Scheduled report subscription only writes file once

Early in our SCCM 2012 roll out we want regular updates how many machines are active.
We have configured a Report Subscription to save the report as an XLS file on a file share - Daily schedule for 08:00AM - the first file was forced at 11:23AM on 17/09/2013 and the daily updates were not generated though the schedule ran and reported the
failure.
The subscription writes one file to the share at first scheduled time and at next scheduled time reports "Failure writing file \\Server\share\reports\file.xls : a log on error occurred when attempting to access the file share. The user account or password
is not valid"
To confirm username and password I logged on to a Win7 workstation with those credentials. I then browsed to the reports directory on the share and created a new blank file. THis confirmed credentials are correct and the user has permissions to write new
files to the share.
By changing something about the subscription delivery (e.g. overwrite files or increment file names or changing the file name) the next schedule will write the file. I am forcing the re-try by changing the schedule time and receiving the above error.
The original schedule was Daily and changing the time to get it to re-run today caused the failure. When I changed the schedule to Hourly (every 5 minutes) and changed the file name the report ran every 5 minutes successfully. I have reverted to the Daily
schedule ans set it to run at 7am so we'll see next week whether this has resolved the problem
It is clear that the message is not accurately describing the problem.
Anthony

Hi,
Windows File Share Delivery Options
There are three options for overwriting. The second option-Do not overwrite an existing file-demonstrates that
if the report file already exists, no action will be taken.
Overwrite an existing file with a newer version
If the report file already exists, it will be overwritten with the new version.
Do not overwrite an existing file
If the report file already exists, no action will be taken.
Increment file names as newer versions are added
If the report file already exists, the new report will have a number added to the file name to distinguish it from other versions.
For more information, please review the link below:
Create Subscription Wizard - Subscription Delivery Page
http://technet.microsoft.com/en-us/library/cc678423.aspx

Similar Messages

Scheduled report error - Error in File

Crystal Reports Serve XI R2 SP4
Microsoft SQL Server 2005
Hi,
Ihave a scheduled report that runs perfectly in most instances, however I am seeing the following eror message when a particular parameter is seected:
Error in File D:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\BWAQTSREP-1.reportjobserver\~tmp1d945a07834566a.rpt: Operation not yet implemented.
Any ideas on what this means, and how to resolve?
Thanks!
Penny
Edited by: Penny Braithwaite on Apr 3, 2009 11:51 AM

Hi Ramesh,
you have to Login into the SAP Service Marketplace at http://service.sap.com. But you need a S-User to do so.
You can request your S-User on the top right of the Website.
Regards
-Seb.

Report Subscription - Failure writing file - The network path was not found.

I have several subscriptins which have been working fine.
All suddenly stopped with same error - Failure writing file - The network path was not found.
The subscriptions write to a number of different network paths, all of which exist and are accessible.

Is this a repeating failure or one time occurrence? If it's a one time occurrence it could have been a short network outage. If repeating look and ensure the user that the subscription is using to write the files still has the appropriate permissions,
is enabled, not locked, etc. Other things to possibly consider would be flushing the dns cache on the server. It's possible a firewall rule could have been put in place that would block the ability to access said location as well. The best
thing you can do is start by asking "what has changed".

Schedule Report Error - Error in File (Operation not yet implemented)

Crystal Reports Server XI R2
Microsoft SQL Server 2003 SP2
We have a report that is run for 100s of Schools once a month. We started getting the below message. We tried to manually run the report from the CMC and get the same message.
Any suggestions on how to resolve this?
Thanks,
Lisa
Status: Failed
Printer: The instance is not printed.
External Destination: None
Data Refresh Settings: Use the server defaults
Start Time 4/7/09 3:10:21 PM
End Time 4/7/09 3:10:33 PM
Server Used: CO-APT01.reportjobserver
Error Message: Error in File D:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\CO-APRT02.reportjobserve\~tmp4cc5a1e77c49110.rpt: Operation not yet implemented.

Hi Rene,
Try this as remedy to your problem.
Whenever you are using the New Page before for a Group, go to Section Expert for the corresponding section and check the New Page Before property and go to Conditional formula and type the following:
Not OnFirstRecord
Whenever you are using the New Page after for a Group, go to Section Expert for the corresponding section and check the New Page After property and go to Conditional formula and type the following:
Not OnLastRecord
HTH...
Thanks,
Amogh

How to Schedule Jobs to only run during a time window

I have a long running task that needs to schedule jobs to process data.
I only want these scheduled jobs to start during a specific window of time each day, probably 10:00 PM to 6:00 AM.
If the scheduled jobs do not begin during the specified time frame, they must wait until the next day to start running.
Each scheduled job will only be executed once and then auto dropped.
How should I go about creating these scheduled jobs?

Hi Jeff,
I agree that the documentation isn't clear enough about the purpose of windows.
You can indeed use windows for changing the resource plan, but you can also use them for scheduling your jobs.
I did a simple test in real-time to illustrate the latter.
At around 10.30 am today I created a table that will populated by a job:
CREATE TABLE TEST_WINDOW_TABLE(EVENT_DATE DATE);
Then, I created a window whose start_date is today at 10.40 am :
dbms_scheduler.create_window(
                             window_name     =>'TEST_WINDOW',
                             resource_plan   => NULL,
                             start_date      => to_date('10/04/2014 10:40:00', 'dd/mm/yyyy hh24:mi:ss'),
                             repeat_interval => NULL,
                             duration        =>interval '5' minute
You can see that this window doesn't have a resource plan, and its repeat interval is NULL (so it will be opened only once).
The window will stay open for 5 minutes.
Finally, I created a one-off job whose schedule is the previously created window:
DBMS_SCHEDULER.create_job (
                           job_name      => 'TEST_WINDOW_JOB',
                           job_type      => 'PLSQL_BLOCK',
                           job_action    => 'BEGIN insert into test_window_table values (sysdate); COMMIT; END;',
                           schedule_name => 'SYS.TEST_WINDOW',
                           enabled       => true,
                           auto_drop     => true
Checking the user_scheduler_job_log before 10.40 would return no rows, which mean the job hasn't started yet since the window was not open.
Now, from 10.40, it shows one entry:
SQL> select log_date, status from user_scheduler_job_log where job_name = 'TEST_WINDOW_JOB';
LOG_DATE                                                                         STATUS
10/04/14 10:40:02,106000 +02:00                                                  SUCCEEDED
The TEST_WINDOW_TABLE has also got the row:
SQL> select * from TEST_WINDOW_TABLE;
EVENT_DATE
10/04/2014 10:40:02
Voilà.
In your case, since you want to run the jobs daily between 10 pm and 6 am (duration of 8 hours), the window would look like this:
dbms_scheduler.create_window(
                             window_name     =>'YOUR_WINDOW',
                             resource_plan   => NULL,
                             repeat_interval => 'freq=daily;byhour=22;byminute=0;bysecond=0',
                             duration        =>interval '8' hour
For your jobs, you may need to specify an end_date if you want to make sure the job gets dropped if it couldn't run in its window.

WebI does not return failed when scheduling a report which only holds parti

WebI does not return failed when scheduling a report which only holds partial results.
We have scheduled reports which take some time to run. When they are scheduled they sometimes show successful even though the report only holds partial results. The only indication is when you open the report as webi report you see the warning that it holds partial results.
When running the report manually, it works file.
The issue is not in the no of rows in the universe settings because we this unselected. The issue is that it times out.
The reason that it times out is that a lot of resources are used for loading and processing data when the report is scheduled. When running it manually, it works because at this time the serverload is less. the time in the universe is set to 10 min.
The version we have is BOXIR2-SP4.
Ok. Issue identified.
The question is - why is the report successful when it holds partial results? If this is normal behavior, noone can really trust the scheduled reports, especially when you save it to excel and send it by mail.
Is there a solution for this except increasing the allowed query time which would not solve the issu but only allow more reports to complete?
Edited by: Karlgren Michael on Sep 17, 2009 1:22 PM

Hi ,
Currently this problem exists in XI R2. This feature will be part of thenext Service Pack i.e XI R2 SP6.
This CER will be delivered from IDC Webi and BIP Platform as part of Jupiter Sp6.
Problem Statement:
Scheduled WebI Reports which are partially refreshed are distributed to the destinations for Users to View and make decisions. These users arenu2019t usually aware that these reports have u201CPARTIAL RESULTSu201D
Recomended Solution:
Allow the Schedule Creator / Modifier to set a parameter to stop the distribution of the u201CPARTIALLY REFRESHEDu201D WebI report.
Thanks
Salini

How to modify 'Specified File Name' of a scheduled report

I run a daily scheduled report every morning and send it out as an emailed attachment. My problem is, I want the file name of the pdf attachment to include the previous day's date. How can I modify the 'Specified File Name' setting in the destination tab to reflect the previous day's date. I do not want to use %SI_STARTTIME% because that only shows the date&time that the report was actually run....I need the previous date. So far I am unsuccessful.
Thanks

Hi,
i think this is only possible via the SDK. I would recommend creating a Support Message with SAP to solve this issue.
Maybe there is already Samplecode available from the Support.
Regards
-Seb.

Automatically schedule FR or IR reports to create Excel files???

Hello,
My client asked me to 1) create reports against Essbase cubes, 2) automate the update of the reports to Excel files and 3) email the results to various people. In the first phase of this project I was able to do some of this as follows:
1) Created FR reports.
2) Scheduled the update of the FR reports to PDF files using the scheduler in Hyperion Workspace. NOTE: I created PDF files because that is the only thing that the scheduler can automatically produce from FR reports.
3) Created an Excel VBA application that emails the PDF files to a variable list of recipients (each report goes to a different list of people).
Now we are entering the second phase of this project and the client is asking to have the reports created in Excel files instead of PDF.
***** Questions *****
1) Can an IR report be scheduled using the Hyperion Scheduler in Hyperion Workspace to create Excel files?
2) Is there a utility (either Hyperion or other) that can convert PDF files to Excel files with the exact formatting of the original PDF?
Thank you,
Bill H

Thank you for your reply. After your reply I looked in the Hyperion Workspace User Guide and found how to schedule an IR report to create an Excel file. I think the next thing I am trying to determine is how to do "bursting" in IR. I currently have an FR report that gets data from Essbase. I have scheduled this in Workspace to run for all children of a member (or a different example would be all zero level decendants of a member). The Workspace scheduler allows me to create a file for each member and to add the member name to each filename so that they are different. Can I do the same type of thing with IR?
Thank you,
Bill H

My Macbook Pro(2010) only writes in capitol letters, can´t write numbers and only starts up in safe mode once a week!

Hey guys!
So my Macbook started acting weird a couple of months ago. All of a sudden i could only write in capitol letters and i couldnt write any numbers. Every time i tried to write a number, i would only get the symbols instead such as " "#¤%&/ " etc. I tried restarting it and the computer booted in safe mode and still had the same problem as before. I decided to read around some forums and someone suggested " zapping the PRAM" which i did and it fixed the problem for about 1-2 days and then it was back to the normal.
I decided to turn in my computer to an authorized Apple technician to take a look at it and after a few days i got a phonecall saying that he had run tests for 6 hours but couldnt figure out what was wrong with the computer, he just knew that something was wrong. When i got the computer back it was working perfectly but the weird thing is that every now and then the same thing would happen with the keyboard and the weirdest part is that it usually stopped working on fridays, once a week.. Anyways i have done all i can, now im turning to you guys for some much appriciated help.
Any suggestion on how to fix this problem of mine?

Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.

Is it possible to output a report as a text file (.txt) in a Data Driven Subscription?

Is it possible to create a Data Driven Subscription report as a text file output to a shared folder? Thanks.
Kahlua

Hi Vicky:
Thank you for your reply. I changed the config file in SSRS and it works. I managed to generate a text file with Data Driven Subscription as the report output in a shared folder. However is it possible not to have the "double quote" wrapping around
the text. Do I need to modify the config file to remove the "double quote" and how. Thanks.
Kahlua
<Render>
<Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering"/>
<Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="False"/>
<Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"/>
<Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering"/>
<Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
<OverrideNames>
<Name Language="en-US">TAB (Tab Delimited Text File)</Name>
</OverrideNames>
<Configuration>
<DeviceInfo>
<FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>
<UseFormattedValues>True</UseFormattedValues>
<NoHeader>True</NoHeader>
<FileExtension>txt</FileExtension>
<Qualifier xml:space="preserve"></Qualifier>
<ExcelMode>False</ExcelMode>
</DeviceInfo>
</Configuration>
</Extension>
<Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RGDIRenderer,Microsoft.ReportingServices.ImageRendering" Visible="False" LogAllExecutionRequests="False"/>
<Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="False" LogAllExecutionRequests="False"/>
<Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
<Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
<Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" LogAllExecutionRequests="false"/>
<Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering"/>
<Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering"/>
</Render>

Can we write files and leave them as read-only

Hey Adobe AIR Community,
Another Adobe AIR question for you: Can we write files to the file system and leave them as read-only in Adobe AIR?
In the future, we would overwrite these files (or delete them and write a new one).
Thanks,
Mauricio

Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to Onedrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem. The
work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Wanikiya and Dyami--Team Zigzag

Add CSV file as Scheduled Report Output Format

Is there any option in BOXI R2 and R3 - Add CSV file as Scheduled Report Output Format. If not, how do we achieve this?

Hai
http://www.christiansteven.com/products/crd/
http://webtrends.dbt.co.uk/wrc/help/webhelp/hlp_exrpt.htm
http://www.businessobjectstips.com/tips/infoview/business-objects-cannor-not-create-an-excel-file/

Weird error: "Cannot write file summary in a read-only environment"

Disclaimer: We are using an old version of bdb - 3.2.76 but are not able to easily upgrade.
We see this occasionally in production. From looking at the code it looks like critical eviction is happening since more memory is used then the limit we set then eviction is happening but then failing since the env is read only. I'm just wondering how it got to this point. we set the max size (je.maxMemory) to 1572864 bytes.
This is not urgent but is adding noise to logs so any suggestions would be welcome...
<application specific exception>
…causedBy com.sleepycat.je.DatabaseException: (JE 3.2.76) Cannot write file summary in a read-only environment
at com.sleepycat.je.cleaner.UtilizationProfile.putFileSummary(UtilizationProfile.java:720)
at com.sleepycat.je.cleaner.UtilizationProfile.flushFileSummary(UtilizationProfile.java:708)
at com.sleepycat.je.cleaner.UtilizationTracker.evictMemory(UtilizationTracker.java:120)
at com.sleepycat.je.evictor.Evictor.evictBatch(Evictor.java:314)
at com.sleepycat.je.evictor.Evictor.doEvict(Evictor.java:253)
at com.sleepycat.je.evictor.Evictor.doCriticalEviction(Evictor.java:279)
at com.sleepycat.je.dbi.CursorImpl.close(CursorImpl.java:690)
at com.sleepycat.je.dbi.CursorImpl.close(CursorImpl.java:660)
at com.sleepycat.je.Cursor.endRead(Cursor.java:1820)
at com.sleepycat.je.Cursor.retrieveNextAllowPhantoms(Cursor.java:1616)
at com.sleepycat.je.Cursor.retrieveNext(Cursor.java:1397)
at com.sleepycat.je.Cursor.getNext(Cursor.java:456)
...

Hi Nick,
It is strange to me also that this is happening in a read-only env. Looking at the code, we don't prevent this sort of eviction in the 3.2 release or later releases. Yet we've never seen this problem before.
This sort of eviction only happens when writing is occurring. Of course, in a read-only env there is no writing. The only way I can think of for this to occur in a read-only env is when there is a very large recovery interval -- the amount of log between the last checkpoint start and the end of the log. This can occur if you didn't close the env cleaning when you last wrote to it, or if the last checkpoint just happened to be very large.
So one thing you could try is to ensure that you have a small checkpoint when you write to the log, before opening it in read-only mode. To do this, just before you call Environment.close, call Environment.checkpoint(new CheckpointConfig().setForce(true)). This will do one checkpoint before closing the env, and then another during the close. The last checkpoint should be small.
If you can't do this, or it isn't sufficient, you could increase the je.cleaner.detailMaxMemoryPercentage env config property. This is the max amount of memory (% of total cache) used for the information that is being evicted. Since nothing can really be evicted in read-only mode, there is no harm in setting this to a much higher value than the default (2). I would try 10. This doesn't reserve or waste any memory, it just prevents this sort of eviction from occurring until a larger part of the cache is used. This is probably the simplest solution.
A third approach is to simply accept that this sort of eviction will be attempted, but try to prevent the exception. If you're willing to rebuild JE (and you're not a supported Oracle customer -- please contact us if you are), then you could simply replace the 'throws' statement with a 'return null' in src/com/sleepycat/je/cleaner/UtilizationProfile.java:
    private synchronized PackedOffsets putFileSummary(TrackedFileSummary tfs)
        throws DatabaseException {
        if (env.isReadOnly()) {
            throw new DatabaseException
                ("Cannot write file summary in a read-only environment");
        }--mark

[svn:bz-3.x] 15191: Minor update to the build. xml and only make files write protected with chmod.

Revision: 15191
Revision: 15191
Author:   [email protected]
Date:     2010-04-01 07:06:21 -0700 (Thu, 01 Apr 2010)
Log Message:
Minor update to the build.xml and only make files write protected with chmod.
Modified Paths:
    blazeds/branches/3.x/modules/sdk/build.xml

DyNamic I agree that is sounds like you may be facing a network configuration issue. Please let your network people know that you need access to the following servers and ports to download Adobe applications through the Adobe Application Manager:
ccmdls.adobe.com:443
ims-na1.adobelogin.com:443
na1r.services.adobe.com:443
prod-rel-ffc-ccm.oobesaas.adobe.com:443
lm.licenses.adobe.com:443
In addition for updates to download properly you will also need access to the following servers:
http://www.adobe.com/:80
htttp:///swupmf.adobe.com/:80
http://swupdl.adobe.com/:80
http://crl.adobe.com/:80

OPEN DATA SET to write files in application server folder - some of the files are missing

Hi,
I'm using OPEN DATASET statement in batch job to write the files in application server. what i'm experiencing is when i schedule the batch job all the files are not writing into the folder.
If i run the report again to write the missed files, the files are writing into the application server folder.
after opening the dataset, i'm closing it. do we need to give any delay between creation of the files? or until the first write operation is done, 2nd one can't start ..how can we achieve this.
Thanks for your help in advance.
Thanks,
Adi.

Hello Bathineni,
Are you using the sy-subrc check after the OPEN DATASET statement.
If not use a sy-subrc check and transfer the contents to file only when the OPEN DATASET returns value sy-subrc = 0.
if sy-subrc is 8 repeat the same loop say for 3 attempts until the OPEN DATASET becomes 0.
DO 3 TIMES. <---- put any number of attempts as you need
OPEN DATASET.
IF sy-subrc = 0.
TRANSFER contents to file.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET.
Regards,
Thanga

Scheduled report subscription only writes file once

Similar Messages

Maybe you are looking for