Scheme for Displaying Graphs in Host.VI using SIT?

I am wondering how others tackle the problem of displaying graphs and other indicators mapped from the the .dll running in RT to indicators on the Host.VI when you cannot edit anything in the "green" area on the host that is autogenerated with SIT Connection Manager.
My problem is that if I have 15 graphs and 50 indicators (just a guess right now, but I would think this wouldn't be uncommon for other users) I cannot display them all on the Host.VI at once besides filling a gigantic area that I have to scroll through. A better approach would be to use queus or variables to pass between other .VIs to categorize different pages of graphs that the Host.VI can call, but I cannot edit anything in this mysterious green area so I cannot save the data to any kind of structure.
Ideas? I am still new to LabVIEW so there may be an SIT trick that is obvious that I don't know about.
Thanks!

Hi gdubb85,
As far as the "green" uneditable area is concerned, there is actually nothing that restricts you from editing or modifying the code in those areas. The reason they are different from the rest of the code is that that area will be rescripted (i.e. overwritten) if you change anything in the SIT Connection Manager. So, you can edit those areas if you wish, but just be aware that if you use the SIT Connection Manager again after editing those areas, it will be overwritten.
As far as displaying your 15 graphs and 50 indicators in an organized fashion, you can accomplish this by using a Tab Control. For more information on this, please check out this link.
I hope this is helpful.
Thank you for choosing National Instruments.
Aaron Pena
National Instruments
Applications Engineer
http://www.ni.com/support

Similar Messages

How do I print the displayed graph? I am using Measurement Studio for Visual Basic.

a

It is true that calling the PrintForm method is the easiest way to print your graph. However, if you wish to print only the graph, and not the rest of your form, there is a way to do this also.
The CWGraph control, and some other CW controls, supports the ControlImage method which returns a Windows metafile containing an image of the graph. You can then send this image to your printer using environment-specific printer commands.
In Visual Basic, use the Printer.PaintPicture command to send the metafile, and top and left coordinates to the printer. Then call Printer.EndDoc to flush the job to the printer:
Printer.PaintPicture CWGraph1.ControlImage, 0, 0
Printer.EndDoc
In the above code, the second and third parameters specify the position of the image o
n the page; you can also enlarge or shrink the image by specifying width and height. You may want to take a look at the Visual Basic PaintPicture function help for more details on this function.
J.R. Allen

Authorization scheme for display/read only conditions on item level

Hi All,
I have question. I want to use an authorization scheme to manage if users with a certain role have the permission to either update an item or have the persmission to only see the item or that they don't have permission to see it at all.
So, the input for the scheme would be: 1. user role 2. the current page 3. the current item.
The output would be: 0 (update) 1 (read only) 2 (not displayed).
I think I can manage that.
And I can attach this schema to the items.
So far so good.
But how can I make it so that the 0,1 and the 2 will actually do what they need to do?
I have been thinking about making a function like GET_AUTHORISATON(ROLE,PAGE,ITEM) output: 0,1,2 but I still can't figure out how to connect this with the functionality I want to achieve.
Can somebody give me a hint?
Andre

Thanks Hari,
Thanks, it works, almost, but what if items are mandatory on a page, but not always mandatory?
If a user has a certain role, some fields are manadatory, otherwise not.
Again, a function would do the trick as far as the input and output information
something like IS_MANDATORY(USER_ROLE, CURRENT_PAGE, CURRENT_ITEM) but how can I make it work?
I guess a PL/SQL validation like:
IF IS_MANDATORY(USER_ROLE, CURRENT_PAGE, CURRENT_ITEM) THEN ITEM IS NOT NULL
END IF;
Andre
PS: personally I think item level security is not something you wish to implement in your system. I prefer different screens for different roles.
Far more straightforeward. Easy for maintenance. When something disfunctions, it's far more easy to pinpoint the location of the cause.

Schema for File with Multiple Fixed Records using Native Schema builder

Hi All:
The below is the sample file format which i need to read through file adapter
HeaderReacord
FailureOrderRecord
ChildFailureRecord
ChildFailureRecord
SuccessOrderRecord
SuccessOrderRecord
HeaderReacord
FailureOrderRecord
ChildFailureRecord
In the above file, totally three records are repeatedly present with fixed length eg. HeaderReacord length is 50, SuccessOrderRecord and FailureOrderRecord length is 100, ChildFailureRecord length is 25. The file may have more than one header group i.e. A single header group contain one HeaderReacord, more than one SuccessOrderRecord, more than one FailureOrderRecord and more than one ChildFailureRecord after each FailureOrderRecord.
I have created the below xsd for this scenario and get the below output. Kindly tell how to do this in Native builder using fixed length type for different fixed records options
<xsd:element name="BatchOrder">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="OrderGroupCollection" type="OrderGroup" minOccurs="1" maxOccurs="unbounded"
nillable="false"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:complexType name="OrderGroup">
<xsd:sequence>
<xsd:element name="HeaderRecord" type="xsd:string" minOccurs="1" maxOccurs="1"
nillable="false"/>
<xsd:element name="RecordList" type="RecordList" minOccurs="1" maxOccurs="unbounded"
nillable="false"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="RecordList">
<xsd:sequence>
<xsd:element name="OrderRecord" type="xsd:string" minOccurs="1" maxOccurs="1"
nillable="false"/>
<xsd:element name="ChildErrorRecord" type="xsd:string" minOccurs="0"
maxOccurs="unbounded" nillable="true"/>
</xsd:sequence>
</xsd:complexType>
Output:
=======
<BatchOrder>
<OrderGroupCollection>
<OrderGroup>
<HeaderRecord>HeaderReacord</HeaderRecord>
<RecordList>
<OrderRecord>FailureOrderRecord</OrderRecord>
<ChildErrorRecord>ChildFailureRecord</ChildErrorRecord>
<ChildErrorRecord>ChildFailureRecord</ChildErrorRecord>
<ChildErrorRecord>SuccessOrderRecord</ChildErrorRecord>
<ChildErrorRecord>SuccessOrderRecord</ChildErrorRecord>
<ChildErrorRecord></ChildErrorRecord>
<ChildErrorRecord>HeaderReacord</ChildErrorRecord>
<ChildErrorRecord>FailureOrderRecord</ChildErrorRecord>
<ChildErrorRecord>ChildFailureRecord</ChildErrorRecord>
</RecordList>
</OrderGroup>
</OrderGroupCollection>
</BatchOrder>

you cant acheive this heirarchy using the file adapters cont. conv, cos it supports only to a single level.
Maybe you can have a module or use the conversion agent !!
Some good reads on the Conv. agent!!!
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/18/conversion-agent-a-free-lunch
/people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield

Best Preset for display on HD 1080p Tv using mix of pictures and video from Sony Camera

I have photos and movies I took on a Sony Camera. I want to use them to create a slide show. The photos are shot in 16:9 aspect. The movies are in mp4 with a 640 by 480 resolution (VGA). What is the best preset to use in Premiere 10? Hopefully I did not screw up by not using the AVCHD setting in my camera for the movies.

>screw up by not using the AVCHD setting in my camera for the movies
Yes, you did... if you want HD output from an SD video
Even Premiere Pro does not do a good job of "up-rezzing" SD footage to HD output
If you do not want a final video that is so blurry that you can't see any details, you need to reduce the size of your pictures and go for SD output
Importing Video http://forums.adobe.com/thread/1065281
Saving & Sharing http://forums.adobe.com/thread/1051093
Sharing for Computer http://forums.adobe.com/thread/1058237
Steve's Basic Training Tutorials... steps are the same for several versions http://forums.adobe.com/thread/537685
-v10 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-Version/dp/1466286377/
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
User Guide PDF http://help.adobe.com/en_US/premiereelements/using/index.html
Right click PDF link in the upper right corner and select to save to your hard drive

What partition scheme for a single partition ext. hdd use for mac(hfs+j)?

Hey Forum,
I am using a wd 500gb ext hdd and now i am about to reformat my hdd to one partition hfs+j and now i need to know, reformat it to apple partition map, master boot record, or guid partition?
Pls reply thanks!:D
Ala.

Hi Ala,
GPT (GUID Partition Table) and MacOS Extended (Journaled) are the standard (normal) settings to be used for external harddisks in conjunction with Intel-based Macs like your MacBook.
Regards
Stefan

Displaying of a text file using JAVA in a browser.

Please can you give me the code for displaying of a text file using a bean and java coding. Please include all files needed. Thanks

please could you give us 200 Uss each for the work done for you plz include all needed recipes plz? thx

I have iMac G5. Need VGA adaptor for display port.

I have an old iMac Power Mac G5 8.2. I need a VGA adapter for display port so we can use it in our TV studio in my elementary school. What kind do I need to get?
Mini-DVI and mini-display don't fit.

2nd Display Support:
Mirroring Only*
2nd Max. Resolution:
1024x768*
Details:
Apple reports that this system has a "VGA output port for video mirroring on an external display or projector", and supports output resolutions of "640 x 480 pixels at 60Hz, 800 x 600 pixels at 75Hz and 1024 x 768 pixels at 75Hz". However, the hardware is capable of using an external display in dual or "extended desktop mode", Apple just blocked the capability in firmware to protect sales of more expensive Macs. Unsupported third-party hacks are available.
http://www.everymac.com/systems/apple/imac/specs/imac_g5_2.0_20.html
The port is actually Mini-VGA...
http://www.amazon.com/s/?ie=UTF8&keywords=apple+mini+vga+to+vga&tag=googhydr-20& index=aps&hvadid=7263599887&hvpos=1t1&hvexid=&hvnetw=g&hvrand=157245001668280529 38&hvpone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_3j1o7iu5si_b

Location of DTD or Schema for XSQL Statements

Hi,
where can I find a DTD or a XML schema for XSQL statements?
I am using XML Spy as XML editor. With a XSQL DTD it would be more comfortable to create xsql files.
Kind regards, Achim

Thanks for your answer.
Your proposed way creates the XML schema for the resulting XML of the query. I was asking for the XML schema or DTD of the allowed XSQL statements and attributes in the query XML file (the XSQL file).
If you are doing a xsql:query, you can add a parameter
include-schema="yes" to the <xsql:query> tag and it will
return the XML Schema for your query.
This works on the latest xdk

"Drilldown characteristic" not permitted for display hierarchy

Hi Experts,
I want to display the hierarchy in my BEx Analyzer for which i tried to activate the hierarchy for the same and got the below error.
"Default values "Drilldown characteristic" not permitted for display hierarchy"
Also I have used a standard variable for this infoobject and it is used for user input in the selection screen of the report.
Eventhough we proceed further with this message, in the Report display, it is not showing the hierarchy in the display.
Please respond ASAP.
Rgds
Kumar

Hi,
I don't know why you are getting this error. But we can create hierarchy either by using herarchy name or else by creating hierarchy variable......In characteristics for which you are creating hierarchy, in display tab of properties give DISPLAY AS KEY, SORT CHARACTERISTICS -- AS IN THE QUERY and RESULT ROWS --- ALWAYS SUPPRESS....
In HIERARCHY TAB --- Give Hierarchy name select use hierarchy setting check boxand select always show radio buttons......
Do in this way and it may work......
Regards,
Kalyani.

Don't display graph for group

Hi,
I want display graph for data in every group. Sometimes it is working correctly, but when I delete one parameter from graph, grap is not displayed. Every values is not null. Is possible that data is not grouped by SQL but group with reporter ? How is working when exist two rows with equal x-value but different y-value ? I use DevSuite 9.0.2
Thanks
Roman

Error is in a graph wizard. Wizard generate invalid name of group for "src" value in xml "rw:graph" tag.

How do i get a colormap for intens graph using basic imaq

This is a follow up to
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000B58D0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_TIER_0=0&USEARCHCONTEXT_TIER_S=0&USEARCHCONTEXT_QUESTION_0=how+do+i+get+a+colormap+for+intens+graph+using+basic+imaq&USEARCHCONTEXT_QUESTION_S=0
where I asked for help getting a colormap for saving an image as a jpeg. Now, I have decided that I would like to use an intensity graph for my display of the RGB image that I have captured using my pci-1411 frame grabber board. How do I get the right colormap for the intensity graph display? I do not have vision and do not intend to purchase it. I am using the basic IMAQ package.
jc
Mac 10.4
LV7.1
CLD

Dear Sir, usually the intensity graph will help you with monochrome images, since they have a one color intensity. If you want more colors you will be able to get up to 256, and not true color (24 bit). You might want to use the Picture Control instead or a Child Window approach, please look in your Help menu, 'Search IMAQ Examples...' and then browse for IMAQ examples and choose the ones that are for Picture Control. For the Child Window look in our website for an example called 'IMAQ Display Without IMAQ Vision'.
Good luck!
Nestor.
Nestor
National Instruments

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY                                *
report zdelivery message-id z9bhu          .
types: begin of t_likp,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
       end of t_likp.
types: begin of t_lips,
           vbeln type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
        end of t_lips.
types: begin of t_vbpa,
           vbeln type vbpa-vbeln,      "SD DocumenT Number
           posnr type vbpa-posnr,      "Item number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_vbpa.
types: begin of t_kna1,
           kunnr type kna1-kunnr,      "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr type kna1-adrnr,      "Address
       end of t_kna1.
types: begin of t_li_vbpa,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_li_vbpa.
types: begin of t_final,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,     "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr1 type kna1-adrnr,     "Address
           name2 type kna1-name1,      "Name 1
           ort02 type kna1-ort01,      "City
           adrnr2 type kna1-adrnr,     "Address
           name3 type kna1-name1,      "Name 1
           ort03 type kna1-ort01,      "City
           adrnr3 type kna1-adrnr,     "Address
       end of t_final.
*            D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
*           S E L E C T I O N S C R E E N   D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
selection-screen end of block block2.
*            A T S E L E C T I O N - S C R E E N   E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
*            S T A R T   O F S E L E C T I O N     E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
*   APPLICATION                       = 'TX'
*   ARCHIVE_INDEX                     =
*   ARCHIVE_PARAMS                    =
    device                            = 'PRINTER'
*   DIALOG                            = 'X'
*   FORM                              = ' '
   language                          = sy-langu
*   OPTIONS                           =
*   MAIL_SENDER                       =
*   MAIL_RECIPIENT                    =
*   MAIL_APPL_OBJECT                  =
*   RAW_DATA_INTERFACE                = '*'
*   SPONUMIV                          =
* IMPORTING
*   LANGUAGE                          =
*   NEW_ARCHIVE_PARAMS                =
*   RESULT                            =
exceptions
   canceled                          = 1
   device                            = 2
   form                              = 3
   options                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   others                            = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
*   ARCHIVE_INDEX          =
   form                   = 'Z9BT_DELIVERY'
   language               = sy-langu
*   STARTPAGE              = ' '
*   PROGRAM                = ' '
*   MAIL_APPL_OBJECT       =
* IMPORTING
*   LANGUAGE               =
exceptions
   form                   = 1
   format                 = 2
   unended                = 3
   unopened               = 4
   unused                 = 5
   spool_error            = 6
   codepage               = 7
   others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
   element                        = 'ITEM_LIST'
   function                       = 'SET'
   type                           = 'BODY'
   window                         = 'MAIN'
* IMPORTING
*   PENDING_LINES                  =
* EXCEPTIONS
*   ELEMENT                        = 1
*   FUNCTION                       = 2
*   TYPE                           = 3
*   UNOPENED                       = 4
*   UNSTARTED                      = 5
*   WINDOW                         = 6
*   BAD_PAGEFORMAT_FOR_PRINT       = 7
*   SPOOL_ERROR                    = 8
*   CODEPAGE                       = 9
*   OTHERS                         = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
*   RESULT                         =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   spool_error                    = 3
   codepage                       = 4
   others                         = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
*   RESULT                         =
*   RDI_RESULT                     =
* TABLES
*   OTFDATA                        =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   send_error                     = 3
   spool_error                    = 4
   codepage                       = 5
   others                         = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form VALIDATE_DATA
*       text
* --> p1        text
* <-- p2        text
form validate_data .
select single vbeln into wa_likp-vbeln
                    from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform.                    " VALIDATE_DATA
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
form fetch_data .
select a~vbeln
       a~erdat
       a~kunnr
       a~kunag
       a~traty
       b~vbeln
       b~posnr
       b~matnr
       b~arktx
       b~lfimg
       b~netpr
       b~vgbel
       c~vbeln
       c~parvw
       c~kunnr
         into table it_li_vbpa
                from likp as a
                left outer join lips as b on a~vbeln = b~vbeln
                inner join vbpa as c on b~vgbel = c~vbeln
                where a~vbeln in s_vbeln and
                c~parvw = 'RE'.
endform.                    " FETCH_DATA
*&      Form MERGE_DATA_KNA1
*       text
* --> p1        text
* <-- p2        text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
        name1
        ort01
        adrnr into table it_kna1 from kna1
                    for all entries in it_li_vbpa_temp
                    where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

Using TV for display!

What type of cable will connect my macbbok pro to an HDMI port on my TV? Where can i get one? I would like to watch Netflix on my TV!

Model Name:
MacBook Pro
Model Identifier:
MacBookPro5,4
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.53 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
3 MB
Memory:
4 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
MBP53.00AC.B03
SMC Version (system):
1.49f2
Serial Number (system):
W80053JV7XJ
Hardware UUID:
9A00FCA9-2A6B-5AC5-8484-83CEBBEEE3F4
Sudden Motion Sensor:
State:
Enabled
not sure how to tell which video out port i have. i did purchase my MBP in 2010 though, so is there another way to carry audio? can i use 1 cable for display and another for audio?

Could not execute auto check for display colors using command /usr/

I am trying to Install Oracle 10g R2 on Solaris X86 32 bit
I am connecting to system from my windows vista laptop through putty... I get the following error...
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 1214 MB Passed
Checking swap space: must be greater than 500 MB. Actual 1799 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/openw
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n] n
User Selected: No
Exiting Oracle Universal Installer, log for this session can be found at /tmp/Or
I have done the following:-
# DISPLAY=192.168.1.133:0.0; export DISPLAY
# echo $DISPLAY
192.168.1.133:0.0
# xhost+
xhost+: not found
# xclock
xclock: not found
I know that I have to do the following:-
1. Install SUNWxwplt package ========> Is already Installed
2. Set DISPLAY variable
3. Execute xhost + on target (set in DISPLAY) computer
# pkginfo -i SUNWxwplt
system SUNWxwplt X Window System platform software
Some sites claim xming and some xwindows etc.... Plz give me a step by step instruction as how to overcome this..
bash-3.00# /usr/openwin/bin/xclock
Error: Can't open display:
bash-3.00# DISPLAY=192.168.1.133:0.0; export DISPLAY; echo DISPLAY
DISPLAY
bash-3.00# echo $DISPLAY
192.168.1.133:0.0
bash-3.00# /usr/openwin/bin/xclock
Error: Can't open display: 192.168.1.133:0.0
bash-3.00# pwd
bash-3.00# find . -name xhost
./usr/openwin/bin/xhost
^C
bash-3.00# /usr/openwin/bin/xhost +
/usr/openwin/bin/xhost: unable to open display "192.168.1.133:0.0"
bash-3.00#
# echo $PATH
/usr/sbin:/usr/bin
I have also gone through the below ... but was not of much help
Unable to execute runInstaller: Check if the DISPLAY variable is set
Plz help
Edited by: [email protected] on Feb 11, 2009 5:16 AM

bash-3.00# echo $SHELL
/sbin/sh
bash-3.00# echo $DISPLAY
bash-3.00# DISPLAY=192.168.1.133:0.0;export DISPLAY
bash-3.00# echo $DISPLAY
192.168.1.133:0.0
bash-3.00# /usr/openwin/bin/xclock
Error: Can't open display: 192.168.1.133:0.0
bash-3.00# man xclock
No manual entry for xclock.
bash-3.00# /usr/openwin/bin/xhost +
/usr/openwin/bin/xhost: unable to open display "192.168.1.133:0.0"
bash-3.00#

Scheme for Displaying Graphs in Host.VI using SIT?

Similar Messages

Maybe you are looking for