Scheduling reports to run with Report Server

How do I schedule a report to run with Report Server.... OR Where can I find information about setting up a schedule for reports with Report Server?
Thanx in advance.
~Vannette

look in the online help for the schedule parameter in the reports command line. also have a look at the reports queue manager new job options.

Similar Messages

  • Add does not run with sql server 2008

    Hi all,
    My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
    On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
    we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
    is installed.
    Help needed.
    Thanking you
    Pradnya

    Hi Use this
    Dim i as integer
    i=oCompany.Connect()
    if i<> 0 Then
    msgbox(ocompany.GetLastErrorDescription ())
    end if
    the you will get the error description also use try catch wherever necessary
    Alternatively you can use
    Dim SboGuiApi As SAPbouiCOM.SboGuiApi
    Dim sConnectionString As String
    Set SboGuiApi = New SAPbouiCOM.SboGuiApi
    sConnectionString = Command
    SboGuiApi.Connect sConnectionString
    Set SBO_Application = SboGuiApi.GetApplication()
    Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
      ocompany = SBO_Application.Company.GetDICompany
    HTH,
    Atul

  • [b]Problems to Print a Report made it with Report Builder Dev. 2k[/b]

    I have a report made it with Report Builder and in the screen preview all the information is complete and fine; however when I print it, some letters disappear on the left side of the fiel. I don't know How to correct this. I tried with the properties that allows to fields
    expand them in an horizontal and vertical way. But it doesn't work. How can I get a WYSWYG ("What you see What you get") in a print form?... Could be possible
    that it is a Report Builder bug and How I can correct this? or maybe I'm creating the reports in a wrong way... I need help...
    Thank you very much

    Godis-Tei wrote:
    Hi Forum,
    Thanks for the various contributions that are helping my experience with oracle.These are my two current problems:
    1. Assuming I have built a page of payroll for 40 workers that repeats monthly. Is there a way of copying the previous page for last month into this month? Or, do I have to build a new page on the same table and update it?
    2. Please, what procedure should I follow to print a form or a report from the application page?Please ask only ONE question per thread. These issues do not appear to be related in any way, so so the thread is likely to end up an unmanageable, confusing mess.
    Close this thread and open 2 new ones, one for each question.

  • Weblogic, Forms and reports 11g - help with report server

    Hi Everyone
    To start with i'm very new to forms and reports (3 months!!!) so my question may sound a bit silly.
    At the moment we have 10 apps using forms and about 6 of them using reports. All the reports get run from the forms. We are upgrading forms and reports from 10g to 11g and the dev teams are not willing to recode the forms to pick up ENVID's etc. i have 1 reports server running and have configured to run one of the apps reports but my question is how do i get the other apps to run under that report server, can this be done.
    I have thought about creating a report sever for each app but not sure if this is best practice and a bit over kill.
    Would i be wrong to create a report server for each app.
    Thanks
    Edited by: Zantie on May 11, 2011 2:27 PM

    Hi,
    If both apps are using the same middle-tier home, then forms built-in run_report_object should submit reports to the this url. i.e <protocol://<mid-tier or LBR>:<port>/reports/rwservlet?. Assuming you are using the in-process reports server no need to specify reports_server parameter. Also if the envid is missing, you can move all the .rdf or .rep files to the default reports server directory $mid-tier_home/reports/samples/demo directory.
    Leonard

  • Imported Crystal Reports from CE10 with specified server group problem

    We have Crystal Reports on a CE10 Environment where we have assigned and scheduled them to different server groups in order to throttle workload and maintain customer service levels.  When importing these reports to BO XI 3.1, it appears to bring over the server group with the report (it's visible in the CMC) but when a normal user goes to do a schedule on the report in InfoView, it fails, unless they go to the Scheduling Server Group' area on the report schedule options and select 'use first available server'.  All of the other options were greyed out.  If I log in as an account that is the member of the 'Administrators' group, it shows the option 'Only user servers belonging to the selected group'.  Am I missing a permission/security setting?  The user doing the scheduling has the 'Schedule' security profile on the report.

    Must grant user rights to view server groups and servers in order to allow for scheduling to specific server groups or servers

  • Crystal Reports 10 Compatibility with Windows Server 2008 R2

    Hello I'm a developer and I'm in the process of migrating my ASP.NET application that uses crystal reports 10 from a win2k3 server to a win2k8 R2 server.
    First of all, is CR 10 compatible with windows server 2008 R2?
    The application is up and running on the new server, the only thing that fails is the reports. I get the following error message:
    Error in file ....c:\windows\temp\{TEMP_FILE_NAME}.rtp
    Failed to create the Crystal Query Engine.
    This occurs at report.load(..)
    I did already grant NETWORK SERVICE access to Temp and ran the CR redistribute msi that came with Visual Studio 2008 - CRRedist2008_x64.msi.
    Please help

    YESSSS!!!! IT WORKS!!
    Finally, after days of installing, uninstalling, setting permissions, crawling through process monitor output.. I finally have it working.
    For anyone with the same problem, here's what worked for me:
    I had to use the 32-bit runtime
    set application pool to 32-bit
    grant the following permissions based on the different errors listed below:
    Error in File UNKNOWN.RPT
    - Give NETWORK SERVICE list permission on C: Drive, run a report, then remove NETWORK SERVICE from the list (weird, but works, and I had to do this every single time I setup Crystal Reports on a new computer so far).
    - You might also have to set correct permission on 'Temp' if u get still get this error.
    Error in file ....c:\windows\temp.rtp
    Failed to create the Crystal Query Engine
    - Grant correct permission to C:\Program Files (x86)\Business Objects (your path may vary)
    (For me it was giving Users Modify permission to Business Objects folder)
    Unknown Query Engine ErrorError in File C:\Windows\TEMP\.rpt:
    Unknown Query Engine Error
    - Switch application pool to 32-bit.
    - Make sure Crystal Reports Runtime is 32-bit (CRRedist2008_x86.msi)
    Thank you guys so much for all your help and sticking through this with me.

  • Crystal Report 8.5 with SQL SERVER 2005 problems

    Post Author: AREVA
    CA Forum: Data Connectivity and SQL
    Hi All !We have some problems with Crystal Reports version 8.5 with SQL Server 2005: 1) When we want to generate a report (using data in SQL Server 2005) we have a popup message error : "impossible to loaded pdssql.dll".2) If we want to use SQL Server 2005, which Crystal Reports version we must used ? Is there any restrictions with this connectivity with 8.5 version ?Please, let me known, all informations about SQL Server 2005 and Crystal Report 8.5.Thanks for all !Best regards Anthony

    Hello Kamlesh,
    There is no expectation that the ActiveX viewer (RDC?) from CR8.5 will work in any version of Visual Studio .NET. There is also no expectation that the ActiveX viewer from CR8.5 will work on a machine with a 64 bit operating system.
    You're using VS2008. You should migrate to the bundled edition of CR for VS2008 (v10.5), the ReportDocument object, and the .NET Windows form viewer or Web form viewer.
    Sincerely,
    Dan Kelleher

  • Formula for report to run with data of only current day

    I need a report that whenever refreshed it run with data for only the current day. It is for knowing how many checks were performed from the start of the current day to the time the report runs. Iu2019ve tried to use the select expert but I guess I need to use a formula in it.
    Thanks,
    Andreia

    Andreia,
    I think you've posted this into the wrong forum!
    -Anil

  • Reports not running on Application Server 10g Release 3 (10.1.3)

    Hi,
    I've downloaded Application Server 10g Release 3 (10.1.3) from Oracle website and installed on my system in order configure report server and to run JSP web reports. But i'm unable to run web reports using the above version of Application server.
    While checking the componets included in above version of Application server(10.1.3), I found that it doesn't have "Forms and Reports services" included in it.
    Could anybody please confirm if its the reason why i'm not able to run the reports. What version of Application server should i download in order to configure and Run Web Reports?
    I would appreciate your expert advice on this.
    Thanks
    Ratheesh

    What version
    of Application server should i download in order to
    configure and Run Web Reports?10.1.2.0.2
    http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
    See also Re: 10.1.3 - Reports Server?

  • Reports not running in development server - business object

    Hi friends,
    my all reports running in production server but some of are not running in develpment server.
    end users are accessing reports through URL ,
    what should be the problem ?
    any suggestion is appreciate.
    thanks.

    HI,
    Below is the URI i m getting.
    http://xyz.com:8080/businessobjects/enterprise115/admin/en/go.jviewer?init=connect&id=8479279&advprint=actx&nologon=viewerlogonform.csp&token=WFF999999SAS758%2EENT%2EWFB%2EBANK%2ECORP%3A6400%4018015619JNCzmr4fAbKrUTKT18014715JzUtK5C3UTCDAxoXONEOFF&relogon=WCSLOGONTOKEN
    "The database logon information for this report is either incomplete or incorrect."
    any help is appreciate.
    Thanks.

  • Cannot get report to run using Report Server

    I have installed, compiled and now have running the reports server (6i patch5a) on Linux 7.0. I can view the queue, but when I run rwcli60 to try out a report, it always complains about an invalid printer, even though one is defined (but not connected to the machine currently), and if I try destype=pdf, it just hangs for a long while, then writes errors about the Oracle Toolkit.
    Is there anything you might have (papers etc) that helps troubleshoot using the report server? (we are not using 9ias currently).
    Any help would be greatly appreciated!!
    Monte Malenke

    color <> 'WHITE' was causing the error

  • Report keeps running in Report Manager

    Hi,
    I have a report with around 300,000 records and has 25 columns. It has 5 row groups, toggling and sorting set on it which dynamically gets changed based on report parameters. So, based on what parameter is selected the 5 columns gets interchanged and accordingly
    grouping, sorting and toggling on them. We have also heavily used many expressions, subtotals and total on the report. In short it is a very complex report.
    I have couple of questions -
    1) ExecutionLog is displaying the RenderingTime but still report output is not displayed on ReportManager?
    2) I feel it is getting stuck while rendering so how to troubleshoot the same?
    Any other suggestion to fix the issue would be highly appreciated.
    Below are the stats from ExecutionLog table -
    ItemPath
    ItemAction
    TimeStart
    TimeEnd
    TimeDataRetrieval
    TimeProcessing
    TimeRendering
    Status
    ByteCount
    RowCount
    DataSetPath
    Execute
    11/6/14 12:58 AM
    11/6/14 1:01 AM
    27475
    78054
    0
    rsSuccess
    0
    283090
    ReportPath 
    Render
    11/6/14 12:58 AM
    11/6/14 1:01 AM
    105552
    16570
    82121
    rsSuccess
    123245805
    283090
    AdditonalInfo column stats below -
    <AdditionalInfo>
      <ProcessingEngine>2</ProcessingEngine>
      <ScalabilityTime>
        <Pagination>0</Pagination>
        <Processing>10021</Processing>
      </ScalabilityTime>
      <EstimatedMemoryUsageKB>
        <Pagination>15931</Pagination>
        <Processing>1400415</Processing>
      </EstimatedMemoryUsageKB>
      <DataExtension>
        <SQL>1</SQL>
      </DataExtension>
    </AdditionalInfo>

    Hi M_MAG,
    According to your description, you have a large complex report which takes too long to render on Report Manager. Right?
    In this scenario, it takes long time one data retrieval and processing, you can take reference to the articles below to optimize you report:
    Troubleshooting Reports: Report Performance
    Reporting Services Performance and Optimization
    Also this long data retrieval and processing time may cause the time out issue, so we suggest you adjust timeouts in configuration files:
    C:\Program Files\Microsoft SQL Server\MSSQL.2\ReportingServices\ReportManager\Web.config C:\Program Files\Microsoft SQL Server\MSSQL.2\Reporting Services\ReportServer\Web.config
    <httpRuntime executionTimeout="18000"/>
    C:\Program Files\Microsoft SQL Server\MSSQL.2\Reporting Services\ReportServer\rsreportserver.config
    <Add Key="SQLCommandTimeoutSeconds" Value="18000"/>
    <Add Key="MaxActiveReqForOneUser" Value="20"/>
    <Add Key="DatabaseQueryTimeout" Value="18000" />
    Also:
    Report Manager->Site settings->Report Execution Timeout->select “do not timeout report execution”. And we suggest you cache your report on Report Manager. Please refer to the link below:
    Caching SSRS Reports for Performance
    Reference:
    Setting Time-out Values for Report and Shared Dataset Processing (SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Does end user need Crystal Reports to run saved reports

    This seems like such a simple question, but I am unable to find the answer in the documentation, so here it goes.
    On UCCX does end user need Crystal Reports to run save custom reports that were created using Crystal Reports

    Hi
    No, UCCX comes with the 'Historical Reporting Client' which contains a Crystal runtime that renders the reports.
    You only need Crystal Pro if you wish to author new reports for the system.
    Aaron HarrisonPrincipal Engineer at Logicalis UK
    Please rate helpful posts...

  • HOWTO: Control Printer Attributes for a Report at Run Time Reports 6i

    HOWTO: Control Printer Attributes for a Report at Run Time
    Like page width , height etc
    my problem is i had installed a printer and it is set for
    printing different reports ( like invoice slips , legal size ,
    A3 etc ) each time i have to manually set the page settup from
    printer folder .instead if there is an option to set the printer
    attributes from Reports 6i it is great
    rajesh

    All the Printer Setup(Page Height and Page Width) must be set in
    the Reprot Program. These can be set at the Layout-Main Section
    in the Object Navigator.
    hth

  • Report Permissions -- Run existing reports but cannot read/create report

    Hey everyone,
    Hopefully this is a simple question. I'm trying to create a user in the RPD which has permission to run all the existing reports in a Shared folder and is able to change the filter criteria on those existing reports, however, the user cannot create any new reports or even view the subject areas.
    I thought this would be a simple task, i.e. give user execute on the existing reports but no read permission on the subject areas, however, when I take away his read permission from the subject areas, he is unable to run the reports anymore.
    Does anyone know how I can accomplish this?
    Thanks in Advance!
    -Joe

    Joe,
    I think you only need to give permission "Read" to the user/group.
    Let me know if this helps.

Maybe you are looking for