Scheduler Menu option in an InfoPackage

What does the option Initialisation option for Source System which is available from the scheduler menu exactly mean. Thanks

Hi Niten!
It shows to you all the init you made for a specific datasource/sourcesystem...if you find a row here, it means that the init channel is active and you can load delta for that specific flow!
When you have to reinit, first of all you have to delete this row and then request a new initial load, otherwise the system cannot allow to perform a new init (with overlapping condition) if you don't deete the previous one!
Hope it helps!
Bye,
Roberto

Similar Messages

HP 1317 - permissions and missing menu options - any ideas?

I've just installed that latest drivers from August 2006 for the HP 1317 (All in one) from their website and have a couple of problems.
The dropdown in my print dialog shows:
Copies & Pages
Layout
Scheduler
Paper handling
Colorsync
Cover page
Safari
Summary
There is no way to set the print quality (b&w, best/faster etc) any more.
Secondly, Verify Permissions in Disk Utility after the driver install shows loads of HP drivers with incorrect permissions. I have a feeling that if I fix these then I will be greeted with one of the popup menu options turning into hp_131 .. something with a score line through it. This has happened before but I don't want to try again!
This option has been OK before but I'd like to know how to get it back. Do I have to restart after installing new drivers?
Thanks in advance.

I guess I need to add some clarification to my problem. The issue is not within the forum itself, rather in Acrobat Pro v9.3.2 (Windows).
When I open Acrobat Pro (without holding the Shift key down) some of the menu options are not available. For example:
Forms > Start Form Wizard [not present]
Forms > Manage Form Data > [no sub menu options present]
Additionally, when I open Acrobat Pro (without holding the Shift key down) and select, from the main menu bar, "Edit > Preferences", I receive the following error message:
Failed to load an application resource (internal error).
I have looked at doing a repair, but the only option in the Add/Remove Programs is to "Remove".

Limited universal app HP print menu options

Just bought a new MacBook Pro and use an HP Photosmart 8750 and a Canon BJ-85. No problems using the Canon -- plugged it in and I was ready to go. Even though the HP is on the Intel Mac supported printer list, there was no photosmart print drivers found in the Print Browser besides the gimp (which did not work). I went to the HP web site and downloaded/installed the 8750 driver (version 3.1) with no problems. When I'm using non-universal apps like Photoshop CS2, I have plenty of print menu options: copies, layout, scheduler, paper handling, color sync, paper type/quality... and it prints beautifully. When I'm in universal apps like Lightroom/iPhoto I have very limited print options and the output is terrible -- almost like draft mode. Apple shows that the HP is an included driver with Tiger with version 3.3. Can I get that version somewhere or is this an HP problem?

The driver you're looking for is part of Hewlett-Packard installer package for Tiger. It's an optional install, so when you install OS X, that's not part of the basic installation.
To install it, insert your Optional Installs disk and locate the Printer Drivers option; click the disclosure triangle next to it to reveal all the optional printer drivers, and select the model(s) you want and be sure all others are de-selected. Proceed to install as normal.
Mulder
If my answer helped solve your problem, please consider awarding some points. Why Reward Points?

Menu options in ALV report

Hi,
Im not getting Menu options in ALV report output. Not even default menu options SYSTEM, HELP Its dispalying as <b>????????????????????????????????</b>. Can someone help me regarding this?
Regards,
amal

Hi Amal,
Check the screen number if you are using a seperate screen and Menu painter.
Thanks and Regards,
Sampath

Component is not getting displayed in process scheduler menu

Hi All,
I have created a project and created/registered a component in that project. I have also added a page which is having a record definition with a record named L_RUNCNTL having two search fields, to this component and configured L_RUNCNTL as search record for this component.
I have registered this component with below details:
Menu Name : PROCESS_SCHEDULER
Bar Name : PROCESS
Folder Name as PT_PROCESS_SCHEDULER
Select “Always Use default local node?” Check box
Permission List : PTPT1000
But after registration, when I open process scheduler menu I dont see this component listed. However, previously I created a component in this project and registered it with same details given above and I could see it in process scheduler menu.
I am surprised why another component registered with same details is not getting displayed in process scheduler menu.

Thanks Michel,
I got this problem resolved. Here is what I did:
Ran portal security sync at the navigation PeopleTools > Portal > Portal Security Sync.
Cleared browser cache, accessed the page again and saw the link was available.

Add value entered in a text box to drop down menu options

hi everyone
i am making a pdf form for medical imaging report. i have a text box where the users enters a number, i want this entered number to appear within a drop down menu options
thanks

Hi Alexander,
I can explain you the details there is a list as you mentioned Newsletter with a column email in it you are right but for your answer ya i can use enforce unique values for that column but if i am using it it gives me an error in the next page what i want
is just beside my text box to say that already registered user.I want that functionality that is what i meant.
Thanks
Eswar
Eswar Chand Teki

All "timeline" menu options are greyed out in my copy of

All "timeline" menu options appear greyed out in my version of Dreamweaver 8. I've tried deleting the cache file and the configuration folder, but without success. There was originaslly some reference to a Javascript error message reference timeline(), since when I've ensured my Java was updated. Any ideas please?

For some reason, the Link > Framemaker document option was also greyed out when I created the project. I had been having trouble with the .xpj file not being created by RH11 and reinstalled TCS5/RH11. Then I created the project and was able to find and open the .xpj file. Like I said, I found then that the Link > Framemaker document option was greyed out and could only import the FM book.
I recreated another project and see that the Link > Framemaker document option is greyed out. I can only use Link > Word document, which is of no use to me. Any suggestions would be welcome!

Menu options in the Tools toolbar in EBS (R12).

Hi,
I would like to create a custom menu option under the Tools toolbar on a specific form. Could someone point me in the direction of any good documentation on how to do this?
Regards
Carl

Developers Guide http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120devg.pdf has info on this, specifically the SPECIAL1 to SPECIAL45 triggers and section APP_SPECIAL: Menu and Toolbar Control.
Regards,
Gareth

Menu Options in responsibilities getting displayed in different language.

Hi,
When we are logging in with the English language in R12, the menu options for some responsibilities are displayed in different languages, which is looking very strange. This is happening to different responsibilities. can any one help me on this.

Hi;
What is exact EBS version
It was working before? If yes what have been changed?
Did you try to compile forms via adadmin?
Please review:
R12 System Administrator Menu is showing English values in any NLS language [ID 563008.1]
Regard
Helios

Invoking Discoverer Report from Zoom Menu Option

HI there
I've seen this on client site but never done it myself. Does anyone have any documentation or guidance on how to set up a form personalization so that the zoom menu option on a form links to a discoverer report, potentially passing parameter values to limit the data? Can forget the parameter side if it's complicated for now as we don't have any full requirements.
Many thanks for any help
Cheers, Kate

Hi
Zoom functionality is very simple just follow the bellow steps
• Enter the Form Personalization form. (M) Help > Diagnostics > Custom Code > Personalize.
• Rule Seq: 10
• Description: Create Menu Item
• Trigger Event: WHEN-NEW-FORM-INSTANCE
• Context: User and set the value to your user name (don't forget to do this for every Rule you define)
• Select the Actions tab
• Actions Seq: 10
• Type: Menu
• Menu Entry: SPECIAL31
• Menu Label: Discoverer Report
• Rule Seq: 30
• Description: Open Discoverer Report
• Trigger Event: SPECIAL31
• Context: User and set the value to your user name
• Actions Seq: 10
• Type: Builtin
• Builtin Type: Launch a Function
• Function Code: XXX---Function name
• Function Name: wil be defaulted from the code
• Save your work and exit all the forms.
Try it out!!!

Problems in Limiting Export option in Web Analysis shortcut menu options

Hi everyone,
i'm trying to limit the shortcut menù option in Web Analysis studio following the instructions in the WA 9.3.1 user guide: "Limiting Web Analysis Studio Shortcut Menu Options" page 293. Exactly i would hyde the Export to some users (an user with Viewer and Expoler permissions).
The problem is that the solution does not work.
Resuming:
First, I have created the WAMenu.xml file, with restrictions for the roles: Viewer and Explorer (using the same tags of the Sample XML File in the guide)
Second, I have modified the WebAnalysis.properties file removing the # ahead this two lines:
"WAStudioMenuControl= C:/Hyperion/Analyzer/conf/WAMenu.xml
ModuleName=WebAnalysisStudio"
and modified the path with the correct location of the XML file.
At last, i have restart the services regarding Workspace and Web Analysis.
But, it does not work. The user can still see the export options in the shortcut menu..I don't understand what is wrong..
I really hope that someone can help me!!

Hi Iain,
thanks for answering.
Unfortunately it doesn't restrict neither in the workspace nor in the WA studio.
I made a lot of attempts, not only with export but also with other option, and there are no changes!!
Do you remember if you made the same steps descripted above, or there is something that i did not make (or made wrong)??
Cheers,
Angelo

When I don't have the BROWSER menu option turned on, the WINDOW menu options are un-accessable by mouse

First of all, I would like to clarify which "menu" is un-accessable.
I'm referring to the menu that regardless of which program, a user can access by either clicking ALT + SPACE or by clicking the top left corner of the window. I'm NOT referring to the FIREFOX menu options, those I am fine with.
Normally, I can just move my mouse to the top left corner and double click to close a program. I used to be able to do that too with firefox 3.6. However, due to the new design, when I click the top left corner, I get the orange Firefox drop down menu. This is because firefox, due to the new update, no longer has an independent window bar that is the norm across most programs. The only way I can get this independent menu bar is to enable the browser menu bar. This however, adds two entire layers of bars, which defeats one of the purposes of the update, to give more viewing space
The Chrome browser also has the tab row on top, however, it doesn't have the issue I brought up. When I click the top left corner of the window, the regular WINDOW menu options pop up.
The reason why this is important to me is due to the fact that I use two monitors. Normally, I can just move my cursor to the top right and close the window without looking for my right hand side monitor, and then double click the top left hand side of my left hand side monitor to close the window. This is because with a 2 monitor set up, the "X" close button is located inconvinently in the middle of my two screens, forcing me to aim for the tiny small red rectangle, which is why I prefere to double click the top left corner; I don't have to aim.
I have long been a loyal user of firefox. Browsers like Chrome and others have been out ranking firefox for a long time, mozilla is only playing catch up here...
While I am glad for the update - better speed due to JaegerMonkey, the added hardware acceleration, the tab groups, and more, if the window menu problem is not resolved soon, this update is going to force me to switch browsers.
I look forward to a fix, or response on how to resolve this issue.
Many thanks,
Still a firefox user... for now

it's possible but there is likely no need to do this. what exactly is wrong with your computer? a simple reinstall of snow leopard on top of your current system will cure many ills and will preserve your data and applications. and many problems can be solved without reinstalling at all.
but if you insist on doing a wipe and install boot from the SL install DVD and start disk utility from utilities menu at the top. erase your hard drive using the erase tab in disk utility. then quit disk utility and proceed with the install. and if you do reinstall I suggest you back up your data first. otherwise it will be completely wiped when you erase your hard drive. and you should always back up anyway.
Message was edited by: V.K.

How to open a menu option in IndesignCS3

IS there any possible way to open a menu option in IndesignCS3 to use the cross-media Export & its sub option xhtml/Digital Edition

Hi Guna,
There is option for invoking those menus. so use this script for export as html.
app.scriptPreferences.version = 5.0;
var outputFile = File('/c/test/test.html');
var document = app.activeDocument;
var scriptPath = Folder.startup + '/Scripts/Export as XHTML/';
var scriptFile = File(scriptPath + 'XHTMLExport.jsxbin');
if (scriptFile.exists) {
scriptFile.open();
var script = scriptFile.read();
scriptFile.close();
eval(script);
var opts = new XHTMLExportOptions();
opts.styleHandling = XHTMLExportOptions.extStyleSheet;
opts.styleSheet = 'template.css';
opts.formatted = true;
app.exportForWebPreferences.gifOptionsInterlaced = true;
var exporter = new XHTMLExporter(scriptFile);
var success = exporter.doExport(document, undefined, opts, outputFile); // check the results:
if(success)
/*if(exporter.outOfDateLinks.length > 0)
alert('Exporting ' + document.name + ' succeeded\nHowever ' + exporter.outOfDateLinks.length + ' links were out of date.');
else
alert('Exporting ' + document.name + ' failed with this error message:\n' + exporter.error.message);

Crystal Report Scheduling Destination Options in Infoview

Hello,
I need some information on the CR scheduling Destination Options available:
The 9 options as per my understanding are:
1. Default Enterprise Location: If you select this option, the instance is saved to the default Business Objects Enterprise location, which is the Output File Repository Server (FRS).
2. Default Inbox: If you select this option, the instance is saved to the inboxes configured on the job server.
3. Default File Location: If you select this option, the instance is saved to the unmanaged disk location configured for the job server.
4. Default FTP Server: If you select this option, the instance is saved to the FTP server configured on the job server.
5. Default Email Recipients: If you select this option the instance is emailed to the email recipients configured on the job server.
6. Specific Inbox: If you select this option you can specify whose inboxes you want to save the instance to.
7. Specific File Location: If you select this option, the instance is saved to the saved to the file location you specify here.
8. Specific FTP Server: If you select this option, you can specify which FTP server you want to save the instance to.
9. Specific Email Recipients: If you select this option, you can specify who you want to email the instance to.
Among the above 9, I have problems with Specific File Location and Specific FTP Server. Can someone please let me know how I can configure my reports to use these two destination.

Hi
If the folder is on the local machine following setting should be configured in destination for Unmanaged Disk
Username:Localmachine hostname\username
password:password of the username.
Here the username would have "Full Control" or "Modify" rights over the drive where desired folder resides and that folder.
If the folder is on the remote machine following settings should be configured in the destination tab.
Username:DomainName\DomainUsername
Password:password of DomainUsername.
DomainUsername should also have "Modify" rights over the drive and the folder.
Is the desired folder present on the SAN drive?
Regards,
Hrishikesh P

TS3716 I have an iPod nano (3rd generation). I've recently dowloaded iCloud. So now when I open iTunes the window is entirely different. And I don't have the previous menu options. I have downloaded audiobooks for years. Is it not supported by iOS5?

I have an iPod nano (3rd generation). I've recently dowloaded iCloud. So now when I open iTunes the window is entirely different. And I don't have the previous menu options. I have downloaded audiobooks for years. Is it not supported by iOS5?
Can I revert back to a previous version? Or must I upgrade to a newer device? Thank you for you expertise!!

I have an iPod nano (3rd generation). I've recently dowloaded iCloud. So now when I open iTunes the window is entirely different. And I don't have the previous menu options. I have downloaded audiobooks for years. Is it not supported by iOS5?
Can I revert back to a previous version? Or must I upgrade to a newer device? Thank you for you expertise!!

Scheduler Menu option in an InfoPackage

Similar Messages

Maybe you are looking for