SCOM - How internally classes and properties, discovered and monitored
I am trying to understand how internally classes created instances, and how it runs in the agent, discovered and monitored in the state view.
Need to understand this for Create my own design and develop complete management pack, to display some hard coded value to be displayed in the state view. Both target and source will be my scom server itself.
Thanks and Regards,
Boopalan
Adding more info:
How to Create a State View
http://technet.microsoft.com/en-us/library/ff832979.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
SCOM SP1 Groups, Classes and SNMP
I've been working on a management pack using some of the examples on the net (Kristopher Bash from the operating-quadrantin has been a huge inspiration) to monitor an Isilon cluster. This had lead me to a number of interesting challenges to over come since I have to design this within the confines of SP1 and I have a unique networking to device configuration.
Device Overview:
The Isilon cluster itself is a number of FreeBSD systems (nodes) joined together via and infiniband backend to create a single NAS. While normally this would not be an issue, network connectivity to the device and SNMP response from the cluster have been. In my configuration I have a total of 8 nodes each node has 2 network interfaces. Of these 16 network interfaces only 2 are accessible/on the same network as my RMS (em1 node2, em1 node4).
Device SNMP Design:
While the cluster is highly dynamic the SNMP sub-systems are not. The MIB created by Isilon does not join the whole of the cluster into an index for SNMP polling. I can only poll a single nodes OID's. To over come this limitation Isilon implemented SNMP-Proxy or comtosec within the system. This allowed me to poll node 3 by changing the community name for the OID I was polling from the discovered name to <discoveredname>_node_3.
MP Design:
Now I'm not the best at MP design since I rarely work within SCOM so don't laugh too hard... I reused items from Kristopher's Cisco MP and created a number of classes for discovery and item hosting. To address the limitation I found within SCOM for dynamic discovery and 1 IP address 1 Community Name, I created a class property within the root called ConfiguredNodes. I can poll the Isilon an populate this value (8). Then I created a sub-class property value called NodeCommStr to fill in all the custom community names I generate using a VB script with Base64 encode/decode, the discovery community name and the ConfiguredNodes value, in the data source for sub-class discovery. public_node_1 public_node_2 etc...
All in all this is working well however I have run into a few design roadblocks and I have some questions.
1. When I discover a set of items within the Isilon cluster the health explorer is not sorting this information alphabetically. Is there a value I can include in the dependency roll-up to correct this?
2. I have run into an issue with the Isilon MIB and I'm looking for the best way to overcome the MIB's design. They included a fan table with fan information and speed of the fans however there is no status (success{0}, warning{1}, error{2}). I created a monitor type to compensate for this and included overrides for the warning and critical event points. This is where I found the curve ball, seems that the fans are not the same.... There are 2 sets of fans - Chassis and Power Supply - and they have different thresholds *rolls eyes*. Some I'm asking for the best design advice, should I create 2 classes, discoveries, monitor types, etc.? Or can I address this issue by creating 2 monitor types with a string filter?
3. I've been successful in creating this MP and displaying the information as a single device however I was wondering if there was a way to create dynamic groups with sub groups. This would have to be 100% dynamic since I can add a 9th 10th 192nd (yes 192) node to the cluster.
Cluster
-ClusterNode1
-ClusterNode1Power
-ClusterNode1Fans
-etc
The information is there in the NodeCommStr, I'm just in brain lock on how to design it right now.
Again, code is raw and a work in progress so please no giggling. Oh this is a multi post... Code is too long.
<Manifest>
<Identity>
<ID>IsilonSNMP</ID>
<Version>1.0.1.2</Version>
</Identity>
<Name>IsilonSNMP</Name>
<References>
<Reference Alias="MicrosoftSystemCenterNetworkDeviceLibrary">
<ID>Microsoft.SystemCenter.NetworkDevice.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Snmp">
<ID>System.Snmp.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="SystemHardwareLibrary">
<ID>System.Hardware.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Windows">
<ID>Microsoft.Windows.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="SystemPerformanceLibrary">
<ID>System.Performance.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="System">
<ID>System.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="SC">
<ID>Microsoft.SystemCenter.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Health">
<ID>System.Health.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
</References>
</Manifest>
<TypeDefinitions>
<EntityTypes>
<ClassTypes>
<ClassType ID="IsilonSNMP.Class.IsilonCluster" Accessibility="Public" Abstract="false" Base="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice" Hosted="false" Singleton="false">
<Property ID="Hostname" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
<Property ID="ConfiguredNodes" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
<!-- <Property ID="NodeCommStr" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" /> -->
</ClassType>
<ClassType ID="IsilonSNMP.Class.IsilonCluster.Nodes" Accessibility="Public" Abstract="false" Base="SystemHardwareLibrary!System.Chassis" Hosted="true" Singleton="false">
<Property ID="Name" Type="string" Key="true" CaseSensitive="false" Length="256" MinLength="0" />
</ClassType>
<ClassType ID="IsilonSNMP.Class.IsilonCluster.PhysicalDisk" Accessibility="Public" Abstract="false" Base="SystemHardwareLibrary!System.PhysicalDisk" Hosted="true" Singleton="false">
<Property ID="Index" Type="string" Key="true" CaseSensitive="false" Length="256" MinLength="0" />
<!-- <Property ID="ConfiguredNodes" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" /> -->
<Property ID="NodeCommStr" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
<Property ID="BayIndex" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
</ClassType>
<ClassType ID="IsilonSNMP.Class.IsilonCluster.PhysicalFan" Accessibility="Public" Abstract="false" Base="SystemHardwareLibrary!System.Fan" Hosted="true" Singleton="false">
<Property ID="Index" Type="string" Key="true" CaseSensitive="false" Length="256" MinLength="0" />
<Property ID="NodeCommStr" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
<Property ID="FanNumber" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
</ClassType>
<ClassType ID="IsilonSNMP.Group.IsilonClusters" Accessibility="Public" Abstract="false" Base="System!System.Group" Hosted="false" Singleton="true" />
</ClassTypes>
<RelationshipTypes>
<RelationshipType ID="IsilonSNMP.Relationship.ClusterHostsNodes" Accessibility="Internal" Abstract="false" Base="System!System.Hosting">
<Source>IsilonSNMP.Class.IsilonCluster</Source>
<Target>IsilonSNMP.Class.IsilonCluster.Nodes</Target>
</RelationshipType>
<RelationshipType ID="IsilonSNMP.Relationship.IsilonClustersGroupContainsIsilonClusters" Accessibility="Public" Abstract="false" Base="System!System.Containment">
<Source>IsilonSNMP.Group.IsilonClusters</Source>
<Target>IsilonSNMP.Class.IsilonCluster</Target>
</RelationshipType>
<RelationshipType ID="IsilonSNMP.Relationship.NodesHostsPhysicalDisk" Accessibility="Public" Abstract="false" Base="System!System.Hosting">
<Source>IsilonSNMP.Class.IsilonCluster.Nodes</Source>
<Target>IsilonSNMP.Class.IsilonCluster.PhysicalDisk</Target>
</RelationshipType>
<RelationshipType ID="IsilonSNMP.Relationship.NodesHostsPhysicalFan" Accessibility="Public" Abstract="false" Base="System!System.Hosting">
<Source>IsilonSNMP.Class.IsilonCluster.Nodes</Source>
<Target>IsilonSNMP.Class.IsilonCluster.PhysicalFan</Target>
</RelationshipType>
</RelationshipTypes>
</EntityTypes>
<ModuleTypes>
<DataSourceModuleType ID="IsilonSNMP.DataSource.BasicSNMPProbe" Accessibility="Internal" Batching="false">
<Configuration>
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="CommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="OID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
</OverrideableParameters>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval>$Config/Interval$</Interval>
<SyncTime />
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ProbeAction ID="SNMPProbe" TypeID="Snmp!System.SnmpProbe">
<IsWriteAction>false</IsWriteAction>
<IP>$Config/IPAddress$</IP>
<CommunityString>$Config/CommStr$</CommunityString>
<SnmpVarBinds>
<SnmpVarBind>
<OID>$Config/OID$</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
</SnmpVarBinds>
</ProbeAction>
<ConditionDetection ID="ValueFilter" TypeID="System!System.ExpressionFilter">
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String" />
</ValueExpression>
</SimpleExpression>
</Expression>
</ConditionDetection>
</MemberModules>
<Composition>
<Node ID="ValueFilter">
<Node ID="SNMPProbe">
<Node ID="Scheduler" />
</Node>
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>Snmp!System.SnmpData</OutputType>
</DataSourceModuleType>
<DataSourceModuleType ID="IsilonSNMP.DataSource.DiscoverContainmentClasses" Accessibility="Internal" Batching="false">
<Configuration>
<IncludeSchemaTypes>
<SchemaType>System!System.ParamListSchema</SchemaType>
<SchemaType>System!System.Discovery.MapperSchema</SchemaType>
</IncludeSchemaTypes>
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="ClassID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="InstanceSettings" type="SettingsType" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval>60</Interval>
<SyncTime />
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ConditionDetection ID="Mapper" TypeID="System!System.Discovery.ClassSnapshotDataMapper">
<ClassId>$Config/ClassID$</ClassId>
<InstanceSettings>$Config/InstanceSettings$</InstanceSettings>
</ConditionDetection>
</MemberModules>
<Composition>
<Node ID="Mapper">
<Node ID="Scheduler" />
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>System!System.Discovery.Data</OutputType>
</DataSourceModuleType>
<DataSourceModuleType ID="IsilonSNMP.DataSource.DiscoverCluster" Accessibility="Internal" Batching="false">
<Configuration>
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="IP" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="CommunityString" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="SystemOID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
</OverrideableParameters>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval Unit="Seconds">$Config/Interval$</Interval>
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ProbeAction ID="Probe" TypeID="Snmp!System.SnmpProbe">
<IsWriteAction>false</IsWriteAction>
<IP>$Config/IP$</IP>
<CommunityString>$Config/CommunityString$</CommunityString>
<SnmpVarBinds>
<SnmpVarBind>
<OID>.1.3.6.1.4.1.12124.1.1.4.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.4.1.12124.1.1.1.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.5.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.1.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.4.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.6.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.2.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
</SnmpVarBinds>
</ProbeAction>
<ConditionDetection ID="Mapper" TypeID="System!System.Discovery.FilteredClassSnapshotDataMapper">
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery>/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>1.3.6.1.4.1.12124.</Pattern>
</RegExExpression>
</Expression>
<ClassId>$MPElement[Name="IsilonSNMP.Class.IsilonCluster"]$</ClassId>
<InstanceSettings>
<Settings>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</Name>
<Value>$Data/Source$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/Name$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[5]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemDescription$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[4]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemContact$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[3]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemLocation$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[2]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemOID$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[1]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[5]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="IsilonSNMP.Class.IsilonCluster"]/Hostname$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[6]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="IsilonSNMP.Class.IsilonCluster"]/ConfiguredNodes$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[7]/Value$</Value>
</Setting>
</Settings>
</InstanceSettings>
</ConditionDetection>
<ConditionDetection ID="SystemOIDFilter" TypeID="System!System.ExpressionFilter">
<Expression>
<RegExExpression>
<ValueExpression>
<Value>$Config/SystemOID$</Value>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>1.3.6.1.4.1.12124.</Pattern>
</RegExExpression>
</Expression>
</ConditionDetection>
</MemberModules>
<Composition>
<Node ID="Mapper">
<Node ID="Probe">
<Node ID="SystemOIDFilter">
<Node ID="Scheduler" />
</Node>
</Node>
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>System!System.Discovery.Data</OutputType>
</DataSourceModuleType>
<DataSourceModuleType ID="IsilonSNMP.DataSource.DiscoverPhysicalDisk" Accessibility="Internal" Batching="false">
<Configuration>
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="CommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="ConfiguredNodes" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="BayIndex" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="NodeCommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
</OverrideableParameters>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval>$Config/Interval$</Interval>
<SyncTime />
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ProbeAction ID="ScriptDiscovery" TypeID="Windows!Microsoft.Windows.ScriptDiscoveryProbe">
<ScriptName>DiscoverIsilonDisk.vbs</ScriptName>
<Arguments>$Config/IPAddress$ $Config/CommStr$ $MPElement$ $Target/Id$ $Config/ConfiguredNodes$</Arguments>
<ScriptBody>
<![CDATA['Discover PhysicalDisk
Dim oAPI, oDiscoveryData, oInst, objWMIServices, objWMILocator, oArgs
set oArgs = Wscript.Arguments
if oArgs.Count <5 Then
Wscript.Quit -1
End If
DeviceIP = oArgs(0)
CommStr = oArgs(1)
SourceID = oArgs(2)
ManagedEntityId = oArgs(3)
StrConfiguredNodes = oArgs(4)
CommStr = Decode(CommStr)
ConfiguredNodesCommStr = cstr(CommStr)
wscript.echo CommStr
Set oAPI = CreateObject("MOM.ScriptAPI")
set oDiscoveryData = oAPI.CreateDiscoveryData(0, SourceId, ManagedEntityId)
Set objWMILocator = CreateObject("WbemScripting.SWbemLocator")
Set objWMIServices = objWMiLocator.ConnectServer("","root\snmp\localhost")
'Name community name
GetPhysicalDisks
'Created community names
For i = 1 to StrConfiguredNodes
CommStr = ConfiguredNodesCommStr & "_node_" & i
GetPhysicalDisks
Next
'Return all data to SCOM
Call oAPI.Return(oDiscoveryData)
Sub GetPhysicalDisks
on error resume next
Set objWmiNamedValueSet = CreateObject("WbemScripting.SWbemNamedValueSet")
objWmiNamedValueSet.Add "AgentAddress", cstr(DeviceIP)
objWmiNamedValueSet.Add "AgentReadCommunityName", cstr(CommStr)
Set colPhysicalDisk = objWmiServices.InstancesOf("SNMP_ISILON_MIB_diskTable", , objWMINamedValueset)
For each objItem in colPhysicalDisk
nIndex = objItem.diskBay
sDesc = objItem.diskSerialNumber
if nIndex > 0 then
set oInst = oDiscoveryData.CreateClassInstance("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalDisk']$")
call oInst.AddProperty("$MPElement[Name='MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice']/IPAddress$", DeviceIP)
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalDisk']/Index$", cstr(CommStr) & "-" & cdbl(nIndex))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalDisk']/NodeCommStr$", Encode(CommStr))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalDisk']/BayIndex$", cdbl(nIndex))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.Nodes']/Name$", "Cluster")
call oInst.AddProperty("$MPElement[Name='System!System.Entity']/DisplayName$", "SNMP Host " & cstr(CommStr) & " - Bay " & nIndex & " - Serial Number " & HexToString(sDesc))
'call oInst.AddProperty("$MPElement[Name='System!System.Entity']/DisplayName$", HexToString(sDesc))
call oDiscoveryData.AddInstance(oInst)
'Test Section
'wscript.echo Base64Encode(CommStr)
'wscript.echo Base64Encoder(CommStr)
'wscript.Echo CommStr
'wscript.Echo nIndex
'Wscript.Echo HexToString(sDesc)
'wscript.echo cdbl(nIndex) & cstr(CommStr)
end if
Next
on error goto 0
End Sub
Function Decode(strB64)
strXML = "<B64DECODE xmlns:dt=" & Chr(34) & _
"urn:schemas-microsoft-com:datatypes" & Chr(34) & " " & _
"dt:dt=" & Chr(34) & "bin.base64" & Chr(34) & ">" & _
strB64 & "</B64DECODE>"
Set oXMLDoc = CreateObject("MSXML2.DOMDocument.3.0")
oXMLDoc.LoadXML(strXML)
decode = oXMLDoc.selectsinglenode("B64DECODE").nodeTypedValue
set oXMLDoc = nothing
End Function
Function Encode(Str)
'Use ADODB.Stream to write Ansi string to Unicode stream
Set objStream = CreateObject("ADODB.Stream")
objStream.Type = 2
objStream.Open
objStream.Charset = "unicode"
objStream.WriteText Str
objstream.Flush
'Read the stream back as a byte array
objStream.Position = 0
objStream.Type = 1
temp = objstream.read(2) 'read two bytes of the stream to discard the byte order mark
bArray = objStream.Read
objStream.Close
'Convert byte array to Base64
set objXML = createobject("MSXML2.DOMDocument.3.0")
Set objNode = objXML.createElement("b64")
objNode.dataType = "bin.base64"
objNode.nodeTypedValue = bArray
Encode = objNode.Text
Set Stream = Nothing
set objNode = nothing
set objXML = nothing
End Function
Function HexToString(str)
on error resume next
sOutput = ""
For x = 1 To len(str) Step 2
sChar = Chr(Clng("&h" & Mid(str,x,2)))
sOutput = sOutput & sChar
Next
if err.number = 0 then
HexToString = sOutput
Else
HexToString = str
end if
End Function
set oInst = nothing
set oDiscoveryData = nothing
set oArgs = nothing
set oAPI = nothing
set objWMILocator = nothing
set objWMIServices = nothing
set objWMINamedValueSet = nothing
]]>
</ScriptBody>
<TimeoutSeconds>120</TimeoutSeconds>
</ProbeAction>
</MemberModules>
<Composition>
<Node ID="ScriptDiscovery">
<Node ID="Scheduler" />
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>System!System.Discovery.Data</OutputType>
</DataSourceModuleType><DataSourceModuleType ID="IsilonSNMP.DataSource.DiscoverPhysicalFan" Accessibility="Internal" Batching="false">
<Configuration>
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="CommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="ConfiguredNodes" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="FanNumber" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="NodeCommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="FanSpeedHighCritical" type="xsd:integer" />
<xsd:element minOccurs="1" name="FanSpeedLowWarn" type="xsd:integer" />
<xsd:element minOccurs="1" name="FanSpeedLowCritical" type="xsd:integer" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedHighCritical" Selector="$Config/FanSpeedHighCritical$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedLowWarn" Selector="$Config/FanSpeedLowWarn$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedLowCritical" Selector="$Config/FanSpeedLowCritical$" ParameterType="int" />
</OverrideableParameters>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval>$Config/Interval$</Interval>
<SyncTime />
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ProbeAction ID="ScriptDiscovery" TypeID="Windows!Microsoft.Windows.ScriptDiscoveryProbe">
<ScriptName>DiscoverIsilonPhysicalFan.vbs</ScriptName>
<Arguments>$Config/IPAddress$ $Config/CommStr$ $MPElement$ $Target/Id$ $Config/ConfiguredNodes$</Arguments>
<ScriptBody>
<![CDATA['Discover PhysicalFan
Dim oAPI, oDiscoveryData, oInst, objWMIServices, objWMILocator, oArgs
set oArgs = Wscript.Arguments
if oArgs.Count <5 Then
Wscript.Quit -1
End If
DeviceIP = oArgs(0)
CommStr = oArgs(1)
SourceID = oArgs(2)
ManagedEntityId = oArgs(3)
StrConfiguredNodes = oArgs(4)
CommStr = Decode(CommStr)
ConfiguredNodesCommStr = cstr(CommStr)
wscript.echo CommStr
Set oAPI = CreateObject("MOM.ScriptAPI")
set oDiscoveryData = oAPI.CreateDiscoveryData(0, SourceId, ManagedEntityId)
Set objWMILocator = CreateObject("WbemScripting.SWbemLocator")
Set objWMIServices = objWMiLocator.ConnectServer("","root\snmp\localhost")
'Name community name
GetPhysicalFan
'Created community names
For i = 1 to StrConfiguredNodes
CommStr = ConfiguredNodesCommStr & "_node_" & i
GetPhysicalFan
Next
'Return all data to SCOM
Call oAPI.Return(oDiscoveryData)
Sub GetPhysicalFan
on error resume next
Set objWmiNamedValueSet = CreateObject("WbemScripting.SWbemNamedValueSet")
objWmiNamedValueSet.Add "AgentAddress", cstr(DeviceIP)
objWmiNamedValueSet.Add "AgentReadCommunityName", cstr(CommStr)
Set colPhysicalFan = objWmiServices.InstancesOf("SNMP_ISILON_MIB_FanTable", , objWMINamedValueset)
For each objItem in colPhysicalFan
nIndex = objItem.fanNumber
sDesc = objItem.fanDescription
if nIndex > 0 then
set oInst = oDiscoveryData.CreateClassInstance("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalFan']$")
call oInst.AddProperty("$MPElement[Name='MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice']/IPAddress$", DeviceIP)
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalFan']/Index$", cstr(CommStr) & "-" & cdbl(nIndex))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalFan']/NodeCommStr$", Encode(CommStr))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalFan']/FanNumber$", cdbl(nIndex))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.Nodes']/Name$", "Cluster")
'call oInst.AddProperty("$MPElement[Name='System!System.Entity']/DisplayName$", "SNMP Host " & cstr(CommStr) & " - Bay " & nIndex & " - Serial Number " & HexToString(sDesc))
call oInst.AddProperty("$MPElement[Name='System!System.Entity']/DisplayName$", "SNMP Host " & cstr(CommStr) & " - " & HexToString(sDesc))
call oDiscoveryData.AddInstance(oInst)
'Test Section
'wscript.echo Base64Encode(CommStr)
'wscript.echo Base64Encoder(CommStr)
'wscript.Echo CommStr
'wscript.Echo nIndex
'Wscript.Echo HexToString(sDesc)
'wscript.echo cdbl(nIndex) & cstr(CommStr)
end if
Next
on error goto 0
End Sub
Function Decode(strB64)
strXML = "<B64DECODE xmlns:dt=" & Chr(34) & _
"urn:schemas-microsoft-com:datatypes" & Chr(34) & " " & _
"dt:dt=" & Chr(34) & "bin.base64" & Chr(34) & ">" & _
strB64 & "</B64DECODE>"
Set oXMLDoc = CreateObject("MSXML2.DOMDocument.3.0")
oXMLDoc.LoadXML(strXML)
decode = oXMLDoc.selectsinglenode("B64DECODE").nodeTypedValue
set oXMLDoc = nothing
End Function
Function Encode(Str)
'Use ADODB.Stream to write Ansi string to Unicode stream
Set objStream = CreateObject("ADODB.Stream")
objStream.Type = 2
objStream.Open
objStream.Charset = "unicode"
objStream.WriteText Str
objstream.Flush
'Read the stream back as a byte array
objStream.Position = 0
objStream.Type = 1
temp = objstream.read(2) 'read two bytes of the stream to discard the byte order mark
bArray = objStream.Read
objStream.Close
'Convert byte array to Base64
set objXML = createobject("MSXML2.DOMDocument.3.0")
Set objNode = objXML.createElement("b64")
objNode.dataType = "bin.base64"
objNode.nodeTypedValue = bArray
Encode = objNode.Text
Set Stream = Nothing
set objNode = nothing
set objXML = nothing
End Function
Function HexToString(str)
on error resume next
sOutput = ""
For x = 1 To len(str) Step 2
sChar = Chr(Clng("&h" & Mid(str,x,2)))
sOutput = sOutput & sChar
Next
if err.number = 0 then
HexToString = sOutput
Else
HexToString = str
end if
End Function
set oInst = nothing
set oDiscoveryData = nothing
set oArgs = nothing
set oAPI = nothing
set objWMILocator = nothing
set objWMIServices = nothing
set objWMINamedValueSet = nothing
]]>
</ScriptBody>
<TimeoutSeconds>120</TimeoutSeconds>
</ProbeAction>
</MemberModules>
<Composition>
<Node ID="ScriptDiscovery">
<Node ID="Scheduler" />
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>System!System.Discovery.Data</OutputType>
</DataSourceModuleType>
</ModuleTypes>
<MonitorTypes>
<UnitMonitorType ID="IsilonSNMP.MonitorType.PhysicalDiskStatus" Accessibility="Internal">
<MonitorTypeStates>
<MonitorTypeState ID="PhysicalDiskOK" NoDetection="false" />
<MonitorTypeState ID="PhysicalDiskNotOK" NoDetection="false" />
</MonitorTypeStates>
<Configuration>
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="OID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="NodeCommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<MonitorImplementation>
<MemberModules>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.BasicSNMPProbe">
<Interval>$Config/Interval$</Interval>
<IPAddress>$Config/IPAddress$</IPAddress>
<CommStr>$Config/NodeCommStr$</CommStr>
<OID>$Config/OID$</OID>
</DataSource>
<ConditionDetection ID="CDPhysicalDiskOK" TypeID="System!System.ExpressionFilter">
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>HEALTHY</Pattern>
</RegExExpression>
</Expression>
</ConditionDetection>
<ConditionDetection ID="CDPhysicalDiskNotOK" TypeID="System!System.ExpressionFilter">
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>DoesNotContainSubstring</Operator>
<Pattern>HEALTHY</Pattern>
</RegExExpression>
</Expression>
</ConditionDetection>
</MemberModules>
<RegularDetections>
<RegularDetection MonitorTypeStateID="PhysicalDiskOK">
<Node ID="CDPhysicalDiskOK">
<Node ID="DS1" />
</Node>
</RegularDetection>
<RegularDetection MonitorTypeStateID="PhysicalDiskNotOK">
<Node ID="CDPhysicalDiskNotOK">
<Node ID="DS1" />
</Node>
</RegularDetection>
</RegularDetections>
</MonitorImplementation>
</UnitMonitorType>
<UnitMonitorType ID="IsilonSNMP.MonitorType.PhysicalFanStatus" Accessibility="Internal">
<MonitorTypeStates>
<MonitorTypeState ID="PhysicalFanOK" NoDetection="false" />
<MonitorTypeState ID="PhysicalFanWarn" NoDetection="false" />
<MonitorTypeState ID="PhysicalFanCritical" NoDetection="false" />
</MonitorTypeStates>
<Configuration>
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="OID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="NodeCommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="FanSpeedHighCritical" type="xsd:integer" />
<xsd:element minOccurs="1" name="FanSpeedLowWarn" type="xsd:integer" />
<xsd:element minOccurs="1" name="FanSpeedLowCritical" type="xsd:integer" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedHighCritical" Selector="$Config/FanSpeedHighCritical$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedLowWarn" Selector="$Config/FanSpeedLowWarn$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedLowCritical" Selector="$Config/FanSpeedLowCritical$" ParameterType="int" />
</OverrideableParameters>
<MonitorImplementation>
<MemberModules>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.BasicSNMPProbe">
<Interval>$Config/Interval$</Interval>
<IPAddress>$Config/IPAddress$</IPAddress>
<CommStr>$Config/NodeCommStr$</CommStr>
<OID>$Config/OID$</OID>
</DataSource>
<ConditionDetection ID="CDPhysicalFanOK" TypeID="System!System.ExpressionFilter">
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>Less</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedHighCritical$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>Greater</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedLowWarn$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</ConditionDetection>
<ConditionDetection ID="CDPhysicalFanWarn" TypeID="System!System.ExpressionFilter">
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>LessEqual</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedLowWarn$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>Greater</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedLowWarn$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</ConditionDetection>
<ConditionDetection ID="CDPhysicalFanCritical" TypeID="System!System.ExpressionFilter">
<Expression>
<Or>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>GreaterEqual</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedHighCritical$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>LessEqual</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedLowCritical$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</Or>
</Expression>
</ConditionDetection>
</MemberModules>
<RegularDetections>
<RegularDetection MonitorTypeStateID="PhysicalFanOK">
<Node ID="CDPhysicalFanOK">
<Node ID="DS1" />
</Node>
</RegularDetection>
<RegularDetection MonitorTypeStateID="PhysicalFanWarn">
<Node ID="CDPhysicalFanWarn">
<Node ID="DS1" />
</Node>
</RegularDetection>
<RegularDetection MonitorTypeStateID="PhysicalFanCritical">
<Node ID="CDPhysicalFanCritical">
<Node ID="DS1" />
</Node>
</RegularDetection>
</RegularDetections>
</MonitorImplementation>
</UnitMonitorType>
</MonitorTypes>
</TypeDefinitions>
<Monitoring>
<Discoveries>
<Discovery ID="IsilonSNMP.Discovery.Cluster" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="IsilonSNMP.Class.IsilonCluster.Nodes" />
<DiscoveryRelationship TypeID="IsilonSNMP.Relationship.ClusterHostsNodes" />
</DiscoveryTypes>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.DiscoverContainmentClasses">
<IPAddress>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<ClassID>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.Nodes"]$</ClassID>
<InstanceSettings>
<Settings>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</Name>
<Value>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
<Value>Cluster</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.Nodes"]/Name$</Name>
<Value>Cluster</Value>
</Setting>
</Settings>
</InstanceSettings>
</DataSource>
</Discovery>
<Discovery ID="IsilonSNMP.Discovery.IsilonCluster" Enabled="true" Target="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="IsilonSNMP.Class.IsilonCluster" />
</DiscoveryTypes>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.DiscoverCluster">
<Interval>600</Interval>
<IP>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IP>
<CommunityString>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</CommunityString>
<SystemOID>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemOID$</SystemOID>
</DataSource>
</Discovery>
<Discovery ID="IsilonSNMP.Discovery.IsilonClustersGroup" Enabled="true" Target="IsilonSNMP.Group.IsilonClusters" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryRelationship TypeID="IsilonSNMP.Relationship.IsilonClustersGroupContainsIsilonClusters" />
</DiscoveryTypes>
<DataSource ID="GP1" TypeID="SC!Microsoft.SystemCenter.GroupPopulator">
<RuleId>$MPElement$</RuleId>
<GroupInstanceId>$MPElement[Name="IsilonSNMP.Group.IsilonClusters"]$</GroupInstanceId>
<MembershipRules>
<MembershipRule>
<MonitoringClass>$MPElement[Name="IsilonSNMP.Class.IsilonCluster"]$</MonitoringClass>
<RelationshipClass>$MPElement[Name="IsilonSNMP.Relationship.IsilonClustersGroupContainsIsilonClusters"]$</RelationshipClass>
<Expression>
<RegExExpression>
<ValueExpression>
<Property>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</Property>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>.</Pattern>
</RegExExpression>
</Expression>
</MembershipRule>
</MembershipRules>
</DataSource>
</Discovery>
<Discovery ID="IsilonSNMP.Discovery.PhysicalDisk" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.Nodes" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="IsilonSNMP.Class.IsilonCluster.PhysicalDisk" />
<DiscoveryRelationship TypeID="IsilonSNMP.Relationship.NodesHostsPhysicalDisk" />
</DiscoveryTypes>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.DiscoverPhysicalDisk">
<IPAddress>$Target/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<CommStr>$Target/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</CommStr>
<Interval>7800</Interval>
<ConfiguredNodes>$Target/Host/Property[Type="IsilonSNMP.Class.IsilonCluster"]/ConfiguredNodes$</ConfiguredNodes>
<BayIndex>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.PhysicalDisk"]/BayIndex$</BayIndex>
<NodeCommStr>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.PhysicalDisk"]/NodeCommStr$</NodeCommStr>
</DataSource>
</Discovery>
<Discovery ID="IsilonSNMP.Discovery.PhysicalFan" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.Nodes" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="IsilonSNMP.Class.IsilonCluster.PhysicalFan" />
<DiscoveryRelationship TypeID="IsilonSNMP.Relationship.NodesHostsPhysicalFan" />
</DiscoveryTypes>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.DiscoverPhysicalFan">
<IPAddress>$Target/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<CommStr>$Target/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</CommStr>
<Interval>8000</Interval>
<ConfiguredNodes>$Target/Host/Property[Type="IsilonSNMP.Class.IsilonCluster"]/ConfiguredNodes$</ConfiguredNodes>
<FanNumber>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.PhysicalFan"]/FanNumber$</FanNumber>
<NodeCommStr>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.PhysicalFan"]/NodeCommStr$</NodeCommStr>
<FanSpeedHighCritical>14500</FanSpeedHighCritical>
<FanSpeedLowWarn>3400</FanSpeedLowWarn>
<FanSpeedLowCritical>3000</FanSpeedLowCritical>
</DataSource>
</Discovery>
</Discoveries>
<Monitors>
<UnitMonitor ID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70" Accessibility="Public" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="Snmp!System.SnmpTrapProvider.2SingleEvent2StateMonitorType" ConfirmDelivery="false">
<Category>Custom</Category>
<AlertSettings AlertMessage="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70_AlertMessageResourceID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
</AlertSettings>
<OperationalStates>
<OperationalState ID="UIGeneratedOpStateId843498792d7d4fbf80d83f3939255dd9" MonitorTypeStateID="SecondEventRaised" HealthState="Success" />
<OperationalState ID="UIGeneratedOpStateId9fd776cd21a747c5994738e863b31fb9" MonitorTypeStateID="FirstEventRaised" HealthState="Warning" />
</OperationalStates>
<Configuration>
<FirstIP>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</FirstIP>
<FirstCommunityString>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</FirstCommunityString>
<FirstAllTraps>false</FirstAllTraps>
<FirstVersion>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/Version$</FirstVersion>
<FirstOIDProps>
<OIDProp>.1.3.6.1.4.1.12124.1.1.2.0</OIDProp>
</FirstOIDProps>
<FirstExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">1</Value>
</ValueExpression>
</SimpleExpression>
</FirstExpression>
<SecondIP>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</SecondIP>
<SecondCommunityString>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</SecondCommunityString>
<SecondAllTraps>false</SecondAllTraps>
<SecondVersion>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/Version$</SecondVersion>
<SecondOIDProps>
<OIDProp>.1.3.6.1.4.1.12124.1.1.2.0</OIDProp>
</SecondOIDProps>
<SecondExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">1</Value>
</ValueExpression>
</SimpleExpression>
</SecondExpression>
</Configuration>
</UnitMonitor>
<UnitMonitor ID="IsilonSNMP.Monitor.PhysicalDiskStatus" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.PhysicalDisk" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="IsilonSNMP.MonitorType.PhysicalDiskStatus" ConfirmDelivery="true">
<Category>AvailabilityHealth</Category>
<AlertSettings AlertMessage="IsilonSNMP.Monitor.PhysicalDiskStatus_AlertMessageResourceID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Property[Type="System!System.Entity"]/DisplayName$</AlertParameter1>
<AlertParameter2>$Data/Context/SnmpVarBinds/SnmpVarBind[1]/Value$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="IsilonSNMP.Monitor.PhysicalDiskStatus_PhysicalDiskOK" MonitorTypeStateID="PhysicalDiskOK" HealthState="Success" />
<OperationalState ID="IsilonSNMP.Monitor.PhysicalDiskStatus_PhysicalDiskNotOK" MonitorTypeStateID="PhysicalDiskNotOK" HealthState="Warning" />
</OperationalStates>
<Configuration>
<Interval>120</Interval>
<IPAddress>$Target/Host/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<OID>.1.3.6.1.4.1.12124.2.52.1.5.$Target/Property[Type="IsilonSNMP.Class.IsilonCluster.PhysicalDisk"]/BayIndex$</OID>
<NodeCommStr>$Target/Property[Type="IsilonSNMP.Class.IsilonCluster.PhysicalDisk"]/NodeCommStr$</NodeCommStr>
</Configuration>
</UnitMonitor>
<UnitMonitor ID="IsilonSNMP.Monitor.PhysicalFanStatus" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.PhysicalFan" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="IsilonSNMP.MonitorType.PhysicalFanStatus" ConfirmDelivery="true">
<Category>AvailabilityHealth</Category>
<AlertSettings AlertMessage="IsilonSNMP.Monitor.PhysicalFanStatus_AlertMessageResourceID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Property[Type="System!System.Entity"]/DisplayName$</AlertParameter1>
<AlertParameter2>$Data/Context/SnmpVarBinds/SnmpVarBind[1]/Value$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanOK" MonitorTypeStateID="PhysicalFanOK" HealthState="Success" />
<OperationalState ID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanWarn" MonitorTypeStateID="PhysicalFanWarn" HealthState="Warning" />
<OperationalState ID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanCritical" MonitorTypeStateID="PhysicalFanCritical" HealthState="Error" />
</OperationalStates>
<Configuration>
<Interval>120</Interval>
<IPAddress>$Target/Host/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<OID>.1.3.6.1.4.1.12124.2.53.1.4.$Target/Property[Type="IsilonSNMP.Class.IsilonCluster.PhysicalFan"]/FanNumber$</OID>
<NodeCommStr>$Target/Property[Type="IsilonSNMP.Class.IsilonCluster.PhysicalFan"]/NodeCommStr$</NodeCommStr>
<FanSpeedHighCritical>14500</FanSpeedHighCritical>
<FanSpeedLowWarn>3400</FanSpeedLowWarn>
<FanSpeedLowCritical>3000</FanSpeedLowCritical>
</Configuration>
</UnitMonitor>
<DependencyMonitor ID="IsilonSNMP.Monitor.ClusterPhysicalDiskAvailabilityDependency" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.Nodes" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" RelationshipType="IsilonSNMP.Relationship.NodesHostsPhysicalDisk" MemberMonitor="IsilonSNMP.Monitor.PhysicalDiskStatus">
<Category>AvailabilityHealth</Category>
<Algorithm>WorstOf</Algorithm>
<MemberUnAvailable>Error</MemberUnAvailable>
</DependencyMonitor>
<DependencyMonitor ID="IsilonSNMP.Monitor.ClusterPhysicalFanAvailabilityDependency" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.Nodes" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" RelationshipType="IsilonSNMP.Relationship.NodesHostsPhysicalFan" MemberMonitor="IsilonSNMP.Monitor.PhysicalFanStatus">
<Category>AvailabilityHealth</Category>
<Algorithm>WorstOf</Algorithm>
<MemberUnAvailable>Error</MemberUnAvailable>
</DependencyMonitor>
<DependencyMonitor ID="IsilonSNMP.Monitor.ClusterClusterAvailabilityDependency" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" RelationshipType="IsilonSNMP.Relationship.ClusterHostsNodes" MemberMonitor="Health!System.Health.AvailabilityState">
<Category>AvailabilityHealth</Category>
<Algorithm>WorstOf</Algorithm>
<MemberUnAvailable>Error</MemberUnAvailable>
</DependencyMonitor>
</Monitors>
</Monitoring>
<Presentation>
<StringResources>
<StringResource ID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70_AlertMessageResourceID" />
<StringResource ID="AlertMessageIDb1a3848769824949889fcc4c159cf462" />
<StringResource ID="IsilonSNMP.Monitor.PhysicalDiskStatus_AlertMessageResourceID" />
<StringResource ID="IsilonSNMP.Monitor.PhysicalFanStatus_AlertMessageResourceID" />
</StringResources>
</Presentation>
<LanguagePacks>
<LanguagePack ID="ENU" IsDefault="true">
<DisplayStrings>
<DisplayString ElementID="IsilonSNMP">
<Name>Isilon SNMP MP</Name>
<Description>Management pack to discover a Isilon cluster running OneFS 5.5</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster">
<Name>Isilon Cluster</Name>
<Description>Isilon SNMP Device</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster" SubElementID="Hostname">
<Name>Hostname</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster" SubElementID="ConfiguredNodes">
<Name>ConfiguredNodes</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.Nodes" SubElementID="Name">
<Name>Name</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.Nodes">
<Name>Isilon Cluster Hosts Nodes</Name>
<Description>Containment class for the Isilon cluster with components such as hard disks, fans, power supplies, etc.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Relationship.ClusterHostsNodes">
<Name>Isilon Cluster Hosts Nodes</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.IsilonCluster">
<Name>Discover Isilon Cluster</Name>
<Description>Discovery of the Isilon Cluster using OID strings from RFC1213.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.DataSource.BasicSNMPProbe">
<Name>Isilon Basic Probe Data Source</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.DataSource.DiscoverCluster">
<Name>Discover Isilon Cluster</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Relationship.IsilonClustersGroupContainsIsilonClusters">
<Name>Isilon Devices Group Contains Isilon Cluster</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.Cluster">
<Name>Discover Isilon Cluster Containment Class</Name>
<Description>Discovers the Cluster containment class, which hosts managed objects such as fans</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.IsilonClustersGroup">
<Name>Isilon Deivce Group Populator</Name>
</DisplayString>
<DisplayString ElementID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70">
<Name>PlaceHolder</Name>
<Description>Place Holder to detect isilon cluster</Description>
</DisplayString>
<DisplayString ElementID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70" SubElementID="UIGeneratedOpStateId843498792d7d4fbf80d83f3939255dd9">
<Name>Second Event Raised</Name>
</DisplayString>
<DisplayString ElementID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70" SubElementID="UIGeneratedOpStateId9fd776cd21a747c5994738e863b31fb9">
<Name>First Event Raised</Name>
</DisplayString>
<DisplayString ElementID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70_AlertMessageResourceID">
<Name>PlaceHolder</Name>
<Description>placeholder alert to detect isilon</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalDiskStatus">
<Name>Isilon PhysicalDisk Status Monitor</Name>
<Description>Monitor that generates an alert when the PhysicalDisk status is not ok.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalDiskStatus" SubElementID="IsilonSNMP.Monitor.PhysicalDiskStatus_PhysicalDiskOK">
<Name>PhysicalDiskOK</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalDiskStatus" SubElementID="IsilonSNMP.Monitor.PhysicalDiskStatus_PhysicalDiskNotOK">
<Name>PhysicalDiskOK</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalDiskStatus_AlertMessageResourceID">
<Name>Isilon PhysicalDisk Status</Name>
<Description>The Disk ({0}) is in a warning or error state. The Disk state is: {1}.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.PhysicalDisk">
<Name>Isilon Disk</Name>
<Description>Disk</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.PhysicalDisk" SubElementID="Index">
<Name>Index</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Relationship.NodesHostsPhysicalDisk">
<Name>Isilon Cluster Hosts PhysicalDisk</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.PhysicalDisk">
<Name>Discover Isilon Cluster Physical Disks</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.DataSource.DiscoverPhysicalDisk">
<Name>Discover Isilon Cluster PhysicalDisk</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.ClusterPhysicalDiskAvailabilityDependency">
<Name>Isilon Disk</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus">
<Name>Isilon PhysicalFan Status Monitor</Name>
<Description>Monitor that generates an alert when the PhysicalFan speed is not within a premited range.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus" SubElementID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanOK">
<Name>PhysicalFanOK</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus" SubElementID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanWarn">
<Name>PhysicalFanWarn</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus" SubElementID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanCritical">
<Name>PhysicalFanCritical</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus_AlertMessageResourceID">
<Name>Isilon PhysicalFan Status</Name>
<Description>The Fan ({0}) is in a warning or error state. Current Fan speed is: {1}.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.PhysicalFan">
<Name>Isilon Fan</Name>
<Description>Fan</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.PhysicalFan" SubElementID="Index">
<Name>Index</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Relationship.NodesHostsPhysicalFan">
<Name>Isilon Cluster Hosts PhysicalFan</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.PhysicalFan">
<Name>Discover Isilon Cluster Physical Fans</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.DataSource.DiscoverPhysicalFan">
<Name>Discover Isilon Cluster PhysicalFan</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.ClusterPhysicalFanAvailabilityDependency">
<Name>Isilon Fan</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.ClusterClusterAvailabilityDependency">
<Name>Cluster</Name>
</DisplayString>
</DisplayStrings>
</LanguagePack>
</LanguagePacks> -
Homework help--almost done but don't know how my class and main work?
hello, i'm doing a project for my intro to java class. i'm almost done but i'm very confused on making my main and class work. the counter for my class slotMachine keeps resetting after 2 increments. also i don't not know how to make my quarters in the main receive a pay out from my class. Please guide me to understand what i have to do to solve this problem...I have listed my question page and my class and main of what i have done so far. Thank you .I will really appreciate the help.
Objective: Create a class in Java, make instances of that class. Call methods that solve a particular problem Consider the difference between procedural and object-oriented programming for the same problem.
Program Purpose:
Find out how long it will take Martha to lose all of her money playing 3 instances of the slot machine class.
Specification: Martha in Vegas
Martha takes a jar of quarters to the casino with the intention of becoming rich. She plays three machines in turn. Unknown to her, the machines are entirely predictable. Each play costs one quarter. The first machine pays 30 quarters every 35th time it is played; the second machine pays 60 quarters every 100th time it is played; the third pays 11 quarters every 10th time it is played. (If she played the 3rd machine only she would be a winner.)
Your program should take as input the number of quarters in Martha's jar (there will be at least one and fewer than 1000), and the number of times each machine has been played since it last paid.
Your program should output the number of times Martha plays until she goes broke.
Sample Session. User input is in italics
How many quarters does Martha have in the jar?
48
How many times has the first machine been played since playing out?
30
How many times has the second machine been played since paying out?
10
How many times has the third machine been played since paying out?
9
Martha plays XXX times
Specific requirements: You must solve this using an object-oriented approach. Create a class called SlotMachine. Think about: What does a SlotMachine Have? What does it do? What information does it maintain? This is the state and behavior of the object. Each instance of this class will represent a single slot machine. Don�t put anything in the class unless it �belongs� to a single machine.
In the main method, create 3 instances of the slot machine to solve the problem in the spec. Play the machines in a loop.
========================================================================
my class
========================================================================
public class SlotMachine{
private int payOut;
private int playLimit;
private int counter;
public SlotMachine (int payOut, int playLimit){
this.payOut = payOut;
this.playLimit = playLimit;
public void setPayOut (int payOut){
this.payOut = payOut;
public int getPayOut(){
return payOut;
public void setPlayLimit (int playLimit){
this.playLimit = playLimit;
public int getPlayLimit(){
return playLimit;
public void slotCounter(){
counter = SavitchIn.readLineInt();
public int game(){
counter++;
if (counter == playLimit){
counter = 0;
return payOut - 1;
return -1; // the game method was edited by my professor but i'm still confused to make it work
=======================================================================
my main
=======================================================================
public class Gametesting{
public static void main(String[]args){
SlotMachine firstSlotMachine = new SlotMachine (2,3);
SlotMachine secondSlotMachine = new SlotMachine (2,3);
SlotMachine thirdSlotMachine = new SlotMachine (2,2);
int quarters;
int playerCount = 0;
System.out.println("How many quarters does Martha have in the jar?");
quarters = SavitchIn.readLineInt();
System.out.println("How many times has the first machine been played since paying out?");
firstSlotMachine.slotCounter();
System.out.println("How many times has the second machine been played since paying out?");
secondSlotMachine.slotCounter();
System.out.println("How many times has the third machine been played since paying out?");
thirdSlotMachine.slotCounter();
while (quarters != 0){
playerCount++;
quarters--;
firstSlotMachine.game();
if (quarters != 0){
playerCount++;
quarters--;
secondSlotMachine.game();
if (quarters != 0){
playerCount++;
quarters--;
thirdSlotMachine.game();
System.out.println("Martha plays " + playerCount + " times");The main problem is that you made the first and second slot machine to pay out 2 quarters after 3 games and the third machine pay out two quarters after two games. That is not what your assignment specified.
SlotMachine firstSlotMachine = new SlotMachine (2,3);
SlotMachine secondSlotMachine = new SlotMachine (2,3);
SlotMachine thirdSlotMachine = new SlotMachine (2,2);
The second problem is that you never add the payout of a machine to Martha's number of quarters.
Look carefully at the way your professor implemented the game() method. If you think about it, what it returns is the net "gain" from playing a game. On jackpot it returns payOut -1 (jackpot less the one quarter Martha had to pay for the game), otherwise it returns -1 (Martha spends one quarter and wins nothing).
So what you can do is simply add the returned value to the number of quarters in the jar -
quarters = <machine>.game();
instead of quarters--. -
SOA Composites in Parallel - How to Configure and Monitor
We have couple of SOA Composites that customers are making calls to. How can I configure these composites / Web Service that can be handled parallely.
Customer is calling each composite 10/20 times (because of the load) in every 10 seconds and based on their testing it is queuing up and performance is slow. But when I look at CUBE_INSTANCE table for start and end of composite instances, it is doing good.. with in 1 second.
I am guessing I need to configure to handle parallel calls to these SOA Composites.
Any clue or helpHi,
It depends on what you have in that composite? For BPEL you should go through this...
http://docs.oracle.com/cd/E23943_01/core.1111/e10108/bpel.htm#BABGBFII
The master document is this...
http://docs.oracle.com/cd/E23943_01/core.1111/e10108/part_soa.htm#ASPER99595
Cheers,
Vlad -
What are condition variables? how do condition variables and monitors work?
What are condition variables? how do condition variables and monitors work? Isn't condition variables the same as semaphore? After reading their implementaion over and over again..I still don't know how condition variables and monitors work together to provide good synchroniztion.
ThanksI can tell you they have nothing to do with Serialization.
Are you refering to the Condition class in Java 5+
Usually you would use either a Condition or use synchronization, so you shouldn't need to use them together. -
Duplicate method at internal Class
Hi All:
I was working in my Web Dynpro when I got these errors in the build:
The method wdCreateUITreeForTransparentContainer() is undefined for the type InternalCreatePolitics InternalCreatePolitics.java NWD_agiletrk_Dpmg_hr_politicswebdynpro~agile.com/gen_wdp/packages/com/agile/pmg/politics/comp/wdp line 279
Duplicate method wdCreateUITreeForTransparentContainer in type InternalCreatePolitics InternalCreatePolitics.java NWD_agiletrk_Dpmg_hr_politicswebdynpro~agile.com/gen_wdp/packages/com/agile/pmg/politics/comp/wdp line 304
These is from a class that the Developer Studio autogenerate. I don´t know how to solve it.
ThanksLooks like something went wrong with the code generation. I has happened to me sometimes too, mainly because sometimes it allowed me to create two ui elements with the same name (ussually transparent containers as your case) and later I got the error in the internal class.
Check if you have done something wrong with your ui elements (two of them with the same name, a transparent container in which an invalid parent like a toolbar...) and fix it. If everything is ok with you ui elements but you still get the error then just modify the internal class and remove the method that is giving you the error. -
Class override, how to create the child class and then the base class
I started to write a program for a smart DMM, the problem is every version of the DMM the company change the communication commend.
My idea is to write a child class for every DMM version and every SubVI of the child will override the base class SubVI.
My problem is, i want first to create one child class and after i will see every thing is work, start to create the base class. that way i will see if am thinking the right way.
My question is
How can i create a child class and then create the base class and configure the SubVi of the child class to be Override of the base class?
I tried to search in the property of the class but i didn't see nothing.
Thanks
Solved!
Go to Solution.This can be done and I've done it on occasion.
You simply create the base class with the dynamic dispatch methods you require (connector panes need to be identical to thos of the child class).
Then set the inheritance of the class to inherit from this base class. If your method is defined as a dynamic dispatch method in the parent, you'll most likely now have some errors (unless your child method was already DD in which case you might just be OK already).
To change the inheritance of a class, right-click the properties of the class in your project and select properties. I believe the ineritance tree is at the lower end of the properties. Click on the "change inheritance" (or something similar) to choose the class from which you now wish to inherit.
Say hello to my little friend.
RFC 2323 FHE-Compliant -
Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev KumarDuplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
General class and setting properties vs specific inner class
This is a general question for discussion. I am curious to know how people differentiate between instantiating a standard class and making property adjustments within a method versus defining a new inner class with the property adjustments defined within.
For example, when laying out a screen do you:
- instantiate all the objects, set properties, and define the layout all within a method
- create an inner class that defines the details of the layout (may reference other inner classes if complex) that is then just instantiated within a method
- use some combination of the two depending on size and complexity.
- use some other strategy
Obviously, by breaking the work up into smaller classes you are simplifying the structure since each class is taking on less responsibility, as well as hiding the details of the implementaion from higher level classes. On the other hand, if you are just instantiating an object and making some SET calls is creating an inner class overkill.
Is there a general consensus for an approach? I am curious to hear the approach of others.it's depends on your design..
usually, if the application is simple and is not expected to be maintain (update..etc..) than I just have all the building of the gui within the same class (usually..the main class that extends JFrame).
if the application follows the MVC pattern, than I would have a seperate class that build the GUI for a particular View. I would create another class to handle the ActionEvent, and other event (Controller)
I rarely use inner class...and only use them to implements the Listerner interface (but only for simple application).. -
Bringing Windows Computer class and ComputerNetworkAdapter class properties together
A few people have asked or been faced with the fact that the IP and MAC address within the Windows Computer Form (Class) does not get populated, unless you have SCOM connector providing this data. So the question to ask is if you can use Type Projections
(Combination Classes) to Extend the Windows.Computer Class and display additional properties in the Extension Tab that retrieve the IP and MAC addresses from the Computer.NetworkAdapter Class (which is populated from the SCCM Connector. It seems like such
as simple thing to ask for, as not everyone uses SCOM to gather data from the Client machines to fill in the default "blanks", and it seems that more than a few analysts would be served well by having this data appear on the Windows Form when checking
a Machine asset. Anyone have a possible answer, other than use Reporting to nail this one?This sounds like something that could be resolved using an Orchestrator runbook. You could create the runbook to query the computer objects, get the related network adapters, then update the computer IP address field.
Matthew Dowst |
Blog | Twitter -
How to compile and register a Java CFX tag with multiple class files?
All-
If this is the wrong forum for CFX questions, please let me
know.
I need to determine how to compile and register a Java CFX
tag that contains multiple class files. One class file implements
the CustomTag interface and the other class files implement various
supporting classes. All of the documentation that I have found
talks about using a single class file. I am assuming that a JAR
file will be involved, but I am not sure of the specifics.
Thanks in advance for your help.
-JoshYes, it will involve a jar. Use your java IDE (eclipse,
etcetera ..) to create a jar containing all of the classes. Check
your ide's documentation for how to create jar files. After you
have created the jar, place the jar in the CF class path so CF will
recognize it. For example the {cf_root}/WEB-INF/lib directory. CF
must be restarted before it will detect the new jar. After
restarting CF, register the CFX tag in the ColdFusion Administrator
using the name of the class that implements the CustomTag
interface.
Though it is worth noting you can also instantiate java
classes directly from ColdFusion (ie without using a CFX
tag). -
How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!
Vera,
Use View > View Options, and set 'Sort By" to "Manual Order."
Then you will be able to drag-n-drop songs up and down the list. -
We are getting multiple 8623 Errors in SQL Log while running Vendor's software.
How can you catch which Query causes the error?
I tried to catch it using SQL Profiler Trace but it doesn't show which Query/Sp is the one causing an error.
I also tried to use Extended Event session to catch it, but it doesn't create any output either.
Error:
The query processor ran out of internal resources and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that
reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer Support Services for more information.
Extended Event Session that I used;
CREATE EVENT SESSION
overly_complex_queries
ON SERVER
ADD EVENT sqlserver.error_reported
ACTION (sqlserver.sql_text, sqlserver.tsql_stack, sqlserver.database_id, sqlserver.username)
WHERE ([severity] = 16
AND [error_number] = 8623)
ADD TARGET package0.asynchronous_file_target
(SET filename = 'E:\SQLServer2012\MSSQL11.MSSQLSERVER\MSSQL\Log\XE\overly_complex_queries.xel' ,
metadatafile = 'E:\SQLServer2012\MSSQL11.MSSQLSERVER\MSSQL\Log\XE\overly_complex_queries.xem',
max_file_size = 10,
max_rollover_files = 5)
WITH (MAX_DISPATCH_LATENCY = 5SECONDS)
GO
-- Start the session
ALTER EVENT SESSION overly_complex_queries
ON SERVER STATE = START
GO
It creates only .xel file, but not .xem
Any help/advice is greatly appreciatedHi VK_DBA,
According to your error message, about which query statement may fail with error message 8623, as other post, you can use trace flag 4102 & 4118 for overcoming this error. Another way is looking for queries with very long IN lists, a large number of
UNIONs, or a large number of nested sub-queries. These are the most common causes of this particular error message.
The error 8623 occurs when attempting to select records through a query with a large number of entries in the "IN" clause (> 10,000). For avoiding this error, I suggest that you could apply the latest Cumulative Updates media for SQL Server 2012 Service
Pack 1, then simplify the query. You may try divide and conquer approach to get part of the query working (as temp table) and then add extra joins / conditions. Or You could try to run the query using the hint option (force order), option (hash join), option
(merge join) with a plan guide.
For more information about error 8623, you can review the following article.
http://blogs.technet.com/b/mdegre/archive/2012/03/13/8623-the-query-processor-ran-out-of-internal-resources-and-could-not-produce-a-query-plan.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
How to get internal order and activity type other than from BSEG
We want the Internal order and activity type fields. From BSEG, it is taking a long time, and it hangs.
Is there any other table we can get these values from?
Our query is this:
select bukrs "Company code
gjahr "Fiscal year
belnr "Document no.
buzei "Document Item no.
aufnr "Internal order
lstar "Activity type
from bseg
into table gt_add_info
for all entries in gt_gl_detail
where bukrs = gt_gl_detail-rbukrs"Comcode from G/L acct detail
and buzei = gt_gl_detail-buzei "Doc item no. from G/L acct detail
and belnr = gt_gl_detail-belnr "Doc no. G/L acct detail
and gjahr = gt_gl_detail-gjahr."Fiscal yea
Can advise please how to make it faster. My internal table (GT_GL_DETAIL) has over 100000 records. ? thanks.I did a SQL trace, and saw that tables CSLA, CSSL, COKL and COKA are being hit with the values I entered inthe Activity type in transaction FB50.
Still not clear but where it gets stored. If in any of these tables, how do I get the object key? -
How we can use class and methods for the FM of reuse_alv_list_display
Hi Abapers,
Please provide the sample code of class and method of REUSE_ALV_LIST_DISPLAY.
Which Class i can use for this Function module.
I need to write a code using OOPS concept.
I was done the GRID display using this class cl_gui_alv_grid.
But i want only List Display using the class & methods.
Plz provide sample code.
Thanks
Nani.Hi Nani,
This is the sample code..
*& Report Z_OO_ALV
*& We can Use Two containers in OOALV
REPORT z_oo_alv LINE-COUNT 50.
*types gt_struct type sflight.
DATA BEGIN OF gt_struct.
INCLUDE STRUCTURE sflight.
DATA rcol(4) TYPE c.
DATA colors TYPE lvc_t_scol.
DATA END OF gt_struct.
*ALV GRIDs
DATA gr_alvgrid TYPE REF TO cl_gui_alv_grid.
DATA gr_alvgrid1 TYPE REF TO cl_gui_alv_grid.
DATA gc_custom_control_name TYPE scrfname VALUE 'CC_ALV'.
DATA gc_custom_control_name1 TYPE scrfname VALUE 'CC_ALV1'.
*CONTAINERs
DATA gr_ccontainer TYPE REF TO cl_gui_custom_container.
DATA gr_ccontainer1 TYPE REF TO cl_gui_custom_container.
*FIELDCATALOGs
DATA gt_fieldcat TYPE lvc_t_fcat WITH HEADER LINE.
DATA gt_fieldcat1 TYPE lvc_t_fcat WITH HEADER LINE.
*LAYOUTs
DATA gs_layout TYPE lvc_s_layo.
DATA gs_layout1 TYPE lvc_s_layo.
DATA pt_exclude TYPE ui_functions. "internal table declaration to be passed.
*DATA pt_cell TYPE lvc_t_cell with header line.
DATA : gt_list LIKE gt_struct OCCURS 50 WITH HEADER LINE,
gt_list1 LIKE gt_struct OCCURS 50 WITH HEADER LINE.
*DATA v_ucomm TYPE sy-ucomm.
CALL SCREEN 100.
*& Module display_alv OUTPUT
text
MODULE display_alv OUTPUT.
PERFORM display_alv.
ENDMODULE. " display_alv OUTPUT
*& Module PAI INPUT
text
MODULE pai INPUT.
CASE sy-ucomm.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN 'PICK'.
PERFORM cell_info.
ENDCASE.
ENDMODULE. " PAI INPUT
*& Form display_alv
text
FORM display_alv.
PERFORM prepare_field_catalog CHANGING gt_fieldcat[].
PERFORM prepare_layout CHANGING gs_layout.
PERFORM data_retrival.
IF gr_alvgrid IS INITIAL.
CREATE OBJECT gr_ccontainer
EXPORTING
container_name = gc_custom_control_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
ENDIF.
CREATE OBJECT gr_alvgrid
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = gr_ccontainer
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM exclude_tb_functions CHANGING pt_exclude.
PERFORM set_col.
CALL METHOD gr_alvgrid->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
it_toolbar_excluding = pt_exclude "excluding toolbar functions
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
it_outtab = gt_list[]
it_fieldcatalog = gt_fieldcat[]
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
CALL METHOD gr_alvgrid->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
PERFORM prepare_field_catalog1 CHANGING gt_fieldcat1[].
PERFORM prepare_layout1 CHANGING gs_layout1.
PERFORM data_retrival1.
IF gr_alvgrid1 IS INITIAL.
CREATE OBJECT gr_ccontainer1
EXPORTING
container_name = gc_custom_control_name1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
ENDIF.
CREATE OBJECT gr_alvgrid1
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = gr_ccontainer1
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM set_col1.
CALL METHOD gr_alvgrid1->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout1
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
it_outtab = gt_list1[]
it_fieldcatalog = gt_fieldcat1[]
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
CALL METHOD gr_alvgrid1->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. "display_alv
*& Form prepare_field_catalog
text
-->GT_FIELDCAT text
FORM prepare_field_catalog CHANGING pgt_fieldcat TYPE lvc_t_fcat.
DATA ls_fieldcat TYPE lvc_s_fcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-fieldname = 'CARRID'.
ls_fieldcat-scrtext_m = 'Air line code'.
ls_fieldcat-col_pos = 0.
ls_fieldcat-outputlen = 10.
ls_fieldcat-emphasize = 'C400'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO pgt_fieldcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'CONNID'.
ls_fieldcat-scrtext_m = 'Connection code'.
ls_fieldcat-emphasize = 'C900'.
APPEND ls_fieldcat TO pgt_fieldcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-fieldname = 'PRICE'.
ls_fieldcat-scrtext_m = 'PRICE'.
APPEND ls_fieldcat TO pgt_fieldcat.
ENDFORM. "prepare_field_catalog
*& Form prepare_layout
text
-->GS_LAYOUT text
FORM prepare_layout CHANGING gs_layout TYPE lvc_s_layo.
gs_layout-stylefname = 'FIELD_STYLE'.
gs_layout-zebra = 'X'.
gs_layout-grid_title = 'FLIGHT'.
gs_layout-sel_mode = 'A'.
gs_layout-ctab_fname = 'COLORS'.
ENDFORM. "prepare_layout
*& Form data_retrival
text
FORM data_retrival.
SELECT carrid
connid
price
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE gt_list
UP TO 50 ROWS.
ENDFORM. "data_retrival
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD gr_ccontainer->free.
CALL METHOD gr_ccontainer1->free.
LEAVE TO SCREEN 0.
ENDFORM. "exit_program
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STAT'.
SET TITLEBAR 'xxx'.
IF W_CUSTOM_CONTAINER IS INITIAL.
**sets TITLEBAR
PERFORM TITLEBAR.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form prepare_field_catalog1
text
-->GT_FIELDCAT text
FORM prepare_field_catalog1 CHANGING pgt_fieldcat1 TYPE lvc_t_fcat.
DATA ls_fieldcat TYPE lvc_s_fcat.
ls_fieldcat-tabname = 'gt_list1'.
ls_fieldcat-fieldname = 'SEATSMAX'.
ls_fieldcat-scrtext_m = 'MAX. SEATS'.
ls_fieldcat-col_pos = 0.
ls_fieldcat-outputlen = 10.
ls_fieldcat-emphasize = 'C400'.
ls_fieldcat-key = ' '.
APPEND ls_fieldcat TO pgt_fieldcat1.
ls_fieldcat-tabname = 'gt_list1'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'SEATSOCC'.
ls_fieldcat-scrtext_m = 'SEATS OCCUPIED'.
APPEND ls_fieldcat TO pgt_fieldcat1.
ENDFORM. "prepare_field_catalog
*& Form prepare_layout1
text
-->GS_LAYOUT text
FORM prepare_layout1 CHANGING gs_layout1 TYPE lvc_s_layo.
gs_layout1-stylefname = 'FIELD_STYLE'.
gs_layout1-zebra = 'X'.
gs_layout1-grid_title = 'DETAILS'.
gs_layout-sel_mode = 'C'.
gs_layout1-info_fname = 'RCOL'.
gs_layout-no_toolbar = 'X'.
ENDFORM. "prepare_layout
*& Form data_retrival1
text
FORM data_retrival1.
SELECT seatsmax
seatsocc
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE gt_list1
UP TO 50 ROWS.
ENDFORM. "data_retrival
*& Form exclude_tb_functions
&---- subroutine to exclude toolbar options -
text
-->PT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_maximum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_minimum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_subtot.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_sort.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_sum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_subtot.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_sum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_filter.
APPEND ls_exclude TO pt_exclude.
ENDFORM. "data_retrival1
*& Form cell_info
text
FORM cell_info. "CHANGING pt_cell TYPE lvc_t_cell.
DATA lt_cell TYPE lvc_t_cell WITH HEADER LINE.
CALL METHOD gr_alvgrid->get_selected_cells
IMPORTING
et_cell = lt_cell[].
LOOP AT lt_cell.
WRITE : lt_cell-col_id , lt_cell-row_id.
ENDLOOP.
MODIFY pt_cell[] from lt_cell[].
ENDFORM. "cell_info
*& Form set_col
text
FORM set_col .
DATA ls_cellcolor TYPE lvc_s_scol.
LOOP AT gt_list.
IF gt_list-price GT 500.
ls_cellcolor-fname = 'PRICE'.
ls_cellcolor-color-col = 5.
ls_cellcolor-color-int = 1.
ls_cellcolor-color-inv = 0.
APPEND ls_cellcolor TO gt_list-colors.
else.
ls_cellcolor-fname = 'PRICE'.
ls_cellcolor-color-col = 3.
ls_cellcolor-color-int = 1.
APPEND ls_cellcolor TO gt_list-colors.
ENDIF.
MODIFY gt_list.
ENDLOOP.
ENDFORM. "set_col
*& Form set_col1
text
FORM set_col1.
data : ind type sy-tabix,
indx type sy-tabix.
loop at gt_list1.
ind = sy-tabix / 2.
indx = sy-tabix - ind.
if indx eq ind.
gt_list1-rcol = 'C500'.
endif.
MODIFY gt_list1.
endloop.
ENDFORM. "set_col
*FORM TITLEBAR.
*SET TITLEBAR 'TITLE'.
*ENDFORM.
*double click on TITLE and write ur title
Thanks,
Samantak.
Rewards points for useful answers.
Maybe you are looking for
-
Can anyone please help me in finding out the meaning of the field values of second APDU What I try to say is how the value " C4 82 03 81" is calculated. I am able to figure out rest of the values of the upload command. cm> upload -b 250 "C:\....\app\
-
Null Pointer exception in accessing EJB in 9.0.3
Hi The application is working fine with 9.0.2, but when I deployed in 9.0.3 it is giving Null Pointer Exception, throwing the error message in Stack Trace. ========================================================== java.lang.NullPointerException
-
Incremental export/import replacement
Hi, Please help me with following task: a. A daily incremental export from a 9.2.0.3 database. b. Import into a 10.2.0.4 database. Since incremental exp/imp is no longer available for 9i and 10g, does Oracle have a replacement for this functionality?
-
Downloade and installed ACR v.6.6 for my Canon 70D and PSE 10. PSE 10 will not allow download of raw files. Pleae help!
-
hi we are trying to activate scenario business on behalf. we have made the correspondind settings in shopadmin and CRM, but when we try to log on to our Internet BOB shop we receive an error that the shop does not exists. We cannot find the BOB shop