Score issue - project won't follow repeat signs, how to work it around?

Hi everyone, did anyone work out this problem: how to repeat any region or bars without actually copy/paste them? See - problem is that if place a repeat sign in a score editor, based what I see - there is no way the sequencer would repeat those actual bars... I could repeat them one after another, copy paste, but that would be a different thing, since those would have a different bar numbers... just placing the repeat signs won't do anything... some ideas? Please help... Cubase has a quit sophisticated system, called track arrange, and even all the marks in a score editor sequencer follows.. (I'm surprised Logic lacks all that!) the only problem is - Cubases' score editor outlook suck. People, can someone make something that actually work in a year 2008 really well?? or we just play with a good reviews?? help. please!

vmudrak wrote:
there is no way the sequencer would repeat those actual bars...
Actually there is - you can probably do this the way Rohan suggests below or if you want a really thorough introduction to Logic Notation ( which will explain how to get the sequencer to follow the repeats etc) contact Johannes Prischl - http://prischl.net/
He is the original score guru working for Emagic and is a very helpful guy.
( I keep meaning to learn how to do this myself - get the sequencer to follow the repeats because then you could really hear how your arrangement sounds as it is written).

Similar Messages

  • SCORE: Repeat Signs

    According to Armaments Chapter 1 verse 83 in the most holy Logic 7 Manual, repeat signs are global symbols which once dragged to a bar will appear in every corner of the land ( ie in all other instruments).
    Are there any learned counsel out there who know of a case in which repeat signs may legally be used in a local part only?
    (As in Webern v. Schoenberg 1924)

    According to Armaments Chapter 1 verse 83 in the most
    holy Logic 7 Manual, repeat signs are global symbols
    which once dragged to a bar will appear in every
    corner of the land ( ie in all other instruments).
    Are there any learned counsel out there who know of a
    case in which repeat signs may legally be used in a
    local part only?
    (As in Webern v. Schoenberg 1924)
    I fear not sir.
    Logic's score is not well suited for serial music although it does well with cereal music.

  • If my macbook won't let me sign in on facetime what should i do?

    if my macbook won't let me sign in on facetime or messages what should i do?

    This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
    Step 1
    Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
    Step 2
    Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
    Step 3
    Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
    Step 4
    From the menu bar, select
               ▹ About This Mac
    Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
    Step 5
    Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
    Step 6
    From the menu bar, select
               ▹ System Preferences... ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
    The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
    Step 7
    Select from the menu bar
               ▹ System Preferences… ▹ Flash Player ▹ Storage
    and click
              Block all sites from storing information on this computer
    Close the preference pane.
    Step 8
    Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
    Step 9
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    If iMessage worked in the guest account, stop here and post your results.
    Step 10
    Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound outputand Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
    If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
    Step 11
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/com.apple.apsd.plist
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Step 12
    Reset the NVRAM.
    Step 13
    Reset the System Management Controller (SMC).
    Step 14
    Reinstall OS X.
    Step 15
    If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. When you set up a support call, select "Apple ID" as the product you need help with, not the hardware model. That way, if you're not under AppleCare, you may be able to talk your way out of being charged for the call.

  • Repeat signs acting goofy - help please

    Hi,
    Writing out Lead Sheets...
    The program is not allowing me to put in certain repeats in certain places - what's up with that?
    Any idea???
    Example:
    A few sections after each other get repeated... depending where I put the repeat sign - another repeat sign previous placed - magically dissapears!
    How do I override whatever Logic is doing?
    Thanks in advance!

    vmudrak wrote:
    there is no way the sequencer would repeat those actual bars...
    Actually there is - you can probably do this the way Rohan suggests below or if you want a really thorough introduction to Logic Notation ( which will explain how to get the sequencer to follow the repeats etc) contact Johannes Prischl - http://prischl.net/
    He is the original score guru working for Emagic and is a very helpful guy.
    ( I keep meaning to learn how to do this myself - get the sequencer to follow the repeats because then you could really hear how your arrangement sounds as it is written).

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • When i back up an iphone on itunes does it save my social network passwords and stuff so when i connect another phone and sync it it'll all be there and i won't have to sign into everything again?

    when i back up an iphone on itunes does it save my social network passwords and stuff so when i connect another phone and sync it it'll all be there and i won't have to sign into everything again? because, i don't know most of my passwords im just signed in to everything on my phone but i'm getting a new one.
    please help

    Hey menaelraghy,
    Thanks for the question. The following resource outlines what is backed up, you may be interested in this section:
    iTunes: About iOS backups
    http://support.apple.com/kb/HT4946
    - Keychain (includes email account passwords, Wi-Fi passwords, and passwords you enter into websites and some applications)
    If you encrypt the backup, you can transfer the keychain information to the new device. With an unencrypted backup, you can restore the keychain only to the same iOS device. If you're restoring to a new device with an unencrypted backup, you need to enter these passwords again.
    Thanks,
    Matt M.

  • Captivate (5) project won't open in Web Browser

    Hello,
    Since a few weeks I can't open my projects in the web browser. Accept one of the projects (only questionslides), i have been searching for differents in the setttings but i couldn't find any differtens. When I publish the project in a .swf still the project won't open.
    When I will get a preview in Web Browser or publish, the project is opening in the Web Browser and it looks like the project fade in and out in not even a second. A quick view of the background is visible . But i don't get any massage of error of something. And the page turn white.To preview the project in capitvate is no problem.
    I hope somebody could help me out.
    Roanne

    Hello,
    I do not know if you have Text Animations in your project? If yes, probably you are having issues due to the latest Flash Player. There is a hotfix to be found in this Captivate blog post:
    Solution for Captivate ...
    Lilybiri

  • Please help!!!!!!!!! My Mac won't let me sign in!!!!

    Someone please help!!!!!  Last night after having some issues with my mac I decided that it would be the best solution to restore my mac to a previous version saved on an external harddrive using the time machine!!!  That entire process went great and at the end I was asked to restart my mac and for whatever reason it won't let me sign in!!!!  I know I am entering the right password but it is telling me that I am unable to sign in due to an error that has occured!!!!  That's it, no error code no other reason!!!!  For the love of god someone please help me!!!!!  Everything is on that computer!!!!!  It is running on a Snow Leopard IOS 10.6.8!!!  I can't even get my disk out of it now to maybe try this process again and get it to work!!! PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Relax and read OS X: Changing or resetting an account password (Snow Leopard and earlier)
    http://support.apple.com/kb/ht1274

  • Photoshop CS6 upgrade won't let me sign in.

    Photoshop CS6 upgrade won't let me sign in.  When it's getting ready to download, after I put in my seriel number it asks me to sign in however when I push the button I get a window that says "Adobe Application Manager has stopped working - A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available." and makes me close the program.

    Try to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here are some links to help make contact:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/

  • ITunes won't let me sign in.

    iTunes won't let me sign in and it has said "iTunes is temporarily unavailable" for the past 3 weeks. How do I get it to sign me back in?

    Hello niall291,
    The following article provides information and tips that can help get you signed into the iTunes Store.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • Skype Won't Let Me Sign In

    Won't let me sign in. Says profile 70% complete. I have NO mobile phone. Help!!!

    Hi and welcome to the Skype Community,
    What you are looking at is the Skype web account page that is used to manage your Skype account features.
    In order to use all Skype features you need to install the Skype for Mac application. For that please start here: https://support.skype.com/en/faq/FA12015/getting-started-with-skype-mac
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • HT5861 iBooks won't let me sign in

    I just upgraded to Mavericks and was checking out the iBooks app. It transferred my current collection of books on itunes at this computer, but won't let me sign in to the app with my id. It won't even present the window or page to input my id and password. It just updated to version 1.0.1. Is anybody else having this issue?

    Hello Sean
    Check in the drop down menu Store > Sign In to see if the menu pops up to sign in.
    Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
    http://support.apple.com/kb/ht2589
    Regards,
    -Norm G.

  • I just updated to the latest aperture, i have projects previously saved on a drive (in the old version) that now won't load... how do i update them?

    Hi,
    i just updated to the latest aperture, i have projects previously saved on a drive (in the old version) that now won't load... how do i update them?

    But, unless I missed something, you are doing the repair with Aperture 3.5 so if 3.5 can't open an earlier library before doing the upgrade then unless I'm missing something the library will be upgraded before the repair is run, no?
    OT:
    You got me there, Frank - I wondered about the same thing, but Aperture is behaving differently, when upgrading a library, depending on if you are launching into the First Aid Tools or not.
    I repeated my experiments, to explore this difference:
    I restored an Aperture 3.4.3 library and launched the First Aid Tools:
    Apertur went directly into First Aid Mode without first asking to upgrade.
    Then "Repair" asked to be allowed to upgrade the library as you predicted.
    During the upgrade "Aperture"showed "Rebuilding", not "Repairing" or "upgrading". 
    Second experiment: When I only double-click the 3.4.3 library instead of repairing, the upgrade alert is very different:
    It takes a shorter time and does not show "rebuilding".
    I am quite certain, that Aperture will use a different upgrade prodecure, when launched into the First Aid panel for repairing or rebuilding.

  • My Robohelp html 8 project won't open after one warning and error message

    I'm currently using Robohelp HTML 8 and when I open my project  I first get the following message:
    After I click OK, I get this error message:
    The project won't open after that. When I look ate my files they seem to be intact even though the message says the folder is missing from
    Your help is greatly appreciated.
    Thank you,
    Joy

    Hi Joy
    Unless I'm mistaken, K would be a network drive, no?
    Unfortunately RoboHelp is only one of a host of applications that doesn't fare well if you try to make edits to a project while it resides on a network drive.
    Try copying the project to your local C drive. Perhaps create a folder named Projects and copy your project to a folder named Primo Intranet inside that folder so it looks like this:
    C:\Projects\Primo Intranet
    Once you do this, try opening your project again and you will likely have better luck.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • FCPX Project won't open

    Hi,
    I recently updated my fcpx after doing this one of my projects won't open. In the route project file an additional current version file has been produced it reads as follows - CurrentVersion.fcpproject-journal - Now. When I delete it FCP will open and try to read the project file but it then just wont open fcp at all it just stays on the screen saying reading project.
    Can anyone help?
    Tom

    Interesting…2 of everything.
    Close FCP. In the Finder, go your project folder and open it. Take the "normal-looking" back-up and move it one level up in the folder hierarchy, so it's at the same level as the CurrentVersion file – like so.
    If there is another oback-up (assuming there are two as in the event) take it and the the two CurrentVersion.fcp files and hide them – as Ian recommended – in a temp folder.
    Take a screen shot of your back up file in case you need to change the name back later. Change the name of the moved back up file to CurrentVersion.fcpproject.
    Open FCP and try to open the project.
    Russ

Maybe you are looking for