SCM upgrade to 5.0 questions

Hi.
I'm planning an upgrade from SCM 4.1 to 5.0 (from Basis perspective)... my first upgrade
I'm looking around and getting documentation, but I'm still a bit lost. I've a couple of questions.. maybe some of you can help me:
- Is there a required Support Package level for the SCN 4.1 before que upgrade?
- Has SCM 5.0 compativility issues with R/3 4.7?
I'm sure I'll have lots of more questions in the future, but I try to go step by step...
Thanks in advance and regards.

Dear community!
Could you please help with your input here?
This is an older thread, but a lot of colleagues can gain benefit from this discussion!
It might be the doubt of other people!
If somebody is interested in sharing his/her opinions and experiences on this, please go ahead!
Will

Similar Messages

  • SCM 2007 Post Install Steps - Questions

    Hello,
    I'm installing SCM 2007 and have a questions on a coulpe of the post steps.
    1. 5.18 BI-Specific Post-Installation Steps (pg 107 of install guide).  Has anyone done these steps and can you explain them to me?  It looks like it's wanting me to do a client copy.  I already did one of those as part of the post insall steps.  Are these steps to be done in the BI system or the SCM system.  Thank you.
    5.18 BI-Specific Post-Installation Steps
    After you have installed the SAP SCM system , you need to perform the following post-installation
    steps for BI ABAP.
    Procedure
    1. Import additional languages (optional).
    2. Apply all Support Packages.
    3. Create the logical system as follows:
    a) Log on to the SAP system and call transaction SPRO.
    b) Choose Integration with SAP components Integration via APO Core Interface (CIF) Basic Settings for
    Creating the System Landscape Name Logical Systems .
    Note
    For more information about the conventions for the creation of logical systems see SAP
    Notes 155009 and 423184.
    4. Maintain a client.
    5. Assign the logical system to the new client:
    a) Call transaction SPRO.
    b) Choose Integration with SAP components Integration via APO Core Interface (CIF) Basic Settings for
    Creating the System Landscape Assign Logical Systems to a Client .
    Note
    If you need more than one client, repeat steps 4 and 5.
    6. Log on to one of the new clients with sap/pass.The creation of the user sap can be disabled
    with the parameter login/no_automatic_user_sapstar.
    7. Install the liveCache according to the documentation Installation Guide SAP liveCache for NetWeaver 7.0,
    available on SAP Service Marketplace at http://service.sap.com/install70.
    8. Copy client 000 by using transaction SCCL with user profile SAP_CUST.
    9. Set parameter login/system_client = <one of the new clients (e.g. productive
    client)> in the default profile or in the instance profile. For more information, see SAP Notes
    116432 and 116520.
    Do not change this profile setting after you executed step 12.
    10. Stop and restart the system in order to activate the default profile.
    11. Log on to the new client that was set in step 10.
    2. 5.21 Activating Services for the Web UI for SAP Supply Network Collaboration (SAP SNC).  It tells me to look in Solution Manager to see which services I need to activate.  Can someone describe where I find that in Solution Manager or which services I need to activate?  Thank you.
    5.21 Activating Services for the Web UI for SAP Supply
    Network Collaboration (SAP SNC)
    To be able to use the web user interface for SAP SNC, you must activate services with transaction
    HTTP Service Hierarchy Network (transaction code SICF).
    For more information, see the configuration documentation for one of the following SAP SNC
    scenarios in SAP Solution Manager under:
    n Solutions SAP for Automotive Scenarios Supplier Managed Inventory/Release Processing/Web-Based Supplier
    Kanban Solutions
    5 Post-Installation
    5.22 Post-Installation Steps for SCM Replenishment Workbench for Store (SCMRWBS)
    n Solutions SAP for Consumer Products Scenarios Responsive Replenishment
    n Solutions SAP for High Tech Scenarios Contract Manufacturing Procurement/Supply Network Inventory/Work
    Order Collaboration
    Choose the chapter Basic Settings for SAP Supply Network Collaboration Maintaining Settings for Service and
    Single Sign-On Activation
    I appreciate any assistance - Thank you.
    ~TJ

    HI,
    Are you able to install SCM 2007?

  • I just bought a 2009 macbook pro with an os upgrade to lion. my question is how do i take the previous owners name (like when i bluetooth) to my name???

    I just bought a 2009 macbook pro with an os upgrade to lion. my question is how do i change the previous owners name (like when i bluetooth) to my name???

    Your MBP should have been given to you with the original installation disks and OS.  The Lion OS is licensed to the person who sold it to you.  You will have create your own account and purchase Lion if you wish to use it.  Those are the stipulations in the licensing agreements.
    Ciao.

  • Obsolete BAPI changes SCM Upgrade

    Hi All,
    we are working on SCM upgrade 7.0.There are obsolete BAPI's which at used needs to be repalced by new bapi's.
    but the structure of two is different, few fields are not available in new BAPI.Specifically Quota BAPI : BAPI_QTASRVAPS_SAVEMULTI  (partner location, plan_number,partner type fields are missing ) and BAPI_MOSRVAPS_SAVEMULTI2 (is_master flag is not available)  bapi.
    Pls  tell me the way to map the two.
    Thanks,
    shruti

    Hi,
    Have you checked upgrade guide in SAP service marketplace:
    Installation & Upgrade Guides
    -> SAP Business Suite Applications
    -> SAP SCM
    -> Using SAP enhancement package 3 for SAP SCM Server 7.0
    -> SAP SCM 7.0 EHP 3 Upgrade Master Guide
    It should help.
    BR

  • SCM Upgrade.

    Hello Experts,
    Currently, we are on SCM 5.0 & would be moving to latest version. I hope he latest version in SCM 7.0 & new EHP 1 has been released (correct me if I am wrong).
    As it would be the first upgrade for me, can you please throw light on major points which should be considered.
    I have few concerns, how Z- reports, Live Cache & ICH. would be impacted ? Please let me know if you have more question.
    Regards
    Rahul Chitte

    Hi
    First of all, yes EHP1 has been released.
    Secondly there are two very good threads that discuss a lot of aspects of Upgrades to SCM 7 on the forum:
    [Upgrade to SCM 7.0;
    [SCM 5.1 / SCM2007 Upgrade;
    It is worth reading through those first which may answer quite a few of your questions.
    Regards
    Ian

  • SAP SCM Upgrade-Issue in STARTSAT_TRANS in execution phase

    Hi Experts,
    I am running sap upgrade of SCM 5.1 to SCM 7.0 EHP3.
    My Environment is
    OS : windows server 2008 R2
    Source Kernel :720_ext_rel
    DB: MS SQL server
    In Execution phase i have encountered issue with MAIN_SWITCH/STARTSAP_TRANS phase and below are the error details and log.
           Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
    Last error code set: Process C:\usr\sap\SCN\DVEBMGS51\exe/sapcontrol.exe exited with 2, see 'C:\usr\sap\SCN\SUM\abap\log\SAPup.ECO' for details<br/> System start failed    
    SAPup.ECo log details :
    30.05.2014 02:05:28
    StartWait
    FAIL: Timeout
    SAPup> Process with PID 15804 terminated with status 2 at 20140530020528!
    SAPup> Starting subprocess in phase 'STARTSAP_TRANS' at 20140530020528
        ENV: DBMS_TYPE=mss
        ENV: JAVA_HOME=C:\j2sdk1.4.2_26-x64
        ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1;.MSC
        ENV: PATH=C:\usr\sap\SCN\DVEBMGS51\exe;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\j2sdk1.4.2_26-x64\bin;C:\Program Files (x86)\Java\jre6\bin;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\usr\sap\SCN\SYS\exe\nuc\NTAMD64
        ENV: SAPSYSTEMNAME=SCN
        ENV: dbs_mss_schema=scn
    EXECUTING C:\usr\sap\SCN\DVEBMGS51\exe\sapcontrol.exe -format script -prot PIPE -host SCM51NUN -nr 51 -function GetProcessList
    30.05.2014 02:05:28
    GetProcessList
    OK
    0 name: msg_server.EXE
    0 description: MessageServer
    0 dispstatus: GREEN
    0 textstatus: Running
    0 starttime: 2014 05 30 01:46:21
    0 elapsedtime: 0:19:07
    0 pid: 4640
    1 name: enserver.EXE
    1 description: EnqueueServer
    1 dispstatus: GREEN
    1 textstatus: Running
    1 starttime: 2014 05 30 01:46:21
    1 elapsedtime: 0:19:07
    1 pid: 5144
    2 name: disp+work.EXE
    2 description: Dispatcher
    2 dispstatus: YELLOW
    2 textstatus: Running but Dialog Queue info unavailable
    2 starttime: 2014 05 30 01:46:22
    2 elapsedtime: 0:19:06
    2 pid: 6872
    in MMC  Dispatcher status is Yellow with text " Running but Dialog Queue info unavailable".  Is this the cause of this issue?
    If so, how to resolve this issue?
    Please help me resolve this issue.
    Thanks,
    Krishna

    Hi Jaun,
    here is the DEV_W0 log
    trc file: "dev_w0", trc level: 1, release: "720"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      51
    M sid        SCN
    M systemid   562 (PC with Windows NT)
    M relno      7200
    M patchlevel 0
    M patchno    500
    M intno      20020600
    M make       multithreaded, ASCII, 64 bit, optimized
    M profile    C:\usr\sap\SCN\SYS\profile\SCN_DVEBMGS51_SCM51NUN
    M pid        2840
    M
    M  kernel runs with dp version 139(ext=120) (@(#) DPLIB-INT-VERSION-139)
    M  length of sys_adm_ext is 376 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2840) [dpxxdisp.c   1381]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpIPCInit2: read dp-profile-values from sys_adm_ext
    M  DpShMCreate: sizeof(wp_adm) 22880 (1760)
    M  DpShMCreate: sizeof(tm_adm) 4976768 (24760)
    M  DpShMCreate: sizeof(wp_ca_adm) 56000 (56)
    M  DpShMCreate: sizeof(appc_ca_adm) 56000 (56)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/776048/776064
    M  DpShMCreate: sizeof(comm_adm) 776064 (1528)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm) 0 (232)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm) 0 (80)
    M  DpShMCreate: sizeof(vmc_adm) 0 (1864)
    M  DpShMCreate: sizeof(wall_adm) (25648/42880/64/104)
    M  DpShMCreate: sizeof(gw_adm) 48
    M  DpShMCreate: sizeof(j2ee_adm) 2032
    M  DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000FD20050, size: 5970896)
    M  DpShMCreate: allocated sys_adm at 000000000FD20060
    M  DpShMCreate: allocated wp_adm_list at 000000000FD22A20
    M  DpShMCreate: allocated wp_adm at 000000000FD22C10
    M  DpShMCreate: allocated tm_adm_list at 000000000FD28580
    M  DpShMCreate: allocated tm_adm at 000000000FD285D0
    M  DpShMCreate: allocated wp_ca_adm at 00000000101E7660
    M  DpShMCreate: allocated appc_ca_adm at 00000000101F5130
    M  DpShMCreate: allocated comm_adm at 0000000010202C00
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 00000000102C0390
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated gw_adm at 00000000102C0440
    M  DpShMCreate: allocated j2ee_adm at 00000000102C0480
    M  DpShMCreate: allocated ca_info at 00000000102C0C80
    M  DpShMCreate: allocated wall_adm at 00000000102C0D00
    M  DpCommAttachTable: attached comm table (header=0000000010202C00/ft=0000000010202C10)
    M  DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
    M  rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  <ES> EsILock: use spinlock for locking
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    X  mm.dump: set maximum dump mem to 192 MB
    X  mm.dump: set global maximum dump mem to 192 MB
    X  EsRegisterEmCheck: Register EmGetEsHandles at 0000000140D4F7D0
    M  DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
    M  ThStart: taskhandler started
    M  ThInit: initializing DIA work process W0
    M 
    M Fri May 30 05:23:47 2014
    M  ThInit: running on host SCM51NUN
    M 
    M Fri May 30 05:23:48 2014
    M  calling db_connect ...
    B  Loading DB library 'C:\usr\sap\SCN\DVEBMGS51\exe\dbmssslib.dll' ...
    B 
    B Fri May 30 05:23:49 2014
    B  Library 'C:\usr\sap\SCN\DVEBMGS51\exe\dbmssslib.dll' loaded
    B  Version of 'C:\usr\sap\SCN\DVEBMGS51\exe\dbmssslib.dll' is "720.00", patchlevel (0.442)
    C  Callback functions for dynamic profile parameter registered
    C  Thread ID:2040
    C  Thank You for using the SLODBC-interface
    C  Using dynamic link library 'C:\usr\sap\SCN\DVEBMGS51\exe\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    SAP patchlevel  0
    C    SAP patchno  500
    C    Last MSSQL DBSL patchlevel 0
    C    Last MSSQL DBSL patchno         442
    C    Last MSSQL DBSL patchcomment DBACOCKPIT Auto-injection fails (1901875)
    C  ODBC Driver chosen: SQL Server Native Client 10.0 native
    C  lpc:(local) connection used on SCM51NUN
    C  lpc:(local) connection used on SCM51NUN
    C  Driver: sqlncli10.dll Driver release: 10.50.4000
    C  GetDbRelease: 10.50.4000.00
    C  GetDbRelease: Got DB release numbers (10,50,4000,0)
    B  Connection 0 opened (DBSL handle 0)
    M  ThInit: db_connect o.k.
    M  ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
    I 
    I Fri May 30 05:23:53 2014
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF (addr: 0000000018410050, size: 4400000)
    M  SHM_ROLL_AREA (addr: 000007FFCB7C0050, size: 61440000)
    M  SHM_PAGING_AREA (addr: 0000000018850050, size: 32768000)
    M  SHM_ROLL_ADM (addr: 00000000098C0050, size: 632336)
    M  SHM_PAGING_ADM (addr: 000000000BA50050, size: 787488)
    M  ThCreateNoBuffer allocated 328144 bytes for 1000 entries at 0000000005600050
    M  ThCreateNoBuffer index size: 3000 elems
    M  ThCreateVBAdm allocated 17104 bytes (50 server) at 0000000002600050
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  ES initialized.
    X  mm.dump: set maximum dump mem to 192 MB
    X  mm.dump: set global maximum dump mem to 192 MB
    X  EsRegisterEmCheck: Register EmGetEsHandles at 0000000140D4F7D0
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 13, CON_ID = -1
    B  Table statistics is switched off.
    B  dbtbxbuf: Buffer TABL  (addr: 00000000312B0160, size: 30000000, end: 0000000032F4C4E0)
    B  dbtbxbuf: Buffer TABLP (addr: 0000000032F50160, size: 10240000, end: 0000000033914160)
    B  dbsync[db_syinit]: successfully attached to shared memory, sync_adm_p = 0000000002620050
    B  dbsync[db_syinit]: Buffer synchronisation started with
    B    sync_concept      = SEQ_NR
    B    sendon            = 0
    B    bufreftime        = 120
    B    max_gap_wait_time = 60
    B    ddlog_del_time    = 60
    B    last_counter      = 228455
    B    oldest_gap        = (2147483647,00000000000000)
    B    time_of_last_sync = 20140530052350
    B    MySysId           = 'SCM51NUN            51'
    B  dbexpbuf[EXP_SHB]: buffer EIBUF installed with
    B    semkey             = 35
    B    shmkey             = 54
    B    wp_n               = 13
    B    sclass             = 0
    B    block_length       = 256
    B    max_objects        = 2000
    B    max_obj_size       = 1948608
    B    pref_obj_size      = 0
    B    est_large_obj_size = 512000
    B    free_vec_lg        = 2001
    B    hash_vec_size      = 4001
    B    buffer_l           = 8388608
    B    max_blocks         = 30450
    B    free_blocks        = 30450
    B    mutex_n            = 4001
    B    max_mtx_wait_time  = 17000
    B    recovery_delay     = 500000
    B    tracing            = 0
    B    force_checks       = 0
    B    protect_shm        = 0
    B  dbexpbuf[EXP_SHM]: buffer ESM   installed with
    B    semkey             = 56
    B    shmkey             = 65
    B    wp_n               = 13
    B    sclass             = 0
    B    block_length       = 256
    B    max_objects        = 2000
    B    max_obj_size       = 907904
    B    pref_obj_size      = 0
    B    est_large_obj_size = 8192
    B    free_vec_lg        = 33
    B    hash_vec_size      = 4001
    B    buffer_l           = 4194304
    B    max_blocks         = 14189
    B    free_blocks        = 14189
    B    mutex_n            = 4001
    B    max_mtx_wait_time  = 17000
    B    recovery_delay     = 500000
    B    tracing            = 0
    B    force_checks       = 0
    B    protect_shm        = 0
    B  dbexpbuf[EXP_CUA]: buffer CUA   installed with
    B    semkey             = 30
    B    shmkey             = 47
    B    wp_n               = 13
    B    sclass             = 10
    B    block_length       = 256
    B    max_objects        = 1500
    B    max_obj_size       = 661696
    B    pref_obj_size      = 0
    B    est_large_obj_size = 49152
    B    free_vec_lg        = 193
    B    hash_vec_size      = 3001
    B    buffer_l           = 3072000
    B    max_blocks         = 10342
    B    free_blocks        = 10342
    B    mutex_n            = 3001
    B    max_mtx_wait_time  = 17000
    B    recovery_delay     = 500000
    B    tracing            = 0
    B    force_checks       = 0
    B    protect_shm        = 0
    B  dbexpbuf[EXP_OTR]: buffer OTR   installed with
    B    semkey             = 55
    B    shmkey             = 64
    B    wp_n               = 13
    B    sclass             = 13
    B    block_length       = 128
    B    max_objects        = 2000
    B    max_obj_size       = 907744
    B    pref_obj_size      = 0
    B    est_large_obj_size = 10240
    B    free_vec_lg        = 81
    B    hash_vec_size      = 4001
    B    buffer_l           = 4194304
    B    max_blocks         = 28373
    B    free_blocks        = 28373
    B    mutex_n            = 4001
    B    max_mtx_wait_time  = 17000
    B    recovery_delay     = 500000
    B    tracing            = 0
    B    force_checks       = 0
    B    protect_shm        = 0
    I  MPI: dynamic quotas disabled.
    I  MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    M  rdisp/thwpsf_critical_path : -1 -> 0
    M  Semaphore recovery: keep semaphore data.
    M  logoff_check: no check.
    M  CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
    M  CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
    G 
    G Fri May 30 05:23:54 2014
    G  RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )
    G  GetWritePermissionForShm( pLocation =  99, pEnforce = 1 )
    G  RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )
    S  *** init spool environment
    S  TSPEVJOB updates outside critical section: event_update_nocsec = 1
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 00000000098696A0
    S 
    S Fri May 30 05:23:55 2014
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  0 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 0000000015F100C0
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 0000000015F10460
    S    using messages for server info
    S  size of spec char cache entry: 165024 bytes (timeout 100 sec)
    S  size of open spool request entry: 1376 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A  ***GENER* Trace switched on ***
    A 
    A  ---PXA-------------------------------------------
    A  PXA INITIALIZATION
    A  PXA: Locked PXA-Semaphore.
    A  System page size: 4kb, total admin_size: 46436kb, dir_size: 45852kb.
    A  Attached to PXA (address 000007FFCF260050, size 800000K, 1 fragments of 753564K )
    A  PXA allocated (address 000007FFCF260050, size 800000K)
    A  abap/pxa = shared protect gen_local
    A  PXA: checking structure sizes: 752|216|16
    A  PXA INITIALIZATION FINISHED
    A  ---PXA-------------------------------------------
    A 
    A  ATRA: pfclock execution time = 1
    A  ABAP ShmAdm attached (addr=000007DFF8D7B000 leng=20955136 end=000007DFFA177000)
    A  >> Shm MMADM area (addr=000007DFF917BCD0 leng=257728 end=000007DFF91BAB90)
    A  >> Shm MMDAT area (addr=000007DFF91BB000 leng=16494592 end=000007DFFA176000)
    A  RFC Destination> destination SCM51NUN_SCN_51 host SCM51NUN system SCN systnr 51 (SCM51NUN_SCN_51)
    A  RFC Options> H=SCM51NUN,S=51,d=1,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 1
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    H  HTTP> Parameter icf/ssocookie_mandatory set to 0
    A  Hotpackage version: 21
    B  dbtran INFO (init_connection '<DEFAULT>' [MSSQL:720.00]):
    B   max_blocking_factor       =  50,  min_blocking_factor         =   5,
    B   max_in_blocking_factor    = 255,  min_in_blocking_factor      =  10,
    B   max_union_blocking_factor =  50,  min_union_blocking_factor   =   5,
    B   prefer_union_all          =   1,  prefer_join                 =   1,
    B   prefer_fix_blocking       =   0,  prefer_in_itab_opt          =   0,
    B   convert AVG               =   1,  alias table FUPD            =   0,
    B   escape_as_literal         =   0,                                  
    B   select *                  =0x00,  character encoding          =SBCS / []:X,
    B   use_hints                 = abap->1, dbif->0x1, upto->0
    M 
    M Fri May 30 05:23:56 2014
    M  ThrCreateShObjects allocated 26878 bytes at 0000000002640050
    Y  dyWpInit
    Y    ztta/dynpro_ara 800000
    Y    ztta/cua_ara    250000
    Y    ztta/diag_ara   250000
    M  rdisp/thsend_order : -1 -> 1
    M  ThISend: set thsend_order to 1
    N  SsfSapSecin: putenv(SECUDIR=C:\usr\sap\SCN\DVEBMGS51\sec): ok
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF library is C:\usr\sap\SCN\DVEBMGS51\exe\sapsecu.dll .
    N  ===...SSF default hash algorithm is SHA1 .
    N  ===...SSF default symmetric encryption algorithm is DES-CBC .
    N  ===...SECUDIR="C:\usr\sap\SCN\DVEBMGS51\sec"
    N  ===...loading of Security Toolkit completed with rc 5 (SSF_SUP_NOTALLFUNCTIONS).
    N  ===   SAPSECULIB Version 5.4.28M-6
    N  =================================================
    N 
    N Fri May 30 05:23:57 2014
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 1
    W    ITS Plugin: Release: 720, [7200.0.500.20020600]
    W    ITS Plugin: Int.version, [33]
    W    ITS Plugin: Feature set: [30]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    N  SignInit: Security Session Management cannot be used (ABAP parts are missing, note 1477428)
    N  VSI: WP init in ABAP VM completed with rc=0
    E  EnqId_Initialize: local EnqId initialization o.k.
    M  MBUF info for hooks: MS component UP
    M  ThISetEnqname: enq name = >SCM51NUN_SCN_51                         <
    M  ThActivateServer: STARTING => ACTIVE
    L  BtcSysStartRaise: Begin
    L  Raise event SAP_SYSTEM_START with parameter <SCM51NUN_SCN_51     >
    L  BtcSysStartRaise: End
    S  server @>SSRV:SCM51NUN_SCN_51@< appears or changes (state 1)
    M 
    M Fri May 30 05:23:58 2014
    M  30.05.2014 09:23:58.245 PID=2840, TID=2040 SapTimer info. v1.119 SynchCount:0 , OwnerPid: 3868, ErrsCount: 0, SapTime-WindowsUtcTime=-17 millisec (max=-17), Nosync=23 sec, SynchsPerDay=0.000000, MaxQpcTimeMinusWindowsTimeMismatch:  +0 millisec, TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=-17 millisec (*)
    A 
    A Fri May 30 05:24:03 2014
    A  UpdateProfile (new settings): off,krn_impl,(no dyn check),(no logging),(no stat err),(local generation),(no commit)
    A  UpdateProfile (new exceptions): (tmp_err),(home_err),(local_err)
    A  UpdateProfile (new version): 0
    A  ***GENER* Trace switched off ***
    B  dbdynpdb2: no VERSION column found in table DYNPSOURCE
    E 
    E Fri May 30 05:24:04 2014
    E  Enqueue Info: enque/use_pfclock2 = FALSE
    E  Enqueue Info: row condense enabled
    G  GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
    G 
    G Fri May 30 05:24:05 2014
    G  RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
    G  GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
    G  RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
    E  EnqId_EN_ObjShMem_Check: status = ENQID_API_INITIAL_VALUE
    E  EnqId inscribed into initial ObjShMem: (EnqId_EN_ObjShMem_Check)
    E  ---SHMEM--------------------------------------------------------------------------------
    E  EnqId:          EnqTabCreaTime/RandomNumber    = 30.05.2014 05:23:34  1401441814 / 3208
    E  ReqOrd at Srv:  TimeInSecs/ReqNumberThisSec    = 30.05.2014 05:24:05  1401441845 / 1
    E  ReqOrd at Cli:  TimeInSecs/ReqNumberThisSec    = 30.05.2014 05:24:05  1401441845 / 1
    E  Status:         STATUS_OK
    E  ----------------------------------------------------------------------------------------
    A  EXCP> Attribute IS_RESUMABLE not found in class CX_ROOT.
    B 
    B Fri May 30 05:24:06 2014
    B  table logging switched off for all clients
    Thanks,
    krishna

  • Sold my 3G, Upgraded to 4 - SIM Questions

    I posted this in the 3g section, but realized it probably belongs here. Sorry for the double post...
    Ok, I know it's a good idea to remove the sim card but hear me out.
    I just upgraded to the iphone 4 and sold my iphone 3g on ebay. The auction has already ended. I made a typo and said that the SIM card was included when I meant to say it wasn't.
    So, my question is... does it really matter? I've wiped the data from the phone, restored the phone as new, and wiped again for good measure. My phone number is active on the new micro-SIM in the iphone 4.
    Is there any security/privacy issue with shipping the old sim card to the buyer? I've contacted them to let them know, but if it's a moot point I'd rather just ship it than risk the negative feedback.
    Any help is appreciated.

    The SIM Card does not store any information unless it's a normal phone to iPhone. If you don't have a SIM Card with the old phone, they can get a SIM Card with their contract. They can also pull out the old SIM Card and put a new one in as long as it's a 3G SIM.
    After deactivating the old i3G, the SIM Card becomes useless.

  • 9i to 10g (10.2.0.4) Upgrade... some questions

    Hello,
    I am currently analysing the upgrade requirements for my organisation to upgrade our Backend databases from 9i to 10g (release 10.2.0.4).
    We are currently using a COTS application to interface the database. There are a number of things i am unsure of in regards to the prequisites etc that need to be completed.
    Oracle is running on the HP-UX Operating system, our DBA's are quite happy with the upgrade process so not many issues here.
    The questions i have are mainly from a Windows server interfacing point of view.
    What versions of ODBC drivers are needed to talk to 10g?
    Does the current version of SQL*Plus (8.0.5.0.0) need to be upgraded?
    Do the version of Oracle Reporting still work? (9.0.2.3.0)?
    Are there any deprecated SQL statements or such like that will be need to be checked for in current scripts / sql?
    Is there anything else i need to be aware of during the upgrade?
    Rgds,
    Andy Paton
    COTS Functional Analyst

    Hi Andy,
    10.2.0.4 is the latest release from Oracle. you can get more information from Metalink or oracle.com
    On Metalink you can fin 10g Database Upgrade Companion for answers to most of your questions
    Hope that helps
    Regards,
    Z.K.

  • IM3 upgrade to IM6 Amatuer Question...Does IM create HD by default?

    Sorry if this seems a like a bit of a simple question. I have recently upgraded to IM6 from IM 3.0.3.
    I'm just wondering if IM6 "HD" means that the projects I create and burn are High Definition by default?
    Thanks for any and all advice.
    Adam

    And just FYI: Currently the only way to "burn" HD content is with DVD Studio Pro. You can export H.264 which is an HD compliant standard.
    Daniel C. Slagle
    Keeper of the "Unofficial" iMovie FAQ
    http://iMovie.danslagle.com

  • SAP SCM Upgrade to 5.0, Material Master Initial Transfer Issue

    Dear Folks,
    We are doing an upgrade to SCM 5.0 for a client and are facing the issue of material master initial transfer. The changes to exising material like Proc type etc. travel seamlessly but while we try to create a new material in R/3 and transfer it to APO or if we delete an existing product in APO and re-transfer the material from R/3, it simply doesn't happen. We donot get any kind of errors also. We have tried various suggestions and solutions but all have failed. To summarize the activites that we have done to check the issue, please see the track below.
    Action                                                              Observation
    1. Observed queue blocks on R/3 and APO sides:            No blocks.
    2. “Important” logs on R/3 as well as APO side:                No error logs on CIF observed.
    3. Check material master data fields in R/3 relevant and necessary for APO: Done
    4. Check the APOKZ flag in MARC Table:                        Done
    5. Check OSS relevant notes for the issue:                      Done
    6. Check CIFMAT and MATLOC tables in APO:                Done
    7. Check the TRFCQIN and TRFCQOUT tables in APO     Done; nothing relevant to CIF observed.
    8. Debug CIF and find the issue                                       No breakthrough.
    9. Check location and location pre-requisites for CIF         Done
    Now we have raised OSS notes to SAP and are awaiting a solution.
    I request all Gurus to pitch-in and suggest possible issue here and perhaps a solution too. I am very hopeful that some one might have faced similar issue and have found a solution to the same.
    Warm Regards,
    Chandra

    This required packaging materials to be CIFed first before transferring the other materials. Issue resolved, SAP issues a note on this.

  • 10.4.3 upgrade & archive install = flashing question mark

    I upgraded to 10.4.3 reboot, flashing question mark appears.
    Tried everything, PRAM zap, NVRAM reset, pull battery for a day and unplug. Reset PMU.
    Tried combo update. Same flashing question mark. Boot from 10.4 DVD repair permissions all the time, repair disk, all is ok. Startup Disk selection to hard drive, see os x, reboot, flashing question mark again.
    Reboot + Option, pulls up view, no startup disk shows, except for 10.4 dvd.
    Target disk mode startup from another mac, boots up, run startup disk, shows the hard drive, select as startup, reboot, still flashing question mark.
    Re-install os 10.4 - install 10.4.2 upgrade, still flashing question mark.
    Have a Dual 1.2 G4 gig ethernet, 2gb ram, pulled out all but one ram chip tested booting with every different kind of ram configuration. Still flashing question mark.
    QUESTION: Has anyone been able to fix this issue? I see it all over and nothing that really solves it?

    i dont have a solution... but what you might want to do is reinstall 10.4.. upgrade to 10.4.2, reinstall everything you need and run yasu or cocktail..
    then with carbon copy cloner.. make a backup of your system to another hard drive..
    that way when 10.4.4 comes out... you can upgrade with out worrying if something bad happens.. hopefully by then theyll have everything worked out.

  • UPGRADING TO PALM TX QUESTIONS

    My company currentely uses serveral old Palms SPT1800 Palm OS v4.1 we use them for our company shows that we have through out the Country to scan our item barcodes and take orders and have them printed out so our customers have a copy of there order. We would like to upgrade to something faster like the Palm TX. With these old Palms we use the Infrared Reader on our printers HP 4050's. We use a third party software called ALO. My question is this will it process much faster, does it come equipted with the BarCode scanner and do we need to purchase newer printers with bluetooth technology?
    Thanks
    Ed
    Post relates to: Palm TX

    Hello and thank you for using the Palm Help Forums!
    I'll be glad to answer your questions for you. The Palm TX does support Infared (IR) technology. I don't think it will be much faster or anything seeing how IR is a slow method of transferring data or connected devices. It may be a more updated version of IR but I don't think it will be that much faster. This kind of answers another question you had; you won't have to upgrade to bluetooth printers. If you do however, the TX does support Bluetooth and Bluetooth is faster than IR.
    The Palm TX unfortunately does not have a barcode scanner on them. You can probably purchase a 3rd party add on for it but this cannot be supported by Palm. If you have any questions about bar code scanners for Palm devices you will want to seek 3rd party assistance.
    I hope this helps and let me know if you have any other questions or concerns. The Palm TX is a great device by the way, I'm sure you guys would love it.
    -Pat
    Post relates to: Treo 800w (Sprint)

  • Upgrading to 10.4 Questions:

    Hi,
    Upgrading to 10.4
    I have some questions about upgrading to Tiger 10.4
    This is my System, etc:
    I have a Power Mac G4 MDD Dual Boot 1.25 (SP) Model M9145LL/A. Running Panther 10.3.9 - 7W98 - Darwin 7.9.0
    2 New Internal SATA H.D.'s, and 2 GB's of Ram.
    A few months ago I added a Seritek 1S2 SATA Card and 2 WD SATA H.D.'s. I took the original 80 GB drive out and put it in a Firewire 400 OWC case, that has my OS and all my files on it, and it's bootable. I cloned it to my new Boot Drive a 640 GB WD with 2 partitions. One for OS and Programs and second partition for my files. My second new drive a 320 GB WD has 2 partitions, first one for Photoshop CS2 Scratch, and second partition for Video Scratch, for Popcorn, etc. I used Super Duper to clone. I got a lot of Great Advise on how to do this on the Apple Discussions Forum at the time I did this!
    I'm now running Panther 10.3.9 and very occasionally boot into 9.2.2
    My Original System came with Jaguar 10.2.7 then Upgraded to Panther 10.3
    Then did the updates to 10.3.9
    I want to upgrade my OS to be able to get the newer versions of Safari and Firefox and heard that Tiger runs CS2 better and is a more stable OS overall. Eventually want to do the updates to 10.4.11 which I hear is the best thing to do.
    MY QUESTIONS:
    Part 1:
    I want to Upgrade to 10.4 Tiger. I currently have a Dual Boot System running 10.3.9 and 9.2.2
    I would like to install a "Fresh" OS of Tiger "Only" as my new OS. Can I do this by using the "Archive and Install" Option?
    Would Using This Option give me a Tiger Only new OS, omitting OS 9? And can I do this with a Upgrade or do I need a Full Version of Tiger?
    To be able to Keep my Internet and Mail and other System Prefs the way they are now without having to reconfigure them, would choosing "Preserve User and Network Settings", take care of this?
    Also, before doing all of this, should I use Disk Utility to Verify and Repair the volume? If so, do I use Disk Utility from the New Tiger Upgrade DVD or do I have to use the Disk Utility that came with my Panther 10.3 Upgrade C.D.'s?
    What would be the Steps to do this?
    Part 2:
    (I know I have to find a Machine Specific Black DVD-ROM of Tiger 10.4) Will I have to Register this Upgrade? Will it have a New Serial Number or Not? Because I know it's hard to find these, if I found a person who has the right DVD for my machine at a good price, I was wondering if this Upgrade needed to be Registered or not to be able to use it, and get the Updates etc?? Or do I have to buy a Brand New Retail Version if I can find one, from an online store? Do you know of any online stores that have a Tiger Upgrade?
    Part 3:
    Will I also have to Upgrade my Norton Antivirus to a Newer Version for Tiger? I have version 9.0.4 now. What version do I need for Tiger?
    I would Really Appreciate some answers to my questions and any other advice on doing this Upgrade Right.
    Thank You.

    Hi...I finally found an Upgrade for Tiger at AllMac.com
    http://www.allmac.com/shop/productinfo.php?cPath=5_10003&productsid=6911
    The one I got also, included an extra CD with Updaters to OS 10.4.11 along with Java and Security .dmg files.
    After loading it all in and updating the OS to 10.4.11, I used Apple Software Update to download the Latest Java and Security updates. Also, got the Latest versions of Safari and Firefox.
    All seems to be running OK. And didn't have any problems with Photoshop CS2 activation or running. Didn't have any problems with the latest Security Updates, as well.
    Thank you.

  • SCM Upgrade 4x to 7 Macros have issues not functioning as expected

    Hi All,
    We have upgraded SCM 4x to 7 and some of macros are not functioning as expected.
    This is a start macro Specifically for lay out attributes macro where many of the key figures are editable, which are not suppose to be.
    I have deactivated and activated, I have also verified the syntax of the production and quality macros. I did not find any difference. but behaving differently.
    Please share your thoughts any one come across this kind of issues.
    Appreciate your help.
    Thanks,
    Sreeni

    Sreeni,
    When you upgraded from 4.1 to 7.X, did you have to go throuh any interim steps like to 5.0 or 5.1 first.
    My understanding is that you can go from 4.1 directly to 7.0.
    Can you share your experience. Do you have any lessons learned that you put into a document that you would share.
    Shane

  • Upgrading kt4v mobo, some questions

    hi,
    recently I bought a Kt4v mobo, but I still use an amd 1.2 ghz duron as processor, therefore my mobo is set to 100fsb atm with is bad  ;(
    I'm thinking about upgrading to an AMD athlon but I have some questions.
    I'd like to get my FSB at 166, I'm currently using 2 256mb DDR ram sticks with a speed of 333mhz, is that possible?
    (well, actualy one is 400mhz, but as this mobo only supports one stick of ddr400, it's set to 333)
    what is the fastest Processor my mobo can handle with that kind of ram?
    and should I change other speeds when installing it like my AGP bus speed etc.. to prevent them beiing damaged after upping the fsb?
    that's all, If someone could answer these I'd be very gratefull, thx
    oh yeah, specs:
    AMD duron 1.2 ghz 200fsb
    KTV4 MSI mobo
    Point of view Geforce 4 TI 4280 128mb
    512 MB DDR 333mhz
    Maxtor 80 gig 7200rpm
    samsung 20 gig 5400rpm
    Logitech mx 700 mouse
    wondows XP Pro
    3com nic etc etc etc

    Quote
    or is it set automatically?
    Yepp!
    Quote
    are Athlon Xp's unlocked by default...should set the multiplier like this then: 12.5 X 166= 2158 mhz
    Just let the board handle it, all bios-settings on AUTO.
    Quote
    250 watt which might be on the low side
    I think the board wouldn't even boot... :D
    Psu should have more then 25A/3.3V, 35A/5V and 200W combined power.

Maybe you are looking for

  • MacBook Pro goes to sleep, doesnt wake up!

    I recently bought a new MacBook Pro, and have noticed that this problem started since I downloaded a widget: Deep Sleep, which basically allows the Mac to go onto a Hibernate mode. I have uninstalled it now but the problem still persists, so I am not

  • Stop: C0000135 The program can't start because %hs is missing from your computer

    Im helping my aunt work on her computer. When you turn it on it says Stop: C0000135 The program can't start because %hs is missing from your computer on a blue screen. Its a Satallite C655-S5132. Please help. Thanks

  • How to make my own grid and perform a "snap to grid" effect?

    Hi! I am a newbie in flash and I am trying to create a puzzle like game (a chinese puzzle game called tangram). I am wondering what kind of functions should I use to create a "triangular" grid i.e. something similar to this ? http://img40.imageshack.

  • Best option for Backup of HDV Files

    I'm just finishing a project and will be needing my harddrive space for the next one, and I'm wondering how best to store HDV footage NOT ON MY HARDDRIVE? (Not that I don't trust them, just don't like having all my eggs in one basket). There's not a

  • Oracle 10g HTMLDB license

    Hi I am currently running oracle 9i . Recently I request oracle 10g companion cd from oracle (we have a annual silver support with oracle).I have installed the feature 'HTMLDB' into my oracle 9i. Everything seem to work fine .My concern is whether I