SCreen Different While using LSMW

hi,
While doing recording in LSMW using t.code XD01-customer create i am getting a screen where the first filed is customer then company code but while processing the batch input it goes to a different screen where the first filed is account group why is it happening?

Are you using a transaction variant for XD01? my XD01 online transaction has as well the account group as first field.
the standard object for customer master load is as well in the fist step of LSWM, right above the recording section.
Press F4 und you will usually find it immediatly among other entries in the first page.
Object 0050 method 0000

Similar Messages

UIImagePickerController Custom Overlay Black Screen issue while using Video trimming controller

Hello Everyone ,
I have problem while opening camera in recording mode using UIImagePicker Controller with custom overlay and it should open first time properly .But when i push to next view controller and return back again to open camera at that time camera displays black screen for few time.
The Logic in the inside view controller is for VideoTrimming . For video trimming i have used "SAVideoRangeSlider" controll. SAVideoRange Silder perform task to get all thumbnail images from video which i have assign . It uses AVAsset image generator class provided by apple to get image frames from videos and it runs in background using its handler method.
Handler Method ::
[self.imageGenerator generateCGImagesAsynchronouslyForTimes:times
                                              completionHandler:^(CMTime requestedTime, CGImageRef image, CMTime actualTime,
                                                                  AVAssetImageGeneratorResult result, NSError *error) {
I have nilling all the objects related to image generator class when i came back to Camera screen. still issues of black screen occur while opening camera.
This issue occur in ios7 but not in ios6.
Can anyone have any idea about this ...Please relply me ASAP.

Hello Everyone ,
I have problem while opening camera in recording mode using UIImagePicker Controller with custom overlay and it should open first time properly .But when i push to next view controller and return back again to open camera at that time camera displays black screen for few time.
The Logic in the inside view controller is for VideoTrimming . For video trimming i have used "SAVideoRangeSlider" controll. SAVideoRange Silder perform task to get all thumbnail images from video which i have assign . It uses AVAsset image generator class provided by apple to get image frames from videos and it runs in background using its handler method.
Handler Method ::
[self.imageGenerator generateCGImagesAsynchronouslyForTimes:times
                                              completionHandler:^(CMTime requestedTime, CGImageRef image, CMTime actualTime,
                                                                  AVAssetImageGeneratorResult result, NSError *error) {
I have nilling all the objects related to image generator class when i came back to Camera screen. still issues of black screen occur while opening camera.
This issue occur in ios7 but not in ios6.
Can anyone have any idea about this ...Please relply me ASAP.

Screen flickers while using external display

while using my macbook pro with an external display (my sony LCD TV). the external screen (TV) flickers. it goes black for about a second then comes on. it will happen about 20 minutes into watching TV and happens more often the longer i watch. for example i just finished watching a 40 minute video podcast it happened at the halfway point then more often - about 10 minutes later then 5 minutes later - then 2 minutes... the final minutes of the show it happened about 3 times before the end.
any help? any ideas? i suspect (though i can't prove) it has to do with the setting for the external display.
thanks

Can you run memory diagnostics ? Download a pre-compiled bootable iso from http://www.memtest.org/ down the page and make a bootable CD. Boot to this CD and run RAM diagnostic for a couple of hours, maybe overnight, and see if your laptop has RAM errors.
If you have no RAM defect after the long test above, then uninstall all ATI/AMD gfx card drivers in Programs and Feature in Control Panel. Now go to Device Manager and disable your gfx card, putting a checkmark in the box Uninstall drivers for this hardware. ( Please note this operation will not harm your computer. Windows will redetect your gfx card after restart. )
Restart as required by Windows 7.
You may have to disable and then enable the gfx card in Device Manager several times until you are left with VGA drivers only. ( Computer gurus suggest using a Driver Sweeper/Driver Cleaner program. But I do the driver cleaning chore myself. You may go to C:\Windows\System32\DRIVERS folder and manually delete Atikmpag.sys, Atikmdag.sys drivers. )
Now you can re-install the ATI/AMD drivers that you have downloaded from hp suppport.
Hope this helps.

Can't use my screen saver while using front row for music?

When I work I have my computer on the desk next to me, usually I have music playing and my very large image library running through my screen saver. I used to be able to start up my music using the remote, going through front row. I'd start up the music and back out. It would just return to my screen saver at that point.
Now when I try to do that, I can't back out of front row without also backing out of my music. It's kind of annoying... I mean, I can just start up itunes and go from there, but it was a nice function that I really got used to.
Does anyone know of a setting that I can adjust that would allow me to do this again?
Thanks

The way it used to work, I'd already have my screen saver running, I'd open front row from my remote, and just start up itunes through that. I'd never actually see the itunes app because it would just open on the toolbar. As soon as I backed out of front row it would automatically go right back to the screen saver while still playing my music. All from across the room.
Now I have to go over to my computer, open up itunes, start that up, windowshade it to the dock, then hot corner my screen saver again. All sitting right at the desk.
It was a nice convenience. I don't understand the loss. At least give us the option to open it in the background in preferences. I've always appreciated the fact that Apple let us use our computers the way we like. This just seems counterintuitive.

TS3367 why does my screen freeze while using face time?

Why does my screen freeze on my iphone 4 while using face time? I am connected to wi-fi and internet is working fine.

Is your iPhone storage capacity full or close to it?
Try a reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release. A reset is similar to computer restart.

Occasional black screen unexpectedly while using my iMac.

I've had three or four occasions in the year since I've had my new iMac (27") when the screen has gone black unexpectedly. It takes several mouse clicks or taps of the Escape key to get the screen to come back - any thoughts (it is not the screensaver cutting in)?

If you have just been using the iMac and it then suddenly goes black, you have a probable hardware problem. Software, other than the screen going to sleep due to computer inactivity for a while, would not create a black screen.
Hope this helps

Turning off screensaver/keeping screen on while using GPS (TeleNav)

Hi all,
I'm trying to use TeleVan on my Curve 8900. After 2 minutes the screen turns itself off though and needs to be woken up again. Is there any way of stopping this from happening, i.e. of changing a setting either within the BB software or TeleNav? Within the BB software I've tried Options > Screen/Keyboard > Backlight Timeout but the longest duration there is 2 minutes; I'd like to keep the backlight on permanently when using TeleNav. I've checked within TeleNav but can't find a setting that would override the BB one. Any pointers?
Thanks
Eric

ericbaber wrote:
Hi all,
I'm trying to use TeleVan on my Curve 8900. After 2 minutes the screen turns itself off though and needs to be woken up again. Is there any way of stopping this from happening, i.e. of changing a setting either within the BB software or TeleNav? Within the BB software I've tried Options > Screen/Keyboard > Backlight Timeout but the longest duration there is 2 minutes; I'd like to keep the backlight on permanently when using TeleNav. I've checked within TeleNav but can't find a setting that would override the BB one. Any pointers?
Thanks
Eric
I can't see a way. I don't know that you want to. When its time for a new direction, it will light up again. Running that way to will drain your battery although, actually, I find that telenav is a heavy battery user and put it on the car charger when I use it.

Screen Flickering while using screen

I am using tilda in openbox.
Until I enabled "Double Buffering" in tilda, I was facing the same flickering issue in tilda too. By flickering, I mean that suppose I open a frest terminal in that & then I press BACKSPACE, I get a flicker in screen window.
I have tried opening screen in gnome-terminal too, same problem.
I really want to use screen as complete replacement to tabs, but this flickering issue is holding me back. Any solution?

mikesd wrote:
Turn off visual bell. In your screenrc add:
vbell off
Check the man page for details.
Problem solved. Thanks.

How can I use the entire screen width while using fluid grids?

Starting to play around with fluid grids in CS6. If you start with the fluid grid template, in the desktop layout (for example), the gridContainer is 88.5% wide. It appears you should do everything within the gridContainer div. With that being said, If I want to create different visual effects on my page that use a true 100% of the width, how do I do that and stay within this design structure/methodology?
This seems pretty basic but I don't want to start off by breaking the rules or hacking in a work around
Thanks in advance.
Donna

While starting with the FG Design you can set the widths to 100% in the New Document Dialog
If you have already into the design of your page , you can modify the gridcontainer classes in your css as below
.gridContainer {
          margin-left: auto;
          margin-right: auto;
width: 100%;
          padding-left: 0%;
          padding-right: 0%;
          clear: none;
          float: none;

Dump; while using LSMW with RFBIBL00.

Hi,
I am using Standard Batch/direct input method.
Ending up with a dump with the following error message:
The reason for the exception is:
The program attempted to interpret the value "/" as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
    IF BBKPF-PROPMANO(1)                 NE NODATA.
     CLEAR: FTPOST-FNAM, FTPOST-FVAL.
      FTPOST-FNAM = 'BKPF-PROPMANO                    '.
      FTPOST-FVAL = BBKPF-PROPMANO                   .
    APPEND FTPOST.
   ENDIF.
215    >>>   IF BBKPF-VATDATE(1)                  NE NODATA.
      CLEAR: FTPOST-FNAM, FTPOST-FVAL.
      FTPOST-FNAM = 'BKPF-VATDATE                     '.
       FTPOST-FVAL = BBKPF-VATDATE                    .
       APPEND FTPOST.
   ENDIF.
ENDFORM.
This code is a part of include program RFBIBL02.
While i am testing the same project in the sandbox system, it's working fine, as the condition
"IF BBKPF-VATDATE(1) NE NODATA"
is not there in the program RFBIBL02 (in sandbox system) .
Is there any way to bypass this condition or any other way to get it resolved?
Please suggest me a relevant solution.
Thanks.

Hi ,
If u r not passing any value to the date field then no data value will be taken as '/'.
As date field cannot be given as '/' u r getting the dump.
Please clear the date field if there is no data. u can give the following piece of code in mapping section of that date field.
If not aritems-vatdate is initial.
bbkpf-vatdate = aritems-vatdate.
else.
clear bbkpf-vatdate.
endif.
this will clear the '/' value if there is no data in date field.
Reward points if useful.
Asif

How to keep screen on while using Sprint Navigation?

I have the problem where the BB screen goes black after several seconds without use. How do I stop this from happening when I am using Sprint Navigation? I've looked in Options/Adv. Options to no avail. Please advise.

Bifocals wrote:
You might try BBLIGHT it's freeware and you can set parameters for your backlght to stay on longer.
Here is the link:
http://www.blackberryfreaks.com/BBlight.html
Please let me know if this resolves the issue, or if you need more information!
That copy is old (1.82), go to BlackBerryForums for the latest version (1.85) of BBLight. One of the BBF members updated BBlight earlier this year.

Why won't my screen rotate while using iMessage? The screen lock icon is not on.

I checked the Control screen and the icon that should be black is. My screen doesn't rotate.

Try this:
Quit all apps: Double tap the Home button and swipe the app preview page up
and
Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

Iphone 5 screen freezes while using apps

Very frustrating problem. I have to power off, then open with the home button. This allows the phone to work, but it freezes back up shortly thereafter.
This is a brand new Iphone 5. I had a problem with my first iphone 5, the volume down button just stopped working. Took it to the store, and they gave me a replacement phone. This new replacement phone has been doing this ever since I got it. Probably freezing 5-10 times per day, minimum.
I am now doing a restore on the phone, hoping that this is a software issue.

you can try and explain the story but there is no way to prove that the drop didnt cause it or didnt. most likely they will not replace for free.

Upload multiple files using lsmw

I have to upload 2 different files using lsmw..
Please explain me the procedure..
I made the option as sequential file in specified files..
but i am getting error.. Using different sequential files is not allowed...

is der some problem or just u need clarification?
When I import the data everything seems fine... 52 entries from file 1, and 682 entries from file 2.
In my "Fieldmapping and conversion rules" i have a statement like this:
read table FILE2 with key oldsls = FILE1-lgart.
My problem is that FILE2 is empty, even that I saw in my import screen that 682 entries was imported.
in one statement, you are saying ki it seems fine then u r saying that ur file 2 is empty. HOW CAN U UPLOAD DATA FROM AN EMPTY FILE ?
and we don't don anything in field mappng until unless v don't use complex stuctures while uploading data. LSMW takes care of everything by itself.
Most important thing is
reward point
hope this will help
bye tc
sandy
waiting for reward point

Gray screen while using mac book pro

While using my mac book pro the screen suddenly turnef gray. I tried restarting my computer, but the screen remained gray. I don't know what to do please help!!!

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

SCreen Different While using LSMW

Similar Messages

Maybe you are looking for