BI Schedule and Presenation Server on Different Servers Configuration
I'm having a problem getting my iBots to run and deliver the information to the catalog with the following configuration:
2 Presentation Servers on Windows with IIS for NTLM authentication (via a Load Balancer)
OBIEE Server and Scheduler, and Presenation Server on Solaris (the Presentation Server on Solaris will be turned off)
The catalog between the 2 Windows Servers are are shared. When I create an iBot on the Windows the request is sent to the Scheduler on Solaris and errors out with the following message:
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Path not found (
/shared/_ibots/Test Email from UAT)^M
Error Codes: U9KP7Q94^M
My question is why does the scheduler send the alert to the Presentation Server on the Solaris box and not the shared Presentation Server with the shared catalog on the Windows Servers. Am I missing something in the configuration?
Thanks,
Chuck
I figured it out. I had to re-run the schconfig utility on UNIX and reconfigured the server from localhost:9710 to the actual server name.
Similar Messages
-
MOBI with BOE and mobile server on different servers
Hi Experts,
We need to set up a BO MOBI with BOE and Mobile server on two separate servers.
In such a configuration, how does the two servers communicate?
What should be the VAS and VMS server configurations? especially the external hostnames in the files?
We are looking for a non Blackberry(proxy) deployment.
We have installed the software,however the windows services of Authserver and the Job servers are not available in the mobile server instance
Any help would be highly appreciated.I figured it out. I had to re-run the schconfig utility on UNIX and reconfigured the server from localhost:9710 to the actual server name.
-
Development and Quality server using different screen color setting
Hi,
I want to differentiate the Development and Quality server using different screen colors,
How can I set different color logon screen for the different kinds of servers.
Thank You.
Best Regards,
M.Thirumoorthi
[email protected]Hi Thiru moothi,
Please check these links :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/modifyingtheLogon+Page&
Custom Password Change Page
Custom Portal Logon Page
Reward points if handy!
Cheers,
Sandeep
Edited by: Sandeep Tudumu on Mar 26, 2008 7:41 PM -
I'm getting the following errors while trying to provision a PS 2010 PWA on our SharePoint 2010 farm. Our PS instance has been working for a while now, and houses two other PWAs. But today,
when trying to create this one, I get "Failed - see the Application event Log" and the following in the Event Viewer:
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6980
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: server
Description:
Provisioning 'PWA/SDN': To create databases we need dbcreator and securityadmin server roles on servers 'DB1' and 'DB1'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6980</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
<EventRecordID>1676727</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
<Data Name="string1">DB1</Data>
<Data Name="string2">DB1</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6993
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: sharepoint
Description:
Provisioning 'PWA/SDN': Failed to provision databases. An exception occurred: To create databases we need dbcreator and securityadmin server roles on servers..
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6993</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
<EventRecordID>1676728</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
<Data Name="string1">To create databases we need dbcreator and securityadmin server roles on servers.</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6958
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: sharepoint
Description:
Provisioning 'PWA/SDN': Database provisioning failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6958</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
<EventRecordID>1676729</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6971
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: sharepoint
Description:
Failed to provision site PWA/SDN with error: Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision databases. ---> Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and
securityadmin server roles on servers.
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
--- End of inner exception stack trace ---
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6971</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.226Z" />
<EventRecordID>1676730</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
<Data Name="string1">Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision databases. ---> Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and securityadmin
server roles on servers.
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
--- End of inner exception stack trace ---
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)</Data>
</EventData>
</Event>
Anybody ever get any events like this before? I'm not finding much or nothing on Google or on other forums, so I thought I would run it past and see if anyone has experienced anything of a similar
nature. And yes, the farm account obviously has creator/secadmin permissions, at this point of our deployment....
I look forward to any and all feedback. Thanks and good afternoon!I figured out the answer to this myself. For those few who might run into something akin to my error...
During the off-hours of where I work, I re-applied the farm account credentials to all dB server VM SQL services that had the account for a log-on (i.e., MSSQLSERVER, SQLSERVERAGENT, etc.) as well as all SharePoint services on our WFE/App Server VM (a two
server farm is what we host), in that order. Then I rebooted the dB server first, followed by the SharePoint server. Upon coming back, everything was working fine again. I was able to provision a site, no probelm, and it seemed to even be a little snappier
when doing so.
One note: doing this procedure gave me a "One or more services have started or stopped unexpectedly" error in the Health Analyzer, for the SPTimerV4 service. When you get this, simply enter into the item and click on "Reanalyze Now;" this will quickly clear
the error out of the Analyzer, and all should be right with the world! :) -
1 Admin console to manage OSB and SOA installed on different servers
Dear All,
We are planning to have OSB installed on Host 1 and SOA server installed on Host 2. But there will be one Admin console to manage these 2 for the ease of maintenance. When i was trying to install this configuration I had few issues. Hope SOA experts can help me with the configuration.
1)
As SOA and OSB are installed on 2 different host both the servers must have weblogic installed as pre requisite. So I will have
on host 1:
http://host1:7001/console
http://host1:7001/sbconsole
On host 2:
http://host2:7001/console (this is redundant)
http://host2:8001/soa-infra
2) Is it possible to inactivate http://host2:7001/console ? and add SOA server running on host2 to http://host1:7001/console. In the sense, I would like to control the SOA server from host 1.
Issue No :2
When I create a domain on Host 1 I just get the options for OSB and not SOA. It is obvious as SOA is not installed on Host1. but if that is the case, Is it possible to add SOA server running on host2 to host1. Is it going to be a cluster?
Is this configuration seems realistic? Has anyone implemented. Any pointers please.
Reagrds,
AaniHi Aani,
Please go through the blog series -
http://blogs.oracle.com/reynolds/2010/09/installing_an_11g_soa_cluster.html
You may also refer EDG -
http://download.oracle.com/docs/cd/E17904_01/core.1111/e12036/toc.htm
Regards,
Anuj
Edited by: Anuj Dwivedi on Feb 23, 2011 9:14 PM -
Essbase Server and Deployment Server on different boxes
Hi,We're currently testing Hyperion Essbase 7.1.2 and we were wondering if it was possible to have the Essbase (Analytic) Server on one machine and Deployment Server on a different one. At first sight, it seemed so, so we did just that.Now, we'd like to test our setup by signing on through the ESS command line prompt (on the Deployment Server machine) but seem to miss something since the connection ("signon") is refused. The funny thing is that on the machine on which the Essbase Server is installed, we've also installed the Administration Services: through the Administration Console, we can indeed connect to the Deployment Server and interact with it.So my first question is: is our setup possible (that is, having the Deployment and Essbase servers on distinct boxes)?If so, what is the meaning of all the parameters needed for the "signon" command of the ESS command line prompt?Any guidance would be greatly appreciated.Thanks,A. Lepage
Yes, you can configure it that way and we have many customers with that setup.You have to login to the EDS console the first time using the 'default' admin username/password (system/password) and setup a username, with admin privileges, that also is on your Essbase server. Logout, then login with the 'real' username. Select the domain object ('essbase at the top of the tree'), right mouse click and add an analytic server. Type in the name of your Essbase server and it should be added (and you should be able to browse objects on the Essbase server). Finally, select the server, right mouse click and 'sync security'.Tim TowApplied OLAP, Inc
-
Deployment Server and Essbase Server on different boxes
Hi,We're currently testing Hyperion Essbase 7.1.2 and we were wondering if it was possible to have the Essbase (Analytic) Server on one machine and Deployment Server on a different one. At first sight, it seemed so, so we did just that.Now, we'd like to test our setup by signing on through the ESS command line prompt (on the Deployment Server machine) but seem to miss something since the connection ("signon") is refused. The funny thing is that on the machine on which the Essbase Server is installed, we've also installed the Administration Services: through the Administration Console, we can indeed connect to the Deployment Server and interact with it.So my first question is: is our setup possible (that is, having the Deployment and Essbase servers on distinct boxes)?If so, what is the meaning of all the parameters needed for the "signon" command of the ESS command line prompt?Any guidance would be greatly appreciated.Thanks,A. Lepage
I am running Essbase on one Windows server and EAS, EDS, ESS, and EIS on another. Did you create the Analytic Server in EDS and then Sync Security?
-
Window oracle job scheduler and Oracle server scheduler relationship
Hi Experts,
We use oracle 10G R4 in window 2003 server.
From window server panel,we can see OracleJobSchedulerORCAID server is disable. However, I check oracle Jobs from EM.
I can saw schedule jobs are running in there.
What relationship is between window scheduler server and Oracle Schdeler?
As I know we can stop/start window Oracle database serve,r DBconsle EM server and Listener server in window server to control oracle
.Why window oracle schedule does not affect Oracle schdule job?
Thanks Experts to explaining?
JIm10g R4 is not an existing Oracle version. 10.2.0.4 is.
Oracle EM has three different schedulers:
- dbms_job
- dbms_scheduler
- EM's own scheduler. Jobs submitted in the EM scheduler are spawned by the Management Agent.
Sybrand Bakker
Senior Oracle DBA -
Database restore of Content and Cache Server on different SID
Hi Experts,
I am trying to do backup \ restore method, is it the correct way to do.
if not, please suggest me the correct methodology.
if yes, please let me know the procedure to restore the database on different SID
Content Server and cache server was installed on MaxDB 7.6 and build 18
Regards,
Sandeep>
$@ndy wrote:
> I am trying to do backup \ restore method, is it the correct way to do.
Ok... is this supposed to be a question?
Maybe reading the documenation would also help you in this case?
Did you try?
> if not, please suggest me the correct methodology.
So it was indeed a question - but how do you expect us to answer it?
Because you didn't really gave us any alternative to decide on here...
> Content Server and cache server was installed on MaxDB 7.6 and build 18
Are you guys getting any prizes for using the oldest software you can digg up in the service marketplace?
If there is anything I can recommend at this early stage of your question:
Upgrade the database to a recent release, read the documentation/sap notes/WIKI/training content for MaxDB.
regards and a sucessfull new year,
Lars -
MDT Deployment share and SQL Share on different servers
Hello Technet,
I would like help to figure out how to deal with my MDT Deployment share being on a different server than my SQL Share. I am trying to use the MDT Database in MDT 2013 and SQL Server Express 2014. My deployment share is located on a Linux File Server share,
and my MDT Server and SQL Express Server are located on the same Windows Server 2012 VM.My Bootstrap.ini therefore looks like this:
[Settings]
Priority=Default
[Default]
SkipBDDWelcome=YES
DeployRoot=\\192.168.1.10\DeploymentShare$
UserID=user
UserPassword=password
my Customsettings looks like this:
[Settings]
Priority=CSettings, CPackages, CApps, CAdmins, CRoles, Locations, LSettings, LPackages, LApps, LAdmins, LRoles, MMSettings, MMPackages, MMApps, MMAdmins, MMRoles, RSettings, RPackages, RApps, RAdmins, TaskSequenceID,Default
[Default]
CaptureOS=YES
[CSettings]
SQLServer=SQLServer
Instance=SQLEXPRESS
Database=MDT
Netlib=DBNMPNTW
SQLShare=Logs
Table=ComputerSettings
Parameters=UUID, AssetTag, SerialNumber, MacAddress
ParameterCondition=OR
Therefore, the problem is that during winPE Bootup, WinPE connects to the deploymentshare using the provided credentials just fine, and tries to process customsettings. However, I can map a network drive to the SQL Share as seen in the logs by the following
errors:
1.ERROR-Unable to map a network drive to \\SQLServer\Logs
2. ZTI Error opening SQL Connection:[DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist or access is denied.
3.Unable to establish database connection using [CAPPS] properties.
In WinPE, as soon as I hot F8, and use net use \\SQLServer\Logs, the deployment works fine and the properties are read from the database during each section process..
Why is MDT Unable to map the \\SQLServer\Logs , and it requires the manual use of net use? Must I move the deployment share to the same server as my SQL Server Server? Thanks so much.Should work, Don't know why it's failing.
Can you post your full bdd.log file to a public site like OneDrive and share the link?
There are some inconsistencies with your written summary above.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com -
PXE boot issue with DHCP and SCCM server on different subnets
I'm working with a client on the operating system deployment module of SCCM.
Their network configuration currently has a single large subnet for client
computers with a DHCP server on the same subnet. The SCCM subnet is
configured on a seperate subnet with no DHCP server on the subnet. We want to
configure client computers to be able to boot using the PXE client to deploy
OS images to the machines but can not get PXE-boot to work correctly.
Also, the client does not want to make changes to their network
infrastructure routers or switches to remedy this problem. Are there settings
on the DHCP or SCCM servers we can implement to make this work? If so, what
needs to be installed or configured on each server. We currently already have
WDS installed on the SCCM server and the SCCM server is configured as a PXE
Service Point within SCCM. Both WDS and the PXE Service Point seem to be working fine.
Any help would be appreciated.
Thanks,
GaryI am Brazilian,
sorry for wrong english
My DHCP is on linux,
in my own structure VLANS
The system center is on the network
10.0.4.0/24
The machines on the network 10.0.5.0/24
The problem is that the machines that
are not on the same network system center
can not boot
I tried configuring / etc/dhcp3/dhcpd.conf
follows
option vendor-class-identifier "PXEClient";
option bootfile-name "\
\ SMSBOOT \ \ x86 \
\ wdsnbp.com";
option tftp-server-name
"10.0.4.101"; ---->
IP server
But it did not work, anyone know
how to configure? -
Security & Servlet engine and ejb container on different servers
When you have the servlet container and the ejb container on different physical servers,
how is the rmi connection meant to to be done while still maintaining the seucrity
propagation from servlet to ejb tier?
Assume that my user is already authenticated (forms) on the servlet tier. Do we then
create a dedicated connection (InitialContext + url/username/password properties)
to the ejb tier and store this connection in the HttpSession? (basically authenticating
a 2nd time)
OR,
can the servlet container make a generic connection to the ejb container, and pass
the users security context to the ejb tier transparantly?
-Sam
Nick Minutello <[email protected]> wrote:
> Assuming that web container security is being employed, I guess the fundamental question
> is: Is it necessary to create a "connection" (ie. an InitialConext) per user, or
> can a "global" initial context be shared (in the end, the TCP connection is shared
> anyway)?
It doesn't create a 'connection' per user - when you use JNDI authentication (specifying
principal and credentials when constructing InitialContext) it associates security info
with the current thread for the duration of the request. If you cache InitialContext and
use it later on some other thread it will not do anything.
> Does it really matter?
No ;-)
> Thanks,
> Nick
> "Dimitri I. Rakitine" <[email protected]> wrote:
>>Nick Minutello <[email protected]> wrote:
>>
>>
>>> OK, so when I create the InitialContext, I just specify the URL (to call
>>the remote
>>> EJB container). The user ID and credentials are mapped automatically.
>>
>>> I obviously also need to cache the initialContext variable in my HTTPSession
>>object?
>>
>>> What would happen if I had one InitialContext for the whole servlet engine
>>- and
>>> each thread used that. Would the thread (security) context still get passed
>>- or
>>> would the credentials for the original connection get used?
>>
>>If you use web-app security, container will associate security info with
>>the current
>>thread before invoking your servlet. If you do not use it and cache InitialContext,
>>
>>then the current user will always be 'guest' (except for the very first
>>time when
>>application calls 'new InitialContext()' with username/password.
>>
>>
>>> Thankyou.
>>> -Sam
>>
>>
>>> "Vinod Mehra" <[email protected]> wrote:
>>>>
>>>>"Sam the bad cat" <[email protected]> wrote in message
>>>>news:[email protected]...
>>>>>
>>>>>
>>>>> When you have the servlet container and the ejb container on different
>>>>physical servers,
>>>>> how is the rmi connection meant to to be done while still maintaining
>>>>the
>>>>seucrity
>>>>> propagation from servlet to ejb tier?
>>>>>
>>>>> Assume that my user is already authenticated (forms) on the servlet
>>tier.
>>>>Do we then
>>>>> create a dedicated connection (InitialContext + url/username/password
>>>>properties)
>>>>> to the ejb tier and store this connection in the HttpSession? (basically
>>>>authenticating
>>>>> a 2nd time)
>>>>>
>>>>> OR,
>>>>> can the servlet container make a generic connection to the ejb container,
>>>>and pass
>>>>> the users security context to the ejb tier transparantly?
>>>>
>>>>If the user has logged in already, ie the authenticated user is already
>>>>in
>>>>the execute
>>>>thread, the identity should be propgated to the ejb tier transparantly,
>>>>when
>>>>you create the
>>>>new initial context.
>>>>
>>>>--Vinod.
>>>>
>>>>
>>>>>
>>>>> -Sam
>>>>>
>>>>>
>>>>
>>>>
>>
>>--
>>Dimitri
>>
Dimitri
-
MySql database and php code on different servers
I created a table on a MySql database on server A. Now I'm
trying to create
a page to display the contents of the table. I know that the
html code ( and
php) is on a different server (server B). I managed to create
a database
connection however when I try this connection I cannot see
the table I
created. When I click on the Connection name I get the Stored
Procedures,
Tables and View list. I click on the Tables and although I
get a connection
to the server A, no table is displayed.
Am I trying to do something silly here?
any help will be appreciated.
Twanny> Am I trying to do something silly here?
I do it this way all the time. My testing server is local to
my development
LAN, but the MySQL server and database is remote (on the
remote site). To
make this work, you would have to make sure that the remote
server permits
an external connection. If it does, you should be golden.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Twanny" <[email protected]> wrote in message
news:gabbu1$ngv$[email protected]..
>I created a table on a MySql database on server A. Now
I'm trying to create
>a page to display the contents of the table. I know that
the html code (
>and php) is on a different server (server B). I managed
to create a
>database connection however when I try this connection I
cannot see the
>table I created. When I click on the Connection name I
get the Stored
>Procedures, Tables and View list. I click on the Tables
and although I get
>a connection to the server A, no table is displayed.
>
> Am I trying to do something silly here?
>
> any help will be appreciated.
>
>
>
>
> --
> Twanny
> -
PRD and DEV server on different physical locations
Hi
We are in a situation which we planned to host our production and development servers at different geographical locations. Both locations have high speed internet and static IPs.
Kindly advice me how to configure transport management in this scenario.
Our config is ECC6.0 - DB6-WIN2008.
Regards
naveenHello Muthu,
Are these boxes on the same network ?? check by creating a RFC from your DEV to the PRD and test if its successfull.
If the RFC test is successfull then you can proceed with the TMS configuration. It wil not be any problem.
Best Regards
Niraj -
Problems with IISProxy Module (IIS and EP6.0 on different servers)
Hi I am trying to configure IIS 6, I have followed all the instructions outlined in the document "Installing the IIS Proxy Module" and followed the note 715303. When i try to access the the link http://ep6idc91.***.com I get the under construction main page to IIS server.
My IIS server is ep6idc91 and the ep6 server is ep6idc92.
Is my XML config correct?
<ISAPI-config version="1.6">
<filter name="IisProxy filter" authentication="forward" log-level="1" log-flags="0" debug-flags="0" priority="high" extension-url="/scripts/IisProxy.dll" remote-address="skip" />
<extension name="IIsProxy irj" log-level="1" log-flags="0" debug-flags="0" access="filter" />
<mapping name="IIsProxy irj" log-level="1" log-flags="0" debug-flags="0" keep-alive="true" use-continue="true" close-socket="true" close-socket-delay="1000" thread-count="100" max-socket-age="37">
<source access="filter">
<protocol>http</protocol>
<prefix>/irj/</prefix>
</source>
<target>
<protocol>http</protocol>
<host>ep6idc92.****.com</host>
<port>50100</port>
</target>
<compress-types min-size="1024">text/html, text/plain</compress-types>
<protocol-header>ClientProtocol</protocol-header>
</mapping>
<config>
<source access="filter">
<protocol>http</protocol>
<host>ep6idc91.*****.com</host>
<prefix>/IISProxy</prefix>
</source>
</config>
</ISAPI-config>
Message was edited by: Anton AnsalmarHi Anton,
Here is sample IIS file of mine.
<ISAPI-config version="1.6">
<filter name="IisProxy filter" authentication="forward" />
<extension name="IisProxy extension" />
<mapping name="IisProxy samples">
<source>
<protocol>http</protocol>
<prefix>/irj/</prefix>
</source>
<source>
<protocol>http</protocol>
<prefix>/irj</prefix>
<new-prefix>/irj/</new-prefix>
</source>
<source>
<protocol>http</protocol>
<prefix>/portal/</prefix>
<new-prefix>/irj/</new-prefix>
</source>
<source>
<protocol>http</protocol>
<prefix>/logon/</prefix>
</source>
<target>
<protocol>http</protocol>
<host><hostname></host>
<port>50000</port>
</target>
<compress-types>text/html, text/plain</compress-types>
</mapping>
<mapping name="Secure IisProxy samples">
<source>
<protocol>https</protocol>
<prefix>/Hello/</prefix>
</source>
<target>
<protocol>https</protocol>
<host>localhost.your.corp</host>
<port>8443</port>
</target>
<keystore-path>c:\sec\SAPSSLC.pse</keystore-path>
</mapping>
<config>
<source>
<protocol>http</protocol>
<host>localhost</host>
<prefix>/IisProxy</prefix>
</source>
<source>
<protocol>https</protocol>
<host>localhost</host>
<prefix>/IisProxy</prefix>
</source>
</config>
</ISAPI-config>
thanks,
Praveen
Maybe you are looking for
-
Spry Accordion doesn't work properly
I uploaded the site the other night and it worked out just fine. I made a change in some spacing between two words and added a letter to a word. Then all of the sudden it did not work on my next upload. The link to the page is http://www.tc.umn.edu/~
-
Hi Gurus, I've been having a lot of confusion lately about PO (EDI 850) to SO creation in SAP. Our scenario is the customer sends their PO thru ADX (an EDI outsourcing provider), needless to say the flow is: Customer EDI 850 -> ADX -> PO Flat File ->
-
Every time I try to download itunes 10. says unknown publisher. Whats next?
every time I try to download itunes 10.5.8 after waiting up to 50 min. each time it wont download and has the message unknown publisher. Whats the next step?
-
Ordering bumpers using iMac running OS-10.4.11
My phone was bought thru AT&T and my iMac runs OS-10.4.11 and when I connect the iPhone to the computer, it tells me it requires OS-10.5.8; so what can I do? Go 45 miles to an Apple store?
-
How to fix error 2? my phone got it when firming software update while restoring.
How to fix error 2? my phone got it when firming software update while restoring.