Score, Line Breaks, Preparing Parts (oh... Rohan?!?)
Couple of questions about preparing my parts from the score for a small string ensemble...
Got my conductor's score looking all spiffy. Now I need to extract my individual parts. I've done this a million times in the past and I always run into the same problems, so I thought it time to get some sagely advice.
1. Is there any way to "lock" line breaks so that when I create individual parts from my score that the line breaks I created for the conductor's score remain intact in my parts?
Seems that when I double-click on a particular part's staff to see just that part, my line breaks have been disregarded completely.
2. On a related note, taking Rohan's advice from another thread, I created a duplicate score style for each part that I was going to extract (never done that before). But when I selected the first duplicate score style (for preparing my violin 1 part), the score layout changed. I'm stumped...
This pic shows the first page of the conductor's score using my original Instrument Set:
The second pic shows what happened when I selected my duplicate Instrument Set. You can see how messed up it got...
iS,
i didn't mean make a duplicate of the full score , i meant make an instrument set of the individual instrument. that means there is only the one instrument in the entire set. you can then format it exactly as you need it to look and print pdf. how line breaks correspond to others is a bit of a mystery, but in general it looks right when i go into each part/instrument set even though i have no faith that it will. but at least each part will have its own individual size and appears to retain its line breaks.
the workflow i have found really reliable is:
- create the instrument sets for your parts and insert any extra markings working your way through the score and pdf-ing as you go.
- you may discover errors or omissions or something that you need to return to a previous part to correct, so you can then re-pdf.
- only once you have all the parts pdf-ed, pdf the score having first deleted all multi bar rests by selecting one in an event editor and then hitting 'select similar'. this is neceassry as multi-bar rests cause display problems. hopefully with LP8 we won't have to do that.
you DON'T save that version. you revert to save after pdf-ing the conductors score. i know it's silly, but the work around at the end only takes a moment. but going about it this way will virtually guarantee everything will turn out as it should.
Similar Messages
-
LE7:Score Layout:Global Format:Maximum Bars per Line - Line Break Bug!
Hello
This problem occurs in Logic Express version 7.
(I am using MacOS version 10.4.2 on an eMac)
I am currently compiling and editing a large score for a big band composition consisting of 22 parts:
Flute 1
Flute 2
Clarinet 1
Clarinet 2
Alto Sax 1
Alto Sax 2
Tenor Sax 1
Tenor Sax 2
Baritone Sax
Trombone 1
Trombone 2
Trombone 3
Trombone 4
Trumpet 1
Trumpet 2
Trumpet 3
Trumpet 4
Guitar
Keyboard
Electric Bass
Percussion 1 (Kit)
Percussion 2 (Aux)
I am creating the score in a separate file, and I am combining parts into 1 stave each by instrument like this:
Flute 1 & 2
Clarinet 1 & 2
Alto Sax 1 & 2
Tenor Sax 1 & 2
Baritone Sax
Trombone 1 - 4
Trumpet 1 - 4
Guitar
Keyboard (2 staves)
Bass
Percussion
Each instrument, with the exception of keyboard which has 2 staves, consists of one stave, making up systems of twelve staves each. By sizing down each score style to 2,
I have managed to fit 2 systems onto each page, therefore significantly reducing the amount of paper needed.
The problem comes when organising the layout of my score,
in particular, the line breaks. Using layout:global format, I have limited the maximum number of bars per line to 8, both in the page edit and normal score mode.
I am trying to divide up my score so that there are 8 bars per system. Using the white arrow tool, I am dragging bars up and down in order to achieve this.
However, when I get 30 odd bars in, I discover a system with 12 bars crammed into it - and even printing it off, it is clear that the system could benefit with less bars; the notation is squashed up together and not very easy to read.
THIS IS THE ACTUAL PROBLEM:
So I tried using the white arrow to move the last 4 bars down onto the next system, and a bug occurs where I end up with about 20 bars on the system, oddly distorted, the first few bars of which are squashed up together at the beginning of the line, and the last bar of which is stretched far off the right hand side of the page out of view. Then the next 20 or so bars are no where to be seen (probably far off the right hand side of the page) before the system below.
If you dont know what I am talking about, I could provide a screenshot if you request.
I have tried everything to get 8 bars on that particular system; dragging the stretched bar downwards, dragging squashed bars downward, moving bars down 1 by 1, moving bars onto the system above, moving bars away from the system below (to make room for the 4 bars that I want to move from above), adding more bars and dragging them down, but none of these methods have worked. I am either stuck with 12 bars crammed onto one system and 4 bars on the next or an oddly distorted version of the system which cannot possibly be read. Even when I settle with the unsatistactory former, I encounter further problems on subsequent systems below, some systems of which are already distorted.
All I want is to have 8 bars per system, it should not be too much to ask! The layout:global format:maximum-bars-per-line calculation seems to be redundant, even when I reset the default line breaks - it just does not automatically set 8 bars per line, which it should do. Is there not an option to determine bars individually by number onto their respective lines, without having to use the white arrow graphic layout tool?
The problem is extremely frustrating, and it is preventing me from completing, presenting and handing in a score for my university music composition.
I have no other score producing software, and starting it
from scratch on paper is going to take me weeks, because it consists of 830 12/8 bars in 22 parts, and I need to get it ready by next term!
Any help would be extremely helpful and much appreciated, especially a patch or a useful way round. It could be related to memory, or hard drive space, as I have experienced similar problems in the past, where my score has been stretched off the page during a time when I have had little disk space...and this is a very large piece of music which might stretch the score capabilities of Logic.
If so, has anyone got any suggestions?
Thanks!
Rory
eMac Mac OS X (10.4.2)
eMac Mac OS X (10.4.2)nope just cutting should work.
here are some things to try:
1. try assigning a different score style. for the regions. duplicate and then adjust the default ones if necessary.
2. try creating a new instrument set. in fact delete them and make a new one (use the key command: create instrument set from selected)
3. it may be a formatting problem so check:
in global layout constant spacing (try 8 or 9) and proportional spacing (try 45 or so). then try factory defaults.
4. try copying and pasting the midi into a brand new region and looking at the score for that.
5. try fiddling with the layout tool drqagging bars up or down.
normally simply cutting the region of just one object is enough to force a redraw. maybe try it on all of the regions. what happens when you double click on a region? -
Exporting EPUB from InDesign CC not including line breaks
I am done with a book and have it formatted the way I want. I am exporting it to EPUB through InDesign CC and previewing it in iBooks and also through Kindle previewer. Everything is fine except for one thing... where I have created page breaks, the exported file is not including them.
I tried exporting to HTML just to see what it did and there is no line breaks there. I know its proprietary markup ( in kindle ) but I still would like to include them in a few specific places ( to mark seperations of chapters ).
In kindle this is the tag they say to use: <mbp:pagebreak />
In iBooks, I have not yet figured out how to create them, I am going to work on that today once I sort out the kindle version.
Is there any way to force it to include line breaks on export. Or alternatively, I could export to HTML but I am having trouble figuring out how to go back to the EPUB format from there and also it didn't include the fonts, so there was other issues to consider as I have a custom font I was using for the headers that looks really good and matches the font on the book cover as well... so I really want to keep that consistent if possible.
Are there any tricks or things I can try here to improve on my workflow and do a better job of seperating the chapters ?Ok, I hadn't tested the advanced options out in the export menu. It works and does so on both the iBooks and Kindle previewer.. which is good news since that is really important to me to try and find a workflow I can update both of these formats from when I continue to work on my book.
The only strange part is that on some chapters its adding an extra blank page between the chapter and the next. What is odd is that it only happens on some of them (in the iBook reader only, the kindle previewer isn't doing this)
I am going to look into this more closely but its not a major deal as I would prefer a little seperation in the chapters anyways, its not really a bad thing. It is just hard to figure out why its doing this. -
Not sure why line break is not working
Hi all,
Here is part of my simple Swing application:
String text1 = "hello";
String text2 = "world";
String text3 = text1+"\n"+text2;
// have also tried (String text3 = text1+"\n\r"+text2;)
displayField.setText(text3);I supposed that the text3 in the label field (displayField) would display like this:
hello
world
But not, the text3 just displayed in the same line like this instead: helloworld.
I am not sure why the line break is not working.Use HTML for a multiline JLabel.// String text3 = text1+"\n"+text2;
String text3 = "<html>" + text1 + "<br/>" + text2 + "</html>";db -
Unable to find line break between two lines in attachment file.
Dear all I will be very great full if someone help me out,
I am trying to send mail through SMTP server with an attachment of oracle report, but I am unable to find line break between two lines, when I down load the attachment from mail and open attach.txt file by double click on it. Next line starts right after previous line ends, it should starts with new line.
In order to send an attachment file, I am reading source file line by line and put MIME protocol’s attachment instance, contain of source file is being properly written into target file if I open that attachment on cmd prompt.
Following code may help you to understand the case.
Thanks in advance.
My code is as follows:-
create or replace procedure bec_file_test
v_subject varchar2, -- Subject of the email
v_body varchar2, -- Body of the email
v_from VARCHAR2 default 'XYZ.com', -- sender mail id
v_to varchar2 default 'XYZ.com', -- Field To of the email
v_cc varchar2 default 'XYZ.com' -- cc address
) is
-- variable to hold the smtp server connection
v_smtp_connection utl_smtp.connection;
-- variable to hold the smtp host name
v_smtp_host varchar2(100) default 'mail.bec-group.com';
-- variable to hold the smtp port
v_smtp_port number default 25;
-- composite of {CR}{LF} caridge return and line feed.
CRLF varchar2(2):=CHR(13)||CHR(10);
cursor pr_rec is
select requisition_no,line_no,release_no,a.contract,
a.project_id,substr(a.activity_seq,1,11)ACT_SEQ,
substr(a.part_no,1,12)PART_NO,
substr(a.description,1,32)DESCRIPTION,
substr(a.Bal_qty,1,8) BAL_QTY,
substr(a.unit_meas,1,5)UOM,
a.wanted_receipt_date WAN_REC_DT,
a.latest_order_date LAT_ORD_DT
from bec_pr_line_rep a
where a.Bal_qty>0 and a.header_state not in 'Closed'
and upper(a.state1) like 'RELEASED' and a.contract not in ('U1ENG','ULENG','U1FND','U2FND')
and a.buyer_code='70306'
order by a.part_no;
begin
declare
fHandle UTL_FILE.FILE_TYPE;
v_msg_line varchar2(2000);
-- v_buffer varchar2(20000);
--ALTER SYSTEM SET utl_file_dir = 'D:\Database\temp'
--COMMENT='Temporary change on Dec 14'
--SCOPE=SPFILE;
SELECT name, value
FROM gv$parameter
WHERE name = 'utl_file_dir';
--drop directory my_directory
--CREATE or replace DIRECTORY my_directory AS 'D:\database\temp';
--GRANT read,write ON DIRECTORY my_directory TO PUBLIC;
begin ---writing data into a file.
fHandle := UTL_FILE.FOPEN('MY_DIRECTORY', 'pending_pr_summry.txt', 'w');
UTL_FILE.put_line(fHandle, ' Pending PR to process (detail report)');
UTL_FILE.put_line(fHandle,TO_CHAR(SYSDATE,'MM-DD-YY HH:MI:SS AM'));
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, 'Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt' );
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
for pr_temp in pr_rec loop
begin
v_msg_line:=to_char(rpad(pr_temp.requisition_no,12,' ')||'|'||
lpad(pr_temp.line_no,3,' ')||'|'||
lpad(pr_temp.release_no,3,' ')||'|'||
rpad(pr_temp.contract,7,' ')||'|'||
lpad(nvl(pr_temp.project_id,' '),7,' ')||'|'||
lpad(nvl(pr_temp.act_seq,' '),12,' ')||'|'||
lpad(pr_temp.part_no,12,' ')||'|'||
rpad(pr_temp.description,35,' ')||'|'||
lpad(pr_temp.bal_qty,10,' ')||'|'||
rpad(pr_temp.uom,6,' ')||'|'||
lpad(pr_temp.wan_rec_dt,14,' ')||'|'||
lpad(pr_temp.lat_ord_dt,14,' '));
UTL_FILE.put_line(fHandle,v_msg_line);
end;
end loop;
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, ' Regards : IFSAPP ( Application owner ) ');
UTL_FILE.FCLOSE(fHandle); ------------writing into file is successfuly done here!
--Reading of file starts here containt will be added in attchment file
fHandle :=UTL_FILE.FOPEN('MY_DIRECTORY','pending_pr_summry.txt','R' );
-- establish the connection to the smtp server
v_smtp_connection := utl_smtp.open_connection(v_smtp_host, v_smtp_port); /** OPEN CONNECTION ON THE SERVER **/
-- perform a handshake with the smtp server
utl_smtp.helo(v_smtp_connection, v_smtp_host); /** DO THE INITIAL HAND SHAKE **/
-- set the 'from' address of the message
utl_smtp.mail(v_smtp_connection, v_from);
-- add the recipient to the message
utl_smtp.rcpt(v_smtp_connection, v_to);
-- send the email
utl_smtp.open_data(v_smtp_connection);
v_msg_line:='Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || CRLF ||
'From: ' || v_from || CRLF ||
'Subject: ' || v_subject || CRLF ||
'To: ' || v_to || CRLF ||
'Cc: ' || v_cc || CRLF ||
'MIME-Version: 1.0'|| CRLF || -- Use MIME mail standard
'Content-Type: multipart/mixed;'||CRLF ||
' boundary="-----SECBOUND"'||CRLF||
CRLF ||'-------SECBOUND'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'Content-Transfer_Encoding: 7bit'|| CRLF ||
CRLF ||v_body|| CRLF; -- Message body
utl_smtp.write_data(v_smtp_connection,v_msg_line);
v_msg_line:='-------SECBOUND'|| CRLF ||
'Content-Type: application/octet-stream;'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'name="pending_pr_summry.txt"'|| CRLF ||
'Content-Transfer_Encoding: 8bit'|| CRLF ||
'Content-Disposition: attachment;'|| CRLF ||
' filename="pending_pr_summry.txt"'|| CRLF || CRLF; -- Content of attachment
utl_smtp.write_data(v_smtp_connection,v_msg_line);
-- check file is opened
IF utl_file.is_open(fHandle) THEN
-- loop lines in the file
LOOP
BEGIN -- Content of attachment
utl_file.get_line(fHandle,v_msg_line);
v_msg_line:=concat(v_msg_line,CRLF);
utl_smtp.write_data(v_smtp_connection,v_msg_line);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
END IF;
--end of attachment containt
utl_smtp.write_data(v_smtp_connection,v_msg_line);
UTL_FILE.FCLOSE(fHandle);
utl_smtp.close_data(v_smtp_connection);
utl_smtp.quit(v_smtp_connection);
exception
when utl_smtp.invalid_operation then
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
when utl_smtp.transient_error then
dbms_output.put_line(' Temporary e-mail issue - try again');
when utl_smtp.permanent_error then
dbms_output.put_line(' Permanent Error Encountered.');
when others then
dbms_output.put_line('Exception: SQLCODE=' || SQLCODE || ' SQLERRM=' || SQLERRM);
RAISE;
end;
end bec_file_test;Pending PR to process (detail report)01-17-13 12:43:19 PM--------------------------------------------------------------------------------------------------------------------------------------------------Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt--------------------------------------------------------------------------------------------------------------------------------------------------MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade |500|kg |30-NOV-2012| 20-nov-2012MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012MAT/250606 | 2| |NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | |1|NMDCJ|6001|100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1|pkt | 25-DEC-2013| 14-dec-2013--------------------------------------------------------------------------------------------------------------------------------------------------
where as source file is like that:-
Pending PR to process (detail report)
01-17-13 12:43:19 PM
Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt
MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade | 5500|kg | 30-NOV-2012| 20-nov-2012
MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012
MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012
MAT/250606 | 2| 1|NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012
MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1 |pkt | 25-DEC-2013| 14-dec-2013
Ignore alignment. It is well formatted in source file. -
Line Breaks missing in captions from other programs...
I've spent the last few hours searching around, and I've been unable to find any solution to a weird thing I noticed.
I've recently purchased LR 3.4.1 and when I imported a handful of older pics that had had the captions set using Bridge, the line breaks were now gone.
I then went to Bridge and tested it, and sure enough, it can read line breaks from LR, but the opposite doesn't seem to be true. As part of my work, I get a bunch of photos that other photogs have shot and added captions to via Bridge, but I can't seem to find any check box or setting on how to get LR to read the line breaks.
Any one have any advice on how to get LR to read line breaks from other programs? I'd hate to have to go through and re-caption each and every single photo, especially when adding the older ones into LR to use it as a DAM.
Thanks!This is a long-standing, annoying bug in Windows LR that has been acknowledged by Adobe:
http://feedback.photoshop.com/photoshop_family/topics/newline_bug_in_caption_text
Please go to the feedback site and vote for that issue to get fixed.
It is just a display problem in LR -- the line breaks in the metadata are preserved, and if you enter line breaks in the metadata, they are preserved too. -
File adapter-How to set line break in text file-split record into two lines
Dear Guru's,
I have to solve following problem with XML (with mulitiple records) to TEXT file scenario using file adapter. I have to output for ever ONE data record in XML always two identical lines in text file. Second line should have a little bit different mapping in few fields like date,... So I did duplicate fileds in my output structure in mapping and need to know how to set line break in the middle and see half of structure in first line and next structure half in second line
My output structure in mapping is:
CASHFLOW
- INTERFACE
- GESELLSCHAFT
- ANWENDUNG
- PRODUKT
- VERTRAG
- BETRAG
- WAEHRUNG
- DIRECTION
- BEWEGUNGSTYP
- FAELLIGKEIT
- ZINSFESTSTELLUNG
- ZAHLUNGSTAG
- RENDITE
- INTERFACE2
- GESELLSCHAFT2
- ANWENDUNG2
- PRODUKT2
- VERTRAG2
- BETRAG2
- WAEHRUNG2
- DIRECTION2
- BEWEGUNGSTYP2
- FAELLIGKEIT2
- ZINSFESTSTELLUNG2
- ZAHLUNGSTAG2
- RENDITE2
Question is how can I set on receiving file adapter in Content Conversion Parameters that fields from first structure half INTERFACE...RENDITE should be outputed in one line and fields from second half of structure INTERFACE2...RENDITE2 should start on second line in final text file.
I'm getting at the moment one line only and I need to know how can set line break so that second line starting with INTERFACE2(CA)...RENDITE2 will start in new line.
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000",CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
This should be final output:
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000"
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
My file adapter settings:
RecordsetStructure=CASHFLOW
CASHFLOW.fieldNames=INTERFACE,GESELLSCHAFT,ANWENDUNG,PRODUKT,VERTRAG,BETRAG,WAEHRUNG,DIRECTION,BEWEGUNGSTYP,FAELLIGKEIT,ZINSFESTSTELLUNG,ZAHLUNGSTAG,RENDITE
CASHFLOW.fieldSeparator=,
CASHFLOW.endSeparator='nl'
CASHFLOW.fieldNames=INTERFACE2,GESELLSCHAFT2,ANWENDUNG2,PRODUKT2,VERTRAG2,BETRAG2,WAEHRUNG2,DIRECTION2,BEWEGUNGSTYP2,FAELLIGKEIT2,ZINSFESTSTELLUNG2,ZAHLUNGSTAG2,RENDITE2
CASHFLOW.fieldSeparator=,
It wont help if I add two identical structures in mapping because in output i would see for multiple entries section with first lines only and after that section with second lines only. And CASHFLOW is one part of more complex mapping ...
(This is final output structure RecordsetStructure=HEADER,CASHFLOW,CONDITION,REFERENCE,CONTRACT - more sections with different data and all these should have duplicate lines at the end)
Thanks a lot for any help
Cheers
Marian
Edited by: Marian Luscon on Jul 14, 2009 11:44 AMHi Ivan,
right, I did test just for sure.
Putting constant 'nl' into field CASHFLOW-INTERFACE1 didnt help - still getting one line instead two lines.
CA ,"0100" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,2 ,12 ,2009-01-28 ,2009-01-27 ,2009-01-28 ,"0.0000000" ,'nl' ,"GTP1" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,1 ,10 ,2009-01-27 ,2009-01-27 ,2009-01-27 ,"0.0000000"
So there is still question. Is there any way (mapping,...) how to output always 2 lines in text file for one record in XML. It always does 1 record in mapping structure = 1 line but we need 2 lines ...
Example:
Input: 4 records in XML
Output: 8 lines in final text file ...
Thanks to you all guys
Marian -
How to handle line break embeded inside CSV column
Hi there,
I am under the pressure to make it work. I already put this question on APEX forum, but on second thought, I think it relates more to PL/SQL rather than APEX since APEX 4.1 already have utility to handle CSV Upload.
If you read it already in APEX forum, please ignore.
I am sorry for that. Thanks for reading.
I need to develop an app that allows user to upload CSV file to a interface table.
The APEX version at my workplace is 4.0.2.
I used the code from
http://dbswh.webhop.net/htmldb/f?p=BLOG:READ:0::::ARTICLE:11000346061523
It all works well till recently I find out
If a column in a CSV file cotain a line break (or new line) e.g. (The tester copy and paste this text which has line break into a column in a spreadsheet)
This is the first sentence.
This is the second sentence.
It will break the “This is the second sentence”. To a new column.
The contents of the CSV viewed in Notepad look as below
Assessment Date,Scheduled Date,Assessment Provider,Assessor Name,Court,First Name,Middle Name,Last Name,PRN Person Record Number,NHI Number,Defendant Attended Y/N,Is Dependent Y/N,Notes,Primary Ethnicity,"Ethnicity Other, please specify",Gender,Currently in Treatment Y/N,Substance of Concern 5,Other Substance Specified
22/09/2012,,Provider Co Name,Warren Edgley,Wellington,,,Salty,2545554,dgsdf,ergerg,,"This is the first sentence.
This is the second sentence.",Japanese,,Female,b,,
Here is the code from the CSV UTIL, please help me to find out how can I replace the line break to a space so that the uploading process is correct.
CREATE OR REPLACE PACKAGE BODY "CSV_UTIL"
AS
--strip the beginning and the end quotes, then replace double quotation with single
FUNCTION de_quote (p_str IN VARCHAR2, p_enc_by IN VARCHAR2)
RETURN VARCHAR2
IS
v_str VARCHAR2(32767) := p_str;
BEGIN
IF (p_enc_by IS NULL)
THEN
RETURN p_str;
ELSE
IF SUBSTR(p_str,-1) = p_enc_by THEN
v_str := SUBSTR(p_str,1,LENGTH(p_str)-1);
END IF;
IF SUBSTR(p_str,1,1) = p_enc_by THEN
v_str := SUBSTR(v_str,2);
END IF;
RETURN REPLACE (v_str,
p_enc_by || p_enc_by,
p_enc_by
END IF;
END de_quote;
PROCEDURE parse (p_str IN VARCHAR2, p_enc_by IN VARCHAR2, p_sep IN VARCHAR2)
IS
l_n NUMBER DEFAULT 1;
l_in_quote BOOLEAN DEFAULT FALSE;
l_ch NCHAR (1);
l_len NUMBER DEFAULT NVL (LENGTH (p_str), 0);
BEGIN
IF (l_len = 0)
THEN
RETURN;
END IF;
g_words := g_empty;
g_words (1) := NULL;
FOR i IN 1 .. l_len
LOOP
l_ch := SUBSTR (p_str, i, 1);
IF (l_ch = p_enc_by)
THEN
l_in_quote := NOT l_in_quote;
END IF;
IF (l_ch = p_sep AND NOT l_in_quote)
THEN
l_n := l_n + 1;
g_words (l_n) := NULL;
ELSE
g_words (l_n) := g_words (l_n) || l_ch;
END IF;
END LOOP;
g_words (l_n) := de_quote (g_words (l_n), CHR(10));
g_words (l_n) := de_quote (g_words (l_n), CHR(13));
FOR i IN 1 .. l_n
LOOP
g_words (i) := de_quote (g_words (i), p_enc_by);
END LOOP;
END parse;
Author: Oleg Lihvoinen
Company: DbSWH
Changes:
10.02.2011, There was a miscalculation of the file line last position in case it is the end of file
PROCEDURE upload (p_file_name VARCHAR2, p_collection_name VARCHAR2, p_enc_by IN VARCHAR2, p_sep_by IN VARCHAR2, p_rows NUMBER)
IS
v_blob_data BLOB;
v_clob_data CLOB;
v_clob_len NUMBER;
v_position NUMBER;
v_char NCHAR (1);
c_chunk_len NUMBER := 1;
v_line VARCHAR2 (32767) := NULL;
v_data_array vcarray;
v_rows NUMBER := 0;
n_seq NUMBER := 1;
dest_offset NUMBER := 1;
src_offset NUMBER := 1;
amount INTEGER := DBMS_LOB.lobmaxsize;
blob_csid NUMBER := DBMS_LOB.default_csid;
lang_ctx INTEGER := DBMS_LOB.default_lang_ctx;
warning INTEGER;
l_sep VARCHAR2(100) := CASE WHEN p_sep_by = '\t' THEN chr(9) ELSE p_sep_by END;
BEGIN
htmldb_collection.create_or_truncate_collection
(p_collection_name => p_collection_name);
-- Read blob from wwv_flow_files
SELECT blob_content
INTO v_blob_data
FROM wwv_flow_files
WHERE NAME = p_file_name;
v_position := 1;
DBMS_LOB.createtemporary (lob_loc => v_clob_data,
CACHE => TRUE,
dur => DBMS_LOB.SESSION
DBMS_LOB.converttoclob (v_clob_data,
v_blob_data,
amount,
dest_offset,
src_offset,
blob_csid,
lang_ctx,
warning
v_clob_len := DBMS_LOB.getlength (v_clob_data);
IF v_clob_len = 0 THEN
RETURN;
END IF;
WHILE (v_position <= v_clob_len + 1)
LOOP
v_char := DBMS_LOB.SUBSTR (v_clob_data, c_chunk_len, v_position);
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When the whole line is retrieved and not end of file or end of file
IF v_char = CHR (10) AND v_position < v_clob_len OR v_position = v_clob_len + 1
THEN
parse (p_str => v_line, p_enc_by => p_enc_by, p_sep => l_sep);
v_data_array := g_words;
FOR i IN 1..g_words.count LOOP
IF i <= 50 THEN
v_data_array(i) := g_words(i);
ELSE
exit;
END IF;
END LOOP;
FOR i IN g_words.count + 1..50 LOOP
v_data_array(i) := null;
END LOOP;
v_rows := v_rows + 1;
-- exit if uploaded specified number of rows
IF p_rows IS NOT NULL AND v_rows > p_rows THEN
EXIT;
END IF;
-- Store data to collection
n_seq :=
htmldb_collection.add_member
(p_collection_name => p_collection_name,
p_c001 => v_data_array
(1),
p_c002 => v_data_array
(2),
p_c003 => v_data_array
(3),
p_c004 => v_data_array
(4),
p_c005 => v_data_array
(5),
p_c006 => v_data_array
(6),
p_c007 => v_data_array
(7),
p_c008 => v_data_array
(8),
p_c009 => v_data_array
(9),
p_c010 => v_data_array
(10),
p_c011 => v_data_array
(11),
p_c012 => v_data_array
(12),
p_c013 => v_data_array
(13),
p_c014 => v_data_array
(14),
p_c015 => v_data_array
(15),
p_c016 => v_data_array
(16),
p_c017 => v_data_array
(17),
p_c018 => v_data_array
(18),
p_c019 => v_data_array
(19),
p_c020 => v_data_array
(20),
p_c021 => v_data_array
(21),
p_c022 => v_data_array
(22),
p_c023 => v_data_array
(23),
p_c024 => v_data_array
(24),
p_c025 => v_data_array
(25),
p_c026 => v_data_array
(26),
p_c027 => v_data_array
(27),
p_c028 => v_data_array
(28),
p_c029 => v_data_array
(29),
p_c030 => v_data_array
(30),
p_c031 => v_data_array
(31),
p_c032 => v_data_array
(32),
p_c033 => v_data_array
(33),
p_c034 => v_data_array
(34),
p_c035 => v_data_array
(35),
p_c036 => v_data_array
(36),
p_c037 => v_data_array
(37),
p_c038 => v_data_array
(38),
p_c039 => v_data_array
(39),
p_c040 => v_data_array
(40),
p_c041 => v_data_array
(41),
p_c042 => v_data_array
(42),
p_c043 => v_data_array
(43),
p_c044 => v_data_array
(44),
p_c045 => v_data_array
(45),
p_c046 => v_data_array
(46),
p_c047 => v_data_array
(47),
p_c048 => v_data_array
(48),
p_c049 => v_data_array
(49),
p_c050 => v_data_array
(50)
-- Clear the line
v_line := NULL;
END IF;
END LOOP;
END;
END;In my apps, I save these straight into a table rather than an APEX collection because the number of columns can be longer than 50.
I want to find out how can replace these line break inside a column to a space.
If any one has any ideas, please let me know.
Thanks a lot in advance.
AnnAnn586341 wrote:
I think the code split the whole thing by this line
-- When the whole line is retrieved and not end of file or end of file
IF v_char = CHR (10) AND v_position < v_clob_len OR v_position = v_clob_len + 1
THEN
Yes, exactly. That piece of code believes all CHR(10) occurences are record delimiters.
It is not smart enough to recognize that a CHR(10) within quotation marks are part of the data.
Optimally a solution should keep the CHR(10) rather than replacing with spaces, but that will be a bigger rewrite of the UTL_CSV code ;-)
If you are happy with replacing with spaces, a "simple" solution could be something like:
Declare a boolean variable in upload procedure:
v_within_text_column boolean := false;And use it like this:
WHILE (v_position <= v_clob_len + 1)
LOOP
v_char := DBMS_LOB.SUBSTR (v_clob_data, c_chunk_len, v_position);
IF v_char = '"' THEN
v_within_text_column := NOT v_within_text_column;
ELSIF v_char = CHR(10) AND v_within_text_column THEN
v_char := ' ';
END IF;
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When the whole line is retrieved and not end of file or end of file
IF v_char = CHR (10) AND v_position < v_clob_len OR v_position = v_clob_len + 1
THEN
v_within_text_column := false; -- To be safe always set this on "true" linebreaks
{code}
+(This is untested code just written here in the text editor.)+
It should work by toggling a flag whether you are "within" the quotes or not and then replacing CHR(10) with a space if you are within a text column.
This way we avoid having to go through the clob more than once (it is enough that this code walks the clob one character at a time...)
It will not handle if the clob contains situations like:
{code}
abc,123,"This is a text with a quote from a man who said \"To Be,
or Not To Be\" some hundred years ago",123,xyz
{code}
Escaped quotes would need separate attention ;-) -
Output with line breaks seemingly randomly placed
Hola -
I've adapted Tyler Muth's RSS feed article (http://tylermuth.wordpress.com/2008/01/22/producing-rss-from-plsql/) for the most part successfully; however, my output has breaks in the lines at inappropriate places, often in the mddle of an XML element tag for example. The placement of the breaks varies if I change the values of l_idx, l_len, l_defrows, l_maxrows, and l_desclen, but the breaks persist. They're not reflected in the code below but I've added the utl_file.fflush to no good effect.
Examples of broken output:
<pre>
<title>Three
prehistoric inventions that shaped us /</title>
<guid
isPermaLink="false">226402455778123622</guid>
<pubDate>Thu, 04 Aug 2011 12:36:22
EST</pubDate>
<guid isPermaLink="fal
se">220922455778123622</guid>
<item
>
</pre>
It's a lot of data so I won't post it here, but here's the code & the table; any ideas as to where to start investigating will be greatly appreciated.
Code:
create or replace
PROCEDURE "RSSLOOP3" ( fund_in IN VARCHAR2, fund_in2 IN VARCHAR2 := 'XXX')
is
-- customizable parameters
l_title varchar2(255) := ' New Titles Since ' || to_char(sysdate - 90, 'MM/DD/YYYY');
l_link varchar2(255) := 'replace this' || fund_in || '.rss';
l_description varchar2(255) := 'This is a feed of changes to items ' || fund_in;
l_language varchar2(255) := 'en-us';
-- end customizable parameters
l_version varchar2(10) := '2.0';
l_clob clob;
l_idx pls_integer := 1;
l_len pls_integer := 255;
l_defrows pls_integer := 100;
l_maxrows pls_integer := 100;
l_desclen pls_integer := 250;
-- for output to file
fh UTL_FILE.FILE_TYPE;
path VARCHAR2(30);
filename VARCHAR2(30);
begin
path := '/http/live/screens/rss/';
filename := fund_in || '.rss';
fh := UTL_FILE.FOPEN(path, filename, 'w');
for i in (
select xmlelement( "rss",
-- Begin XML Header Block
xmlattributes( l_version as "version"),
xmlelement( "channel",
xmlforest( l_title as "title",
l_link as "link",
l_description as "description",
l_language as "language"),
-- End XML Header Block
-- Begin List of Individual Articles or Items
xmlagg(
xmlelement( "item",
xmlelement("title", x.title),
xmlelement("link", x.link),
xmlelement("description", convert(x.description, 'UTF8', 'AL32UTF8')),
xmlelement("callnum", x.callnum),
xmlelement("pubDate", to_char(x.updated_on,'Dy, DD Mon RRRR hh24:mi:ss')),
xmlelement("guid", XMLATTRIBUTES('false' as "isPermaLink"),x.id||to_char(x.updated_on,'JHH24MISS'))
-- End List of Individual Articles or Items
) as result
from ( -- Actual Database Query that populates the list of Items
select id,title,link,description,updated_on, callnum
from drx_rss_feeds
where (fund like fund_in||'%')
and rownum < (l_maxrows+1)) x)
loop
l_clob := xmltype.extract(i.result,'/').getclobval;
exit;
end loop; --i
--- OUTPUT RESULTS
for i in 1..ceil(dbms_lob.getlength(l_clob)/l_len) loop
UTL_FILE.PUT_LINE(fh,(substr(l_clob,l_idx,l_len)));
l_idx := l_idx + l_len;
end loop; --i
UTL_FILE.FCLOSE(fh);
end rssloop3;
Table:
CREATE TABLE "DRX_RSS_FEEDS"
"ID" VARCHAR2(32 BYTE),
"TITLE" VARCHAR2(255 BYTE),
"DESCRIPTION" VARCHAR2(4000 BYTE),
"LINK" VARCHAR2(1000 BYTE),
"AUTHOR" VARCHAR2(255 BYTE),
"UPDATED_ON" DATE,
"CALLNUM" VARCHAR2(255 BYTE),
"FUND" VARCHAR2(10 BYTE)
)Or have a look at the Oracle Documentation, for instance at the parameters for utl_file.fopen
max_linesize Maximum number of characters for each line, including the
newline character, for this file (minimum value 1, maximum
value 32767). If unspecified, Oracle supplies a default value of
1024.It wouldn't surprise me if your randomly placed line breaks are all 1023 characters a part.
Anton -
How to put line break in the text
Hi guys,
This is a simple problem.i don't know how to concat a line break while creating a text.
I am looping through the results of a query and want to form the text using the results.
For each row of the resultset,I want to create a new line in the text i create.
I was wondering how to put a new line in the text.
I thought I can concat '\n' ,but it does not work.
the code snippet in the procedure is :
for c1_rec in c1 loop
vMsg := ' There are ' || c1_rec.total ||
' documents of type ' || c1_rec.doc_type || '\n' ;
end loop;
Please give the solution.
Thanks in advance.Thank you Mark.
I tried your suggestion.But line break is not working in email.
Here is how my code is
in procedure 1 ,i create the message String as :
for c1_rec in c1 loop
vMsg := vMsg || ' ' || today_str || ' - ' || c1_rec.total ||
' Total inbound documents from : ' || c1_rec.target_value || CHR(13)||CHR10) ;
dbms_output.put_line(' ' || vMsg);
end loop;
--here sending mail calling another procedure
sendmail( '[email protected]' ,'[email protected]' , 'Test Subject ' , vMsg );
In Procedure 2( i.e sendmail procedure )
i am preparing email server connection from and to adresses .Then i am preparing and sending message as
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
conn:= utl_smtp.open_connection( EmailServer, Port );
utl_smtp.helo( conn, EmailServer );
utl_smtp.mail( conn, SENDER);
utl_smtp.rcpt( conn, RECEIVER )
mesg:= 'Subject: ' || SUBJECT || crlf ||
'Date: '||TO_CHAR( SYSDATE, 'Dy, dd Mon yyyy hh24:mi:ss' )||
crlf ||
'From:'||SENDER|| crlf ||
'To: '||RECEIVER || crlf ||
'Content-Type: text/html; charset=ISO-8859-1' || crlf ||
'' || crlf || MESSAGE ;
utl_smtp.data( conn, mesg );
utl_smtp.quit( conn );
even now the mail we are getting is not having the line break.I am having line break in dbms output,but not in the mail.
Is there any mistake how I am sending the mail.Or is there any other way we can put line break in the text
Thank you. -
[solved] How to have line breaks in output of journalctl log
Hello,
How can I have line breaks in the journalctl log output?
At the moment I cannot read most of the log output because it does not fit into my terminal.
See this screenshot: http://i.imgur.com/nUR6Fae.png
Thanks!
Last edited by orschiro (2013-09-20 08:08:04)You can run
journalctl -b --no-pager | less
Edit: If you hit 'h' you get help screen
SUMMARY OF LESS COMMANDS
<snip>
ESC-) RightArrow * Left one half screen width (or N positions).
ESC-( LeftArrow * Right one half screen width (or N positions).
<snip>
It may be possible to configure the way the journal uses the pager so it wraps the lines by default.
Edit 2: Or maybe it can't be configured.
man journalctl wrote:The output is paged through less by default, and long lines are "truncated" to screen width. The hidden part can be viewed by using the left-arrow and right-arrow keys. Paging can be disabled, see --no-pager and section Environment below.
Last edited by karol (2013-09-20 08:02:13) -
How to set line break points in JSF Facelets files on NetBeans?
I am running debugger on NetBeans. I can set line break points for jsp files but cannot for Facelets files with extension 'xhtml'. Dose anybody know how to set break points for Facelets xhtml files? Or is it possible to set break points for xhtml filles?
Thank you very much.You can't. They aren't executable code, they are templates. The only executable code is the part inside #{}.
-
VSTO: How to set line break in Ribbon Xml?
Hi All,
I have a button in Ribbon.xml. it looks like:
<group label="myLabel" id="View">
<checkBox id="cbView" label="ViewViewviewviewview" getPressed="cbView_Pressed"/>
</group>
The result is shown as:
The checkbox is too long. My question is : How to set line break in checkbox's label.
Thanks a lot,
By the way, in Ribbon Xml. How to add RadioButton?Hello Ricky,
The Fluent UI (aka Ribbon UI) doesn't provide any attribute or callback for that. You can try to use an escape sequence "\n\r", but I am not sure whether it helps. Also you may consider placing a text block below the check box control.
You can read more about the Ribbon UI in the following series of articles:
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3) -
How to protect a text from line break in smartforms
Hi Gurus,
How to protect line break in a text element of smartforms. Text in that line is printing exactly 70 characters. I want the text to be printed fully till the size of the window. How to stop this automatic line break.
Regards,
Rithika.What I have done may be helpful, so here are the details:
I had a table of text values, so I converted this to a string with concatenate, then string to a long character field, then used RKD_WORD_WRAP to put into table of 132 characters. Then I constructed a table of type tline by looping at my RKD_WORD_WRAP output, and utilized SAVE_TEXT to temporarily store a TEXT entry, like you would save with SO10, saving my desired paragraph format into TDFORMAT field and inserting any necessary character format commands into the text.
In my SmartForm, I then have dynamic text processing pointing to the internal table fieldnames containing tdname, tdid, tdobject, tdspras of what I saved. This allows SmartForms to utilize the full width of the window and optimize text output, based on window width, font, scale, paragraph format, character format, etc. These text identifier values are passed as part of my internal table via the SmartForms interface.
At the end of SmartForms processing, I loop at my internal table and utilize DELETE_TEXT to remove the temporary texts that I created for this set of output.
To avoid page breaks in my text, I put my output for a "block" of data into a folder (see the SmartForms folder feature). I have page protection on the folder...that way, SmartForms examines the length of the folder content and decides whether a page break should occur before any output for my block of data begins. My block of data contains a few data elements over 5 rows of output followed by two separate dynamic texts of various lengths. If the entire block won't fit on the remaining part of a page, page-break occurs first. -
We have a form that users input
biliography information (name of book, pages, date published, etc) into a text area. they can input multiple articles at once in the text area. is there a way to intoduce a line break on the pdf in between each article? meaning can we tell the users to input something like a % in between articles and have then some how introduce a line break on the pdf for every %?You can use the coldfusion replace function to replace any string with either an html break tag, or the appropriate chr functions, depending on how you are generating your line breaks. That's the easy part.
The first hard part is to get 100% of your users to do what you want 100% of the time.
The second part is to figure out the difference between a symbol, such as a percentage sign, that is supposed to indicate a line break as opposed to simply being part of the article.
Maybe you are looking for
-
Printing Oracle 10g Reports in Line Matrix Printers
Hello! I encountered problem when printing a generated report in Oracle 10g Reports to a Line Printer. When the report is in PDF format, the fonts when printed on line printers become scattered and the orientation of the report rotates 90 degrees. If
-
Why do I always get this message?
Photoshop Camera Raw 7.4-Update Installation fehlgeschlagen Fehlercode: U44M1P7
-
I need to cancel my supscription of Export PDF and I need it done today nov 10 2014 !!!
I want to cancel my annual subscription of Export PDF,
-
I'm trying to compile pango 1.8.0 on a Solaris 10 workstation. The default configure runs okay but when I try to run make is fails with the errors shown below. Any advise on how I can get pango to compile would be greatly appeciated. ---make output--
-
Combine two DSLR for video shooting
I've recently bought D70 kit EF-S 18-135mm + EF 50mm 1.4. I'm new to these DSLR cameras and the main purpose was to shoot cenimatic full HD videos. I came to know later that the D70 isn't a full frame camera. Now I need to add one more DSLR to shoot