Scheduling SSIS package fails
Hi,
I've successfully created a SSIS package and I can execute it manually. Now I am trying to schedule it as a job to run daily at certain time. For this, I tried to create a job through 'SQL Server Agent' in Sql Server Management Studio. But when I configured
the Step properties and clicked 'Ok' it is throwing this error.
TITLE: SSIS Execution Properties
The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.".
This occurs when CPackage::LoadFromXML fails.
ADDITIONAL INFORMATION:
The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.".
This occurs when CPackage::LoadFromXML fails.
I am using Visual Studio 2010 for creating package and SQL Server 2008 R2. Also, I gave my credentials in the package's connection string. And I am trying to schedule the job with the same package credentials as the job owner.
The Protection Level in Visual Studio was set to 'EncryptSensitiveWithUserKey'.
What am I doing wrong to create a job step?
Thanks for any help!
Hi CRMProgrammer,
Based on my research, the error “The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value
from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.” always occurs when you open or deploy a higher version SSIS in a lower version SQL Server.
Based on your description, it seems that the package is created in SSIS 2012, while you trying to schedule it in SQL Server 2008 R2. SSIS versions are not backwards compatible. Please notice that once a package is upgraded from SSIS 2008 R2 package schema
to SSIS 2012 package schema, the package cannot be downgraded. So we cannot schedule the SSIS 2012 packages in SQL Server 2008 R2 anymore.
To work around this, we should recreate the package in SSIS 2008R2 or schedule the package in SQL Server 2012.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support
Similar Messages
-
SSIS 2012 Scheduled SSIS package fail to start – Execution timed out
Hi
I am currently running into an issue that seem to have a live Connect issue raised for it. The following is the link to the connect issue https://connect.microsoft.com/SQLServer/feedback/details/783291/ssis-package-fails-to-start-application-lock-timeout-in-ssisdb-catalog-create-execution
There is also a blog post that explains this issue in more detail, however the solution
it provides does not work all the time and I am very reluctant to create custom stored procedures in the SSISDB. http://speaksql.wordpress.com/2013/06/27/ssis-2012-fail-to-start-execution-timed-out/
Just to give some more background. When scheduling 10 or more, in my case I scheduled 14, SQL Server Agent Jobs all executing a package in the SSIS Catalog and all kicking off on exactly the same time about 10% to 20% of these jobs fail stating one of the
following error messages:
The operation failed because the execution timed out. Source: .Net SqlClient Data Provider Started: 12:20:01 Finished: 12:20:07 Elapsed: 5.797 seconds. The package execution failed. The step failed.
Description: Transaction (Process ID 66) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction. Source: .Net SqlClient Data Provider Started: 14:06:48 Finished: 14:06:53
Elapsed: 4.719 seconds. The package execution failed. The step failed.
This timeout takes place both when using TSQL to start the package in the Job or when the step in the Job is set to start the package as an Integration Services Package.
Steps to recreate this:
1. Create one SSIS package that simply executes for around a minute. For example you can use an Execute SQL Task and simply execute the following TSQL "WAITFOR DELAY '00:01:00'"
2. Create 14 SQL Server Agent Jobs each executing the same package and schedule all of them to run at the same time.
3. Watch the execution of the jobs take place and note the failures. (This does not always happen and you might get one run in which everything executes without a problem. The next run might have 6 or 7 of the jobs fail.)
You can also create 14 different SSIS packages, one for each job, and the result is the same.
I am running on SQL 2012 SP1 CU4. Windows Server 2012 R2 patched to the lastest patch level.
This issue does not happen when the packages are deployed to the SSIS Package Store the way that it was done in SQL2008 and before. It only occurs when the SSIS packages are deployed to the SSIS Catalog.
Any help or feedback on this would be greatly appreciated.
Kind Regards,
Christo OlivierHi Tom
Thank you for the fast response. I went and increased the value by 1024KB instead of the initial
512KB. Unfortunately this seems to only alleviate the issue but does not stop it from occurring. It
is happening much less often now but still occurring intermittently.
Regards,
Christo -
SSIS Package Fails when Scheduled as a SQL Server Agent Job
I have an SSIS package that runs without any problems when executed through BIDS.
However, when I schedule the SSIS as an Agent job, it fails completely or part way through. When it partially runs, the part that it is failing on is a Script Task that moves the source data file to an archive folder (on the same server).
I have tried using my domain account as the owner of the job, then the job fails straight off and I get an error:
Unable to determine if the owner (Domain\MyID) of job JobName has server access (reason: Could not obtain information about Windows NT group/user 'Domain\MyID'
If I change the owner to the 'sa' account , then the job partially runs, but then fails because 'sa' is a SQL account and does not have access to the filesystem.
I have managed to get it to work by using the SQL2008_Local account and granting modify permissions to the affected folders.
My question is - what is the advised way of doing this?
Thanks
GaryHi Garyv.King,
When you see a SSIS package fails running in a SQL Agent job, you need to first consider the following conditions:
1. The user account that is used to run the package under SQL Server Agent differs from the original package author.
2. The user account does not have the required permissions to make connections or to access resources outside the SSIS package.
For more detailed information about the issue, please following this KB article:
An SSIS package does not run when you call the SSIS package from a SQL Server Agent job step
http://support.microsoft.com/kb/918760
You can check SQL Server Agent’s activity logs, Windows Event logs and SSIS logs to get more clues. Also the tool Process Monitor is helpful to track the cause of registry or file access related issues.
The following 4 issues are common encountered in the SSIS forum.
1. The package's Protection Level is set to EncryptSensitiveWithUserKey but your SQL Server Agent service account is different from the SSIS package creator.
2. Data source connection issue.
3. File or registry access permission issue.
4. No 64-bit driver issue.
For more information about it, please see:
How do I troubleshoot SSIS packages failed execution in a SQL Agent job:
http://social.technet.microsoft.com/Forums/en-US/sqlintegrationservices/thread/e13c137c-1535-4475-8c2f-c7e6e7d125fc
Thanks,
Eileen -
DTEXEC does not fail when SSIS package fails
I need to run my SSIS 2012 packages through the catalog with DTEXEC. This works very well, except that if my SSIS package fails, DTEXEC does not fail. I need DTEXEC to fail, so my scheduler knows that there is an error.
I use the following command:
dtexec /ISServer "\SSISDB\MyFolder\MyProject\MyPackage.dtsx" /Ser MyServer /Par $Package::Partition;201412 /Env 5
When I check the status of the run in the Catalog, it is failed.
When I used SSIS 2008, I had no problem getting DTEXEC to fail when the packages failed.I've had the same problem, and come up with the following prototype for a SQL Script which I run in our JAMS Enterprise Scheduler. It uses SSISDB stored procedures to start the SSIS package and polls every 5 seconds to report any messages, and final
status code of the package. JAMS parameters are delimited by << >> symbols, and will need to be changed for your scheduler/batch process. I guess the script could be converted to a stored procedure. I'm also hoping it will work with SQL High
Availability groups to ensure the SSIS package runs on the server that's hosting the active database.
DECLARE @execution_id BIGINT
DECLARE @status INT= 1
DECLARE @Event_Message_id BIGINT= 0
DECLARE @Last_Event_Message_id BIGINT= 0
DECLARE @message_time DATETIME2(7)
DECLARE @message NVARCHAR(MAX)
--Create a SSIS execution for the required SSIS package and return the execution_id
EXEC [SSISDB].[catalog].[create_execution] @package_name = N'<<pPackageName>>.dtsx',
@execution_id = @execution_id OUTPUT, @folder_name = N'<<pSSISFolderName>>',
@project_name = N'<<pSSISProjectName>>', @use32bitruntime = <<p32Bit>>, @reference_id = NULL
RAISERROR('Starting SSIS package <<pPackageName>> with execution_id %I64d on server %s',0,0,@execution_id,@@SERVERNAME) WITH NOWAIT
--Set the logging level 0-none, 1-basic (recommended), 2-performance, 3-verbose
EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id,
@object_type = 50, @parameter_name = N'LOGGING_LEVEL',
@parameter_value = <<pLogging_Level>>
--Start the package executing
EXEC [SSISDB].[catalog].[start_execution] @execution_id
WHILE @status IN ( 1, 2, 5, 8 ) --created (1), running (2), canceled (3), failed (4), pending (5), ended unexpectedly (6), succeeded (7), stopping (8), and completed (9).
BEGIN
WAITFOR DELAY '00:00:05'
--Get the status to see later if we've finished
SELECT @status = status
FROM SSISDB.catalog.executions
WHERE execution_id = @execution_id
--Are there any event messages since we last reported any?
DECLARE curEventMessages CURSOR FAST_FORWARD
FOR
SELECT event_message_id ,
message_time ,
message
FROM SSISDB.catalog.event_messages
WHERE operation_id = @execution_id
AND event_message_id > @Last_Event_Message_id;
OPEN curEventMessages
FETCH NEXT FROM curEventMessages INTO @Event_Message_id, @message_time,
@message
WHILE @@FETCH_STATUS = 0
BEGIN
--We've found a message, so display it - watch out for % signs in the message, they'll cause an error if we don't replace them
SET @message = CONVERT(NVARCHAR(MAX), @message_time, 113)
+ ' ' + replace(@message,'%',' percent')
RAISERROR(@message,0,0) WITH NOWAIT
SET @Last_Event_Message_id = @Event_Message_id --Make a note that we've reported this message
FETCH NEXT FROM curEventMessages INTO @Event_Message_id,
@message_time, @message
END
CLOSE curEventMessages
DEALLOCATE curEventMessages
END
--@Status indicates that package execution has finished, so let's look at the outcome, and error if there's a problem
IF @status = 7
RAISERROR('Package Succeeded',0,0)
ELSE
IF @status = 9
RAISERROR('Package completed',0,0)
ELSE
IF @status = 3
RAISERROR('Package Cancelled',16,1)
ELSE
IF @status = 4
RAISERROR('Package failed (see error message above)',16,1)
ELSE
IF @status = 6
RAISERROR('Package ended unexpectedly',16,1)
ELSE
RAISERROR('Package ended with unknown status %i',16,1,@status) -
Errors in job scheduled SSIS package
A job scheduled for SSIS package failed with the below errors:
Microsoft (R) SQL Server Execute Package Utility Version 10.50.4321.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.
Started: 5:00:02 AM
Error: 2015-01-02 05:06:39.25
Code: 0xC0202009
Source: Data Flow Task OLE DB Destination [46]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80004005. An OLE DB record is available.
Source: "Microsoft SQL Server Native Client 10.0"
Hresult: 0x80004005
Description: "Could not allocate a new page for database because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary
space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.". End Error Error: 2015-01-02 05:06:39.42
Code: 0xC0209029
Source: Data Flow Task OLE DB Destination [46]
Description: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (59)"
failed because error code 0xC020907B occurred, and the error row disposition on "input "OLE DB Destination Input" (59)" specifies failure on error. An error occurred on the specified object of the specified component. There may be
error messages posted before this with more information about the failure.
End Error Error: 2015-01-02 05:06:39.44
Code: 0xC0047022
Source: Data Flow Task SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (46) failed
with error code 0xC0209029 while processing input "OLE DB Destination Input" (59). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow
task to stop running. There may be error messages posted before this with more information about the failure.
End Error Error: 2015-01-02 05:06:39.48
Code: 0xC02020C4
Source: Data Flow Task Flat File Source [1]
Description: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
End Error Error: 2015-01-02 05:06:39.50
Code: 0xC0047038
Source: Data Flow Task SSIS.Pipeline
Description: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned
error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error
messages posted before this with more information about the failure.
End Error Error: 2015-01-02 05:16:23.49
Code: 0x00000000
Source: Execute SQL Task 1
Description: Could not allocate space for object 'bo.TLE'.'PK_new' in database because the 'PRIMARY' filegroup is full. Create disk space
by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
End Error Error: 2015-01-02 05:16:23.70
Code: 0xC002F210
Source: Execute SQL Task 1 Execute SQL Task
Description: Executing the query "Sp_load" failed with the following error: "Warning: Null value is eliminated by an aggregate
or other SET operation.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
End Error DTExec: The package execution returned DTSER_FAILURE (1).
Started: 5:00:02 AM
Finished: 5:16:27 AM
Elapsed: 984.928 seconds. The package execution failed. The step failed.
Please help!!!!Hi,
Based on the error message” Could not allocate a new page for database because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth
on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
As to the issue that the job executed successfully for the next run when executed, I think it can be caused by someone or something had made something to increase the space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Scheduling SSIS packages through SQL Server Agent
Hello All! I have an SSIS question for BPC 7.5 installations across multiple servers. I have been rebuilding all my DTS packages over to SSIS and trying to learn this more dynamic environment. Currently I have saved a copy of all my rebuilt packages from BIDS (on web server) to the MSDB located on the SQL server. I can manually run packages from Integration Services and load data successfully. When I try to schedule packages based on the packages stored in MSDB, I get failures. The errors initially suggested I was passing over a NULL password, so I adjusted the protection level of the package to ServerStorage, as opposed to the default setting.
Now I have the following error when I schedule and run it:
Message
Executed as user: AMERICREDIT\svcbpc_ssis_dev. Microsoft (R) SQL Server Execute Package Utility Version 10.0.2531.0 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:48:00 AM Error: 2011-02-28 11:48:02.05 Code: 0xC0010018 Source: Convert Task 2008 Description: Failed to load task "Convert Task 2008", type "OSoft.Services.Application.DataMgr.Task.SSISConvert, OSoftTaskConvert2008, Version=7.0.112.0, Culture=neutral, PublicKeyToken=bf6c37fa78f5a648". The contact information for this task is "". End Error Error: 2011-02-28 11:48:02.06 Code: 0xC0010018 Source: DumpLoad Task 2008 Description: Failed to load task "DumpLoad Task 2008", type "OSoft.Services.Application.DataMgr.Task.SSISTaskDumpLoad, OSoftTaskDumpLoad2008, Version=7.0.112.0, Culture=neutral, PublicKeyToken=bf6c37fa78f5a648". The contact information for this task is "". End Error Error: 2011-02-28 11:48:02.13 Code: 0xC0010026 Source: Convert Task 2008 Description: The task has failed to load. The contact information for this task is "". End Error Error: 2011-02-28 11:48:02.13 Code: 0xC0024107 Source: Convert Task 2008 Description: There were errors during task validation. End Error Error: 2011-02-28 11:48:02.13 Code: 0xC0010025 Source: Z6_VW_STAT_APLN_CURR Description: The package cannot execute because it contains tasks that failed to load. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:48:00 AM Finished: 11:48:02 AM Elapsed: 1.406 seconds. The package execution failed. The step failed.
It appears I cannot execute any of the BPC custom tasks in the SSIS packages. Any recommendations?Thanks, James, your point is well taken. Originally we were importing packages into the file system, but had the same results when scheduling.
Below is the message received when I schedule a package located in the stored package file system from my web server:
Executed as user: AMERICREDIT\svcbpc_ssis_dev. Microsoft (R) SQL Server Execute Package Utility Version 10.0.2531.0 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:36:00 AM Error: 2011-03-01 10:36:02.56 Code: 0xC0010018 Source: Convert Task 2008 Description: Failed to load task "Convert Task 2008", type "OSoft.Services.Application.DataMgr.Task.SSISConvert, OSoftTaskConvert2008, Version=7.0.112.0, Culture=neutral, PublicKeyToken=bf6c37fa78f5a648". The contact information for this task is "". End Error Error: 2011-03-01 10:36:02.58 Code: 0xC0010018 Source: DumpLoad Task 2008 Description: Failed to load task "DumpLoad Task 2008", type "OSoft.Services.Application.DataMgr.Task.SSISTaskDumpLoad, OSoftTaskDumpLoad2008, Version=7.0.112.0, Culture=neutral, PublicKeyToken=bf6c37fa78f5a648". The contact information for this task is "". End Error Error: 2011-03-01 10:36:02.62 Code: 0xC0010026 Source: Convert Task 2008 Description: The task has failed to load. The contact information for this task is "". End Error Error: 2011-03-01 10:36:02.62 Code: 0xC0024107 Source: Convert Task 2008 Description: There were errors during task validation. End Error Error: 2011-03-01 10:36:02.62 Code: 0xC0010025 Source: Z6_VW_STAT_APLN_CURR Description: The package cannot execute because it contains tasks that failed to load. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:36:00 AM Finished: 10:36:02 AM Elapsed: 1.954 seconds. The package execution failed. The step failed.
Could this be a security thing? If so, what would my security need to be set up from the package level? -
Schedule SSIS packages as job in SQL Server Agent errors
Hi, I am using SQL Server 2008 R2 and created few SSIS packages and schedule them using SQL Server Agent and every time I try to schedule packages via SQL Server Agent my jobs keep failing. I am using domain/ione as the owner and when I invoke the job on
ServerA let's say and the job gets executed by domain/ServerA$ and fails as it does not have enough privileges. How do I fix this issue firstly without the proxy and why is the job being executed by domain/ServerA$ when the owner & user who invokes
it is domain/ione?
Thanks in advance............
IoneHi Ione,
The owner of any SQL jobs should be SA or any other non-expiring account
If you do not want the proxy used, then add the needed priveleges.
The owner of the job is one, the SSIS step gets executed by the account the Agent is running under.
Arthur
MyBlog
Twitter -
My SSIS package loads data from access database to SQL Server database.
It's a straight copy. It fails with the below warnings and error message as shown below:
Error messages:
[OLE DB Source [113]] Error: There was an error with OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID] on OLE DB Source.Outputs[OLE DB Source Output]. The column status returned was: "Text was truncated or one or more characters had no
match in the target code page.".
[OLE DB Source [113]] Error: The "OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID]" failed because truncation occurred, and the truncation row disposition on "OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID]"
specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure
code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
There are 3 warning messages even before I run the package. Warnings are all about the mismatch between the source and destination column sizes.
I cross checked the source and destination column sizes. The destination column sizes are fairly high than the source column sizes.
It worked well all the while and when we are going to pre-prod it is throwing errors. Any help is highly appreciated.
Thank you.It worked well all the while and when we are going to pre-prod it is throwing errors. Any help is highly appreciated.
Please check if the dev destination table has same column data types and size as compared with pre prod table
Thanks, hsbal -
I have a SSIS package that fails when running via sql server agent. I can successfully run it from BIDS. I have created a proxy account that is in the local server administrators group and is sysadmin. SQL Server Agent and SQL
Server Integration Services are running under the same account,
following the the error message:
Error: 2014-02-07 10:29:12.59
Code: 0xC0029151
Source: Execute De-linking Execute Process Task
Description: In Executing "d:\cie\files\working\9426\PowerpointConsole.exe" " 60.ppt" at "d:\cie\files\working\9426", The process exit code was "-532459699" while the expected was "0".
End Error
This package ran successfully on a different server running windows 2003 and sql server 2008 r2. The new environment is windows 7 with sql server 2008 r2.Hi Gaileg,
As Abhinav said, to check whether it is a 32-bit/64-bit issue, please check whether the package runs in 32-bit runtime mode or 64-bit runtime mode in BIDS by checking the Run64bitRuntime property of the project. Then, make sure the package runs in the same
runtime mode in the SQL Server Agent job by checking or unchecking the “Use 32 bit runtime” option for the Execution options of the job step.
If it is not the issue, please create another job that uses a CmdExec type job step to call the executable “D:\cie\files\working\9426\PowerpointConsole.exe”. If this job also fails, the issue is actually occurs because of the issue between executable and
SQL Server Agent rather than the SSIS package itself.
Regards,
Mike Yin
TechNet Community Support -
I have a web application developed through VS 2012 which has a button on a form that when operated starts a SQL Server agent job on the server that runs an SSIS package. The website and the instance of SQL Server with the agent and SSIS package are
on the same windows 2008 r2 server. When the button is operated no exceptions are raised but the SSIS package did not execute.
When I look in the logfileviewer at the job history of the sql server agent job I see that the job failed with message...
The job failed. Unable to determine if the owner (DOMAINNAME\userid) of job runWebDevSmall has server access (reason: Could not obtain information about Windows NT group/user 'DOMAINNAME\userid'<c/> error code 0x6e. [SQLSTATE 42000] (Error 15404)).,00:00:00,0,0,,,,0
...even though DOMAINNAME\userid is in the logins for the sql server and has admin authorities.
Could someone show me what I need to do to get this to run? Thanks tonnes in advance for any help, RoscoeThis can happen when the network is too slow to allow a timely completion of the verification. Or the account running has no such right.
I suggest you try using the SA account for the job as it does not require to poll the AD.
Arthur My Blog -
SSIS package fails under SQL Server Agent job
Hi All
I have designed a SSIS package to encrypt a file using Cipher (EFS) it works fine from BIDS & Package Execution Utility.
But SQL Server Agent job is failing to do this. I am getting the error as
" In executing C:\Windows\System32\Cipher.exe /e /a C:\Test.txt at "",The Process Exit code was 1 while the expected was 0."
Please help me.
ThanksTwo things that usually come to mind when this happens from BIDS locally to the SQL Agent are
1. Security is not
adequate under the SQL Agent Service Account
Rule the security problem out by setting up a proxy account that you know ahs security to run the needed tasks in the package. Either that or give the service account the permissions needed.
2. 32bit BIDS development and running under a 64bit Platform in your SSIS installation
This can be fixed by selecting run in 32bit more or running the package with the 32bit installed version of DTEXEC found in the Program Files (x86) folder where you installed tools.
Next, setup logging in the package so you get a more detailed error message. Event handlers on the tasks will be much more detailed using the OnError event. you can write that to either a flat file with a data flow in the event handler or simply
insert the event into a table using the ? as the parms. If you need assistance setting that up, here are basic steps for a SQL Server table
1) Select the task and click the event handler tab in BIDS
2) Select OnError event handler in the list
3) Click the enable link and drag a Execute TSQL Task over to the window
4) Create a table in your SQL Server database (create one so you don't litter your user DBs if needed)
5) Open the task and add the connection as needed. Then add this statement
INSERT INTO dbo.TableYouCreated
(PackageName, SourceName, EventInfo)
VALUES (?,?,?)
6) Go to parameter mappings and add 4 new mappings as following
System::PackageName
Input
nvarchar
0
System::SourceName
Input
nvarchar
1
System::ErrorDescription
Input
nvarchar
2
Save and reimport the package and then the event of the errors should insert into the table in detail
Ted Krueger
Blog on lessthandot.com @onpnt on twitter -
SSIS Package fails in the middle of the execution with some error
Hi ALL,
I have an SSIS Package which basically loops across various files and various sheets and loads that data into a SQL table.Lets say i have 50 files it loads randomly somewhere around 30 and suddenly fails in the middle with the following error
[Excel Source [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.
The AcquireConnection method call to the connection manager "Excel" failed with error code 0xC0202009.
I have no idea what this mean, i googled around and saw that i need to change the debugging properties from TRUE to FALSE, i did that but no use.
Can someone please explain me what could be the reason for this one to be happening and how can i get around this one?
Thanks.Hi Patrick,
The link you gave above helped me to achieve what i exactly want. I am using multiple processes to load the files now.
It really sucks that there is no solution for this one.But glad i am able to work it in different way.
Thanks a lot for your reply.
Not sure if its related
I've had similar error recently while working with ACE provider and these steps helped me to fix it
http://visakhm.blogspot.in/2013/12/how-to-solve-microsoftaceoledb120-error.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
Hello,
When I move the package from development to production package fails due to excel connection manager.
Error message---
Message
Executed as user: Answers\Administrator. ...lt: 0x80040154 Description: "Class not registered". End Error Error: 2014-06-27 05:10:26.50 Code: 0xC0202009 Source: CPRO_Prod_to_XLS_Worksheet_Basic_EX
Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE
DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2014-06-27 05:10:26.50 Code: 0xC0202009 Source: CPRO_Prod_to_XLS_Worksheet_Basic_EX
Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE
DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2014-06-27 05:10:26.50 Code: 0xC0202009 Source... The package execution
fa... The step failed.
Any help would be appreciated.Hi Vinay,
As Visakh mentioned, the issue usually occurs because the package runs in 64-bit runtime, however, the Excel driver is 32-bit. According to your another thread, it seems that you use SSIS 2005, right? In SSIS 2005, there is no “use 32 bit runtime” option
for the package executions of a SSIS package job step. In this condition, you have two choices:
Install the 64-bit Microsoft ACE OLE DB 12.0 Provider on the production server. Here is the download link (AccessDatabaseEngine_x64.exe):
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Create a CmdExec type job step instead of SSIS Package job step, so that we can call 32-bit DTExec.exe to execute the package within command line. For more information, please see:
http://support.microsoft.com/kb/934653/en-us
Regards,
Mike Yin
TechNet Community Support -
SQL Server Job that were written in SSIS packages failed
could not load package files system because of error 0x80070002. Description: could not find file 'C:\program files\microsoft SQL Server\100\DTS\Binn\. The package could not be loaded. The step failed. I found this error on one of my job configured in
ssis packages which take a view statement from my production server, which actually is in a cluster environment. Thank you guysIt's a little difficult to infer what could be happening without having an idea about what the package does. If you can share one or two screenshots of it, it would be great. You will need Business Intelligence Development Studio (BIDS) for SQL 2008 or previous,
or SQL Data Tools if SQL 2012. Right click over the package in the file system and select "Edit".
In the meanwhile, let me give some ideas for troubleshooting:
If your servers are 64bits, be sure your SQL Agent Job step for the SSIS package is running also in 64bits.
Assuming your package basically takes data from the view and move it to other server, main of the workload should be at read time from the view. Try running the SQL statement that package is issuing and take the time. If the time is still less than
3 minutes, your package should have more logic/transformations doing other tasks that we will need to look in. If time is much more, maybe you have much more data in the view underlying tables.
If querying from the view is still so fast, we will need to understand what the package is doing after the initial read.
HTH
Please, mark this post as Answer if this helps you to solve your question/problem.
Alan Koo | "Microsoft Business Intelligence and more..."
http://www.alankoo.com -
SSIS Package Fails Immediately in Data Manager
Hey all!
I have an SSIS Package that works perfectly in my Production system. I'm currently trying to test the exact same package in my Test System. The only change I've made to the package was to change the server name to point to our Test Server.
Now, within SSIS, this Test package runs completely fine. However, when I try to run the exact same package through the Data Manager. The package Errors out immediately. Of course, BPC gives no error message at all to help troubleshoot.
Does anyone have any idea why this package would work on our Production system, but not our Test Server? Any hints on what to look for would be extremely welcome!
Thanks much!
SeanFor clarity, you have an SSIS package in production, in the DM file folders, that you are copying over to a file location in the TEST environment. Then you are adding the package via the DM interface. The saving the view. Then trying to execute the package?
-If you edit the package via the DM interface, does everything look correct, regarding settings for the package?
-Does the package have more SSIS tasks than just standard BPC tasks? Do they need to be modified for the new servers.
- WHat does the package do? Is it supposed to run logic? B/c it may need the logic statements to be validated and saved?
Please Let us know.
Maybe you are looking for
-
Any ideas as to why the applications do not open in a window?
-
UXGA via DVI on G3ti200-Pro TD?
Hi, I'm the proud owner of an MSI G3Ti200 proTD vga card, I bought it almost 1 year ago, and never a glitch, never a fault. This card works flawlessly. but I have a question to you guys (especially technically skilled onez) QUESTION 1) I'd like to bu
-
i am having a problem with a sapscript form for payment advice. its in germany but i want it in english. how do i convert it to english. the name of the form is F110_D_DTA. Its a standard form. if there is anyone who has this form in english please s
-
Missing information on Custom Services running on T61.
Just wandering why Lenovo/IBM do not provide description/documentation on the custom services they developed and configured for ThinkPads. For example "ThinkPad HDD APS Logging Service" - there is no description provided in Windows Services app. And
-
ScrollPane Problem (please help!!!!)
I've got a class PanneauImages (extends JPanel) and it contains (zone_photo) a canvas on which i draw images(several images ( a set of images) on one canvas, that's y i need a ScrollPane). In the application, we have a button to change the set of ima