Scheduling for certain Equipment only from a maint. plan
Hello,
I have maintained many Equipment as separate line item in a Main. Plan. While scheduling, I donèt see option to select certain Equipment only.
I would like to maintain one or few main. plan, one each for a set of equipment. And then call a few from that one set of equipment. E.g. Total Equipment 120,000. 10 types each 120,000. Thus 10 maint. plans. Call Type I/Maint. Plan 1 and Schedule 1-10,000 on Jun 1. Call Type 2/Main Plan 2 and Schedule 10,001-20,000 on Jul 1 and so on.
Any suggestion please!
There is no way to do equipment wise scheduling in IP30. you have to create separate maintenance plans equipment wise and try using sort field in additional so that you can schedule maintenance plan bit easily.
Similar Messages
-
Maintenance orders are created for FL/equipment only ?
Hi all,
"maintenance orders are created for FL/equipment only".
How can i to understander this sentence, i use t-code: iw31 to create a maintenance order, and the 'Assembly' field can be entered. so how can i to create a maintenance order just for FL/equipment only ?
Thanks and best regards,
Ivy LuHi Praveen,
It's not a message. i got this sentence from the following information:
Q7: When you maintain an assembly in a piece of equipment, is it possible to get maintenance history of the assembly? Do you have to create it as a piece of equipment?
A7: As maintenance orders are created for FL/equipment only, maintenance history can only be tracked at that level, not at assembly level. Assemblies are mere structuring devices to have spare parts linked to an equipment in a structured manner. However, in PM orders, you can mention the assembly along with the FL/Eq. Depending on your reporting needs, an ABAPer could use the 'PM Assembly' field in PM orders.
Best regards,
Ivy Lu -
Permitting user to choose value for a field only from F4
Hi all,
I have the following requirement in table maintenance generator.
There is a custom field in the Z table for which table maintenance is generated to which a search help is attached.
Now in the maintenance screen(SM30) i get a F4 value help for this field and also user can input values in this field. But the requirement is that the user should be able to select values only from F4 and should not be able to input any values.List box is not accepted.
Thanks & Regards,
ShafiqHi Jon,
Thank you once again. The issue is solved using the 'DYNP_VALUES_UPDATE' function module.
I will put the code here for others to refer.
****ON THE SCREEN FLOW LOGIC*****
PROCESS ON VALUE-REQUEST.
FIELD /rb05/wwr_cr_t-mvgr4 MODULE value. "Field on which F4 is required
****MODULE IMPLEMENTATION********
*& Include /RB05/LYBW_WWRTTTI01
DATA:
l_fldval LIKE help_info-fldvalue,
l_repid LIKE sy-repid,
l_repid1 LIKE d020s-prog,
l_dynnr LIKE sy-dynnr,
l_dynnr1 LIKE d020s-dnum,
lt_return LIKE ddshretval OCCURS 1,
ls_return LIKE ddshretval,
ls_dynpread LIKE dynpread,
lt_dynpread LIKE dynpread OCCURS 1,
cnt TYPE i VALUE 0.
MODULE value INPUT
MODULE value INPUT.
GET CURSOR LINE cnt.
l_repid = sy-repid.
l_dynnr = sy-dynnr.
l_repid1 = sy-repid.
l_dynnr1 = sy-dynnr.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = space
fieldname = space
searchhelp = '/B05/OWWRW58'
shlpparam = '/B05/S_WWRW58'
dynpprog = l_repid
dynpnr = l_dynnr
dynprofield = '/RB05/WWR_CR_T-MVGR4'
stepl = 0
value = l_fldval
display = 'F' "Force
TABLES
return_tab = lt_return
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF NOT sy-subrc IS INITIAL.
MESSAGE s398(00) WITH 'Call to Searchhelp failed'
space space space.
EXIT.
ENDIF.
CLEAR : ls_dynpread, lt_dynpread, ls_return.
BREAK-POINT.
READ TABLE lt_return INTO ls_return WITH KEY retfield = '/RB05/WWR_CR_T-MVGR4'.
IF sy-subrc EQ 0.
ls_dynpread-fieldname = '/RB05/WWR_CR_T-MVGR4'.
ls_dynpread-stepl = cnt.
ls_dynpread-fieldvalue = ls_return-fieldval.
APPEND ls_dynpread TO lt_dynpread.
ENDIF.
READ TABLE lt_return INTO ls_return WITH KEY retfield = 'TXTSH'. "Filling the related field
IF sy-subrc EQ 0.
ls_dynpread-fieldname = '/RB05/WWR_CR_T-GB'.
ls_dynpread-stepl = cnt.
ls_dynpread-fieldvalue = ls_return-fieldval.
APPEND ls_dynpread TO lt_dynpread.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = l_repid1
dynumb = l_dynnr1
TABLES
dynpfields = lt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
ENDIF.
ENDMODULE. "value INPUT
P.S: Points alloted.
Message was edited by:
Shafiq -
Disabling cprojects alerts for certain users only
Hi
I need that no email alerts are sent to certain roles/people who have authorizations in cprojects. There are numerous alerts sent as email for any change of dates, thresholds etc. I need to disbale any email being sent in this for certain users.
How can it be done?
Regards
SenthilHi Senthil,
Would you please check the following
Evaluations -> Business Add-Ins (BAdIs) -> Change Alerts from Severities in cProjects
related method is CHANGE_ALERTS_OF_PROJECT, which has a change parameter:
CT_LANGUAGE_OF_RECIPIENT. You can apply your own logic to remove some recipient of the table, so that they do not get the e-mail.
Never tested, please check it out.
Kind regards,
Zhenbo -
User Permissions for certain pages only possible?
I have a client interested in BC but I need to know if they can assign user edit permissions for certain pages to certain users? For example lets say they have pages A B C D E F and they want Tom to be able to edit A B & C but not D E F and they need Sally to be able to edit D E & F but not A B & C. Is this possible with BC?
Hi,
The option is to use and set a workflow for "content approval" to each page.
Site settings -> manage workflows
"You can attach a workflow approval process to any web page or template. When an approval is attached to a web page or template, then all changes must be approved by predesignated users of the system before they go live. To attach a workflow to an item, click on the 'More Options' link and choose a workflow."
Site manager -> pages -> more options
Hope this helps!
-Sidney -
Process chain - schedule for certain days
Hello all,
How can I schedule a process chain that :
-should run 3 times per day
-between the 8th and the 12 workingday of a month
Any sugesstions?
Thank you.Maybe I cna help others with my solution.
So...
I made the chain to run 3 times per day as Debjani advidced me in this thread.
I put 3 jobs, at the hours I wanted, the period daily, without weekends and holidays.
I made a reports that tests the 18-th working day (for example) and some others:
REPORT Z_DAYS.
TABLES : TFACS.
DATA: GI_CURSOR TYPE CURSOR,
GI_TABIX TYPE SY-TABIX,
GT_TFACS TYPE TABLE OF TFACS.
DATA: TEXT(50) TYPE C,
LEN TYPE I,
IND TYPE I,
POS TYPE I,
CNT_ONE TYPE I,
CNT_ZERO TYPE I,
DAY_VAR TYPE I,
IND_VAR(3) TYPE C.
DATA: EVENTID LIKE TBTCJOB-EVENTID.
DATA: EVENTPARM LIKE TBTCJOB-EVENTPARM.
FIELD-SYMBOLS: <GT_TFACS> TYPE TFACS.
DAY_VAR = SY-DATUM+6(2).
OPEN CURSOR GI_CURSOR FOR
*select data for factory calender Germany (01) and year 2009
SELECT * FROM TFACS
WHERE IDENT EQ '01' AND JAHR EQ SY-DATUM+0(4).
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
MOVE 100 TO GI_TABIX.
DO.
FETCH NEXT CURSOR GI_CURSOR
INTO TABLE GT_TFACS
PACKAGE SIZE GI_TABIX.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
*loop on internal table
LOOP AT GT_TFACS ASSIGNING <GT_TFACS>.
TEXT = <GT_TFACS>-MON01.
LEN = STRLEN( TEXT ).
WRITE : 'len' , LEN.
DO LEN TIMES.
IND = SY-INDEX.
POS = SY-TABIX.
IND = IND - 1.
IND_VAR = IND + 1.
WRITE: / 'ind', IND_VAR.
WRITE : 'pos'.
WRITE POS.
IF TEXT+IND(POS) = '1'.
*number of working days increases with 1
CNT_ONE = CNT_ONE + 1.
IF CNT_ONE EQ 8 AND ( DAY_VAR = IND_VAR ).
WRITE : / '8th working day'.
EXIT.
ELSEIF CNT_ONE EQ 9 AND ( DAY_VAR = IND_VAR ).
WRITE : / '9th working day'.
EXIT.
ELSEIF CNT_ONE EQ 10 AND ( DAY_VAR = IND_VAR ).
WRITE : / '10th working day'.
EXIT.
ELSEIF CNT_ONE EQ 11 AND ( DAY_VAR = IND_VAR ).
WRITE : / '11th working day'.
EXIT.
ELSEIF CNT_ONE EQ 17 AND ( DAY_VAR = IND_VAR ).
WRITE : / '17th working day' COLOR 5.
EVENTID = 'ZE_PROD'.
EVENTPARM = 'ZEP_PROD'.
CALL FUNCTION 'RSSM_EVENT_RAISE'
EXPORTING
I_EVENTID = EVENTID
I_EVENTPARM = EVENTPARM
EXCEPTIONS
BAD_EVENTID = 1
EVENTID_DOES_NOT_EXIST = 2
EVENTID_MISSING = 3
RAISE_FAILED = 4
OTHERS = 5.
IF NOT SY-SUBRC IS INITIAL.
WRITE:/ 'EVENT DID NOT START'.
ENDIF.
EXIT.
ELSEIF CNT_ONE EQ 18 AND ( DAY_VAR = IND_VAR ).
WRITE : / '18th working day' COLOR 5.
EVENTID = 'ZE_PROD'.
EVENTPARM = 'ZEP_PROD'.
CALL FUNCTION 'RSSM_EVENT_RAISE'
EXPORTING
I_EVENTID = EVENTID
I_EVENTPARM = EVENTPARM
EXCEPTIONS
BAD_EVENTID = 1
EVENTID_DOES_NOT_EXIST = 2
EVENTID_MISSING = 3
RAISE_FAILED = 4
OTHERS = 5.
IF NOT SY-SUBRC IS INITIAL.
WRITE:/ 'EVENT DID NOT START'.
ENDIF.
EXIT.
ENDIF.
ELSEIF TEXT+IND(POS) = '0'.
*number of holidays days increases with 1
CNT_ZERO = CNT_ZERO + 1.
ENDIF.
ENDDO.
WRITE : /.
WRITE: 'January :' COLOR 1, <GT_TFACS>-MON01.
ENDLOOP.
REFRESH GT_TFACS.
ENDDO.
WRITE / .
WRITE ' The number of working days is :'.
WRITE CNT_ONE COLOR 5.
WRITE / .
WRITE ' The number of holiday days is :'.
WRITE CNT_ZERO COLOR 7.
WRITE : / DAY_VAR.
CLOSE CURSOR GI_CURSOR.
When I am in the 18-th day, I raise an event. I test the year,the calender of the system and the month (January).
This report is called in the chain, as ABAP process.
Then, in my chain , I put a local chain , that starts after it receives the event 'ZE_PROD' and the parameter for it 'ZE_PROD'.
This event with parameter has to be created in SM62.
I hope this helps and thank you all for the advices.
PS: - the factory calender method seems not to be to good, because need special rights to create it and I don' t think it's possible to customize it (because the holiday calender has to be changed and I did not see how).
Edited by: EMI on Jan 27, 2009 4:21 PM -
ALV enable input for certain cells only
Hi,
I wanna to have certain cells in my ALV grid display are ready for input.
I am using FM 'REUSE_ALV_GRID_DISPLAY'.
Appreciate for any help.
Many thanks
AliaHI,
i am sending you a complete woking code ..you just run it and see the option in the output screen..select any of the check box and hit F8..and there it is.. you can modify the code to meet yur need
Reward point if it satisfy your needs..
REPORT ZOBJK1 .
Use of colours in ALV grid (cell, line and column) *
Table
tables : mara.
Type
types : begin of ty_mara,
matnr like mara-matnr,
matkl like mara-matkl,
counter(4) type n,
free_text(15) type c,
color_line(4) type c, " Line color
color_cell type lvc_t_scol, " Cell color
end of ty_mara.
Structures
data : wa_mara type ty_mara,
wa_fieldcat type lvc_s_fcat,
is_layout type lvc_s_layo,
wa_color type lvc_s_scol.
Internal table
data : it_mara type standard table of ty_mara,
it_fieldcat type standard table of lvc_s_fcat,
it_color type table of lvc_s_scol.
Variables
data : okcode like sy-ucomm,
w_alv_grid type ref to cl_gui_alv_grid,
w_docking_container type ref to cl_gui_docking_container.
parameters : p_column as checkbox,
p_line as checkbox,
p_cell as checkbox.
at selection-screen output.
perform get_data.
perform fill_catalog.
if w_docking_container is initial.
perform create_objects.
endif.
*& Form create_objects
form create_objects.
create object w_docking_container
exporting
ratio = 40
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
create object w_alv_grid
exporting
i_parent = w_docking_container.
Field that identify color line in internal table
move 'COLOR_LINE' to is_layout-info_fname.
Field that identify cell color in inetrnal table
move 'COLOR_CELL' to is_layout-ctab_fname.
call method w_alv_grid->set_table_for_first_display
exporting
is_layout = is_layout
changing
it_outtab = it_mara
it_fieldcatalog = it_fieldcat
exceptions
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
others = 4.
endform.
*& Form get_data
form get_data.
select * from mara up to 5 rows.
clear : wa_mara-color_line, wa_mara-color_cell.
move-corresponding mara to wa_mara.
add 1 to wa_mara-counter.
move 'Blabla' to wa_mara-free_text.
if wa_mara-counter = '0002'
and p_line = 'X'.
Color line
move 'C410' to wa_mara-color_line.
elseif wa_mara-counter = '0004'
and p_cell = 'X'.
Color cell
move 'FREE_TEXT' to wa_color-fname.
move '6' to wa_color-color-col.
move '1' to wa_color-color-int.
move '1' to wa_color-color-inv.
append wa_color to it_color.
wa_mara-color_cell[] = it_color[].
endif.
append wa_mara to it_mara.
endselect.
endform.
*& Form fill_catalog
form fill_catalog.
Colour code : *
Colour is a 4-char field where : *
- 1st char = C (color property) *
- 2nd char = color code (from 0 to 7) *
0 = background color *
1 = blue *
2 = gray *
3 = yellow *
4 = blue/gray *
5 = green *
6 = red *
7 = orange *
- 3rd char = intensified (0=off, 1=on) *
- 4th char = inverse display (0=off, 1=on) *
Colour overwriting priority : *
1. Line *
2. Cell *
3. Column *
data : w_position type i value '1'.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'MATNR' to wa_fieldcat-fieldname.
move 'MARA' to wa_fieldcat-ref_table.
move 'MATNR' to wa_fieldcat-ref_field.
append wa_fieldcat to it_fieldcat.
add 1 to w_position.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'MATKL' to wa_fieldcat-fieldname.
move 'MARA' to wa_fieldcat-ref_table.
move 'MATKL' to wa_fieldcat-ref_field.
Color column
if p_column = 'X'.
move 'C610' to wa_fieldcat-emphasize.
endif.
append wa_fieldcat to it_fieldcat.
add 1 to w_position.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'COUNTER' to wa_fieldcat-fieldname.
move 'N' to wa_fieldcat-inttype.
move '4' to wa_fieldcat-intlen.
move 'Counter' to wa_fieldcat-coltext.
append wa_fieldcat to it_fieldcat.
add 1 to w_position.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'FREE_TEXT' to wa_fieldcat-fieldname.
move 'C' to wa_fieldcat-inttype.
move '20' to wa_fieldcat-intlen.
move 'Text' to wa_fieldcat-coltext.
append wa_fieldcat to it_fieldcat.
endform. -
How to create Subscription Schedule for a Contract created from Sales Order
Hi Gurus,
Need help in creating subscription contracts from Sales Orders.
We know that Service Contract is created from Sales Orders by adding covered item and service item as two lines in a Sales Order.
1. Does anyone know how to a create Subcription Contract by adding single item or BOM item(Model) to a Sales Order?
2. Can we have a BOM item created as Subcription item and reference this to the Service Item in the Sales Order, so that we get the Service Contract created with the BOM item as Covered line.
3. Whenever we create the Service Contracts from Sales Orders, the Billing Schedule Level is set to 'Top Level'. Can we get this changed to 'Equal Amount' by using any profile options.
Please advise as we are in a critial design phase and need to make a decision quickly.
Thanks,
SidHi Mani,
I have a similar requirement but i need to transfer the values to the same page... what then. I have seen the developers giude and the example shows how to tansfer values to another page but no clues what so ever if i have to transfer them to the same page different region. Do u have any suggestions ....
Regards,
Amit. -
Update statement conditioned on two columns but for certain values only
Hi this is my my sample data:
with Table_1
as
select '20:00' incident_time, 'WEDNESDAY' Day, 'N' Weekend, '' Weekend_Alt from dual
union all
select '18:00' incident_time, 'SATURDAY' Day, 'Y' Weekend, '' Weekend_Alt from dual
union all
select '19:00' incident_time, 'FRIDAY' Day, 'N' Weekend, '' Weekend_Alt from dual
union all
select '11:00' incident_time, 'FRIDAY' Day, 'N' Weekend, '' Weekend_Alt from dual
select *
from Table_1I want to perform an update as seen below
Update Table_1 tt
SET Weekend_Alt = (CASE WHEN TO_CHAR(tt.day,'fmDAY') IN ('FRIDAY AND TIME >= 19:00','SATURDAY','SUNDAY') THEN 'Y' ELSE 'N' END)
I realize the syntax is wrong but just want to give you an idea of what I want to achieve.Final Result should look something like this:
with Table_1
as
select '20:00' incident_time, 'WEDNESDAY' Day, 'N' Weekend, 'N' Weekend_Alt from dual
union all
select '18:00' incident_time, 'SATURDAY' Day, 'Y' Weekend, 'Y' Weekend_Alt from dual
union all
select '19:00' incident_time, 'FRIDAY' Day, 'N' Weekend, 'Y' Weekend_Alt from dual
union all
select '11:00' incident_time, 'FRIDAY' Day, 'N' Weekend, 'N' Weekend_Alt from dual
select *
from Table_1Thanks in advance!!!
Banner:
Oracle Database 11g Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
"CORE 11.2.0.2.0 Production"
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Productionwith Table_1
as
select to_date('01-JUL-2009 20:10','DD-MON-YYYY HH24:MI') incident_date from dual
union all
select to_date('23-MAR-2010 12:12','DD-MON-YYYY HH24:MI') incident_date from dual
union all
select to_date('25-JUL-2010 23:30','DD-MON-YYYY HH24:MI') incident_datet from dual
union all
select to_date('09-JAN-2010 08:30','DD-MON-YYYY HH24:MI') incident_date from dual
union all
select to_date('08-JAN-2010 08:30','DD-MON-YYYY HH24:MI') incident_date from dual
union all
select to_date('08-JAN-2010 20:30','DD-MON-YYYY HH24:MI') incident_date from dual
union all
select to_date('26-JUL-2010 00:00','DD-MON-YYYY HH24:MI') incident_datet from dual
select incident_date, to_char(incident_date,'Day'),
case
when incident_date between trunc(incident_date,'IW') + 4 + 19/24
and trunc(incident_date,'IW') + 7
then 'Y' else 'N'
end
from Table_1 t;So your update would be
update table_1 tt
set weekend_alt =
case
when incident_date between trunc(incident_date,'IW') + 4 + 19/24
and trunc(incident_date,'IW') + 7
then 'Y' else 'N'
end;But it does lead me to question whether it is a good idea to store this derived data
Edited by: 3360 on Nov 8, 2011 10:14 AM -
How can I change the output for certain columns only?
I am finding it hard to explain my issue , as I am very green when it comes to database, but I will try my best.
I am writing a script that will query a database and output 5 columns, the first and last name of a student, the last name of their adviser, their enrollment status, and how many years they have been enrolled.
I have the student's enrollment date and graduation date stored, however not all students have graduated, so that field is null for some students.
my question is, how can I use their enrollment status of graduated to change the calculation of how long they were enrolled for.
This is what I have so far :
SELECT
STUDENTS.NameFirstS,
STUDENTS.NameLastS,
STUDENTS.EnrollStatus,
TRUNC((MONTHS_BETWEEN(SYSDATE, STUDENTS.EnrollDate))/12) as Years,
FACULTY.NameLast
FROM
STUDENTS,
FACULTY
WHERE
STUDENTS.ThesisAdvisor = FACULTY.FacultyId
I'm not sure where to go form here, like I said, I am very new. Thank You in advance!Thank you for the warm welcome :)
My Oracle Version is 11.2.0.1.0
Here is the create statement I used for the table.
CREATE TABLE STUDENTS
(StudentId NUMBER(9)
,NameFirstS VARCHAR(255) NOT NULL
,NameMiddleS VARCHAR(255)
,NameLastS VARCHAR(255) NOT NULL
,PhoneHome NUMBER(10) NOT NULL
,PhoneOffice NUMBER(10)
,HomeCity VARCHAR(255) NOT NULL
,HomeState VARCHAR(255) NOT NULL
,HomeStreet VARCHAR(255) NOT NULL
,EnrollDate DATE NOT NULL
,EnrollStatus VARCHAR(255) NOT NULL
,StudyArea VARCHAR(255) NOT NULL
,SpouseNameFirst VARCHAR(255)
,SpouseNameLast VARCHAR(255)
,ThesisTitle VARCHAR(255) NOT NULL
,ThesisInternational VARCHAR(255)
,ConvocationDate DATE
,ThesisAdvisor NUMBER(9) NOT NULL
,Mentor NUMBER(9) NOT NULL
,CONSTRAINT STUDENTS_pk PRIMARY KEY (StudentId)
,CONSTRAINT STUDENTS_Mentor_fk FOREIGN KEY (Mentor)
REFERENCES FACULTY(FacultyId)
,CONSTRAINT STUDENTS_ThesisAdvisor_fk FOREIGN KEY (ThesisAdvisor)
REFERENCES FACULTY(FacultyId)
And here is 2 inserts of random data
INSERT INTO STUDENTS (StudentId, NameFirstS, NameMiddleS, NameLastS, PhoneHome, PhoneOffice, HomeCity, HomeState
, HomeStreet, EnrollDate, EnrollStatus, StudyArea, ThesisTitle, ConvocationDate, ThesisAdvisor, Mentor)
VALUES(778506631
, 'John'
, 'Jacob'
, 'Smith'
, 3125551234
, 5182293313
, 'Wilksbury'
, 'Texas'
, '14 Main Road'
, TO_DATE('04-SEP-2003', 'DD-MON-YYYY')
, 'Graduated'
, 'Physics'
, 'Why Move'
, TO_DATE('07-JUL-2008', 'DD-MON-YYYY')
, 157928743
, 997569876
INSERT INTO STUDENTS (StudentId, NameFirstS, NameLastS, PhoneHome, HomeCity, HomeState, HomeStreet
, EnrollDate, EnrollStatus, StudyArea, SpouseNameFirst, SpouseNameLast, ThesisTitle, ThesisInternational, ThesisAdvisor, Mentor)
VALUES(251321188
, 'Larry'
, 'Timsfield'
, 2815551200
, 'Johnsburg'
, 'Florida'
, '223 Route 54'
, TO_DATE('09-SEP-2010', 'DD-MON-YYYY')
, 'Full Time'
, 'Medicine'
, 'Wanda'
, 'Timsfield'
, 'Cut Me Mick'
, 'Yes'
, 997569876
, 101325587
I don't know how to format them like you did in your reply, so they look like a quote, so I hope that just pasting them in is okay. -
IPod plays certain songs only from Mac
Hi everybody,
I've never went into problems with my 1st generation iPod but I'm in a little trouble now.
I've put some AAC made by iTunes from a cd of mine inside the iPod and they were copied correctly.
When it comes to play them from the iPod connected to the Mac, everything is ok; the only thing wrong is that if I try do the very same thing once sconnected, the player refuses to play the tracks.
Strangely enough, it happens only with this album, the others behave perfectly !!
What can I do ?
Many thanks.Hi Ricacardo,
You might want to look at Knowledge Base Document #300766 on iPod: Troubleshooting songs and audiobooks that won't play and Knowledge Base Document #93867 on Some Songs in iTunes Won't Copy to iPod.
Jon -
Possible to hide Grouping name for certain tracks only?
I am organising my classical music library and using the Grouping column with good success.
However, it would be visually better to be able to hide the Grouping name for the subsequent movements of a piece. For example in a Dvorak album:
..Grouping*.............................*Name
1.Cello Concerto in B minor.1.Allegro
2...........................................2.Adagio
3...........................................3.Allegro moderato - Finale
4.New World Symphony........1.Adagio
5...........................................2.Largo
6...........................................3.Scherzo
7...........................................4.Allegro con fuocoI have never used the shuffle by groupings feature, but I would think it would be affected.
You need to experiment and decide how important shuffle by grouping is compared to the appearance in the iTunes Library.
iTunes is not good at dealing with classical music and you will find a lot of discussion of the problem with Google.
Here is an example:
http://www.till.com/blog/archives/2008/09/classical_itune.html -
I am part of a family plan (not the owner) and my boyfriend is part of a family plan, also not the owner of it. We would like to transfer both of our phones out of our family plans and do our own share plan together. What is the process for this??
Have each of the account owners contact Verizon to let them know that you will be doing an AOL on your lines. Then you call Verizon and explain what you want to do. Just that easy. But understand you'll have to get the new Share everything plan.
-
Text Mandatory only for Certain Materials in Sales Order
Is there anyway so that I can make certain item text mandatory only for certain materials?
I tried creating new item category group and new item category. And then create new Text procedure making this text mandatory and assigning to this new item category.
But there are lot of different types of item categories assigned. So it does not look good to create new item category for each and everyone for this new item category group and material.
Please guide me how to make the document incomplete for certain materials only when one text is not filled at item level
Thanks in advanceHi,
what you tried is correct and that is been followed in most of my projects wherever I worked. That is the best way recommended also.
If you try with incompletion procedures for item category also, you will endup doing multiple item categories anyway....
First when I looked at the subject line, even before I opened your POSTING, I got the same resolution as you did....May be the optimal one but, not sure, if something else is possible other than by doing user exit.
Regards -
How to copy data for certain member from one dimension to another dimension
Dear ,
I want to copy data for certain member ("511102") from one dimension to another combinations of dimensions ,
I have the following combinations for "511102" :
_("Budget2012","FY12","Working.V01","SAR","BegBalance","1011","G_10","custom Grades")_
I want to copy "511102" to "salary"
-salary have the following dimensions :
_("Budget2012","FY12","Working.V01","SAR","BegBalance","General group","All grades","General Employees")_
, I don't know if I could do it by datacopy of cross dimensional , But I don't HOW >>>
Thanks in advanceFIX("Budget2012","FY12","Working.V01","SAR","BegBalance","General group","All grades","General Employees")
"salary"="511102"->"1011"->"G_10"->"custom Grades";
ENDFIX
or
FIX("Budget2012","FY12","Working.V01","SAR","BegBalance")
DATACOPY "511102"->"1011"->"G_10"->"custom Grades" to "salary"->"General group"->"All grades"->"General Employees";
ENDFIX
Key thing in datacopy is to place the dimensions in cross dimension in the same order. Both sides (before and after "TO") should have equal number of dimension members specified.
Cheers,
Alp
Maybe you are looking for
-
IChat video call not working.
Hi there, Please kindly advise on my ichat video issue. ichat indicated this computer does not support video chat. We have two mac connected to a router named Ericsson Broadband and the other mac ichat video is working but my isn't working and my mac
-
Namespace issue with oracg generated classes
Hi, I'm having problems generating classes with oracg from the Java Xdk from an XML schema. All classes are generated, but do not compile. In some sources (mostly in the type classes) "public void addSomething(null.Something theSomething)" is generat
-
I have loads of music in iTunes. Just brought a mac..where is music?
I have used a pc and already have an iTunes account with loads of music on it I have moved abroad and brought a mac. When I open iTunes I was expecting all my music to be there? Do I need to import it somehow? I have read lots of posts where people h
-
Pipeline steps in SXMB_MONI
Hi, In SXMB_MONI i need a pipeline steps in left side of the XML message. Please guide me how to do that. Regards, sasi.
-
How to Change the name of the Job scheduled in the background.
Hi, I hava a program that has can run many reports based on the selection screen report selected. and this program runs in the background. When I run the program in the background for seprate report selected in the selection screen.. the background