Scheduling and confirmation problem.

Hi Guys,
I am unable to schedule orders on a Saturday or Sunday. And I am unable to confirm operation steps on these days.
Where do I make this setting? I changed the factory calendar and added saturday and sunday as workdays.
thanks in advance!

Hello,
     Even if you have maintained saturday and sunday as working days,
     it can be considered as a non working day if you have not maintained
     proper shift sequence .Also the working days can be overrided by using
     blank, 0,1 indicators in maintaining intervals .
     Goto Workcenter Scheduling Tab page , capacities header, choose
     intervals and  check whether  0, 1 and blank is maintained for working days,.
     By using this we can override the factory calender.
     S.Nandhakumar

Similar Messages

  • Schedule lines confirmation based on item category(TAN and TANN)

    Hi All,
    We have a problem with the schedule line confirmation in the standard sales order. Suppose if I give the item category as TAN, the schedule lines are confirmed for that line item. If I change the item category from TAN to TANN, then there is no confirmation of the material(No confirmed schedule lines).
    How Item categories influence the schedule lines? Are schedule lines also depend on customer?
    Thanks & Regards,
    Pranil.

    Hi Pranil,
    When you change Item Category then most likely in your case Schedule Line Category is also getting redetermined.
    Schedule Line category is determined by the Combination of Item category and MRP Type of Material.
    Hence please check your Schedule Line category after entering new Item category.
    Open VOV6 and check the Schedule Line Category. In that if Item Rel for Delivery Check Box is Unchecked then it means that
    your schedule line will get unconfirmed.
    Do let me know if this helps.
    Regards,
    Madhukar

  • Firewire 400 and 800 problem ? Need confirmation

    OK, I have been running 2 external Lacie HD's over a USB hub into my MacBook Pro. A couple of weeks ago I decided that I needed more storage so purchased 2 Western Digital MyBook Pro's at 500GB.
    I got these two specifically because I knew they supported Firewire 800 and wanted to take advantage of the high speed connection.
    All is going well until yesterday.... Let me explain my set up. Firstly I am a DJ and use a Firewire Audiophile soundcard from M-Audio, this connects to the 400 port on my MacBook Pro, and the HD's connect to the 800... When I play music I get audio drop outs... I have looked through the forums and I am under the impression that both the 400 and 800 ports on my MacBook Pro run on the same connect, so is this the cause of the audio drop outs ?
    I connect the 2 HD's via USB and have no problems, am I right in thinking that I have wasted good money on getting 2 HD's that I'm not going to be able to use the 800 port with ? When I run the audio through the internal soundcard I get no drop outs !
    Also.... Just to annoy me even more I have a 20" cinema display so if I have use USB I decided to connect the two HD's to this and then to the MacBook Pro, now the problem here is when my MacBook Pro goes to sleep one of the HD's wakes up the MacBook Pro as it has been removed incorrectly ??? Do I now have a problem with one of my USB ports on the cinema screen also ????? I have put my iPod in the port and no problems ?
    Does anyone know how I can solve these problems without having to spend even more money ?
    And can someone confirm if the 400 and 800 ports are on the same connection, if so, whats the point ???
    Thanks
    - Neil

    neil,
    I wouldn't do that right away.. USB audio interfaces are usually at the more consumer end of the market, I don't think it's the best way to go just to solve your problem.
    did you read the part in my post about PCexpress cards that give you a totally new and independent FW800 bus? seriously, I think this is your best bet. these cards first came out when the original series of MBP didn't have FW800 on them (only 400) much to the consternation of video pros.. so 3rd party vendors made a card solution. as I said, they aren't expensive, I would have thought around or under $100 US. connect one of those to your MBP's express slot and your problem is solved. you'll have a powerful, dedicated FW channel just for those FW800 drives you bought. then, your m-audio interface will be fine. and even if you still want to get rid of it and get a better interface, you won't be forced to go to USB which generally means opting for a lower end of the market interface.
    also one other thing.. I don't know what your actual audio i/o needs are. but if you only ever work with stereo out and stereo in, ie, you never need more than 2 physical outputs and 2 physical inputs, then you have other options. the MBP (and in fact all macs) have optical digital audio built in. you can buy a 2in 2out digital to analog/analog to digital converter and connect it to the opticals. then, you'll never need to worry about FW or USB bandwidth ever again, nor will you ever need to think about drivers or compatibility or updates either.
    on my MBP I use logic pro. and on this system, I only ever need a stereo out to hear what I'm working on with good quality.. and when I record actual audio tracks, it's only ever one source at a time, like a mic input or an instrument. so I do not need an interface at all, I use the opticals and I love it. I bought a mindprint trio, not the USB one, but the one that uses optical i/o. it just connects to the same connectors on the MBP that you would connect headphones or a mic, but obviously uses the digital optical signal not analog audio. it sounds really very good. the trio itself is a very handy little box that conveniently lets you do a lot of things to work comfortable when recording. and I just use built-in sound, no drivers needed ever, which is very much a rare relief in the audio world, believe me.
    anyway, hope this helps. and seriously check out a card for FW800, in my opinion it's the best solution to your problem no matter which way you go.

  • How to link Invoice Quantity and Confirmed quantity in schedule line

    Hello,
    I'm working for a report in BW. The user want to compare the invoice quantity to the confirmed quantity in schedule line for a sales order.
    I can't find any table linking these two fields.
    Could you help?
    Thanks a lot
    Jeannie

    Ashish,
    When we link these two tables by Sales Order Number / Item, we would take following result:
    Sales Order    /     Itme     /     Schedule line     /    confirmed quantity   /     actual billed quantity
    1                  /      10        /      1                     /    3                            /              5
    1                /         10      /       2                    /     2                            /             5
    But in fact, for Sales order/itm 1/10, we have only 5 PC billed, not 10.
    When billed 5 PC, I want to despatch it to the Schedule line as 3, 2.
    Regards,
    Jeannie

  • Schedule Line Confirmations after delivery

    I need to be able to delivery a confirmed schedule line, then go back and add quantity to the sales order and confirm the additional quantity.  The system is showing the original schedule (pre-delivery) confirmed and delivered, but the added quantity shows on the schedule lines, but remains unconfirmed, even if I run availability check again.  sch. line cat is CP.  If I add the additional qty as another line item, it confirms.
    Any advice?

    Hi,
    Where are you adding the additional quantity?  Have you tried adding in the Confirmed Quantity Column in the Schedule lines tab?
    Thanks
    Krish.

  • Macbook Air and iBahn problem -- can't get to the log-in page

    This is a new Air (2012) running Mountain Lion 10.8.2.  The location is a Sheraton hotel that uses iBahn for Internet service. I can connect to the wifi network "iBahn," and the Network preference panel shows that my Mac has been successfully assigned an ip number. I click the advanced tab and confirm that iBahn's DNS servers are now listed there. But when I open the browser and try to connect, I cannot get the hotel log-in page. I get a blank window instead. Reloading the window does not help. I have tried the usual remedies: turning wifi off and then back on again, requesting a new DHCP lease, closing and reopening the browser, trying different browsers (Firefox, Chrome), restarting the computer -- none of this works. I have tried shutting down the Mac, restarting, and signing in to a different account on the computer. The symptoms are the same -- a blank page instead of a log-in screen. I have had no trouble connecting with several other wifi networks elsewhere -- including ones that require a browser log-in page. Later the same morning, the wifi at the airport worked just fine.
    Here is where it gets even weirder. I happened to have a second Mac Air with me -- a 2010 model. It logged on to the hotel network with no problems: I opened the browser and the log-in page immediately appeared.
    And weirder: There was also an ethernet cable in the room. When I plugged that into the 2012 Air (with a USB-ethernet adaptor) I could connect with no problem. Finally, I found that I can plug an Airport Express into the ethernet cable and the 2012 Air will connect wirelessly through that.
    What could be wrong here? I assume that iBahn works by obtaining and registering a machine's MAC address. Using wifi, Ibahn was able to get the MAC address from the older 2010 Air and from the Airport Express, but not from the 2012 Air. But the 2012 Air could provide its MAC address through a wired connection. Any advice would be most appreciated. Though I was able to come up with a workaround, I want to ensure that this doesn’t happen elsewhere.

    That's a good question. The page appeared to be blank. I didn't know it was possible to enact the page source view feature in Mountain Lion. That is good to know for the future -- thanks.
    An additional bit of information: a Windows laptop was also able to connect. I wonder if something changed in the Apple wifi firmfare that is incompatible with iBahn.
    Interestingly, similar problems are reported in these forums for iPads and iBahn. And FlyerTalk has a thread about Apple laptops and iBahn: http://www.flyertalk.com/forum/marriott-rewards-including-ritz-carlton/1228814-i bahn-aggravation.html

  • IPod Shuffle 2nd gen and Mac problem/troubleshooting guide

    Ok, warning this is going to be a little long...
    The problem: Brand spanking new out of the box ipod shuffle 2nd gen won't play songs after ipod assistant setup. Flashing green/orange lights. Also will not update or restore (greyed out). Shows up as formatted for Windows. Software and Serial show up as "n/a".
    System specs: Powerbook G4 17inch 1ghz, 1gb RAM, 10.4.9 running iTunes 7.1.1
    Attempted solutions that have NOT worked:
    1) mac retail store visit to genius bar. it restored on mactel machine. worked and played songs. unfortunately resyncing to my library caused ipod to return to problems above immediately.
    2) another mac retail store visit to genius bar, this time with laptop to show them the problem. they told me it was my machine not the shuffle. i explained i am a mac sys admin and that is ridiculous...my machine though a few years old is completely up to date. we then deleted all receipts out of the Library dealing with iTunes and reinstalled iTunes via software update. same problem immediately after the setup assistant. no software version and no choice to update or restore ipod. downloaded the ipod reset utility for mac for 2nd gen shuffle and error message shows "the selected ipod is not supported by this utility". also shuffle icon shows up as generic white ipod. mac genius stumped so they swap out my brand new shuffle for another brand new shuffle.
    3) 2nd shuffle in a week and same problems occur. will not update in iTunes. will not restore in iTunes. will not restore in ipod reset utility. icon shows generic white ipod. i can copy music to it but it will not play, lights flash green and orange.
    4) tried to use disk utility to reformat. erase using MS-DOS, but it says FAT16 instead of FAT32. same problems as above.
    *weird that I can't reformat to FAT32 when selecting the MS-DOS format. I only see FAT16 as a choice. Disk utility should do FAT32 but I can't seem to get it to work on shuffle and i don't have a spare hard drive to test it on. Anyone have any experience reformatting ipods via Disk Utility to windows format? Please share...
    At this point I have access to a mactel book and will attempt to fix it on the newer machine. I will be very upset if it works because there is nothing saying that you need new hardware to use the new shuffle. i also get the usb 1.1 error message but again there is nothing saying you need usb 2.0 for shuffle use.
    if anyone has tried anything different with good results please respond! from my experience this seems to be an issue specifically between older mac ppc machines and the new windows drivers installed on the shuffle. i use windows drives all the time with my mac and there are no problems. however a brand new ipod shuffle 2nd gen out of the box does not seem to like my older machine...even after two reinstalls of itunes! even the reset utility is not working as described....
    any help with this is much appreciated!!!
    Powerbook G4, 1ghz, 1gb RAM, usb 1.1, 17inch Mac OS X (10.4.9)

    Ok here it is, my final post on thoughts on this issue...
    Unfortunately, my guess was correct, there does seem to be a hardware issue related to iTunes 7.1.1 and whether it is on a mactel machine or an older ppc machine.
    I can confirm this because the ipod settings screen on my older PPC powerbook is TOTALLY different than the screen I saw on the newer mactel macbooks, even though the software version says its EXACTLY THE SAME! (iTunes 7.1.1)
    On a mactel macbook, I see the ipod shuffle settings such as "Autofill" etc with the correct icon and software version and serial number.
    On my PPC powerbook, I see a generic white ipod icon (even though the finder shows the correct icon of my 2nd gen shuffle) and the settings tab for the ipod is completely different....the update and restore continued to be grayed out, there is no software version or serial number available as well. This is probably why I am not able to register my ipod shuffle from my machine.
    I did not erase and resync the ipod shuffle to my PPC machine to see if that would allow it to continue working. So far so good. After unmounting, it still plays songs. However, I checked the "manage songs manually" option and added just one more song to the shuffle. I tried to then play that song but it would not play even though it was copied onto the shuffle...I could play it from the ipod via iTunes but not when I was just listening to the shuffle. I confirmed this with the application "PodWorks", the song I copied from my library does NOT show up in the list of songs on my ipod shuffle...however it DOES show up and play in iTunes.
    So I feel pretty stuck right now...
    I can have a working ipod shuffle but NOT from my ipod library. It seems I can only listen to songs off my friends newer machines because for whatever reason, the ipod shuffle DOES NOT WORK with a PPC Powerbook 17inch, 1ghz, 1gb RAM, 10.4.9 running the current latest version of iTunes 7.1.1.
    ***** to be me. Anyone else come to same conclusion?
    If this is real then other users with older macs should not waste their money on the 2nd generation ipod shuffle. Please respond if you have any suggestions or thoughts on this matter.
    Mac OS X (10.4.9)

  • Everytime I try to pay with my cc on paypal, I enter all of my infor and after I press the "review and confirm" button the same page reopens but has erased only my cc #, exp date and security cvv number. What could be wrong?

    b.stats.paypal.com : server does not support RFC 5746, see CVE-2009-3555
    This appears on my error page everytime I try to use my credit card through paypal. I enter all of my info (billing, etc..) and after hitting the "review and confirm" button the same page reappears and has erased my cc number and leaving my name and billing info. What can I do to finish my transaction?

    The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers.<br />
    Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".<br />
    * http://wiki.mozilla.org/Security:Renegotiation
    You may have a problem with the PayPal cookies.
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    See also:
    * http://kb.mozillazine.org/Cookies#Removing_cookies
    * [[Cookies]]
    * [[Enabling and disabling cookies]]

  • BI Schedule and Presenation Server on Different Servers Configuration

    I'm having a problem getting my iBots to run and deliver the information to the catalog with the following configuration:
    2 Presentation Servers on Windows with IIS for NTLM authentication (via a Load Balancer)
    OBIEE Server and Scheduler, and Presenation Server on Solaris (the Presentation Server on Solaris will be turned off)
    The catalog between the 2 Windows Servers are are shared. When I create an iBot on the Windows the request is sent to the Scheduler on Solaris and errors out with the following message:
    [nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Path not found (
    /shared/_ibots/Test Email from UAT)^M
    Error Codes: U9KP7Q94^M
    My question is why does the scheduler send the alert to the Presentation Server on the Solaris box and not the shared Presentation Server with the shared catalog on the Windows Servers. Am I missing something in the configuration?
    Thanks,
    Chuck

    I figured it out. I had to re-run the schconfig utility on UNIX and reconfigured the server from localhost:9710 to the actual server name.

  • How can I delete an Inbound Delivery with HUs and Confirmed TOs?

    Hello Guys,
    My client  has an Inbound delivery created from a PO line item. The goods receipt could be reversed through Vl09N so a 102 material document has been created. The problem now is that he wants to delete the ID (Vl32N) and it still has OTs confirmed with HUs created. Do you think it could be possible to delete this Inbound Delivery? Which would be the correct steps???
    Please ADVICE!

    Hi,
    Not possible to delete the IBD if it has material GR done and confirmed TO.
    \\ Shankar

  • Make my week schedule and then send it to all my team via email in detail

    I just switched to iCal (Calendar as I have ML) and the important feature for me using Outlook before was to Make my week schedule and then send it to all my team via email. They could see my whole week outlined in detail, I could choose data ranges, wether I wanted to send details or titles and then receiving parties could add the meetings they wanted in their calendar as well.
    Am I missing something or ical completely missed the boat on that one? is Apple going Backwards?

    Hi,
    This issue is usually caused by some anti-virus programs, disable the anti-virus program you have on the PC, check if this issue will happen again.
    You may also run Outlook in Safe Mode to determine if it's 3rd-party add-ins related:
    Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
    If there’s no problem viewing html emails in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue. Some security programs may have such add-ins intergrated with Outlook.
    Regards,
    Melon Chen
    TechNet Community Support

  • Pre-Paid SMS alerts and confirmations

    Depending on the device being used, Pre-Paid services can receive the following alerts and confirmations:
    Pre-Paid service activation alerts
    Low credit alerts
    Main balance expiry alerts (four days before expiry)
    Bonus and Plus Pack low balance alerts
    Account deactivation alerts (32 days and eight days before the service is deactivated)
    Change of Pre-Paid offer confirmations
    Scheduled and automatic recharges
    BlackBerry BIS subscription cancellation
    Pre-Paid marketing messages
    Global roaming alerts
    Subscriptions and purchases, including MessageBank
    Mandatory service messages
    Occasional Telstra service messages
    How to opt out of Pre-Paid SMS alerts and confirmations
    While you can opt out, we strongly recommend you don't, as alerts and confirmations are a great way to stay on top of your balance and expiry dates.
    To opt out, text the word 'stop' to 125 8884. This is a free service. You'll receive a confirmation message, but due to scheduling it may take up to 24 hours for all alerts to stop. Note, mandatory SMS notifications will still be sent.
    These may include:
    Mandatory confirmation of self-service options, e.g. recharges, change of offer and Plus Pack purchases
    Pre-Paid marketing offers with a separate opt out
    Mandatory global roaming alerts
    MessageBank notifications
    Occasional Telstra service messages
    If you opt out of Pre-Paid SMS alerts and confirmations, you can still check your balance and expiry dates using your device or online. Find out more about Managing your Pre-Paid service.
    To opt in again, call our Pre-Paid customer service team on 125 8880.
    Change your contract details
    Log in to My Account and edit your 'Personal Details'. Register for My Account to access all your account details in one place, recharge, check your balance, view your usage history, get tax statements and more.
    View SMS messages using a mobile broadband device
    Using USB devices, messages are sent to the Connection Manager. If you're connected using a Wi-Fi hotspot, access messages on your device at http://m.home
    Check your device user manual to learn if it's SMS capable, or follow these steps:
    Step 1
    Connect your Pre-Paid mobile broadband device
    Step 2
    Type http://m.home into your browser
    Step 3
    Click the 'SMS' tab to see if you can view SMS messages

    It doesn't address what I needed help with
    I am in Malaysia with Telstra Long Life so I can receive my banking secure code when necessary from St George. However, it never arrives in time, if at all. So basically the service is useless for me and I have wasted $80. What can be going wrong and how can i ensure I receive a bank secure code sms in time that I can use it before the banking website cuts it off?
    I also cannot see on the My account page where I can get the online help. I think this should always be in the bottom corner of the page as I have spent ages looking for it - depending where you are on Telstra's site, sometimes it is there and sometimes not. VERY confusing.
    Thank you Janet Mills

  • EWA Alert 'rating not defined' and 'download problem' (last week it's fine)

    Hi Friends,
    Please help me with this Alert.
    We have a weekly schedule of EWA report. Lat week the report was fine (green).
    This week it's been grayed out. the erro is Rating not defined and download problem.
    I have run the EWA report and it generated well.
    As per the EWA aler recomendation, i have run the sysprep check (sdcc) in target system. as per the report ihave checked the patches, they seems to be ok.However till last week the report was fine(Green).
    I have checked the RFC connections etc.
    Please check the following error message and help me soon. Since this is a production system.
    Regards
    srini

    hi srini,
    r there any upgrades of patches as now i am experiencing the same problem to my qty and dev servers where i have scheduled ewa reps.
    it says dwnld problem... but i assume the recent cvhanges to our servers patch levels has some thing to do with this..as that is the only changewe had perfromed...i would keep u informed once i check back to this issue.
    let me know if u find any,
    Br,
    Sri
    Award points for helpful answwers

  • What would happen if I added the itouch email to the add accounts on my iphone and confirmed that email address? Would only my iphone get both (itouch and iphone) messages? or will my itouch then also get my iphone messages as well??

    What would happen if I added the itouch email to the add accounts on my iphone and confirmed that email address? Would only my iphone get both (itouch and iphone) messages? or will my itouch then also get my iphone messages as well??

    Thank-you for clarifying third party and for pointing out the potential problems.
    i will either have my phone unlocked by the carrier or get my phone service from them. switching carriers is not essential.
    Thanks agin.
    Cheers!

  • ERROR: Your password and confirmation password do not match. [******] - has been ignored.

    In IE8m 7, 6, this error occurs. Instead of allowing the registrant to correct the mis-matched password, BC submits the form and places this in the submission report: ERROR: Your password and confirmation password do not match. [******] - has been ignored.
    The user doesn't get logged in (obviously), however BC creates a record for this user, but without a password.
    Has anyone else received this error?
    The process happens like this, user completes form, which includes password|confirm password in which the confirm password is mistyped, when "submit" is pressed, the modal window appears indicating a mismatched password. The user clicks "okay" and then the page redirects to the submission page (or to a login screen if the form is set to redirect to a specific page).
    This occured during the test phase and has been replicated!

    Can you please insert that form onto a blank page with no template around it and test it? There seems to be a problem in javascript validation.
    It's this line:
    if(why != ""){alert(why);return false;}
    So, when you click submit, the JS pops the alert if "why" varaible is not an empty string and then returns false, which means the form should not get submitted. However, on your form the browser goes on to this line and submits the form:
    if(submitcount50254 == 0){submitcount50254++;theForm.submit();return false;}
    I can't exactly pinpoint the problem, but it's in that code or some code interfering with that code.
    Cheers,
    -mario

Maybe you are looking for