SCOM 2012 - if it stops alerting how can I be notified

on occasions i have noticed that alerts have stoped coming into SCOM and we have had to either restart the managment server or at least restart services.
The problem has been that my team have not picked up on the fact it has stoppedalerting for several hours.I am looking for a simple solution so that someone gets emailed if SCOM stops giving out alerts, lets say for example SCOM hasn't had an alert for 3
hours.
Has anyone implmented a simple solution for this?
tamrep

If you monitor SCOM itself then a solution is to set the SCOM RMSE and the management servers as "Agentless" from some other SCOM Management group. This is how I used to monitor SCOM itself. This has been suggested by many SCOM experts too. Remember that
never install SCOM agents on the RMSE and MS, that can break your whole SCOM functioning.
You can install SCOM agents on your SCOM DB and DW, reporting server from any other SCOM group. That is fine.
This in my opinion is the easiest solution along with the one that I proposed above. I have been using these two solutions for long time now.
Hope this helps you too.
Thanks, S K Agrawal

Similar Messages

HT1222 Wheb I try to update iTune I am getting a message "the site has not a valid signature" and the downloading is stopped. How can I fix IT?

Wheb I try to update iTune I am getting a message "the site has not a valid signature" and the downloading is stopped. How can I fix IT?
I am using windows 7 64

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

ICal on my Macbook has always grayed the current date. iCal on my MacMini (both 10.5.8) never has until a few days ago but has since stopped. How can I get it to "shade" again?

iCal on my Macbook has always grayed the current date. iCal on my MacMini (both 10.5.8) never has until a few days ago but has since stopped. How can I get it to "shade" again?

At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

My itunes has stopped responding how can I get it working again

My itunes has stopped responding how can I get it working again?

I have a related issue (I think, hard to know for sure from the short frustrated post above).
Since the last update of iTunes (11.0.5), it kind of freezes while checking for and downloading new podcasts. Processor load goes to 100% (sometimes above! figure from Swedish OSX "Aktivitetskontroll" which I can imagine is something like "Activity Control" or "Activity Manager" in English OSX) and stays there for a few minutes, 3-5 minutes is common. During that time the mouse pointer turns into a spinning ball when moved above iTunes. Other apps work ok meanwhile. (Four processors)
Have a fixed connection to the internet, which I have tested while iTunes is frozen. We acheive above 100 Mbit/s downstream, 20 Mbit/s upstream, so the connection shouldn't be the problem.
Any ideas on what to do?
iTunes 11.0.5 (Swedish)
MacOSX 10.8.4 (Swedish)
iMac 27", late 2009 http://support.apple.com/kb/SP576

My reset/sleep button on my iPhone 4 has just stopped working, how can I fix this??

My reset/sleep button on my iPhone 4 has just stopped working , how can I fix this??

Hi Hamish1P,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like an app you installed is not working. I would recommend that you read this article, it may be able to help the issue.
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Cheers,
Mario

HT1338 built in camera has stopped working, how can I update or reinstall the drivers

Built in camera has stopped working, how can I reinstall the respective drivers?

Here are my best suggestions for your camera problem, Stephen:
• If you have not already done so, shut down Mac, restart,
    and try again. If the camera still does not work, continue.
• Try ALL relevant suggestions from Apple's Troubleshooting
   article: http://support.apple.com/kb/HT2090
(Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
   If you need to use the "reset" suggestion, use the correct reset for your Mac.
• Use your Mac's Disk Utility to repair permissions and then
   download and apply the latest Combo Update. For your Mac OS,
   the current version is at http://support.apple.com/kb/DL1640
• Repair permissions again immediately following the system restart
   that completes the Combo update.
Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.
• If nothing else resolves your problem, yours is likely a hardware issue.
   Unless you have a current backup, make one now.
Then use the final "Troubleshooting" suggestion:
"... contact Apple or an Apple-Authorized Service Provider for service."
Message was edited by: EZ Jim
Mac OSX 10.8.3

HT201412 If the on/off button at the top of my iphone stopped working, how can i shutdown the phone and rebot?

If the on/off button at the top of my iphone stopped working, how can i shutdown the phone and rebot?

Use Assistive Touch. Settings App > General > Accessibility > Assistive Touch > Device > Lock Screen. To turn OFF, hold down on the lock screen until slide to power off appears. To turn ON, connect iPhone to power, charger or USB port of computer.

The on/off button at the top of my iphone stopped working, how can i repair it? iPhone 4S

the on/off button at the top of my iphone stopped working, how can i repair it?
iPhone 4S, iOS 7.0.4

Use Assistive Touch. Settings App > General > Accessibility > Assistive Touch > Device > Lock Screen. To turn OFF, hold down on the lock screen until slide to power off appears. To turn ON, connect iPhone to power, charger or USB port of computer.

TS3989 getting this message every time "apple photostream.exe has stopped working", how can I fix it?

getting this message every time "apple photostream.exe has stopped working", how can I fix it?

Uninstall and then reinstall the iCloud control panel on your computer.

I bourgt 10.7 Lion, but i cnt´t install it. All the last updates are downloaded. I see the sign of the lion, but not clear- there stand the download stopped. How can i continue the download?

i bourgt 10.7 Lion, but i cnt´t install it. All the last updates are downloaded. I see the sign of the lion, but not clear- there stand the download stopped. How can i continue the download?

In that case, drag the Lion installer from your application folder to the trash. Empty trash. Now press option key and click on 'purchased' tab. The button next to the Lion installer now should say 'install' click on that to download again.

I have learned that my sister often conference calls other people in to listen to our conversation without me knowing. Besides asking her to stop (obviously) how can I stop it?

I have learned that my sister ofen conference calls other people in to listening to our phone conversations. Obviously I have asked her to stop. How can I detect her doing it? How can I block her from doing it?

You would make this a little easier if you posted a link to the page.
Most of the jump seems to be some extra padding or margin between the tabs when you rollover, but I am not able to find it. Is there any other css that is governing this page? I did remove a couple of <p></p> set of tags you had and it improved the jump, but it is still there.
If the page is live, run it through the validator http://validator.w3.org/ , fix whatever errors it finds, if you still have the jump, post a link to the page and the issue might get found.
Gary

HT1725 I have a few songs that will only play for about a min the it will stop playing how can i get the songs back to a full song

I have a few songs that will only play for about a min the it will stop playing how can i get the songs back to a full song

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

My ipod touch 4th generation ipod camera stopped working how can i fix it?

My ipod touch 4th generation camera stopped working how can i fix it?

Basics from the manual are restart, reset, restore.
Try each of these.

My mac books audio stopped working, how can i fix it? New to Mac.

My mac books audio stopped working, how can i fix it? New to Mac.

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH14222
    Do this twice
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:   "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Make sure that no box is checked under “Mute”.
6. System Preferences > Sound> Sound Effects
    Play sound effects through:
   Select "Internal speakers" and then back to "Selected sound output device".
7.Launch iTunes and play a song through headphone and adjust the volume

Web kit 2 stopped working how can i fix it

web kit 2 stopped working how can i fix it

try to close it (double tap the home button and you'll see the apps that are open and hold the app till they jiggle and you see the minus sign. press the minus sign on the camera app).
Do a reset and try it
Good luck

SCOM 2012 - if it stops alerting how can I be notified

Similar Messages

Maybe you are looking for