Schema and Forms: Exercise 4 Part 1 - Extending a Factory Schema

Note that for this exercise you are all extending the same nms:recipient schema, so I suggest that you make up your own one or two attributes rather than all using the attributes in the recording.

Similar Messages

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement.

Change of Position in MSS with Process and Forms

Hi,
I'm trying to create authorizations for a change of position in Process and Forms, but every time that I choose a new position to the employee I get the error, No authorization, with this details:
No authorization
Message no. 5A277
Diagnosis
You are not authorized to perform this activity.
System Response
The system cancels the activity you have tried to perform.
Procedure
If necessary, you can maintain missing authorizations in Customizing. Please remember that both the standard authorizations and the structural authorizations are checked.
I have managed to change the position and create positions in SAP with t-code PPOME, but in the MSS Portal it doesn't work.
I use authorization with context ( S_ORIGINCON ) with a FM in the structural profile that returns my objects ( O, S, P ). I also have personnel planning authorization ( PLOG ) for the returned objects.
Any help to overcome this problem will be greatly appreciated.
Regards,
Diogo Silva.

Hi there,
We stop using SAP code to manipulate the infotype 0001, and started using our own code throw generic services I guess (Not my part of the project).
The problem was that in a change of position for a new created position or even for an existing position there was a need for access to the default position OBJID='99999999'. That's why when you give authorization for object OTYPE=' ' and OBJID = ' ' you will not get an error, because it gives authorization for all objects, witch defeats the purpose of security.
If you debug the functions used by the portal (MSS or ESS) you will see that in some FM on the call stack there is passed a flag that controls wether or not there is a authorization check for that default position.
Basically ww stop using the SAP code, and started calling this FM (BAPI, etc) ourselves, and them we manipulated that flag so that we could circumvent the error.
I hope it was clear, sorry if it was not, truth be told it was a long time since I finish that project.
If you need anymore help just let me know.
Regards,
Diogo Silva.

Creating a new position and updating IT 1028 using HCM processes and forms

I have to create a new position and update the related infotypes using the design time framework of HCM processes and forms. The problem I am facing is the info type 1028 is not a part of the de coupled infotype framework and does not appear in the service fields list. How can I update the infotype 1028? I was thinking of updating it using the FLUSH method of the class implementing the ADV services interface IF_HRASR00GEN_SERVICE_ADVANCED by calling the function module RH_INSERT_INFTY. But, how do I get the position ID created? Is there any other way of achieving this? Please help as soon as possible.

HI
Create one Function Module to return all the vacant positions and load that in a drop down.
For IT1028 you have to update via the RH_INSERT_INFTY.
Kind Regards,
Mukesh

Infotype 0000 Creation using HCM Processes and forms in MSS

Hi,
I need to create an Action for Transfer an employee using HCM Processes and Forms. So, my form should update infotype 0000, 0001, 0008 etc.
But when I provide create operation for infotype 0000, system is throwing short dump. When I change the operation to change nothing was creating in infotype 0000 for that respective employee. Is there any way to update infotype 0000 using HCM Processes and forms. Please help me here.
Thanks & Regards,
Nayani.

Hi Chris,
Thanks for your reply mate.
I understand that for IT0000 update we don't have to configure it explicitly.We just assign values to MASSG and MASSN and IT0000 should update. I am doing exactly that.
For the "condition" we do have multiple rules for that and I am familiar about the trickthat the rule fields must be part of the SAP_PA service which is actually making the update. That's all in place and that's working fine.
Now coming to the problem -
The "action" is "Return from Career Break" where the only PA infotype that has to be updated is IT0000. Besides that we are updating Absences,IT2001.
I have tested the process thoroughly and it seems that the system does not allow an IT0000 update without any other PA data change. To test this, I added a PA infotype update in my config and at that time IT0000 got updated beautifully. But when I am trying to update only IT0000, it fails.
To solve the issue, I had a discussion with my team and we have decided to copy IT0001 along with IT0000. So as of now, we have sorted out a workaround but the technical issue is something I would like to look into.
If you figure out anything then please let me know.
Appreciate your help.
Thanks,
Saikat

HCM Process and Forms Dynamic Actions

Hi
We are implementing HCM process and forms and presume that dynamic actions will have to be recreated as rules.
Can anyone give any guidance in this area as some of our dynamic actions are quite complex.
Many thanks
Ian

Hi,
For HR forms please follow the following link
HCM Processes and Forms (www.service.sap.com/erp: - SAP ERP Human Capital Management -> Workforce Process Management -> HCM Processes and Forms -> Media Library)
https://websmp205.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000081848&
A dynamic action has the following components.
Infotype Number (INFTY): specifies the infotype for which you want the dynamic action triggered
Subtype (SUBTY): narrows the focus to a specific subtype
Field Name (FIELDN): starts your action when a maintenance function is performed on a particular field
Function (FC): specifies the various maintenance operations to which your dynamic action would respond. They are 02 (change); 04 (create); 06 (create and change); 08 (delete); 10 (change and delete); 12 (create and delete). Dynamic actions are only applicable in maintenance operations, not in display functions.
Sequence Number (NO): refers to a sequential number.
Step (A): specifies a particular type of action. No dynamic action is executed if the function character has a value other than one of the following:
             P: Plausibility checks, which allow you to check certain conditions.
             I: Calls an infotype for processing
             W: Called after the I statement and used to assign values to screen fields while creating or copying another infotype record through the I statement
              F: Calls a FORM routine (subroutines in ABAP) during your action. The routine may reside in or out the module pool MPNNNN00.
             V: Lets you treat collectively a number of fields for which you want to define a common dynamic action
              M: Sends SAP Office mail
Variable function part: The variable function part along with the step indicator forms the core part of your action. It specifies the processing details when the dynamic action is triggered. For example:
Requirement: When the postal code or the city of an employeeu2019s permanent residence is changed in infotype 0006, an email should be sent to the administrator.
INFTY    SUBTY    FIELDN    FC          NO.    STEP       VARIABLE FUNCTION
0006           1             ORT01      06             001           V               PSTLZ
0006           1             PSTLZ      06             002           M               M0001
The V statement on line 001 is used to link the two fields to the M statement. The statements relevant to field PSTLZ are also applicable to the ORT01 field.
When a record is created or changed in infotype 0006 of permanent address, an email is sent using the feature M0001. Information such as the recipient address, subject, and content of the mail is derived from M0001.
Warm REgards,
Kapil

Please explain what are form groups and form routines

Hello ABAP Experts,
Could you please explain what are form groups and form routines? I would certainly appreciate some examples.
Thank you in advance, Aleksandra

Hi,
I've found the Form Group in transaction J7LE. It is part of Industry Specific solution for hi tech companies, so I'm not sure if you'll be able to access it. In this tcode you define master data of your partner. The first step is to choose the Form Group - they simply group Form Routines. Depending on which one I choose, different entry fields get activated. However there are routines that will enable input to the same fields, so I suppose there must be some additional functionality behind it. Could you please specify what does it mean?
>>Form ROUTINES, are subroutines for modularizing your code<<
I'm afraid I have no ABAP experience at all...
Cheers, A.

Cfoutput query and form field names

I have a form that have two field inputs. I would like to repeat the form fields as part of a cfoutput query. The first field of the form automatically populates the different person's name (via cfoutput query) and this form field is called "tenant". The next field of the form is called "sales". The sales field is left open for user imput. The entire form is in between the cfoutput query tags. When the cfoutput query is executed, Both form fields of the form is displayed with each tenant name listed in each of the first form fields of each row. The problem I'm running into is that even though the form elements appear to display correctly, I would like the name of each of my form elements in the cfoutput query, of each row to have a different form field name like, tenant2, sales2, tenant3, sales3 etc. is that possible?
Here's what my code look like.
<cfform action= "addsales.cfm" method="post">
<cfoutput query="tenantsales"><Input name="tenant" type="text" value="#office.tenant#" size="32" />
<select name="sales"><option>$5</option><option>$10</option><option>$12</option></br></cfoutput>
<input name="submit" type="submit" />
</cfform>

I cannot imagine why you would want to show a list of pre-populated input fields. What makes sense to me is a select-box. If that is indeed what you want, then you could do something like this:
<cfform action= "addsales.cfm" method="post">
<cfselect name="tenant">
<option value="">Tenant</option>
<cfoutput query="tenantsales">
<option value="#tenantsales.tenantID#">#tenantsales.tenantName#</option>
</cfoutput>
</cfselect></br>
<cfselect name="sales">
<option value="">Sales</option>
<option value="5">$5</option>
<option value="10">$10</option>
<option value="12">$12</option>
</cfselect></br>
<cfinput name="submit" type="submit" value="Submit" />
</cfform>
Like Dan, I have assumed your database table has a column for tenant ID.

Forms services and form builder

Hi,
We are installing Oracle Forms 10g Application Server 10.1.2.0.2. What is difference between
Form Services and Form Builder. Which one developer should be used for migration,qa purpose?
Thanks
sandy

Sandy,
Oracle Forms Services is a part of the Oracle Application Server and is used by the apps server to display a Form built with Oracle Forms. Forms run inside a Java container in a Web Browser (Internet Explorer, etc.).
Oracle Forms Builder is a Rapid Application Development (RAD) tool used for creating user interface applications. Your developer will use the Forms Builder to create new or modify existing Forms applications.
I'm not sure what you mean by Migration and QA. Are you migrating from an older version of the Forms Builder? As to QA, who ever is performing the QA would need the Forms Builder only if they need to look at the PL/SQL code in a Form for standards compliance, proper logic, etc.
Hope this helps.
Craig...

Canvas and form (&elements)

Hi, i wanna use input box with canvas. As i googled it is not possible. It says i have to write my own inputbox.
First question: is there another way use inputbox with canvas?
Second: Can i use canvas and form together. Can i draw something with canvas on half of screen, can i put a form on another part?

aDiGe wrote:
Lets make clear my problem.
I have letters in square and i am changing square's background in my code. It is easy to make with canvas. But i need an InputBox under the letters, it is a bit hard for me to draw it with canvas.You mean you have problems making it editable, right? Because I can't imagine having problems with drawing some background under the letters. Or perhaps you should define what exactly do you mean by "InputBox".
I thought to use form. When i use StringItem for letters i can not change their backgrounds (i dont know if it is possible)
İ tried to use ImageItem for letters. I made each of letters image. When i ll change their background i am putting another letter image on the other letter image which has different background. But i am not sure if it ll be problem about performance.
Any idea??Do I understand it correctly that you tried to simulate a TextField (which is an already available Item) using ImageItems only to have some background color under the text?
I don't know what application are you writing, but what's wrong with a simple TextField? If you're using Canvas for the rest of your application and sometimes you need some text input, just switch to a Form, let the user enter the data and switch back.
If you don't like the look of the high level GUI, implement your own TextField usable with Canvas. But trying to bend a Form like you described is just... odd.

System error in program SAPLRSDM_F4 and form RSD_CHA_GET_VALUES-02-

BW3.5
I have got several queries that have been running happily for a long time, which have suddenly developed a fault. I run the queries in Bex Analyser as part of a workbook, and these queries are disconnecting from the BW server. If I run the same queries from Query Designer I see the Stop message "System error in program SAPLRSDM_F4 and form RSD_CHA_GET_VALUES-02-".
This is a query on a Multiprovider looking at 2 Infocubes.
Does anyone know what has happened?

Thanks Gaurav,
This gave the clue that my query was too complex. Rather than follow the instructions in the note, I changed the query restrictions to make them simpler and all is well.

Confused between form 9i and form 6i

When I try to download oracle form 9i from oracle web site, the list is only the oracle form 6i R2( latest version? i guest).
Is it form 9i and form 6i R2 is the same?

Forms9iAS will be released soon, according to the project manager Ronald Grand ([email protected]). See his message:
"Jan, Oracle9i Forms is still awaiting release. We have actully completed the development work on Forms but as you may know, this is delivered as part of the iAS/iDS suite and so we are awaiting final integration.
With respect to migration to the web. If let me know your specific questions and I will address them. The good thing about going to the the web is that so many customers have migrated it means that alot of the issues you may hit are already well known with readily available solutions.
If you have specific questions, it may even be worth posting on the OTN forum - that way you can get the real world experiences of developers. I always monitor this anyway so I can answer as well."

Modification request - Search and Form History

Hi,
Firefox options are currently set to include a checkbox for "Remember search and form history." I'd like to request that this be modified to two separate checkboxes: "Remember Search History" and "Remember Form History."
Why? Because some people want one but not both. I want to be able to fill in forms quickly at sites that I frequent. But I don't want the search bar regurgitating search phrases that I'm no longer looking for. Searches and forms are different situations and should be treated as such.
Thank you.

Hello,
The people who answer questions here, for the most part, are other Firefox users volunteering their time (like me), not Mozilla employees or Firefox developers.
If you want to leave feedback for Firefox developers, you can go:
* Help (or Menu [[Image: New Fx Menu]] > [[Image: Help-29]]) > "Submit Feedback..."
Or use [https://input.mozilla.org/feedback this link]. Your feedback gets collected at http://input.mozilla.org/, where a team of people read it and gather data about the most common issues.

Did you know that Verizonwireless is saving your checking account information when you pay your bill by check and then making it part of your "MyVerizon"? This means of course if they get hacked that information could be compromised. What do you think of

Did you know that Verizonwireless is saving your checking account information when you pay your bill by check and then making it part of your "MyVerizon" without you adding it? This means of course if they get hacked that information could be compromised. What do you think of this?

Credit card and debit card and checking and savings information is encrypted so it is possible to be hacked, but the odds are greater to get hit by the Love Boat then to have a wide scale hack.
Oh yes they do happen, Bank of America, Chase, Citibank, Target and quite a few others. But in all the years I have paid my invoice with saved card information I never been hacked.
You use good passwords and the risk is minimal.
Good Luck

MS Access And Forms

I m working on a project where i was first having oracle as database but due to customer requirement he want ACCESS
But i dont know how to connect to access and forms
PLS HELp
Its Urgent

Sumit,
Forms 9i and above no longer support ODBC conenctions to Access.
Frank

Schema and Forms: Exercise 4 Part 1 - Extending a Factory Schema

Similar Messages

Maybe you are looking for