Scheduled Tests in OTM fail but pass if I start them manually from OTM

hello,
I´m finally able to start my OpenScript tests from OTM which took me a while to find out!
Anyway, now I wanted to schedule the same tests, unfortunately it always failes.
The Internet Explorer does not even run....
What could be a solution?
Anyone had the same problem too?
Please help!!!
Kind regards,
Andrea

sorry, my fault ;-)
It works now properly

Similar Messages

I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library "~/Pictures/Family IIi.aplibrary". Please help, thanks

I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks

Are all three libraries under your account or are they in different accounts? Any other errros on the system?
Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics

My graphic card failed but passes the recall test - surely Apple would replace it? How wrong can you be!

Even though I had read about the product recall on some iMacs, mine had never had an issue, but to be safe, the plan was to take it to an Apple store to have them test and replace it.
A week ago, on occasion, the screen suddenly started going completely gray, everything else seemed to be working fine, and any apps running would continue to do so. Without being able to see the screen, the only options was to power it down, run any diagnostic test and start normally. It passed pro tools tests, with no warnings so I thought it could have been a software issue. After many restarts without anything else plugged in, the iMac appeared to function for maybe a day or so, but gray screen whenever it wanted to.
So I called Apple, they told me to get it into a service centre, and they would do further tests. Whilst on the phone to the engineer, my iMac with the gray screen suddenly refused to power back up. The engineers tell me that the graphic card fails any benchmarking tests with corruption and the same gray screen issue, so it looks promising yes? No. The specific tests that the machine must fail for the recall - passed.
Having spent almost an hour on the phone to a Apple senior advisor today, he tells me that it is not covered by the recall !!
The machine is one of the matching serial numbered machines in the recall, it has suddenly developed a graphic card issue that leaves the machine unusable, it suddenly started having this problem within weeks of the recall being announced - It has the faulty card in it, it has the fault - yet it does not qualify?
Can someone please tell me what I could have done to get this card replaced without the estimated £250 charge to get my machine running again.
I am a die hard Apple enthusiast, I have converted everyone I have been in contact with to purchase from them for their legendary customer services and yet feel perplexed as to what I should do next.
My first reaction is to raise a big fuss about the situation at an Apple store, but I can't blame them too much if my machine does not match the recall criteria - but come on, it can't be a coincident that this card has failed now, can it?
What do I do next. I don't want to take my machine over to proper Apple store and raise a fuss, that would be counter productive. But really Apple
Anyone have a suggestion - would you buy another iMac that could have the same problem and get the same response?
To any Apple engineers out there who can look at a case number my ref number is 500592345, apparently there is a lot of info in there, but nothing that will help me!

Apple engineers do not participate here. The only replies you will normally get are from people who are, like me, just fellow users, and there's nothing any of us can do to intervene in this matter.
If Apple says that your system is not covered by the recall, there's not much you can do. You can try taking your system to an Apple Store and politely - do not "make a fuss"; polite but gently insistent is much more likely to get you useful results - ask for assistance. Or you can call Apple tech support, ask to speak with customer relations, and explain the situation to them and request coverage under the recall program.
If all that fails, though, then you're probably at a dead end and will need to pay for the service if you want it done.
Regards.

I have deleted podcasts in itunes, but how do I remove them completely from my 4s? Not unsubscribe, but REMOVE, I have deleted podcasts in itunes, but how do I remove them completely from my 4s? Not unsubscribe, but REMOVE

OK, so I have gone into iTunes on my desktop computer and completely deleted podcasts that I no longer want. I synced my phone (4S) but the podcasts are still showing on my phone. I am already unsubscribed, but I want to totally DELETE them. Why is this so hard?
Also, why doesn't Apple bring back the right-click delete option in iTunes?

Under "My Podcasts" swipe down to reveal a search bar, to the left will be an "EDIT" button. Press and delete the ones you want. I agree it's not very intuitive, should just be like any app, hold down and either move or delete.

Shellext dlls are not preserved across upgrades, but the programs that installed them are

classic 32 & 64 bit shell extension dlls (%windows%\system32\shellext resp %windows%\syswow64\shellext) are not preserved across system upgrades, yet the programs that installed the extensions are. copying them manually from windows.old is a workaround,
but probably not viable for normal users...
very simple, basic tool that is affected by the problem: http://code.kliu.org/hashcheck/
the problem has been around since the first windows 10 build, and is still present in 10061

Hi heldchen,
Thanks for posting and sharing this in forums.
For the current situation, I am not able to test this out. I will setup a test, and once I have the same symptom, I will submit feedbacks from my side.
Besides, fi any further suggestions or problems, please take use of feedback tool.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Apple Hardware Test (AHT) Hard Drive Full Read Fail But SMART Status OK

I have a Mac mini Server from Mid 2010 running Snow Leopard Server.
Ocassionally, it'll freeze up with the spinning beachball wheel for a few minutes. This usually happens when opening an app or performing an app function from the menu bar. It's a pretty clean system—there are not many apps installed.
I suspect it's a hadrware issue. I ran Disk Utility's Permission and Disk Repair. All good. SMART Status is verified. So I ran the Apple Hardware Test. Everything passes except for the Hard Drive's "Full Read"—it fails because "Reading took longer than the average time". The Hard Drive "Short .. test" and "Check SMART Status" pass.
Does anyone have an idea of what's going on here? Is the hard drive the issue? I don't understand how there can be a read issue (or hard drive issue), when the SMART Status is verfied.

S.M.A.R.T isn't perfect. Neither is AHT for that matter, but if it is reporting that reading is taking longer than it should then an impending failure is likely. The occasional "wait cursor" appearance supports that diagnosis.
Consider yourself fortunate in that you still have the ability to back up anything important, and you can plan a convenient time for its replacement.

How can I copy test plan WITH ITS RESULTS (PASS/FAIL) to other project in MTM??

How can I copy test plan WITH ITS RESULTS (PASS/FAIL) to other project in MTM??

Hi odedn,
Thank you for posting in MSDN forum.
Based on your issue, you mean that you want to copy the test plan with test results from the current team project
to other team project, am I right?
If yes, as far as I know that when we copy test plan with test results to other team proejcts. It is default that
there just will not copy the test plan with test results (pass/fail) to other team project in MTM.
You can refer the following MSDN document’s
what gets cloned, it explained that which objects are copied from the source test plan to the destination test plan.
Reference:
http://msdn.microsoft.com/en-us/library/hh543843.aspx
If you still want to this feature, I suggest you can
submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote. If
you submit this suggestion, I hope you could post that link here, I will help you vote it.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

11g Cluster: User equivalence check failed on Node1 but passed on Node2,

From Node1:
[oracle@redhat4_1 bin]$ ./cluvfy stage -pre crsinst -n redhat4_1,redhat4_2 -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "redhat4_1"
Destination Node Reachable?
redhat4_2 yes
redhat4_1 yes
Result: Node reachability check passed from node "redhat4_1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
redhat4_2 passed
redhat4_1 failed
Result: User equivalence check failed for user "oracle".
WARNING:
User equivalence is not set for nodes:
redhat4_1
Verification will proceed with nodes:
redhat4_2
From Node2:
[oracle@redhat4_2 bin]$ ./cluvfy stage -pre crsinst -n redhat4_1,redhat4_2 -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "redhat4_2"
Destination Node Reachable?
redhat4_2 yes
redhat4_1 yes
Result: Node reachability check passed from node "redhat4_2".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
redhat4_2 passed
redhat4_1 passed
Result: User equivalence check passed for user "oracle".
Why cluvfy failed on node1 but passed on node2? Thanks.

Last time I saw that, the password-less SSH was working only in one direction. Root cause was not quite following the instructions to copy the authorized_keys to all nodes.

Using tcm to load test scripts into mtm, but action fails.

Hi,
I am trying to load test scripts into mtm but action fails saying : "The work item cannot be saved because at least one field contains a value that is not allowed."
My guess is that this issue is due to the parameters/attributes we give to a test case([testmethod], [description()], etc.). I am unable to find what all parameters/attributes that can be given to a test case.
Please help me with this issue.
Regards,
Payal Prajapati
Payal Prajapati.

Hi,
I use VS 2012.
One of my test method code is:
/// <summary>
/// Test Scenario to validate auto escalation of chat if within some time analyst does not respond to user.
/// </summary>
[TestMethod]
[Description("Validating scenario, Auto-Escalation of chats to other Analyst.")]
[Priority(2)]
[TestCategory("Acceptance")]
public void ValidatingAutoEscalationOfChatsToOtherAnalyst()
User alice = new User(User1);
alice.SubmitChatInfo();
Analyst admin = new Analyst(Analyst_Admin);
admin.Login();
Analyst analysttier1 = new Analyst(Analyst_Tier1);
admin.SelectQueues(Tier1Queue);
admin.MakeAvailable();
alice.USendMessage("I have a problem.");
admin.AnalystWaitForAutoEscalation(25000);
string Message1 = alice.GetAnalystName();
analysttier1.Login();
analysttier1.SelectQueues(Tier1Queue);
analysttier1.MakeAvailable();
alice.USendMessage("I have a problem.");
string Message2 = alice.GetAnalystName();
analysttier1.ASendMessage("hello, i'm here to help.");
SprtTestContext.sprtTestContext.WriteLine("Earlier agent was: '" + Message1 + "' and present agent is: '" + Message2 + "'.");
Assert.AreNotEqual<string>(Message1, Message2, "=> Issue in auto escalation.");
analysttier1.WrapChatClose(4, "fixed", "comments"); }
Payal Prajapati.

[svn:bz-trunk] 16330: QA: Yes - Ran test locally and it was failing but tested condition was true - there is no services-config .xml file

Revision: 16330
Revision: 16330
Author:   [email protected]
Date:     2010-05-26 07:55:41 -0700 (Wed, 26 May 2010)
Log Message:
QA: Yes - Ran test locally and it was failing but tested condition was true - there is no services-config.xml file
Doc: No
Checkintests: NA
Details: Updated expected error message to match current error.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/NoServicesConfigFileTest/error.t xt

I have uploaded detail.txt at below url.
http://m.uploadedit.com/b041/1413264342685.txt
Hi Mahesh,
According to log file, I find the message ‘The setup100.exe.config file was not found, therefore the DTSWizard and SQLWatson app config files were not replaced’. It seems that the SQL Server setup file is not complete. Please check that if the SQL Server
setup file is corrupted, if it is corrupted, please download it again and reinstall SQL Server 2008 R2.
However, if there’s no problem with the setup file, please check that if there is third-party software such as anti-virus software on your computer blocking the process of SQL Server installation. In addition, make sure that you choose ‘Run as administrator’
to launch the setup and configure SQL Server service accounts appropriately with administrator permission during the installation.
For more details about this error, please review the following similar thread.
http://answers.flyppdevportal.com/categories/sqlserver/sqlsetupandupgrade.aspx?ID=ad794a97-09ae-4aae-9d68-0b06f9af3e16
Thanks,
Lydia Zhang

PC-DIO96 works in test panels and MSVB but fails in MSVC++

This used to work fine, but no longer works.
In test panels and MS Visual Basic I am able to read and set the DIO lines with no problems. In MS Visual C++ I am now getting a dimmed light on my relays instead of an off condition when I attempt to toggle relays. Inputs also do not change states. The same hardware works in the NIDAQ test panels and under MS Visual Basic. What is going on???
I have reloaded, tested, and simplified my code. I get no error codes from any of the function calls. This used to work fine. I am completely lost as to what has happened. I have to get this working under MSVC++ ASAP. Please email with any help you can.
I have attached a copy of the test c++ file I have been tr
ying to debug with. Thanks.
Attachments:
NidaqTest.cpp ‏3 KB

If your LED outputs are dimming instead of turning on, it sounds like they may be rapidly switching on/off. Try stepping through your program to see if this is happening.

In RDS Configuration, Test Connection is Succeful, but Test Debugger fail?

In RDS Configuration, Test Connection is Succeful, but I click Test Debugger
Test Debugger failL
"it said : An RDS connnection was established but the ColdFusion RDS line debugger could not be contacted. The server gave the following message: Coldfusion line Debugger is not enabled."
My Server is running normal, connection is OK! How to fix?

@waveset wrote:
Just concentrate on Username and Password. They are defintely not correct and as said by snowdog.Thank you for Snowdog and @waveset for your quick response.
Yes, "admin" and password "****" are an example about a user created in AD1 with rights enough to create and search objects in AD.
But I thing the problem is not the user. Could it be the password encryption?
I post a part of trace file for more information:
20080103 11:21:36.640 service-j2ee-3(0x0108c497) ADSIResourceAdapter#getResponseBytes() Data [0x03b0]: 6f 00 6e 00 73 00 65 00 3e 00 0a 00
20080103 11:21:36.674 service-j2ee-3(0x0108c497) ADSIResourceAdapter#getResponse() Exit returned= <?xml version='1.0' encoding='UTF-16'?>
<Response>
<Result status='error'>
<ResultItem type='message' status='error'>
<Message>
<Text>Error opening object 'LDAP://CN=Users, DC=mydomain, DC=vodam, DC=local': ADsOpenObject(): 0X8007052E: , 8009030C: LdapErr: DSID-0C09043E, comment: AcceptSecurityContext error, data 0, vece, Logon failure: unknown user name or bad password.
</Text>
</Message>
</ResultItem>
</Result>
</Response>

Running OpenScript tests in OTM does not work

Hi,
I added an OpenScript functional script (for Siebel) in OTM, and when I click on "Run this test", and I see no action. In the Run History, OTM shows in the "Results" column that the test is "Running", although more than hour has passed since starting the test run.
Are there any settings/configurations I should do to get this to work?
Another questions, could I use OTM to run a group of OpenScript functional scripts as batch testing? If not, how could I run batch OpenScript testing?
Thanks,
Shadi

Hi again,
I have solved the issue of openscript tests running with OTM. I opened the System manager from OTM (Tools-> Systems) and enterd my Windows account password and clicked "Test", then went back and ran my openscript test and it satarted to work. I wonder why this was not mentioned in any of the documentation files.
I also face the common issue that OTM ignores the think() statement, and don't know how efficient using the delay() statement is and if it actually works.
ISSUE1 Is there a way to force OTM to perform the think() statement? It would be great if we have it as an option.
Regarding batch testing, I created a Schedule Task in OTM, and selected some tests to run as a batch, and it worked. The issue I have here is when I want to clone the Task I ran previously by clicking on the "Clone", it does not include the list of tests I selected in the cloned Task.
ISSUE2 For example, if I have ceated a Task and added 10 tests to it, and later after it was run I want to clone it in order to run it again, the 10 tests are not inculded and I will have to select them manually.
ISSUE3 Is this the only way to run batch testing for openscript (using Task)?
I will try to find a work around for this issue, but hope you guys could help.
Thanks,
Shadi

Remotely trigger tests in OTM?

Hi there,
All my searching is just returning results regarding database triggers, so I'll just ask here... Is it possible to remotely trigger test execution in Oracle Test Manager? I know I can schedule tests for a specific time/dates/etc., but I was hoping to get a step further. For example, we will have an automated process in Hudson that builds the product and then deploys it after there's new code pushed into Mercurial, is it possible to have tests get triggered or kicked off in OTM other than manually or time-based?
Thanks,
-Troy

Getting the test to run from the command line was really simple with Appendix A, and it created results saved results to disk... But those results aren't showing up in OTM. Is there a way to import results into OTM? The end goal is to be able to run the tests housed in OTM to take advantage of the reporting capabilities built-in, whenever there is a successful build of our product.
Thanks,
-Troy

Need failed and passing scores to be sent to LMS

I need to track all test attempts and score (passed and failed). Currently, my LMS (SUMTOTAL) will only report on passing scores. I can see that a learner has taken the test 10 times and the passing score, but I can't see their scores on attempts 1-9. I am using captivate 6 and I was wondering what my quiz settings should be to report on failing scores.

Captivate throws all of the scoring data to the LMS for each and every user session. If the LMS doesn't retain anything other than the final score, that's not something you can control within Captivate. Talk to your LMS vendor.

Scheduled Tests in OTM fail but pass if I start them manually from OTM

Similar Messages

Maybe you are looking for