SCCM Query to merge two different collections to one

Hi Team,
I wanted to merge two different collections e.g. NY and LA collection in one single all US Collection. I wanted to see all PCs under US collection. NY and LA computers are manually updated in collection i cannt use there query.
Waiting for your response.

If you already have to two collections you can do something like this
select
SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client
from SMS_R_System where SMS_R_System.ResourceId in (select ResourceId from
SMS_CM_RES_COLL_XXXXXXX) or SMS_R_System.ResourceId in (select ResourceId from
SMS_CM_RES_COLL_XXXXXXX)
John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

Similar Messages

How do you merge two different users on one computer?

I created a user account on my computer, then when I used Migration Assistant to transfer some of the files off my old computer onto my new MacBook Air it transferred them into a new user account. How do I merge the two different users? They are both me.

You can't "merge" users, you have to transfer the files using intermediate steps to deal with Permissions issues.
You found out first hand that you should use Setup Assistant, rather than Migration Assistant to perform the action that is now causing trouble, and time.
1) Log in to the A account.
2) Locate all the files you want to move. Move them to /Users/A/Public. Note: Don't move any System-created top-level folders, like Documents, Pictures, Music, Movies, etc. Just move their contents.
3) Log in to the B account.
4) Navigate with Finder to /Users/A/Public. Drag the files to the Desktop. This will make new copies of them that will have the correct permissions for User B.
5) Put the new copies of the files away in the appropriate places in B's home folder.
6) Delete the A user account if it is no longer needed.
Doing it this way will ensure that there are no permissions headaches with the files after they are moved.
Also, make sure that you BACK UP all of your data before starting.
Credit: to user Kiraly for the process.

Is it possible to merge two different FONT in one?

Hi all,
I am wondering if I could merge the glyphs from two different FONT and create a new embedded FONT out of it.
Use case: Bilingual (Chinese-English) website http://www.mannerstoday.com/cn/aboutus
On this page, I have the following text:
"西方顾问联手国际经验丰富的西方合作伙伴，或特别礼仪专业领域高水平的专才，例如Eric Paris，法国知名专业美发化妆大师，Flo Prestige，将在中国设立机构的法国最著名餐厅。"
Currently, the appearance of the English texts "Eric Paris" and "Flo Prestige" is really ugly. I would like to get the glyphs for the Chinese Characters from a first FONT and the English letters from a second one.
Would that be possible?
Thanks all for your kind help!
Thierry DE DOBBELEER
http://www.new-sense.org/

You can have as many beans in an EJB deployment descriptor as you like - i think, i have not run into a limit yet...
<ejb-jar>
<enterprise-beans>
<session>
<description>Session Bean ( Stateless )</description>
<display-name>BEanOne</display-name>
etc...
</session>
<session>
<description>Session Bean ( Stateless )</description>
<display-name>BeanTwo</display-name>
etc...
</session>
</enterprise-beans>
</ejb-jar>
m

Automatic Deployment Rule - One ADR for Two Different Collection for Two Different time Intervals

I have a scenario where two collection of Windows 8.1 is made based on geographical location. One collection is for all the windows 8.1 machines in India and one collection is for all windows 8.1 machines in US. Now I have created one ADR to be deployed
to the Collection for Machines in India with a schedule.
My requirement is that can i use the same ADR for those two collection with different schedule. Say I want ADR to be deployed in India at say 10:PM IST and for US collection at say 10:00 PM PST.
Can I use one ADR with two different schedule and can be deployed to two different collection. Any help will be greatly appreciated.

Couple of "bits" to help you one your patch automation quest:
A ADR is very much a 1:1:1 rule. It creates (or updates) ONE update group, deploys it to ONE collection, and you can provide ONE schedule. While you are more than capable of flipping said deployment time to use local time instead of UTC, in general
it's a very simple set of rules that are dogmatically run.
That said because of the "include" feature of collections it's not that hard to setup a good/robust patching pattern. What I recommend doing is building an ADR for each variance of deployment of patches or enforcement time. for example,
my ADRs look something like this:
Software Updates - Zero day enforced
Software Updates - Critical and Security 1 month enforced
Software Updates - Critical and Security 1 month no reboots
Exact terminology is up to you of course, but I find a good descriptive ADR name saves a lot of confusion. For each ADR I create an identical collection. From there I can use existing collections and a simple "include collection" rule
to bundle things up and make them part of the patching schedule of my choice. Anyone can now go into my "software update" folder, look at my collections, and know exactly what gets patched by what deadline.
Finally, don't be afraid to look into maintenance windows to trim down ADR count. Making a deployment available for a month before it goes enforced, then setting up groups of maintenance windows (one for each Friday of the week for example) can also
accomplish a similar goal by having machines auto-patch during their week but you only using one ADR.
So by having two "types" of collections to manage your patching (one to assign a ADR built by deployment deadlines, the other for exact update windows) you should be able to group most your workstations into a decent patch scheudle without being
too excessive about creating a billion ADRs.

How do I merge two different libraries, linked to one account? They're on two different computers but I want them to be on one

How do I merge two different libraries, linked to one account? They're on two different computers but I want them to be on one

This should do the trick
Home Sharing Learn More
http://support.apple.com/kb/HT201976
Best of Luck

Execute the same query twice, get two different results

I have a query that returns two different results:
Oracle Version : 10.2.0.1.0
I am running the following query on the Oracle server in SQL*Plus Worksheet.
SELECT COUNT(*)
FROM AEJOURNAL_S1
WHERE CHAR_TIME BETWEEN TO_DATE('12-AUG-10 01:17:39 PM','DD-MON-YY HH:MI:SS AM') AND
TO_DATE('13-AUG-10 14:17:34','DD-MON-YY HH24:MI:SS')
AND DESC2 LIKE '%'
AND DESC1 LIKE '%'
AND DESC2 LIKE '%'
AND ETYPE LIKE '%'
AND MODULE LIKE '%'
AND LEVELL = '11-WARNING'
ORDER BY ORDD DESC;
The very first time the query is run, it will return a count of 259. The next time the query is run, lets say, 10 seconds later, it will return a count of 260. The above query is exemplary of the kind of thing I'm trying to do. It seems like the more fields filtered against '%', the more random the count return becomes. Sometime you have to execute the query three or four times before it levels out to a consistent number.
I'm using '%' as the default for various fields, because this was the easiest thing to do to support a data-driven Web interface. Maybe I have to 'dynamically' build the entire where clause, instead of just parameterizing the elements and having default '%'. Anyway, to eliminate the web interface for the purpose of troubleshooting the above query was run directly on the Oracle server.
This query runs against a view. The view does a transpose of data from a table.
Below is the view AEJOURNAL_S1
SELECT
CHAR_TIME,
CHAR_INST,
BATCH_ID,
MIN(DECODE(CHAR_ID,6543,CHAR_VALUE)) AS ORDD,
MIN(DECODE(CHAR_ID,6528,CHAR_VALUE)) AS AREAA,
MIN(DECODE(CHAR_ID,6529,CHAR_VALUE)) AS ATT,
COALESCE(MIN(DECODE(CHAR_ID,6534,CHAR_VALUE)),'N/A') AS CATAGORY,
MIN(DECODE(CHAR_ID,6535,CHAR_VALUE)) AS DESC1,
MIN(DECODE(CHAR_ID,6536,CHAR_VALUE)) AS DESC2,
MIN(DECODE(CHAR_ID,6537,CHAR_VALUE)) AS ETYPE,
MIN(DECODE(CHAR_ID,6538,CHAR_VALUE)) AS LEVELL,
MIN(DECODE(CHAR_ID,6539,CHAR_VALUE)) AS MODULE,
MIN(DECODE(CHAR_ID,6540,CHAR_VALUE)) AS MODULE_DESCRIPTION,
MIN(DECODE(CHAR_ID,6541,CHAR_VALUE)) AS NODE,
MIN(DECODE(CHAR_ID,6542,CHAR_VALUE)) AS STATE,
MIN(DECODE(CHAR_ID,6533,CHAR_VALUE)) AS UNIT
FROM CHAR_BATCH_DATA
WHERE subbatch_id = 1774
GROUP BY CHAR_TIME, CHAR_INST, BATCH_ID
So... why does the query omit rows on the first execution? Is this some sort of optimizer issue. Do I need to rebuild indexes? I looked at the indexes, they are all valid.
Thanks for looking,
Dan

user2188367 wrote:
I have a query that returns two different results:
Oracle Version : 10.2.0.1.0
I am running the following query on the Oracle server in SQL*Plus Worksheet.
SELECT COUNT(*)
FROM AEJOURNAL_S1
WHERE CHAR_TIME BETWEEN TO_DATE('12-AUG-10 01:17:39 PM','DD-MON-YY HH:MI:SS AM') AND
TO_DATE('13-AUG-10 14:17:34','DD-MON-YY HH24:MI:SS')
AND DESC2 LIKE '%'
AND DESC1 LIKE '%'
AND DESC2 LIKE '%'
AND ETYPE LIKE '%'
AND MODULE LIKE '%'
AND LEVELL = '11-WARNING'
ORDER BY ORDD DESC;
The very first time the query is run, it will return a count of 259. The next time the query is run, lets say, 10 seconds later, it will return a count of 260. The above query is exemplary of the kind of thing I'm trying to do. It seems like the more fields filtered against '%', the more random the count return becomes. Sometime you have to execute the query three or four times before it levels out to a consistent number.
I'm using '%' as the default for various fields, because this was the easiest thing to do to support a data-driven Web interface. Maybe I have to 'dynamically' build the entire where clause, instead of just parameterizing the elements and having default '%'. Anyway, to eliminate the web interface for the purpose of troubleshooting the above query was run directly on the Oracle server.
This query runs against a view. The view does a transpose of data from a table.
Below is the view AEJOURNAL_S1
SELECT
CHAR_TIME,
CHAR_INST,
BATCH_ID,
MIN(DECODE(CHAR_ID,6543,CHAR_VALUE)) AS ORDD,
MIN(DECODE(CHAR_ID,6528,CHAR_VALUE)) AS AREAA,
MIN(DECODE(CHAR_ID,6529,CHAR_VALUE)) AS ATT,
COALESCE(MIN(DECODE(CHAR_ID,6534,CHAR_VALUE)),'N/A') AS CATAGORY,
MIN(DECODE(CHAR_ID,6535,CHAR_VALUE)) AS DESC1,
MIN(DECODE(CHAR_ID,6536,CHAR_VALUE)) AS DESC2,
MIN(DECODE(CHAR_ID,6537,CHAR_VALUE)) AS ETYPE,
MIN(DECODE(CHAR_ID,6538,CHAR_VALUE)) AS LEVELL,
MIN(DECODE(CHAR_ID,6539,CHAR_VALUE)) AS MODULE,
MIN(DECODE(CHAR_ID,6540,CHAR_VALUE)) AS MODULE_DESCRIPTION,
MIN(DECODE(CHAR_ID,6541,CHAR_VALUE)) AS NODE,
MIN(DECODE(CHAR_ID,6542,CHAR_VALUE)) AS STATE,
MIN(DECODE(CHAR_ID,6533,CHAR_VALUE)) AS UNIT
FROM CHAR_BATCH_DATA
WHERE subbatch_id = 1774
GROUP BY CHAR_TIME, CHAR_INST, BATCH_ID
So... why does the query omit rows on the first execution? Is this some sort of optimizer issue. Do I need to rebuild indexes? I looked at the indexes, they are all valid.
Thanks for looking,
DanIn fact you the first time you ran the query the data has been retrived from disk to memory , in the second time the data is already in memory so the respnse time should be faster ,but if you chagne any condition or column or letter case the optimizer will do the first step (data will be retrived from disk to memory )

Merging two different R/3 clients in to One...

Hello All,
I have a requirement in which i have to merge two different SAP R/3 clients in to one, which further connected to BI system for reporting, earlier reporting was done from two different clients, after merge it has to be done with one system only.
need help from someone who has done this before.
Please provide the steps to do this task.
Thanks in Advance.
Rgds,
Zakir

I did it couple of years back -
1. Identify common BW objects - Master date Cubes etc
2. Identify the objects only relevant to client which is going away - need to check these in BW for continuity purposes
3. Indentify datasources - common for both the clients (same datasource in both the clients)
4. If same datasource, have a look at the enhancements - as enhancements may vary
5. Generic datasources
6. special attention to datasources of client going away as those shall be inlcuded in client staying
7. authorisation shall come later
8 most of the reporting can be handled by multiproviders
Hope it helps
Vikash

How to merge two different images in photoshop?

I am new here. I am starting to learn photoshop.How to merge two different images in photoshop? Please guide me. Thankyou.
http://www.nissiinfotech.com/

SPAM

How to merge two storage drives into one partition-help

THis is on an iPad-Please excuse for any typos
I Am working on a project of restoring a macbook pro from old parts that I found. It works!!! But the HDD that i salvadged is ancient and gets about .15 MBPS. Not good. Its an apple certified and apple branded toshiba HDD-500G at 5400RPM. Yeah. *****
I am considering buying a new hard drive as a 480GB SSD, and using OWC's Data doubler, adding a second HDD, for all the photos and vids i will be collecting through my work in video and photo. I am considering getting an SSHD (SSD+HDD in an SSD form factor) and using this as the second drive. its not much more expensive (like 10$ more) and itgetsme semi-SSD like performance on a mass scale of storage.
HOw can I combine these two drives into ONE partition? 480GB will take awhile to fill up, but this is a future proof wall to use.
I Will eventually invest in an external storage option (2-3 HDDS in one caddy for backups and storing 1080p video all under one roof. depends if the board im using actually has thunderbolt or usb that is fast enough-because of the crappy hdd i cant get it to boot into an OS or go through usb recovery without it freezing. I ahve tried re-applying thermal paste, still doesnt help)
HOw can i easily partition these two drives into one?
also, my friend needs a new HDD because bootup times in his macbook pro are at like 2 mins+ and hes running Core 2 Duo, with 8 G ram and 10.9 (Mav) should i recommend an SSHD or an ssd. (He doesnt want an HDD, hes had bad 'voodoo' with em'. Thanks!

nithya_ram wrote:
Give me d source code for merging two img files into one img file\\
If you want someone to do your work for you, simply pay someone. However, if you have a question about code you're currently working on, feel free to ask a specific question here on the forum.

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

How to sort two different hierarchies in one dimension

Does anyone know of a way to sort two different hierarchies in one dimension and still make drilling work correctly? We have two hierarchies in our item dimension; one called category and the other origin. Simplified, it looks like this:
CATEGORY
Hardware (100)
..PCs (100.100)
....PC 1
....PC 2
....PC 3
..Monitors (100.200)
....Monitor 1
....Monitor 2
....Monitor 3
Software (200)
..Big (200.100)
....ERP package
....CRM package
..Small (200.200)
....Solitaire
....Mine Sweeper
ORIGIN
Vendor A (10)
..Site A1 (10.10)
....ERP package
..Site A2 (10.20)
....PC 1
....Monitor 3
Vendor B (20)
..Site B1 (20.10)
....PC 2
....PC 3
....Monitor 1
....Monitor 2
....Solitaire
....Mine Sweeper
..Site B2 (20.20)
....CRM package
We have numeric codes at each level above item which I represents the sort order (the number in parentheses at each level), and the items themselves should be sorted according to item number. I have implemented this (level code/item number) as an attribute in AWM making this the default sort order. However, as item is the lowest level in each hierarchy, I have only been able to list the items under the correct level in one hierarchy. As soon as I drill using the other hierarchy, the levels above item are sorted correctly, but the items appear at very odd places...
The AWM documentation states that if default order is not selected on any attribute, hierarchies are sorted in the order they are created. Is there a way to control this order?
Any input will be greatly appreciated!

Hi,
thank you for your answer. Yes, now I also find the class CL_SALV_WD_MULTI_CELL_EDITOR which could be used to set different UIE in one cell. But it is quite limited, just the following UIE could be used
- LinkToAction
- LinkToURL
- FileDownload
- Button
- ToggleButton
best regards,
Wenwen

I would like the share an iTunes library between two different accounts on one Mac. How do I do this?

iTunes no longer works properly (aka at all) while using one of the user accounts set up on my iMac. It does, however, work when logging in under another user account on the same iMac. (if any of you can help me solve this issue that would be perfect). If there is no solution can anyone help with my request to share an iTunes library between two different accounts on one Mac. How do I do this?

jc_hering wrote:
that works for anything he purchases after he creates the new account. What about his current music that currently resides in my itunes library? How can I get his current music out of my library into his new account/library?? Thanks..
Copy it to his computer into his iTunes library and authorize his computer with the iTunes account used to purchase them..
You cannot tranfser items from one iTunes account to another. Purchased items remain part of the iTunes account is was purchased with.
iTunes account - used to purchase items
iTunes library - where purchases (and CD RIPs) go on the computer

How do you set up two different ipads on one computer ?

I purchased a new ipad for my wife and want to get her started but we both use one imac as our desktop system. How do you set up two different uses on one computer.
Thanks,
Dave

Other options not covered in the article:
1) You can plug both in under the same computer username and same iTunes Apple ID and give each device it's own name. You should be able to manage them as separate devices with different media, apps and screen layouts. All of your media would be in a common pool, though.
2) Under one computer username, you can login and logout of two different iTunes Apple IDs. This option is cleaner with two computer usernames but it can be done with one.

How can I use two differant iphones on one itunes

I can i use two differant iphones on one itunes, and keep the content seperate?

You can sync as many iphones/ipod/ipads as you like to one computer.
Each is different and is recognized as such

HT204053 Can you merge two Apple IDs into one? It was a common issue caused by the iPhone 4 and has been corrected, but transferring purchases in iTunes is a pain with two IDs.

For a brief time when iPhone 4, iOS 4 came out, many of us ended up with two Apple IDs. I want to know if anyone can please provide me with simple step-by-step instructions on merging two Apple IDs into one? It would make transferring purchases on iTunes much easier and reliable. I realize i desperately need an iOS update, but i had no laptop for over two years! I'm posting a cry for help on that in another community. Thank you all.

No,
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

SCCM Query to merge two different collections to one

Similar Messages

Maybe you are looking for