SCCM - software update stuck on one of the machines.
HI All,
There is an update 2912390 that is in an stuck state on one of the user machine.Can someone share the posisble steps and ways to get rid of this update either it can be installation or removal any of this will work for me.
Regards,
Naren
Manually installing the SU will generally solve the problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ
Similar Messages
-
When I go to settings>General, software update is not one of the options. Now what do I do to update my phone?
Read the entire article.
Not just the first part.
It tells you how to update via itunes:
Learn about iOS: How to update your iPhone, iPad, or iPod touch -
HAVE BEEN UNABLE TO RETRIEVE MY OLD LIBRARY OF PHOTOS, ALBUMS AND PROJECTS SINCE DOWNLOADING AN APERTURE 3 SOFTWARE UPDATE TWO DAYS AGO. THE NEW LIBRARY ONLY HAS A FEW NEW PHOTOS IN ONE FOLDER
PLEASE ADVISE AS HOW TO RETRIEVE OLD APERTURE LIBRARY WITH ALL MY PHOTOS, ALBUMS AND PROJECTSFind the old Aperture library in the Finder and double click it to launch Aperture with that library set to the default.
And check your caps look key. It appears to be stuck. -
have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8. -
SCCM - software updates - Not required.
Hi All,
Can some one help with the understanding of "Not Required" software updates. How does actually SCCM decides why a particular software update is not required for a machine.
Rgs,Hi, The detection method for if an update is applicable comes with the WSUS component so, the WSUS client which is configured by the SCCM client policy to use the SUP as a WSUS servern.
The client downloads infiormation about all updates and how they are detected from the SUP and then it sends the result to the MP that processes which updates are applicable or not into the SCCM DB.
So it it the same way the Windows Update agent uses WSUS and Microsoft Update detects which updates are applicable.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Software Update stuck: "Moving files into place"
Software Update stuck. In OS C Lion (10.7.4) I ran Software Update on 25-Jul-2012 (The day when OS X Mountain Lion was released). Software Update had 5 updates, such as Safari 6.0, Remote Desktop, iPhoto (?). Software update gets about 95% done, based on the progress bar. Then it hangs... for hours. I finally had to force-Quit Software Update. Rebooted. Tried again. Same problem. Rebooted and rest the PRAM (command-option-P-R) at start-up. Ran Software Update and had the same problem. Software Update hangs while "Moving files into place." Has anyone else seen this problem and know how to get it to work?
I discovered that if I selected only one update at a time to install, all but one installed (i.e., Remote Desktop, Safari 6, and iWork update). The one update that did not install was the iPhoto update. I had left the install to run overnight (about 7 hours). Console log for /var/log/install.log when installing iPhoto update follows:
Jul 25 21:39:25 mymac installd[2768]: PackageKit: Extracting file://localhost/Library/Updates/041-5716/iPhoto9.3.2Update.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Jul 25 21:40:09 mymac installd[2768]: PackageKit: Extracting file://localhost/Library/Updates/041-5716/iPhoto9.3.2ContentUpdate.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Jul 25 21:40:15 mymac installd[2768]: PackageKit: Executing script "preinstall" in /private/tmp/PKInstallSandbox.cAwBIw/Scripts/com.apple.pkg.iPhoto9.3.2Update.fK Mu0v
Jul 25 21:40:16 mymac _spotlight[4876]: Running Install Scripts . . .
Jul 25 21:40:16 mymac _spotlight[4878]: Begin script: AlertAll.sh
Jul 25 21:40:17 mymac installd[2768]: preinstall: 2012-07-25 21:40:17.123 AlertAll[4880:707] Looking for applications at
Jul 25 21:40:17 mymac installd[2768]: preinstall: 2012-07-25 21:40:17.178 AlertAll[4880:707] --(null)
Jul 25 21:40:17 mymac installd[2768]: preinstall: 2012-07-25 21:40:17.188 AlertAll[4880:707] img:1
Jul 25 21:40:17 mymac installd[2768]: preinstall: 2012-07-25 21:40:17.196 AlertAll[4880:707] >> timerMethod
Jul 25 21:40:17 mymac installd[2768]: preinstall: 2012-07-25 21:40:17.197 AlertAll[4880:707] >> updateTable
Jul 25 21:40:18 mymac installd[2768]: preinstall: 2012-07-25 21:40:18.354 AlertAll[4880:707] >> applicationShouldTerminate
Jul 25 21:40:19 mymac installd[2768]: preinstall: 2012-07-25 21:40:19.385 AlertAll[4880:707] >> applicationWillTerminate
Jul 25 21:40:19 mymac _spotlight[4888]: End script: AlertAll.sh
Jul 25 21:40:19 mymac _spotlight[4889]: Begin script: deleteObsolete
Jul 25 21:40:19 mymac _spotlight[4893]: End script: deleteObsolete
Jul 25 21:40:19 mymac _spotlight[4894]: 2 Install Scripts run.
Jul 25 21:40:19 mymac installd[2768]: PackageKit: Shoving /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root (2 items) to / -
i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?
I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.
-
HT1338 I have version Mac OS X 10.5.8. I no longer get software updates. What could be the problem?
I have version Mac OS X 10.5.8. I no longer get software updates. What could be the problem?
No problem. You have to pay for the next upgrades, just like you paid for the last one.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
MacBook (Pro) Software Update 1.1 stays in the update application
As of the release of the MacBook (Pro) update to fix some keyboard/mouse issues (I didn't notice any problems) I'm not getting rid of the update in the updater:
It installs, reboots and pops up again. I've done this process several times now and if you go to
Preferences -> Softwareupdate -> Installed updates
it is there twice.
After the first time the update got installed, the MacBook was not able to reboot. It stuck in the bootup process and I removed power after approx 15 minutes with a black screen.
After that "forced" reboot, it worked like before - except the broken software update.
That's what I found in the logs, but I've no idea...
8<--------------------------
Dec 25 12:07:48 macbook-pro Software Update[205]: Package Authoring Error: installation-check results requires a message
Dec 25 12:07:49: --- last message repeated 4 times ---
Dec 25 12:08:05 macbook-pro Software Update[205]: JavaScript error "Undefined value" while running "_choice_suvisible"
Dec 25 12:08:05 macbook-pro Software Update[205]: _choice_suvisible returned error: Undefined value
Anyone?I have those same messages in the install.log.
My Software Update.log shows this:
2007-12-18 01:09:38 -0500: Installed "Security Update 2007-009" (1.0)
2007-12-24 12:18:26 -0500: Installed "Security Update 2007-009" (1.1)
After the first time the update got installed, the MacBook was not able to reboot. It stuck in the bootup process and I removed power after approx 15 minutes with a black screen.
Well, this is what fubar Software Update.
If you feel the update was installed properly, Software Update can be set to ignore the update. -
How to Disable SCCM Software Updates on Client Workstations
Hi,
I have enabled Software Updates for all clients, to create a baseline for reporting. The intent was to then disable Software Updates via. SCCM Client Settings, so that our clients could continue receiving updates from Microsoft until we were ready to deploy
updates to our clients.
After modifying the SCCM Client Settings, the Software Update Cycles/actions removed from the Configuration Manager Client on the workstations, however the local policy on the workstation remained configured (did not revert back to Non-Configured).
and the workstation is still looking to the SCCM for Windows Updates.
Using SCCM, how do I get the workstations back to Microsoft for Windows/Microsoft Updates?
TIA,
Bill>I've read that you shouldn't mix SCCM and Group Policy for Windows Updates, when you're intending
to use SCCM.
Correct - if you are using Group Policy to manage the Windows Update settings, ConfigMgr will not be able to manage them. You're post implied you did not want to manage updates with ConfigMgr.
> not all of our workstations are on a domain; so that's not really a complete solution for
us.
ConfigMgr is designed to easily configure devices to update against ConfigMgr, not Microsoft Update, so there isn't just a check box for what you want.
Consider using ConfigMgr Compliance Settings to manage the registry keys for the Windows Update settings you are looking for on your devices.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful". -
it wont let me delete my apple software update so i can download the new version of itunes, it say cannot find the folder
Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Software Update can't connect to the internet after a new install of 10.6
I had a clean install of 10.6 and after that the Software Update can't connect to the internet (the status bar hangs at the beginning and finally it prompts me the internet is not connected) while all my other applications can.
Someone help me out?I am having exactly the same problem as well.. has anybody managed to solve this yet? I have uploaded Snow Leopard - try to connect to Software Update - the menu bar scans a little then stops and then an error saying 'Not connected to the internet'' but the connection is working fine!!
Is this a SL issue? or just an overload with the Software Update programme? I cant do anything - no update for itunes/iphone software, etc.. most annoying.
Look forward to seeing some good news and some answers to this one.
Cheers
Linda -
HT5567 iOS 6.0 software update stuck,, said it took 7 min. Now has been 80% complete for 2hrs.
iOS 6.0 software update stuck,, said it took 7 min. Now has been 80% complete for 2hrs.
Be patient. Apple just released IOS 6.1 and their servers are inundated with downloads. The network link between you and Apple may also have some undisclosed throughput or latency issues.
I just updated to IOS 6.1 and it took much longer than I expected. -
SCCM Software Updates (and SCUP) vs. Application Management for 3rd Party Application Patching
Hi,
We're getting ready to tackle the phenomena known as Java patching, and I was wondering if I could get your personal preference; SCCM Software Updates (and SCUP) vs. Application Management for 3rd Party Application Patching?
I probably should give a little background on my environment; It's a university atmosphere, so unless it's policy, you have to ask nicely...can't tell people to do things they don't want to; multiple version of required versions of Java for what ever reason,
which need to be identified, grouped together, and then upgrade as much as possible without breaking their old applications.
I was thinking that Application Management probably made more sense where it is more robust, especially for removing multiple installs of Java on a single system, but Software Updates/SCUP looks like it was built for this type of patching, so I'm a bit confused
why SCCM would have two components which essentially did the same thing.
Your thoughts?
Thanks,
BillFor Java version management specifically you can already achieve a lot by using the Application Model in CM12.
You can define supersedence between the different versions, just make sure to opt for uninstall of the older version when defining it. -
Software Update Scan Cycle automatically changes the WUServer value
We have 2 forests, Forest A and Forest B that are untrusted. We have a Primary Site installed on Server A in Forest A with a Software Update Point.
We got the Software Update Point Role installed successfully on a server B in Forest B (its a Replica of Upstream server) by opening the firewalls between Server A & Server B. WSUS Sync is working fine between Server A & Server B, no errors in the logs.
We are now trying to patch the clients in Forest B, every time we run a Software Update Scan Cycle on the clients, the Windows Update Server setting in the Local Policy (Specify intranet Microsoft Update Service Location) changes the value from http://serverB:80
to http://serverA:80. Since the firewall rules are blocked between clients in Forest B to site Server in Forest A, the patching fails with the following error - "OnSearchComplete - Failed to end search job. Error = 0x80072ee2."
Manually changing the value in Local Policy to http://serverB:80 does not work, on the next scan cycle, this gets changed to http://serverA:80 automatically.
We tried to set a Domain GPO to avoid changing the value, but that results in a different failure - "Group policy settings were overwritten by a higher authority (Domain Controller) to: Server http://ServerB:80 and Policy ENABLED Failed to Add Update Source
for WUAgent of type (2) and id Error = 0x87d00692."
It looks like a bug where the client is trying to auto assign the primary site server as a WSUS Server Location. If the client needs to access the Server A directly for a Scan cycle, what's the point in installing Software Update Point in Forest B? From a security
standpoint, this absolutely does not make any sense. Any ideas what might be happening?Thank you Jason!
I think I was a little unclear.. the SUP that I installed in Forest B is a replica of the SUP installed on Primary Site (Forest A). You're right, both the SUP's are syncing without issues. (The Upstream server that I mentioned above is the one on Primary
Site)
We do have a MP & DP on the server B (Forest B) that has a replica SUP, and all the client communication is restricted to Server B (Forest B) for Software distribution, Policy assignments, PXE. Could you tell me the purpose of the client to directly
talk to SUP in a different forest when there's already a SUP within the same forest (even though it's a replica).
Maybe you are looking for
-
I have internet explorer. I want firefox 3.6
My website's edit function wont work with firefox 4.0. I need version 3.6. how can I get it? duplicate of https://support.mozilla.com/en-US/questions/834393
-
IPhone hardware failure in 1 yr 2 months! Can anything be done for replacement?
I had purchased an iPhone 5 in Nov 2012 here in India (Bangalore) for ~ Rs 45,000. However for the past few months it started crashing mysteriously. For the last few days the frequency of crash increased to 20-30 times a day (from the previous 2-3 ti
-
Connecting third party motor to p7000 tools
Hi, I have a vexta PK245-011AA stepper motor and I'm trying to control it with a P70350 drive via P7000 tools software. When I enter the specification of the motor in the "Stepper Motor/Motor File Editor" menu and select my motor configuration (see a
-
Iphone 4s doesn't vibrate after installing IOS 8.1
My Iphone 4s, 32GB lately doesn't seem to vibrate and i suppose it is after the recent update of IOS 8.1 . It does vibrate when i do certain tasks like keying in a wrong password or when i go into Settings>Sound to ensure that vibrate is on for both
-
Not receiving verification email for Apple ID very frustrating
Not receiving verification email for Apple ID very frustrating