locations from MP(s)...]LOG]!><time="11:31:49.232-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:11018">
<![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="11:31:49.232-120" date="01-12-2014" component="LocationServices" context="" type="1" thread="6436" file="lsad.cpp:770">
<![LOG[Local Machine is joined to an AD domain]LOG]!><time="11:31:49.232-120" date="01-12-2014" component="LocationServices" context="" type="0" thread="6436" file="lsad.cpp:714">
<![LOG[Current AD forest name is VKYV.LAN, domain name is VKYV.LAN]LOG]!><time="11:31:49.235-120" date="01-12-2014" component="LocationServices" context="" type="1" thread="6436" file="lsad.cpp:842">
<![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="11:31:49.237-120" date="01-12-2014" component="LocationServices" context="" type="0" thread="6436" file="ccmiputil.cpp:117">
<![LOG[Begin checking Alternate Network Configuration]LOG]!><time="11:31:49.237-120" date="01-12-2014" component="LocationServices" context="" type="0" thread="6436" file="ccmiputil.cpp:1095">
<![LOG[Finished checking Alternate Network Configuration]LOG]!><time="11:31:49.239-120" date="01-12-2014" component="LocationServices" context="" type="0" thread="6436" file="ccmiputil.cpp:1172">
<![LOG[Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="VSI"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
<ADSite Name="Default-First-Site-Name"/>
<Forest Name="VKYV.LAN"/>
<Domain Name="VKYV.LAN"/>
<IPAddresses>
<IPAddress SubnetAddress="10.6.2.0" Address="10.6.2.2"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="11:31:49.256-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="siteinfo.cpp:96">
<![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{CC48E819-7755-4650-83AC-8BC823C06C8C}</ID><SourceHost>VKYV-HV01</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:VKYV-HV01:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>VKYV-HV01.VKYV.LAN</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-01-12T09:31:49Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1096"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="11:31:49.256-120" date="01-12-2014"
component="ccmsetup" context="" type="0" thread="6436" file="siteinfo.cpp:177">
<![LOG[CCM_POST 'HTTP://VKYV-HV01.VKYV.LAN/ccm_system/request']LOG]!><time="11:31:49.257-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="httphelper.cpp:807">
<![LOG[Failed to receive ccm message response. Status code = 403]LOG]!><time="11:31:49.434-120" date="01-12-2014" component="ccmsetup" context="" type="2" thread="6436" file="httphelper.cpp:1694">
<![LOG[GetDPLocations failed with error 0x80004005]LOG]!><time="11:31:49.435-120" date="01-12-2014" component="ccmsetup" context="" type="3" thread="6436" file="siteinfo.cpp:532">
<![LOG[Failed to get DP locations as the expected version from MP 'VKYV-HV01.VKYV.LAN'. Error 0x80004005]LOG]!><time="11:31:49.435-120" date="01-12-2014" component="ccmsetup" context="" type="2" thread="6436"
file="ccmsetup.cpp:11261">
<![LOG[Sending Fallback Status Point message to 'VKYV-HV01', STATEID='101'.]LOG]!><time="11:31:49.435-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:9756">
<![LOG[Failed to get client version for sending messages to FSP. Error 0x8004100e]LOG]!><time="11:31:49.437-120" date="01-12-2014" component="ccmsetup" context="" type="2" thread="6436" file="ccmsetup.cpp:9838">
<![LOG[Params to send FSP message '5.0.7958.1000 Deployment ']LOG]!><time="11:31:49.437-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="ccmsetup.cpp:9887">
<![LOG[State message with TopicType 800 and TopicId {1D445639-95B1-4EC5-A65F-FC7A721F8061} has been sent to the FSP]LOG]!><time="11:31:49.455-120" date="01-12-2014" component="FSPStateMessage" context="" type="1"
thread="6436" file="fsputillib.cpp:752">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="11:31:49.455-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="ccmsetup.cpp:8835">Does you MP/DP use HTTP or HTTPS? I recommend to start with HTTP and when you have successfully installed a few clients, you can switch to HTTPS if desired. HTTPS based communication requires more steps e.g. client certificates.
Have you extended AD schema and do you see objects in \System\System Management container in AD?
Also, you might have DNS name resolution problem or the firewall is blocking the traffic from the client to MP.
The client is having troubles to successfully talk with MP:
Failed to get DP locations as the expected version from MP 'VKYV-HV01.VKYV.LAN'. Error 0x80004005
Panu -
Dart 7 Image Network Support Broken When Imported into SCCM 2012
Hi guys, I've been trying to get Dart integrated into my Windows 7 and Windows 8.1 Task Sequences recently. Running SCCM 2012 SP1 CU3.
Until today I was able to PXE-boot DaRT7 and DaRT8 images, however the DaRT 7 images are now failing to boot - despite being recreated in
exactly the same way.
I understand that when SCCM imports a boot image the winpeshl.ini is overwritten - originally the DaRT7 images have the following winpeshl.ini entries:
[LaunchApps]
%windir%\system32\netstart.exe,-prompt
%SYSTEMDRIVE%\sources\recovery\recenv.exe
After import to SCCM this looks like:
[LaunchApps]
%SYSTEMDRIVE%\sms\bin\x64\TsBootShell.exe
I dont understand how the DaRT 7 images ever worked, as the first command from those that are stripped out (%windir%\system32\netstart.exe,-prompt) is what would initiate the TCP/IP stack.
Of course, no network = no TS shell, so thre client reboots. If I press F8, load a command shell and manually run %windir%\system32\netstart.exe and then run %windir%\system32\winpeshl.exe the TS shell loads.
Any ideas how I can fix this - essentially I just need the DaRT7 image to bring up the network automatically.
Thanks,
Chris
MCTS 70-640 | MCTS 70-642 | Prince2 Practitioner| ITIL Foundation v3 | http://www.cb-net.co.ukThought I would add that the following unattend.xml has been tested in the root of the image without success:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>Start Network Stack</Description>
<Order>1</Order>
<Path>start /wait X:\Windows\System32\netstart.exe</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>Start DaRT Remote Connection - Custom Launcher</Description>
<Order>2</Order>
<Path>CSCRIPT X:\Windows\System32\PEremote.vbs</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
</settings>
</unattend>
Thanks again.
MCTS 70-640 | MCTS 70-642 | Prince2 Practitioner| ITIL Foundation v3 | http://www.cb-net.co.uk -
User attributes checked by Delta Discovery in SCCM 2012
Hi All,
Since I simply cannot find an answer to my question using google, will ask it here and hope you can help me.
Which EXACT User attributes does Delta Discovery check for in SCCM 2012? Is it possible to manipulate this, and add one more attribute?
Microsoft's answer to this question is a simple: Basic User Information, but that not an exact answer.
Here is the deal. We updated the extensionAttribute12 with computernames, so that we know what the primary device for a User is (I know this feature is present in CM12, but we will not use it for reasons). This information will be collected by User Discovery
and by using a nested query in the device collection, the Primary device will be added to it. This works like a charm, the only issue is time. We need that value to be checked by delta discovery if it has been changed, however this only works with FULL discovery
which is set to 1 week. If I lower this value that might cause serious backlogs, as the jobs get piled up in the inboxes due to the large amount of DDR files. Is there anything we can do? Powershell script, a configuration file in CM12 for delta discovery
or something. We really don't what to set the User discovery to run a FULL scan every 4 hours or so, as I don't know what would happen when checking for 24k Users.
Thank you in advance for any sort of feedback!
Regards,Hi,
Well, I checked the attribute if its replicated to the GC and according to this line isMemberOfPartialAttributeSet: TRUE it does. Will run a test again with delta discovery, and if that failes, will try to change the SystemFlag on it.
dn:CN=ms-Exch-Extension-Attribute-12,CN=Schema,CN=Configuration
>objectClass: top
>objectClass: attributeSchema
>cn: ms-Exch-Extension-Attribute-12
>distinguishedName: CN=ms-Exch-Extension-Attribute-12,CN=Schema,CN=Configuration
>instanceType: 4
>whenCreated: 20050715092317.0Z
>whenChanged: 20110528160036.0Z
>uSNCreated: 6155
>attributeID: 1.2.840.113556.1.2.600
>attributeSyntax: 2.5.5.12
>isSingleValued: TRUE
>rangeLower: 1
>rangeUpper: 2048
>mAPIID: 35928
>uSNChanged: 6155
>showInAdvancedViewOnly: TRUE
>adminDisplayName: ms-Exch-Extension-Attribute-12
>adminDescription: ms-Exch-Extension-Attribute-12
>oMSyntax: 64
>searchFlags: 16
>lDAPDisplayName: extensionAttribute12
>name: ms-Exch-Extension-Attribute-12
>objectGUID: {5AC9437E-18AE-4EE6-909B-94CC1B6EF1C5}
>schemaIDGUID: {167757F7-47F3-11D1-A9C3-0000F80367C1}
>attributeSecurityGUID: {E48D0154-BCF8-11D1-8702-00C04FB96050}
>isMemberOfPartialAttributeSet: TRUE
>objectCategory: CN=Attribute-Schema,CN=Schema,CN=Configuration
>dSCorePropagationData: 16010101000000.0Z
>msDS-IntId: -1992421057 -
Any major changes to the database for SCCM 2012 and Reporting?
I'm in the process of migrating my custom reports from SCCM 2007 to SCCM 2012. I wonder if all the tables / views in SCCM 2007 are the same in SCCM 2012 for my reporting purposes? So far everything I've migrated over appears to work without a problem.
Orange County District AttorneyYes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
The SQL schema for SCCM 2012 has been released here.
https://technet.microsoft.com/en-us/library/dn581978.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
New Site, New server SCCM 2012 R2 install fails at sp_createlocaleinfo
Server 2012 R2 new build, SQL 2012, fresh install, SCCM 2012 R2 new install. All on one system. No clustering.
All the prerequisites check out OK. But the install fails at sp_createlocaleinfo:
INFO: SQL Server script: Create object spprocessdrsrecoveryversionmessage $$<Configuration Manager Setup><01-03-2014 12:27:56.167-60><thread=3292 (0xCDC)>
INFO: SQL Server script: Create object sp_makesureintervalexists $$<Configuration Manager Setup><01-03-2014 12:27:56.198-60><thread=3292 (0xCDC)>
*** -- ~-- Name : sp_CreateLocaleInfo ~-- Definition : SqlObjs ~-- Scope : CAS_OR_PRIMARY ~-- Object : P ~-- Dependencies
: <Detect> ~-- Description : <Please provide a description for this object> ~-- ~CREATE PROCEDURE sp_CreateLocaleInfo @_ciid int, @digest xml(CIDigest) AS ~BEGIN ~ ~ if (exists (select 1 from CI_ConfigurationItems where
CI_ID=@_ciid and CIType_ID=21)) ~ begin ~ --It is a DT, only create localized info for default local ~ ;WITH XMLNAMESPACES ~ (
~ N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest' as app ~ ) ~ insert into CI_LocalizedCIClientProperties( CI_ID, LocaleID, Title, [Description]) ~ ~ select ~
@_ciid, ~ 65535, ~ ISNULL(@digest.value('(/app:DeploymentType/app:Title)[1]', 'nvarchar(256)'), '') as Title, ~ ISNULL(@digest.value('(/app:DeploymentType/app:Description)[1]', 'nvarchar(2048)'),
'') as [Description] ~ ~ end ~ else ~ begin ~ ;WITH XMLNAMESPACES ~ ( ~ N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest'
as app ~ ) ~ insert into CI_LocalizedCIClientProperties( CI_ID, LocaleID, Title, [Description], Publisher, [Version], ReleaseDate, InfoUrl,InfoUrlText, PrivacyUrl, UserCategories, Tags, Icon ) ~ ~ select ~
@_ciid, ~ case ISNULL(cidigest.tc.value('(./@Language)[1]', 'nvarchar(10)'), '') when '' then 0 else ~ dbo.fnLShortNameToLCID(cidigest.tc.value('(./@Language)[1]',
'nvarchar(10)')) end as lcid, ~ ~ cidigest.tc.value('(app:Title)[1]', 'nvarchar(256)') as Title, ~ cidigest.tc.value('(app:Description)[1]', 'nvarchar(2048)') as [Description], ~ cidigest.tc.value('(app:Publisher)[1]',
'nvarchar(512)') as Publisher, ~ cidigest.tc.value('(app:Version)[1]', 'nvarchar(512)') as [Version], ~ cidigest.tc.value('(app:ReleaseDate)[1]', 'nvarchar(64)') as ReleaseDate, ~ ~ cidigest.tc.value('(app:InfoUrl)[1]',
'nvarchar(1024)') as InfoUrl, ~ cidigest.tc.value('(app:InfoUrlText)[1]', 'nvarchar(1024)') as InfoUrlText, ~ cidigest.tc.value('(app:PrivacyUrl)[1]', 'nvarchar(2048)') as PrivacyUrl, ~
cidigest.tc.query('app:UserCategories') as UserCategories, ~ cidigest.tc.query('app:Tags') as Tags, ~ ~ ( ~ select top 1 icons.tc.value('xs:base64Binary((./app:Data)[1])', 'varbinary(max)')
~ from @digest.nodes('/app:AppMgmtDigest/app:Resources/app:Icon') as icons(tc) ~ where ~ icons.tc.value('(./@Id)[1]', 'nvarchar(1024)') = cidigest.tc.value('(./app:Icon/@Id)[1]',
'nvarchar(1024)') ~ ) ~ as Icon ~ ~ from @digest.nodes('/app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info') as cidigest(tc) ~ where dbo.fnLShortNameToLCID(cidigest.tc.value('(./@Language)[1]',
'nvarchar(10)')) != 0; ~ ~ --insert default info. ~ declare @defaultlocal nvarchar(20); ~ ~ ~ ;WITH XMLNAMESPACES ~ ( ~ N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest'
as app ~ ) ~ select @defaultlocal = info.loc.value('(./@Language)[1]', 'nvarchar(20)') from @digest.nodes('/app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~
') as info(loc) ~ where ISNULL(info.loc.value('(./@Language)[1]', 'nvarchar(20)'), '') = ISNULL(@digest.value('(/app:AppMgmtDigest/app:Application/app:DisplayInfo/@DefaultLanguage)[1]', 'nvarchar(20)'), '');
~ ~ ~ if @defaultlocal is null ~ begin ~ ~ if exists (select 1 from @digest.nodes('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~ /app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~ ') as info(loc) ~
where info.loc.value('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest"; ~
(./@Language)[1]', 'nvarchar(20)') = 'en') ~ begin ~ set @defaultlocal = 'en'; ~ end else if exists (select 1 from @digest.nodes('declare
namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest"; ~
/app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~ ') as info(loc) ~ where info.loc.value('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~ (./@Language)[1]', 'nvarchar(20)') = 'en-US') ~ begin ~ set @defaultlocal = 'en-US'; ~
end else ~ begin ~ select @defaultlocal = lo from ( select top 1 ISNULL(info.loc.value('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~ (./@Language)[1]', 'nvarchar(20)'), '') as lo from @digest.nodes('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~ /app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~ ') as info(loc)) as tdb ~ end ~ end ~
~ if not exists (select 1 from CI_LocalizedCIClientProperties lp where
lp.CI_ID=@_ciid and lp.LocaleID=65535) ~ begin ~ insert into CI_LocalizedCIClientProperties ( CI_ID, LocaleID, Title, [Description], Publisher, [Version], ReleaseDate, InfoUrl, UserCategories, Tags,
Icon ) ~ select CI_ID, 65535, Title, [Description], Publisher, [Version], ReleaseDate, InfoUrl, UserCategories, Tags, Icon from ~ CI_LocalizedCIClientProperties lp where lp.LocaleID = dbo.fnLShortNameToLCID(@defaultlocal)
and lp.CI_ID = @_ciid ; ~ end; ~ ~ ~ --Expend categories. ~ ;WITH XMLNAMESPACES ~ ( ~ N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest' as app ~
) ~ insert into CI_LocalizedCIClientTags (CI_ID, LocaleID, Tag, [Type]) ~ select distinct tt.CI_ID, tt.LocaleID, RTRIM(LTRIM( cate.tag.value('(.)[1]', 'nvarchar(513)'))) as tag, ~ N'UserCategory' ~ from ~
CI_LocalizedCIClientProperties as tt cross apply tt.UserCategories.nodes('/app:UserCategories/app:Tag') as cate(tag) ~ where tt.CI_ID = @_ciid ; ~ ---Expend tags. ~ ;WITH XMLNAMESPACES ~ ( ~
N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest' as app ~ ) ~ insert into CI_LocalizedCIClientTags (CI_ID, LocaleID, Tag, [Type]) ~ select distinct tt.CI_ID, tt.LocaleID, cate.tag.value('(.)[1]',
'nvarchar(513)') as tag, ~ N'Tag' ~ from ~ CI_LocalizedCIClientProperties as tt cross apply tt.Tags.nodes('/app:Tags/app:Tag') as cate(tag) ~ where tt.CI_ID = @_ciid ; ~ end ~END ~ $$<Configuration
Manager Setup><01-03-2014 12:28:09.027-60><thread=3292 (0xCDC)>
*** [42000][701][Microsoft][SQL Server Native Client 11.0][SQL Server]There is insufficient system memory in resource pool 'internal' to run this query. : sp_CreateLocaleInfo $$<Configuration Manager Setup><01-03-2014 12:28:09.027-60><thread=3292
(0xCDC)>
ERROR: SQL Server error: [42000][701][Microsoft][SQL Server Native Client 11.0][SQL Server]There is insufficient system memory in resource pool 'internal' to run this query. : sp_CreateLocaleInfo $$<Configuration Manager Setup><01-03-2014 12:28:09.027-60><thread=3292
(0xCDC)>
Failed to execute sql command -- ~-- Name : sp_CreateLocaleInfo ~-- Definition : SqlObjs ~-- Scope : CAS_OR_PRIMARY ~-- Object
: P ~-- Dependencies : <Detect> ~-- Description : <Please provide a description for this object> ~-- ~CREATE PROCEDURE sp_CreateLocaleInfo @_ciid int, @digest xml(CIDigest) AS ~BEGIN ~ ~ if (exists (select 1 from CI_ConfigurationItems
where CI_ID=@_ciid and CIType_ID=21)) ~ begin ~ --It is a DT, only create localized info for default local ~ ;WITH XMLNAMESPACES ~ (
~ N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest' as app ~ ) ~ insert into CI_LocalizedCIClientProperties( CI_ID, LocaleID, Title, [Description]) ~ ~ select ~
@_ciid, ~ 65535, ~ ISNULL(@digest.value('(/app:DeploymentType/app:Title)[1]', 'nvarchar(256)'), '') as Title, ~ ISNULL(@digest.value('(/app:DeploymentType/app:Description)[1]', 'nvarchar(2048)'),
'') as [Description] ~ ~ end ~ else ~ begin ~ ;WITH XMLNAMESPACES ~ ( ~ N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest'
as app ~ ) ~ insert into CI_LocalizedCIClientProperties( CI_ID, LocaleID, Title, [Description], Publisher, [Version], ReleaseDate, InfoUrl,InfoUrlText, PrivacyUrl, UserCategories, Tags, Icon ) ~ ~ select ~
@_ciid, ~ case ISNULL(cidigest.tc.value('(./@Language)[1]', 'nvarchar(10)'), '') when '' then 0 else ~ dbo.fnLShortNameToLCID(cidigest.tc.value('(./@Language)[1]',
'nvarchar(10)')) end as lcid, ~ ~ cidigest.tc.value('(app:Title)[1]', 'nvarchar(256)') as Title, ~ cidigest.tc.value('(app:Description)[1]', 'nvarchar(2048)') as [Description], ~ cidigest.tc.value('(app:Publisher)[1]',
'nvarchar(512)') as Publisher, ~ cidigest.tc.value('(app:Version)[1]', 'nvarchar(512)') as [Version], ~ cidigest.tc.value('(app:ReleaseDate)[1]', 'nvarchar(64)') as ReleaseDate, ~ ~ cidigest.tc.value('(app:InfoUrl)[1]',
'nvarchar(1024)') as InfoUrl, ~ cidigest.tc.value('(app:InfoUrlText)[1]', 'nvarchar(1024)') as InfoUrlText, ~ cidigest.tc.value('(app:PrivacyUrl)[1]', 'nvarchar(2048)') as PrivacyUrl, ~
cidigest.tc.query('app:UserCategories') as UserCategories, ~ cidigest.tc.query('app:Tags') as Tags, ~ ~ ( ~ select top 1 icons.tc.value('xs:base64Binary((./app:Data)[1])', 'varbinary(max)')
~ from @digest.nodes('/app:AppMgmtDigest/app:Resources/app:Icon') as icons(tc) ~ where ~ icons.tc.value('(./@Id)[1]', 'nvarchar(1024)') = cidigest.tc.value('(./app:Icon/@Id)[1]',
'nvarchar(1024)') ~ ) ~ as Icon ~ ~ from @digest.nodes('/app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info') as cidigest(tc) ~ where dbo.fnLShortNameToLCID(cidigest.tc.value('(./@Language)[1]',
'nvarchar(10)')) != 0; ~ ~ --insert default info. ~ declare @defaultlocal nvarchar(20); ~ ~ ~ ;WITH XMLNAMESPACES ~ ( ~ N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest'
as app ~ ) ~ select @defaultlocal = info.loc.value('(./@Language)[1]', 'nvarchar(20)') from @digest.nodes('/app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~
') as info(loc) ~ where ISNULL(info.loc.value('(./@Language)[1]', 'nvarchar(20)'), '') = ISNULL(@digest.value('(/app:AppMgmtDigest/app:Application/app:DisplayInfo/@DefaultLanguage)[1]', 'nvarchar(20)'), '');
~ ~ ~ if @defaultlocal is null ~ begin ~ ~ if exists (select 1 from @digest.nodes('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~ /app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~ ') as info(loc) ~
where info.loc.value('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest"; ~
(./@Language)[1]', 'nvarchar(20)') = 'en') ~ begin ~ set @defaultlocal = 'en'; ~ end else if exists (select 1 from @digest.nodes('declare
namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest"; ~
/app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~ ') as info(loc) ~ where info.loc.value('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~ (./@Language)[1]', 'nvarchar(20)') = 'en-US') ~ begin ~ set @defaultlocal = 'en-US'; ~
end else ~ begin ~ select @defaultlocal = lo from ( select top 1 ISNULL(info.loc.value('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~ (./@Language)[1]', 'nvarchar(20)'), '') as lo from @digest.nodes('declare namespace app="http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest";
~ /app:AppMgmtDigest/app:Application/app:DisplayInfo/app:Info ~ ') as info(loc)) as tdb ~ end ~ end ~
~ if not exists (select 1 from CI_LocalizedCIClientProperties lp where
lp.CI_ID=@_ciid and lp.LocaleID=65535) ~ begin ~ insert into CI_LocalizedCIClientProperties ( CI_ID, LocaleID, Title, [Description], Publisher, [Version], ReleaseDate, InfoUrl, UserCategories, Tags,
Icon ) ~ select CI_ID, 65535, Title, [Description], Publisher, [Version], ReleaseDate, InfoUrl, UserCategories, Tags, Icon from ~ CI_LocalizedCIClientProperties lp where lp.LocaleID = dbo.fnLShortNameToLCID(@defaultlocal)
and lp.CI_ID = @_ciid ; ~ end; ~ ~ ~ --Expend categories. ~ ;WITH XMLNAMESPACES ~ ( ~ N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest' as app ~
) ~ insert into CI_LocalizedCIClientTags (CI_ID, LocaleID, Tag, [Type]) ~ select distinct tt.CI_ID, tt.LocaleID, RTRIM(LTRIM( cate.tag.value('(.)[1]', 'nvarchar(513)'))) as tag, ~ N'UserCategory' ~ from ~
CI_LocalizedCIClientProperties as tt cross apply tt.UserCategories.nodes('/app:UserCategories/app:Tag') as cate(tag) ~ where tt.CI_ID = @_ciid ; ~ ---Expend tags. ~ ;WITH XMLNAMESPACES ~ ( ~
N'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest' as app ~ ) ~ insert into CI_LocalizedCIClientTags (CI_ID, LocaleID, Tag, [Type]) ~ select distinct tt.CI_ID, tt.LocaleID, cate.tag.value('(.)[1]',
'nvarchar(513)') as tag, ~ N'Tag' ~ from ~ CI_LocalizedCIClientProperties as tt cross apply tt.Tags.nodes('/app:Tags/app:Tag') as cate(tag) ~ where tt.CI_ID = @_ciid ; ~ end ~END ~~
$$<Configuration Manager Setup><01-03-2014 12:28:09.027-60><thread=3292 (0xCDC)>
ERROR: Failed to execute SQL Server script: Create SQL object sp_createlocaleinfo~ $$<Configuration Manager Setup><01-03-2014 12:28:09.027-60><thread=3292 (0xCDC)>
ERROR: SQL Server error: <> $$<Configuration Manager Setup><01-03-2014 12:28:09.027-60><thread=3292 (0xCDC)>
~~===================== Completed Configuration Manager 2012 Server Setup ===================== $$<Configuration Manager Setup><01-03-2014 12:28:09.136-60><thread=3292 (0xCDC)>
CarolChiYes I found your guide and followed it.
Stuck after 16 hours at LU_SoftwareList
INFO: Extracted file D:\Program Files\Microsoft Configuration Manager\AI\LU_CAL_ProductList.csv $$<Configuration Manager Setup><01-04-2014 17:27:57.606-60><thread=520 (0x208)>
INFO: Extracted file D:\Program Files\Microsoft Configuration Manager\AI\watermark.txt $$<Configuration Manager Setup><01-04-2014 17:27:57.606-60><thread=520 (0x208)>
INFO: Successfully expanded CSV files $$<Configuration Manager Setup><01-04-2014 17:27:57.606-60><thread=520 (0x208)>
INFO: Starting data import data to table: LU_LicensedProduct $$<Configuration Manager Setup><01-04-2014 17:27:57.638-60><thread=520 (0x208)>
INFO: Successfully imported data to table LU_LicensedProduct $$<Configuration Manager Setup><01-04-2014 17:28:01.717-60><thread=520 (0x208)>
INFO: Starting data import data to table: LU_Category $$<Configuration Manager Setup><01-04-2014 17:28:01.717-60><thread=520 (0x208)>
INFO: Successfully imported data to table LU_Category $$<Configuration Manager Setup><01-04-2014 17:28:01.764-60><thread=520 (0x208)>
INFO: Starting data import data to table: LU_SoftwareList $$<Configuration Manager Setup><01-04-2014 17:28:01.764-60><thread=520 (0x208)>
CarolChi -
SCCM 2012 R2 Upgrade Error - Fails on SQL
Greetings,
I am currently working to upgrade our current SCCM 2012 SP1 CU3 servers to SCCM 2012 R2. i have ran all the pre-checks and all comes through without error. when doing the upgrade the following errors appear and as such it will not move forward.
can anyone please assist on this one? I have searched and searched but not found anything that will point me towards a resolve.
Thanks for the help and i really hope this will be an easy fix
JAKStill looking for any sort of assistance on this one. not sure if the above capture was enough to give any insight so i am attaching the complete log. was going through multiple windows so copy past was not working, please see below...
TestDBUpgrade log:
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:01:16 PM 3080 (0x0C08)
INFO: Running SQL Server test query. Configuration Manager Setup 04/02/2014 3:01:16 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA MASTER, Type: Secure Configuration Manager Setup 04/02/2014 3:01:16 PM 3080 (0x0C08)
INFO: SQL Server Test query succeeded. Configuration Manager Setup 04/02/2014 3:01:16 PM 3080 (0x0C08)
ERROR: Failed to get Service Pack version for SQL Server <SITE.DB.CA>. Configuration Manager Setup 04/02/2014 3:01:16 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Unsecure Configuration Manager Setup 04/02/2014 3:01:17 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:01:17 PM 3080 (0x0C08)
INFO: The size of the existing site database is 5.0 gigabytes. Setup may take some time to upgrade the database. Configuration Manager Setup 04/02/2014 3:01:17 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: SiteCode for the specified database is CS1 Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: Starting database upgrade test using CM_CS1 database, on the SITE.DB.CA server. Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: Testing database this SiteNumber: 0. Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: Testing database setup type: 8, top level: 1. Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: Site server of the Database is SITE.SERVER.CA Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: Site code of the Database is CS1 Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: Build number from the database is 5.00.7804.1000 Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: Upgrading SQL Server database... Configuration Manager Setup 04/02/2014 3:01:33 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:01:33 PM 3080 (0x0C08)
INFO: The database compatibility level for CM_CS1 is 110 Configuration Manager Setup 04/02/2014 3:01:33 PM 3080 (0x0C08)
INFO: Set Database options: starting... Configuration Manager Setup 04/02/2014 3:01:33 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA MASTER, Type: Secure Configuration Manager Setup 04/02/2014 3:01:33 PM 3080 (0x0C08)
INFO: Database options: connected... Configuration Manager Setup 04/02/2014 3:01:33 PM 3080 (0x0C08)
INFO: Successfully set database to SINGLE_USER mode Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set database owner to sysadmin. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set TRUSTWORTHY ON Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully configured [clr enabled]. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set Recursive triggers to CM_CS1. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set checkpoint truncation. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Configuring SQL Server service broker... Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully enabled service broker. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set HONOR_BROKER_PRIORITY. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set CHANGE_TRACKING=ON. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set ALLOW_SNAPSHOT_ISOLATION ON. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set READ_COMMITTED_SNAPSHOT ON. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully configured Max text replication size. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set default settings Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully enabled MULTI_USER Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Set Database options: end. Configuration Manager Setup 04/02/2014 3:01:37 PM 3080 (0x0C08)
INFO: Database options set. Configuration Manager Setup 04/02/2014 3:01:37 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating SQL Server database roles and schemas. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_MP. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_MCS. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_DMP. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_siteprovider. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_siteserver. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_AMTSP. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_AIUS. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_AITool. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_extract. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_WebPortal. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_EnrollSvr. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_DViewAccess. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_SUP. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_CRP. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsschm_users. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_DmpConnector. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_HMSUser. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbuser_ReadOnly. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbuser_ReadWrite. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbuser_ReportSchema. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Beginning SQL Server script execution. Configuration Manager Setup 04/02/2014 3:01:51 PM 3080 (0x0C08)
INFO: Executing PreUpgrade Cleanup scripts. Configuration Manager Setup 04/02/2014 3:01:51 PM 3080 (0x0C08)
INFO: Executing DropForeignKeys Configuration Manager Setup 04/02/2014 3:02:13 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:02:23 PM 3080 (0x0C08)
INFO: Executing DropAllCLRObjects Configuration Manager Setup 04/02/2014 3:02:23 PM 3080 (0x0C08)
DropAllCLRObjects Configuration Manager Setup 04/02/2014 3:02:23 PM 3080 (0x0C08)
INFO: Executing DropAllOjects for Service Portal Configuration Manager Setup 04/02/2014 3:02:38 PM 3080 (0x0C08)
INFO: Drop SqlObjs Round: 0 start. Configuration Manager Setup 04/02/2014 3:02:38 PM 3080 (0x0C08)
INFO: Drop SqlObjs Round: 0 end, success: 52, Failed: 0 Configuration Manager Setup 04/02/2014 3:02:43 PM 3080 (0x0C08)
INFO: Executing DropAllOjects Configuration Manager Setup 04/02/2014 3:02:43 PM 3080 (0x0C08)
INFO: Drop SqlObjs Round: 0 start. Configuration Manager Setup 04/02/2014 3:02:43 PM 3080 (0x0C08)
INFO: Drop SqlObj: alertvariablechangeinitiatorservice Configuration Manager Setup 04/02/2014 3:03:25 PM 3080 (0x0C08)
INFO: Drop SqlObj: alertvariablechangetargetservice Configuration Manager Setup 04/02/2014 3:03:26 PM 3080 (0x0C08)
INFO: DROP MESSAGE TYPE: <declare @VarName nvarchar(128) ~declare @VarSql nvarchar(400) ~select @VarName = [name] from sys.service_message_types where lower([name]) = lower(N'alertvariablechangemessage') ~if @VarName IS NOT NULL ~begin ~ set
@VarSql = N'DROP MESSAGE TYPE ' + QUOTENAME(@VarName, N'[') ~ execute(@VarSql) ~end > Configuration Manager Setup 04/02/2014 3:03:26 PM 3080 (0x0C08)
INFO: DROP MESSAGE TYPE: <declare @VarName nvarchar(128) ~declare @VarSql nvarchar(400) ~select @VarName = [name] from sys.service_message_types where lower([name]) = lower(N'alertvariablechangeackmessage') ~if @VarName IS NOT NULL ~begin ~ set
@VarSql = N'DROP MESSAGE TYPE ' + QUOTENAME(@VarName, N'[') ~ execute(@VarSql) ~end > Configuration Manager Setup 04/02/2014 3:03:26 PM 3080 (0x0C08)
INFO: Drop SqlObjs Round: 0 end, success: 3049, Failed: 0 Configuration Manager Setup 04/02/2014 3:03:34 PM 3080 (0x0C08)
INFO: Executing UnBindXMLSchemas Configuration Manager Setup 04/02/2014 3:03:34 PM 3080 (0x0C08)
INFO: Dropping objects from csaObject Configuration Manager Setup 04/02/2014 3:03:35 PM 3080 (0x0C08)
INFO: Executing the preupgrade SQL Server scripts. Configuration Manager Setup 04/02/2014 3:03:37 PM 3080 (0x0C08)
INFO: Upgrade cleanup end Configuration Manager Setup 04/02/2014 3:03:56 PM 3080 (0x0C08)
INFO: Creating SQL Server tables for the Configuration Manager database... Configuration Manager Setup 04/02/2014 3:03:56 PM 3080 (0x0C08)
*** create table dbo.Add_Remove_Programs_64_DATA (MachineID int NOT NULL ,InstanceKey int NOT NULL ,RevisionID int NOT NULL ,AgentID int NULL ,TimeKey datetime NOT NULL ,rowversion timestamp NOT NULL ,ProdID00 nvarchar(255) NULL
,DisplayName00 nvarchar(255) NULL ,InstallDate00 nvarchar(255) NULL ,Publisher00 nvarchar(255) NULL ,Version00 nvarchar(255) NULL ) Configuration Manager Setup 04/02/2014 3:03:58 PM 3080 (0x0C08)
*** [42S01][2714][Microsoft][SQL Server Native Client 11.0][SQL Server]There is already an object named 'Add_Remove_Programs_64_DATA' in the database. Configuration Manager Setup 04/02/2014 3:03:58 PM 3080 (0x0C08)
ERROR: SQL Server error: [42S01][2714][Microsoft][SQL Server Native Client 11.0][SQL Server]There is already an object named 'Add_Remove_Programs_64_DATA' in the database. Configuration Manager Setup 04/02/2014 3:03:58 PM 3080 (0x0C08)
CSqlSchema::CreateTable - error in CSql->Execute() create table dbo.Add_Remove_Programs_64_DATA (MachineID int NOT NULL ,InstanceKey int NOT NULL ,RevisionID int NOT NULL ,AgentID int NULL ,TimeKey datetime NOT NULL ,rowversion
timestamp NOT NULL ,ProdID00 nvarchar(255) NULL ,DisplayName00 nvarchar(255) NULL ,InstallDate00 nvarchar(255) NULL ,Publisher00 nvarchar(255) NULL ,Version00 nvarchar(255) NULL ) Configuration Manager Setup 04/02/2014 3:03:58 PM 3080 (0x0C08)
ERROR: Failed to execute SQL Server script: Creating table Add_Remove_Programs_64_DATA Configuration Manager Setup 04/02/2014 3:03:58 PM 3080 (0x0C08)
ERROR: SQL Server error: <> Configuration Manager Setup 04/02/2014 3:03:58 PM 3080 (0x0C08)
<02-04-2014 15:04:09> Failed to create process of SetupWpf.exe. 01/01/1601 12:00:00 AM 1993431915 (0x76D15B6B)
JAK
Maybe you are looking for
-
How do I call a SAP RFC from an Oracle Form using webutils CLIENT_OLE2?
Hi guys, Your help on this problem would be greatly appreciated. We have an older forms 6i application which we are currently updating to 10g (which is a pain itself... but that's a different story.) which currently uses unssupported c++ routines to
-
I converted my resume from PDF to word, now how do I edit the spacing as I add information?
This is not functioning like a word file. I upgraded because I needed to add a couple dates to my resume, as well as one job, but when I did the formatting and margins are funky and I cannot add portions to the document. What do I do? Beth
-
Just downloaded the trial version....downloaded fine but when trying to launch, a prompt came up saying could not open as computer did not meet minimum operating requirements...but it does. I'm running Vista with sufficient processing speed, RAM and
-
10.6.7 stuck in 32 bit mode...tried everything
Setup: running a 2.8 Ghz Quad Core Intel Xeon, 12GB ram when I open system prefs/accounts....it says "accounts (32 bit)" as a header my co-workers running same set up do not have this I tried forcing the 64 bit mode: To select the 64-bit kernel for t
-
Data Dictionary Info for Constraints
Hi, I want to get Information from the data dictionary about foreign key constraints. I want to get information about all constraints which REFER to a certain table and column, so I want to get the table/colum which is the parent in a foreign_key rea