Security Right 'Resource' id for 'User Impersonation For Seller' right
Hi,
Can someone tell me whats the RESOURCE id for security right 'User Impersonation For Seller'?
I need this to populate the workbook. None of the standard roles have this in E-Sourcing 5.1, so the standard workbook doesnt contain this right.
Manually this right can be set in the security profile in drop down 'Users and sercurity'.
Thanks & Regards,
Srivatsan
Hi
RESOURCE ID for security right "user impersonation" is usermgmt.impersonation
Regards
Mudit Saini
Similar Messages
-
Invalid resource 'LDAP' for user
Hi all,
I want to integarate IDM with LDAP.Test connection is working when i intergarate with LDAP.I got the status as "succeeded" on full reconcilation and I was able to create users through IDM.I could see the users created in LDAP too...In IDM when i click assignments tab i get "Inalid resource 'LDAP' for user '12121'.Here,'12121'is my account id. I don't know wat mistake i have made.Please anyone of u help me out in this problem.hehehe... no problem.
There's a flag somewhere that gives you the option of omitting the domain. If you do, it defaults to the domain that the content server is on. I think you can get there from the "active directory" config link at the top of the "filter debug" administration page. Its kind of buried... -
Please help!!! iCloud keeps asking my password and it always comes out incorrect even though i know i input the right one. When i tried to reset the password by email (many times already), nothing was sent to me. Tried it again thru security settings, they asked for my birthdate but still, it's incorrect! anyone have the same problem?
Hi,
Thank you for visiting Apple Support Communities.
I would recommend reaching out to our Apple ID Account Security team to assist you with this issue.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H. -
What security products are suggested for scrubbing rootkits from a Mac? There are good articles on similar repairs for other makes online. I would like to investigate whether a machine can be truly scrubbed or if it's best to retire it. I haven't done anything yet as it is a candidate for more extensive forensic recovery.
Also, I am not sure if various malicious spoofing and cloaking tricks (making Wi-Fi appear off when it is on, hiding unauthorized sharing/remote access, falsifying System Preferences preference panes, etc.) are resolved by a thorough drive erase or are more similar to APTs?
Finally, is there any emerging information regarding APT hiding places other than the recovery partition? I have heard mention of the EFI, for example, but it seems unproven and unlikely. Some people have also mentioned the RAM.
This is an upsetting topic to some people, including me, so I appreciate circumspect, measured responses. Thanks! And don't try to answer all my questions if you really just want to comment or answer one. All thoughts are appreciated.Hi, Lincoln,
A straightforward question. You are correct in recognizing the difference between tentative conclusion and certainty. Here are our main reasons:
1. Incoming items noted on the console (or console sub logs) and Activity Monitor after defenses are overcome, and which are brought in by an unwelcome remote user, often have a process name and the word "kit." (Bear with me.) We soon observe the process is under attack, from terminal evidence and soon, decreased or lost functionality of the process. The terminal generally reports alteration of specific kernel behaviors. A simple example (that may or may not be accompanied by kernel changes and may simply alter permissions) is modifying Disk Utility such that key uses are unavailable. You can see how an attacker might value disabling partition views, mounting and permission repair. In retrospect, DU might not be a root alteration. I was thinking that its relation to fsck flagged it as a possible ring 0 item. I may need to know core parameters of a good example to pick strong ones.
2. Incoming folders hidden for possible later use contained bundles of similar root kits, including some not applicable to Macs. From what I have read from reasonably credible sources, root kits are sold and traded both singly and in bundles.
3. Root kits are a logical next choice for our attackers, as various prior techniques hindered us but did not paralyze us.
4. One of the most authoritative articles I found was about PCs not Macs. I noted the assertion, undocumented, that an estimated one million computers are infected by root kit manipulations, and underscored that the kits can be used by people with low computer skills.
5. MacAfee lists root kits (by description, not name) as a top pop five threat prediction in the coming year, though again, the emphasis is on PCs.
Linc, I am trying to show a spectrum of observations and info that have shaped my thinking. To retrieve better captured evidence requires significant legwork at this time, but it is something I am willing to do if you can be patient. Understand this long attack has been like a natural disaster to us.
I have not linked a few articles of interest because I forget if that's allowed. If so, I'd be glad to.
After reviewing this partial answer, you may form another hypothesis. If so, please share it. I am comfortable with my position but not clinging to it.
Thanks for your interest. Looking forward to your thoughts.
Oh, yeah: some material is out for analysis, so we should have credible opinions pretty soon. Not positive exactly when. -
Sample JAVA code using Resource Adapter for RFC Connections
Hi Java Knowledgeable Ones.
I have successfully deployed the SAP Netweaver J2ee Engine "Resource Adapter for RFC Connections to ABAP Systems" to my Web Application Server. Now I need to develop a JAVA application that would utilize this deployed resource adapter. The resource adapter specifies the SAPClient, UserName, and password. I am thinking that the JAVA code to invoke this connection would therefore not need to provide this information as it should be available in the resource adapter.
Do you have sample code that you could send to me showing how to do this?
Thanks,
KevinHi Kevin,
this is actually no good style! You should not open the connection with the adaptor knowing the password. Usually it should work via a connection that uses only basic rights and the user has already authenticated and is using his security ticket.
For security handling see:
http://help.sap.com/saphelp_nw04/helpdata/en/61/f8bc3d52f39d33e10000000a11405a/frameset.htm
Regards,
Benny -
Resource Ids for Enterprise Workbook implementation
Hi,
I have used one Enterprise Workbook for implementation of security profiles.I am able to hide majority of the option from the setup.
But am unable to hide the follwowing:-
System Setup---Highlighted Report and Query Definition List, Browse Extension Schema, Browse Full Schema
Document Setup--SRM Activity Library.
System Aminitrationunder Administrative reports-User Activity, Upgrade Reports, Security Profile Usage Summary, Global Search Administrative Reports, Conversion Reports (System), Conversion Reports (Sourcing).
I have searched for their resource ids in the enterprise workbook available with me but cannot identify the correct ones.
Can anybody please provide me the resource ids for these options or otherwise the list of resource ids where i can find resource ids for the above mentioned options.
Vaishali.Hi,
For hiding the Query Definitions, have you tried going into the Security profile of each Object and setting the vlaue as Deny?
This is possible by going into Setup --> Accounts and Security --> Security profiles. Once you select the particular Class Level profile Name, you can then navigate to the Access Rights tab and then pull up the Queries and Report dropdown. You can set the respective values as Deny for those objects that you do not want a particular group to access.
Similarly for SRM Activities, you can set the value to Deny for 'View' access type.
Important point to note is that most of these values are inherited from the Application User Class level object.
It is possible to modify the App User profile too and not make it global to all users.
Let me know if this helps.
Thanks
Vikram Shukla -
Command to set modify Advanced Security Settings (Audit Settings for folders) on windows 2008
Hello,
We have requirement to modify Advanced Security Settings (Audit Settings for folders) on windows 2008. I am looking for a command which does this job.
I know, using group policies I can do this; in fact I had done this using group policies. However, I need to do this on number of servers which are not in domain. There are around 15 folders on which I need to enable Auditing; manual editing folder advanced
permissions is a cumbersome job. Hence, I am looking for a command line options.
I need to know how command can be utilised to enable Audit option on a folder. Please share a command which can do this; once I get the command, I will create a batch file for other necessary folders. (BTW, this is not a scripting question, I just need to
know the command hence, please do not re-direct me to scripting forum)
Manually through GUI, I am setting following.. snaps are given below
Thanks !You can try using Auditpol.exe: http://technet.microsoft.com/en-us/library/cc731451%28v=ws.10%29.aspx
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer
Thanks but I guess, auditpol ca be used only to manipulate system audit policies. how do I specify a folder and user in auditpol ? I could not find or understand how folder can be included with auditpol command line options.
Thanks ! -
Does anyone know how to reset your security questions?? I loaded an itunes gift card on new ipod but when trying to make a purchase, itunes is asking us the incorrect security questions?! (for 1st time purchase) I know the questions are not what I chose because I wrote the questions & answers down when setting up the ipod. Any ideas??!!!
Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
"done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
should be asked to verify your security code for the credit /debit card and NOT the
security questions.
d. At this time you can remove the card by going back in to edit the payment info and
selecting "none" as the card type then saving the changes by selecting "done". You
should now be able to use your iTunes store credit without answering the security
questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends! -
Hello， im living at china, and im using chinese appstore to buy apps. but i forgaot my security answers to pay for smth.What i gonna to do?
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if this user tip helps : https://discussions.apple.com/docs/DOC-4551
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57 -
I have deployed a report on the server (e.g. remoteserver\reports) from my local machine. I opened the report in browser in my local machine and created a new subscription with windows file share delivery option.
But its giving an error "Failure writing file \\localserver\subscriptions\Report1.xls : An impersonation error occurred using the security context of the current user." Here "subscriptions"
is the folder which I have created in my local machine.
I followed the instructions found in the link "http://msdn.microsoft.com/en-us/library/ms157386.aspx"
Please help to solve this issue.Hi,
Thank you for your reply.
I have followed the same process. The credentials which I have given are same as my PC. But I am getting the same error. Can you please clarify the statement "Service
account that is using for file share subscription should have write access to shared folder."
given in the above link?
I am the one who created the folder and subscribing the report, so probably I have the full write permissions to the shared folder. What is the service account in this context?
I think the problem is, I am deploying the report on the server and creating the shared folder in the local machine. I tried giving shared folder permissions to the user on the server. But my local machine is in local domain and I cant access the users on
the remote server. Do I need to create a shared folder on the server? I am new to SSRS. Please help me.
PS: I have assigned with all roles viz. Browser, Content Manager, Publisher, Report Builder etc. and My Role name (WEBSERVER\User)
is different from my local user name (domain\username) in domain. -
Adding WS Security in SOAP header for calling soap services from PI
When i am calling a wss enabled webservice from soapui with the header parameters
Username , Password and Password Type - PasswordText , it is able to get results. The soapui tool automatically adds the following in the soap header -
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken wsu:Id="UsernameToken-9368150" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>xxxxx</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">xxxxx</wsse:Password>
<wsse:Nonce>aOA1P6t2hJPRyuraQ/IliQ==</wsse:Nonce>
<wsu:Created>2009-07-10T14:58:33.781Z</wsu:Created>
</wsse:UsernameToken>
</wsse:Security>
However , in PI when the following configurations are made -
Web Services Security option selected in soap receiver adapter
In Receiver Agrrement -
Security Standard - http://docs.oasis ....
Security Procedure (Request) - None
Security Procedure (response) - None
the user tokens don't seem to generated and it is giving an authentication error . Is there any process of generating this in the outgoing soap header from PI.
SOAP Axis framework is not installed at present and working on PI 7.1 SP6.
Looking forward for your repliessame issue for me too.
Try using WS adapter on receiver side .
If you are able to attach SOAP header with WSSE fields using SOAP adapter at reciever channel let me know how you did it. -
Creating Multiple Resource Objects for OOTB Connectors
All,
I am trying to create a second AD User resource object for the OOTB connector. I would like to think that the AD Connector (and all connectors, for that matter) was designed to handle the creation of multiple Resource Objects for the same Resource Types, but am I wrong? It doesn't seem like the OIM Connector can handle this easily.
Has anyone created multiple resource objects for a connector? Is this a fairly simple task, or will it require a large effort? Is it even possible? Any pointers?
Thanks!I will provide a little help with the duplication. I found the best way to do it is to import the original connector. Go through the different pieces making each one have a unique name, that is not part of any of the other piece names. You need to have unique names for the following:
1. Resource Object
2. Process Definition - Provisioning
3. IT Resource
4. Form - Process
5. Scheduled Task
After you import the connector, rename each of the following to something unique. I would also update your process form to have a default value of your IT Resource, as well as your scheduled task values to point to the new unique names. Export the 5 items, no dependecies. The adapters will all be the same. Use find and replace for the values and then import the new XML. If it works, duplicate the XML for each of the new workflows you want to create.
-Kevin -
SAP GUI 7.20 pro blem - the resource DLL for bitmaps cannot be loaded
Hello guys,
I am fighting the problem all day long.
I've installed GUI for windows 7.20 , and it cannot be lauched because of the error message :
SAP GUI 7.20 pro blem - the resource DLL for bitmaps cannot be loaded
Maybe you know what exact dll is missing or how to repair the problem manually ?
Thanks guys .
Regards,
LaimonasThanks David,
I don't see any errors in the file - these can be found by searching for '1E ' (note the space after
the E or '2E ' .
At the end of the logfile it shows:
C:\Users\XXXX\AppData\Local\Temp\Temp.Sap\SAPGUI_INST_720\Sap1F6\system\sapbtmp.dll' successfully copied to 'C:\Windows\system32\SAPbtmp.dll', so it does copy the file to the destination directory sucessfully.
I would suggest reinstalling the SAPGUI again but this time without any /package switches
In the logfile it shows:
NwSapSetupEngine.dll: 8.6.1.74
We recommend that you update your installation server with the latest sapsetup patch as per
note below:
http://service.sap.com/sap/support/notes/1587566
You will also require .NET4 runtime to use the latest installer files.
run nwsapsetup again from the server and it should install again.
Any more errors, update the nwsapsetup.log file again.
Regards,
Jude -
Inqmy resource adapter for SAP with Bea Weblogic Server
Hi everybody,
Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic server
It works well with INQMY server, but with BEA I'm getting a lot of problems creating
the connections.
Thanks in advance.
Xavi.
All,
Here are the steps we (used for internal testing) had to perform to get
IN-Q-MY adapter for SAP to work with WebLogic:
The wli.adapter.inqmy.sapr3.spi package contains extensions to the
In-Q-My J2EE Connector Architecture classes to overcome some limitations
in the base implementation classes. To get around these issues, we had
to extend their R3ManagedConnectionFactory, R3ConnectionManager, and
R3ConnectionFactory classes.
* The javax.resource.spi.ManagedConnectionFactory implementation
does not over-ride the equals and hashCode methods correctly. This
causes problems with WLS 6.1.
* There is a bug in their javax.resource.spi.ConnectionManager
implementation for non-managed uses of the adapter. Consequently, their
adapter cannot be used in a non-managed scenario.
* The javax.resource.cci.ConnectionFactory class does not support
the getConnection() method that does not take any arguments (it throws a
null pointer exception).
I am attaching the classes discussed above.
Cheers,
Chris
Torsten Friebe wrote:
> Hi,
>
> does anybody know where to get a trail version - if one exists - of IN-Q-MY
> application server or the resource adapter?
>
> Thanks, regards
> Torsten
>
> "Xavi" <[email protected]> schrieb im Newsbeitrag
> news:[email protected]...
>
>>Hi everybody,
>>
>>Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic
>>
> server
>
>>?
>>
>>It works well with INQMY server, but with BEA I'm getting a lot of
>>
> problems creating
>
>>the connections.
>>
>>Thanks in advance.
>>Xavi.
>>
>>
>
>
package wli.adapter.inqmy.sapr3.spi;
import java.io.Serializable;
import javax.resource.ResourceException;
import javax.resource.cci.Connection;
import javax.resource.cci.ConnectionSpec;
import javax.resource.spi.ConnectionManager;
import javax.resource.spi.ConnectionRequestInfo;
import javax.resource.spi.ManagedConnection;
import javax.resource.spi.ManagedConnectionFactory;
import com.inqmy.r3adapter.R3ConnectionSpec;
import com.inqmy.r3adapter.R3ManagedConnectionFactory;
* Extends the In-Q-My implementation to allow for getConnection() with no
* connection spec, i.e. use the default configured connection parameters.
public class R3ConnectionFactory
extends com.inqmy.r3adapter.R3ConnectionFactory
implements com.bea.connector.IProxyMarker {
private R3ConnectionSpec m_cspec;
public R3ConnectionFactory(ConnectionManager cm, R3ManagedConnectionFactory mcf)
throws ResourceException {
super(cm, mcf);
String strClientNumber = mcf.getClientNumber();
if (strClientNumber == null) {
throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+mcf);
String strLanguage = mcf.getLanguage();
if (strLanguage == null) {
throw new javax.resource.spi.IllegalStateException("Language not set for "+mcf);
String strUserName = mcf.getUserName();
if (strUserName == null) {
throw new javax.resource.spi.IllegalStateException("UserName not set for "+mcf);
String strPassword = mcf.getPassword();
if (strPassword == null) {
throw new javax.resource.spi.IllegalStateException("Password not set for "+mcf);
m_cspec = new R3ConnectionSpec(strClientNumber, strLanguage, strUserName, strPassword);
public Connection getConnection(ConnectionSpec connectionSpec)
throws ResourceException {
if (connectionSpec == null) connectionSpec = m_cspec;
return super.getConnection(connectionSpec);
package wli.adapter.inqmy.sapr3.spi;
import java.io.Serializable;
import javax.resource.ResourceException;
import javax.resource.spi.ConnectionManager;
import javax.resource.spi.ConnectionRequestInfo;
import javax.resource.spi.ManagedConnection;
import javax.resource.spi.ManagedConnectionFactory;
* Extends the In-Q-My implementation to over-ride the
* allocateConnection method to return a CCI connection vs. a ManagedConnection
public class R3DefaultConnectionManager
implements ConnectionManager, Serializable {
public R3DefaultConnectionManager() {}
public Object
allocateConnection(ManagedConnectionFactory mcf, ConnectionRequestInfo cri)
throws ResourceException {
ManagedConnection mc = mcf.createManagedConnection(null, cri);
return mc.getConnection(null, cri);
package wli.adapter.inqmy.sapr3.spi;
import javax.resource.spi.ConnectionManager;
import javax.resource.spi.ConnectionRequestInfo;
import javax.resource.spi.ManagedConnection;
import javax.security.auth.Subject;
* Extends the In-Q-My implementation to get around some problems encountered
* while running on WebLogic:
* <ul>
* <li>Must over-ride default implementation of equals and hashCode method</li>
* <li>Needed to provide my version of the CCI ConnectionFactory</li>
* <li>Needed to provide my version of the default ConnectionManager for the
* non-managed scenario use case</li>
* </ul>
public class R3ManagedConnectionFactory
extends com.inqmy.r3adapter.R3ManagedConnectionFactory {
private int m_iHashCode;
transient private com.inqmy.r3adapter.R3ConnectionRequestInfo t_cri = null;
public R3ManagedConnectionFactory() {
super();
java.rmi.server.UID uid = new java.rmi.server.UID();
m_iHashCode = uid.hashCode();
public Object createConnectionFactory() {
// need to install our own default connection manager because In-Q-My
// version causes a ClassCastException in CCI ConnectionFactory
// getConnection
return createConnectionFactory(new R3DefaultConnectionManager());
public ManagedConnection createManagedConnection(Subject subject, ConnectionRequestInfo cri)
throws javax.resource.ResourceException {
// need to check for null on the ConnectionRequestInfo object because the
// In-Q-My R3ManagedConnection ctor does not check for null
if (cri == null) cri = getDefaultConnectionRequestInfo();
return new com.inqmy.r3adapter.R3ManagedConnection(this, subject, cri);
public Object createConnectionFactory(ConnectionManager connectionManager) {
// need to supply a connection factory that can deal with getConnection
// that does not take a ConnectionSpec
try {
return new R3ConnectionFactory(connectionManager, this);
} catch (javax.resource.ResourceException re) {
re.printStackTrace();
throw new java.lang.IllegalStateException(re.getMessage());
com.inqmy.r3adapter.R3ConnectionRequestInfo getDefaultConnectionRequestInfo()
throws javax.resource.spi.IllegalStateException {
if (t_cri == null) {
String strClientNumber = this.getClientNumber();
if (strClientNumber == null) {
throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+this);
String strLanguage = this.getLanguage();
if (strLanguage == null) {
throw new javax.resource.spi.IllegalStateException("Language not set for "+this);
String strUserName = this.getUserName();
if (strUserName == null) {
throw new javax.resource.spi.IllegalStateException("UserName not set for "+this);
String strPassword = this.getPassword();
if (strPassword == null) {
throw new javax.resource.spi.IllegalStateException("Password not set for "+this);
t_cri = new com.inqmy.r3adapter.R3ConnectionRequestInfo(strClientNumber, strLanguage, strUserName, strPassword);
return t_cri;
public boolean equals(Object obj) {
if (obj == null) return false;
if (obj == this) return true;
if (!this.getClass().isInstance(obj)) return false;
R3ManagedConnectionFactory mcf = (R3ManagedConnectionFactory)obj;
return compare(getClientNumber(), mcf.getClientNumber()) &&
compare(getLanguage(), mcf.getLanguage()) &&
compare(getUserName(), mcf.getUserName()) &&
compare(getPassword(), mcf.getPassword()) &&
compare(getServerName(), mcf.getServerName()) &&
compare(getSystemNumber(), mcf.getSystemNumber());
protected final boolean compare(final Object obj1, final Object obj2) {
if (obj1 == obj2) return true;
if (obj1 != null) {
return obj1.equals(obj2);
} else {
if (obj2 == null) {
return true;
} else {
return false;
public int hashCode() { return m_iHashCode; }
-
Security Approach and Plan for single logon for Essbase and Reports.
Please any one can suggest me, how can I do the Security Approach and Plan for single logon for Essbase and Reports by using Maxl or Administrator.If any one have code,please forward to my email Id: [email protected]
Once you are logged in to the "Hyperion Portal" as you call it, your user credentials are automatically passed among all the components. Therefore, a lot of the logic you created to pass credentials between BQY files in a desktop environment are no longer needed.
Maybe you are looking for
-
No consigo que funcione Airplay en mi imac, no es compatible con este ordenador? es de diciembre de 2011
-
Hi, I have a sql which contains an order by clause (order by field1, field2), the query runs fine in SQL*Plus. I tried to create a Group Left report in Reports 10g. (The report contains the Group on field1.) When I run the report, it disregards the o
-
RegisterOutParam doesn't recognize types that are defined between quotes.
Suppose one defines a type as below: create or replace type "VectorOfInt" as varray(300) of number(10); in the C++ program, when using statement -> registerOutParam (...), the fourth argument is the type. If one passes ... registerOutParam(..., "MYSC
-
Hello, I need to rewrite this SQL query to give the same result, but in more resorcefull manner. Probably using aggregation, but I am not sure. Can somebody give me a head start. desc resource_bundles Name Null Type LOCALE
-
Essbase services abnoraml shutdown with Get token for user
Hi, We are facing essbase services abnormal shutdown, with a .xcp file in XCP file showing below given error, for this issue we have added __GETUSERTOKEN TRUE value in our .cfg files but it's not working. Exception Log File: /ap01/gema/hyperion/essba