SCJP 1.5 Exam registration for sell

I want to sell my SCJP exam registration coupon. It is valid up to Feb 2008
Best offer is 5900 Indian Rupees.
I am in Mumbai. If any one interested then can call me on my cell
9860529153. or mail me [email protected]

What is the exchange rate between Indian rupees and US dollars?
I paid $150 US dollars for my SCJP 1.5 exam.
EDIT:\
Nevermind... 5,900 rupees is equivalent to about $142 US dollars.
Meh... you can do better than that.
Message was edited by:
maple_shaft

Similar Messages

  • Discount in CF 9 Exam registration for developers certified in CF 8

    Now that CF 10 is out, I wish to go for the CF 9 exam. Do you get a discount-voucher if you are already certified in CF 8? If so, please kindly point me to the relevant information. I wrote to Adobe and Pearson VUE. Months have passed: no response.

    My mistake on not providing an example of what I meant by the phrase "scope refers to a scalar variable".
    Consider the following code snippet:
         <cfset x = StructNew()>
         <cfset x["age"] = 35>
         <cfset x["firstname"] = "Maxwell">
         <cfset x["lastname"] = "Smart">
         <cfset x["address"] = StructNew()>
         <cfset x["address"]["street"] = "123 Main Street">
         <cfset x["address"]["city"] = "Washington">
         <cfset x["address"]["state"] = "DC">
         <cfset x["address"]["zipcode"] = "20000">
         <cfset scope = "age">
         <cfset myage = StructGet("x.#scope#")>
         <cfoutput>isStruct(myage) = #isStruct(myage)#<br></cfoutput>
         <cfoutput>myage = <br></cfoutput><cfdump var = "#myage#"><cfoutput><br></cfoutput>
    returns
         isStruct(myage) = NO    
         myage =
         35
    in ColdFusion 9, but it returns
         isStruct(myage) = YES   
         myage =
         struct[empty]
    in ColdFusion 8.
    The documentation on structGet does not mention anything about this change in behavior from ColdFusion 8 to ColdFusion 9, thus leading me to believe that either:
    1.     structGet in ColdFusion 9 is not working correctly (and thus the reason for my original posting in this forum)
                             - or -
    2.     The documentation for structGet in ColdFusion 9 should be updated to note this change in behavior from previous versions (at least all the way back to version 4.x) of ColdFusion.

  • SCJP 5.0 exam

    Hi,
    I have some experience with java and am planning of taking the SCJP 5.0 exam. From experience what would be a reasonable preparation time frame for such an exam?
    thanks

    Well, you could read this book:
    SCJP Sun Certified Programmer for Java 5 Study Guide (Exam 310-055) by Katherine Sierra and Bert Bates
    Some of the toughest topics in the real exam are generics and concurrency , pay close attention to the new features introduced in Java 5

  • SCJP 1.4 EXAM

    In the course given for SCJP 1.4 exam, There is a point that I dont understand. It says
    Write code that explicitly makes objects eligible for garbage collection.
    Now what is this , can someone please give me a detailed description of this or tell a site where this code could be found, I have not been able to solve this topic.
    Plz Help asap.

    I'm assuming they mean that when you're killing an object that it sets all of its own objects to null as well. This seems kinda silly and overkillish to be, but....

  • Scjp 1.5 exam details

    I am planing to take scjp 1.5 exam. Can someone tell me the details about the exam. How many questions will be there , what is the time allowed & what is the pass mark of the exam.
    Please let me know from where I can get any further details, example questions.
    Thank you...

    Interested in taking the Cisco [642-901 exam |http://www.pass-guaranteed.com/642-901.htm] our [642-901 practice exams |http://www.pass-guaranteed.com/642-901.htm] and study questions are composed by experts, who use their experience in preparing you for your future in Cisco.
    Pass-Guaranteed is the one of the best site for passing the Cisco exam.
    Pass-Guaranteed also offers you [642-642 test exam|http://www.pass-guaranteed.com/642-642.htm], [640-802 exam question|http://www.pass-guaranteed.com/640-802.htm], [640-816 practice exam|http://www.pass-guaranteed.com/640-816.htm], [642-812 dumps |http://www.pass-guaranteed.com/642-812.htm]

  • Needed Latest  SCJP 1.4 exam pattern +question papers

    Hi,
    I'm taking up SCJP 1.4 exam on 13th Oct.
    Could you please suggest websites for/ send the Latest SCJP 1.4 exam pattern and question papers for me ?
    Thanks and Regards,
    Sanjeev Kulkarni

    Darryl.Burke wrote:
    From the UK:
    Durham University's page on SLAC-HEPNAMES database of EMAIL-IDs in HEPDATA
    {color:#0000ff}http://durpdg.dur.ac.uk/HEPDATA/ID{color}That line is only in the title. The text says
    worldwide directory of email addresses
    >
    From the US:
    University of California's page on Mail ID Name Changes
    {color:#0000ff}http://email.ucdavis.edu/forms/mailidnamechange.php{color}They use MailID (not email id, is an internal identifier) and the text says
    change in your email address then after your old email address expires
    >
    >
    University of North Carolina's page on UNCW E-mail ID Retrieval
    {color:#0000ff}https://appserv02.uncw.edu/dasapps/sec/getid.aspx{color}Once again, Email-ID is again an internal term refering to the use of an email address as a logon id.
    The text, once again, says
    UNCW e-mail username (your e-mail address without the @uncw.edu)
    >
    From Belgium:
    Username: (Email ID) on
    {color:#0000ff}http://customer.netline.be/{color}
    Once again, I see this more as simply an internal reference to an email used as a logon id (so a composite term).
    Madison Area Technical College's page on Student Network/Email ID Choices
    {color:#0000ff}http://matcmadison.edu/matc/studentresources/studentemail/about.shtm{color}
    From page
    {color:#0000ff}http://www.abitmore.be/ssr2001/w3warecb.htm{color}
    ... ... like: change in eMail ID, ... ...
    These site seems to be using like you feel (although the first does not contain enough context to be sure), but they, and every other site listed here, is hardly definative.
    Edit: This is not to be combative, so please don't take it that way. Just expanding on my viewpoint.
    ;-)

  • TS1538 Hi technical support Team of  Apple  I am sorry but this time  I am very disappointed with IPhone and  IOS 7.1, actually I have IPhone 5,5S both and I was trying to Restore  my Phone for sell Because I want to by IPhone 64 Gold but unfortunately   

    Hi technical support Team of Apple  I am sorry but this time  I am very disappointed with IPhone and  IOS 7.1, actually I have IPhone 5,5S both and I was trying to Restore  my Phone for sell Because I want to by IPhone 64 Gold but unfortunately    both phone stuck on recovery mode with error 1, and 3
    I got Error 3 on IPhone 5 and error 1 In IPhone 5s , I did lot of try as I can my level best , like Update iTunes, stop all security, change cable even change computer format my laptop and install everything fresh in window   I did try to with Mac of my friend,
    Change Internet connections try with DFU mode, Make DFU file Also with redsnow   everything I did
    Whatever on internet information like go to  cmd and run as administrator  to make change hosts file
    Like ipconfig/flushdns everything  everything  what I can….  but I dint get good results and  good information about this error
    Somebody told me this is hardware problem, I make change my battery and charging connector too.
    I don’t know what to do next.. because  I don’t leave any experiment on my stuck phone..
    Note : one  is big issue that apple support team  is also and giving good answer
    I am in Saudi Arabia so I don’t  have any nearest store of Apple.. even Saudi Is Big Consumer of IPhone
    Its Really Bad its big Loss of Money I can’t afford more , Now will not Buy Any IPhone  in future if I don’t get solution..
    Thank You..

    What the **** is this taht you will not provide any service due to just a bit jailbreak..
    we are not much tecnical person.. and mostly consumer dont have good idea about Jailbreak. make your device  much better secure from hacker and jailbreak please we cant afford much money please give me any solution i ll not do jailbreak again please  

  • Ivé just recived logic and I wonder: can I use the registration for logic on all my computers or is it limited to just one?

    Ivé just recived logic and I wonder: can I use the registration for logic on all my computers or is it limited to just one?

    You can install it on 2 Apple computers

  • I have an apple id but i didn't complete the registration for itunes so i couldn't sign in to icloud...what should i do to find my lost ipad?

    I've just lost my ipad yesterday...i changed my old email with the new one but i'm not complete the registration for the itunes yet...and shortly i lost my ipad...now i'm trying to login to icloud to find my lost ipad  but this message appear "your apple id must be used to set up icloud on an iOS or OS X device before you can use icloud.com" my apple id is work but i couldn't sign in to icloud....what should i do for now?
    Is there any solution?
    Thank you.

    http://www.youtube.com/watch?v=gmOmd_WFp6o
    This was helpful for getting icloud set up from my pc...but someone said that they had it on their pc and then it disappeared. Fun! Fun! Fun!

  • How do i find the registration for quicktime pro ?

    how do i find the registration for quicktime pro ?

    It should be under the Quicktime Player 7 menu, right under 'preferences'.

  • I'd like to know a fair asking price for my macbook pro before i throw it up for sell.

    Hello everybody! if you dont mind i am asking for what you would ask for the macbook i have for sell! i opened it brand new december 23, 2012 with plans of taking an online course starting jan 7, 2013 on january 4th ,2013 i was admitted to the hospital and was there 3+months. i didnt take it back outta the box untill the begining of April once i was cleared to do ceratin activities again. it is a 15.4" macbook pro mid-2012 9,1 2.66ghz, 8gb ram, 750gb hdd, 10.8.3.mountain lion os x, if any more specs are needed for an fair estimate please let me know! i simply do not need this mamoth of a laptop so my plan is to sell it and then by a smaller mac or maybe evan an imac that will suit my needs. any advice is greatly appreciated! thank U much!    ---ryan

    I'd suggest checking eBay - search your specific model.  Then, look in the left hand column on your screen for the words "More refinements ..."  Click it.  In the window that pops open, at the bottom of the left column, click "Show only."   Then click "Completed listings" and click Go.    Now you will see what MacBook Pros like yours actually sold for on eBay.
    You can also get quotes from many of the online Mac resellers (for example, MacOfAllTrades) ... but they will only offer a price more like "wholesale" because they are in the resale business.
    Third thought, if this is truly a like new, barely used MBP, you should be able to sell it for 80% or more of what you purchased it for.  Macs hold their value pretty well, especially if they are recent models.

  • Registrations for certain software are not being recognized by my Imac.

    Registrations for software that require web based verifications are not being recognized by my iMac 27 2010 10.6.8 
    Included in the list of software that I have been using for some over a year now is FCE 4, Bias Peak, and Sibelius, and iRealb from the app store. 
    This is not a new issue although with the latest security update installed last week, the problem has been exacerbated.
    I had the problem last year but found that if I shutdown (not just restarted) and then powered up again all my registrations would be recognized. Now my workaround no longer seems to work. I actually went for about 5 months with no problems and then occasionally I would have the shutdown/power up until last week.
    I mirror the same software on my Macbook Pro 10.6.8 and have had no problems.
    Thanks for any help.
    Michael

    I can add Kindle reader to the software list now. I used it last week and this week the cloud didn't recognize my computer.
    Also on the iRealb app downloaded from the Apple app store I get a dialog that says the software was purchased on another computer (which it was, my laptop) and asks me to verify with my iTunes ID. I try to verify and it is unsuccessful, can not verify your computer.
    MT

  • Transfer of On-Line registration for Toshiba Laptop

    What is the procedure for transfer of Online Registration for Toshiba Laptop
    when I bought from a delaer who has already registered on his name.

    Hi
    I believe its not possible to do it on the website.
    I think you have to contact the Toshiba service partner in your country.
    I think you will need also a confirmation from you dealer who has registered this notebook.
    But the ASP should give you more details what is needed.
    The whole database of ASP worldwide you will find on the Toshiba European support page.

  • Security Right 'Resource' id for 'User Impersonation For Seller' right

    Hi,
    Can someone tell me whats the RESOURCE id for security right 'User Impersonation For Seller'?
    I need this to populate the workbook. None of the standard roles have this in E-Sourcing 5.1, so the standard workbook doesnt contain this right.
    Manually this right can be set in the security profile in drop down 'Users and sercurity'.
    Thanks & Regards,
    Srivatsan

    Hi
    RESOURCE ID for security right "user impersonation" is usermgmt.impersonation
    Regards
    Mudit Saini

  • For sel. field 'PERNR', no selection with SIGN = 'I'; OPTION ' ' allowed

    HI,
    I am getting this error when i m wrintg this routine.
    data: l_idx like sy-tabix.
    read table l_t_range with key
         fieldname = 'PERNR'.
              l_idx = sy-tabix.
              L_T_RANGE-IOBJNM   =      '0EMPLOYEE'.
              L_T_RANGE-FIELDNAME  =   'PERNR'.
              L_T_RANGE-SIGN      =     'I'.     
              L_T_RANGE-OPTION      =  '<>'.
              L_T_RANGE-LOW          = '1004586'.
              L_T_RANGE-HIGH        =   '1006263'.
              modify l_t_range index l_idx.
    l_idx = sy-tabix.
    For sel. field 'PERNR', no selection with SIGN = 'I'; OPTION '<>' allowed

    when you are defining low and high value, u have to use
    l_t_range-option  = 'BT'.

Maybe you are looking for