Screen EXIT - Not getting TKNUM value in any of the include

Hi All,
In my requirement,
1. I need a copy screen 2800 of function group LMOB into Custom screen 9800(subscreen) of Function group XLRF. - done.
2. Created the variant 1 for the custom screen 9800
3.I need to check the shipment status based on the shipment number and issue a warning message. For that I implemented logic in both the USER-EXIT EXIT_SAPLLMOB_910.
I am getting my screen 9800 while executing successfully.
My problem here is, Shipment Number is not passing to any of the above USER EXIT (CALL CUSTOMER-FUNCTION '910').
When I am debugging VTTK-TKNUM value is empty even though I passed the value from the screen 9800.
I am getting the message as "Shipment does not exist" AFTER 'F1 SAVE'.
And 'F2 Clr' button also not working.
Could anyone help me do this.
Thanks in Advance.

Use this statement in source code.
output = input.

Similar Messages

Screen Exit not getting transported - Urgent

Hello Everyone
We are implementing the enhancement PPCO0012 to display additional data in a tab on the Production Order Header. Did everything as per the documentation and activated the enhancement in SMOD and the associated project in CMOD. The transports were released to QA. The enhancement and CMOD project is also active in QA. However the screen object that was created under the function group XCO1 did not get transported to QA. Has anyone experienced this kind of a situation before?. Can you please suggest any solution to overcome this? Any help is greatly appreciated.
Thanks
Raju Ramaswamy

Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

Deperaction Area 32 screen is not getting dispalyed in Production Via ABAA.

Hi,
When we are trying to Post the unplanned depreciation on prior-year acquisitions (640) via ABAA, we are getting an error message that Deprecation Area 32 should be Zero, We have check the OADB ( Display view asset accounting: define depreciation area) configuration setting, where Posting to G\L is maintained as u2013 0 (No values are posted in General Ledger). Then we have advised the key user to make the value ZERO for Deprecation 32 when he posts the unplanned depreciation on prior-year acquisitions via ABAA.
But the problem here we are facing in Pre production server (XZB) when we post unplanned depreciation on prior-year acquisitions via ABAA where we are getting THREE Pop window screens like Deprecation Area 02, 32, 90 but when we are doing the same in Production Server (PZB) where we are getting TWO Pop window screens like Deprecation Area 02, 90, Deprecation area 32 pop window screen is not getting displayed, can some help me in resolving this Issue.
Thanks a lot in advance.
Rajesh Kumar Mantri

hi,
Check in t-code OABU whether your area allows UP depreciation.The setting in OABU should NOT be contradictory to the
selection made inside the depreciation area .Means,if you select the option "no values allowed" for unplaned depreciation, in the
definition od depreciation area, then it wil overwrite the setting in OABU.
I guess this is the reason fior your issue.
Hope this helps.
Regards
Raghav

JPA Error:Could not get a value to be injected from the factory

HI friends ,
I am trying to replicate the example JPAEXample01 using JPA in CE1 from the blogs written by
Sabine Heider/Adrian Görler.
During the testing of the method create employee i am getting the following error.
"Could not get a value to be injected from the factory."
I tried couple of examples using the above process, still held up with same error.
Any pointers to trouble shoot this ?
Thanks in advance
Chandra Dasari

HI Isaias Cristiano Barroso,
There are lot of enries most of them pertaining to properties set to yes or no.
out of which therre are tow errors. the log is as follows
Message Info: Failed (javax.management.MBeanPermission,#[:j2eeType=trace,name=EndToEndCentralMBean,],isActive,getGuidByName,getTraceLevelByName,getTraceLevelByName,importTrace,isFileExistsLocally,removeTraceFile)java.lang.reflect.InvocationTargetException
Failed (javax.management.MBeanPermission,*,DISPLAY)java.lang.reflect.InvocationTargetException
category: com.sap.security.core.role.PermissionData
Location:com.sap.security.core.role.PermissionData.get(ClassLoader)
Frankly the above log is above my understanding ,Prob it may help to you undertand my the issue
Thanks once again

My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge, after updating to ios 8.0.1

My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge. Even on long pressing power button - screen doesn't showing anything - not even "needs charging logo".
This is happening only since I have updated to new ios version (ios 8.1).
Is there anyone facing similar issue?? Any suggestion?!?

Hi jayla_mora,
Thanks for visiting Apple Support Communities.
It sounds like your iPhone screen is going blank and not responding.
You may find the tips in this article useful for troubleshooting this behavior:
iOS: Not responding or does not turn on - Apple Support
Best Regards,
Jeremy

JAPEXample01 published in sdn:error Could not get a value to be injected

HI friends ,
I am trying to replicate the example JPAEXample01 using JPA in CE1 from the blogs written by
Sabine Heider/Adrian Görler.
During the testing of the method create employee i am getting the following error.
"Could not get a value to be injected from the factory."
I tried couple of examples using the above process, still held up with same error.
Any pointers to trouble shoot this ?
Thanks in advance
Chandra Dasari.

HI Pritya Ranjan,
Let me know the entities and their relations ships you are using for quicker response.
To know the proper error, use the path as mentioned
nwa->problem management ->logs & traces->locks.
Email the error code,
The issue might be because of some many probabilities mentioned below.
Point no 1
Are you using Named queries : If so check the queries syntax, the syntax used here is different from regulat sql queries.
Point no 2:
Are you using Java DIctionary or generic db and connecting to max db?
check this part also
Point no 3:
Check your connection profile parameters:
Point no 4 :
Check the data-source-alias,persistence.xml and data-source.xml parameters..
Beacuse i trouble shooted a lot on JPA's and found why the typical error's occurs.
Regards
chandra dasari

I have an iphone 3gs. i do not get push notifications from any application. can you help me?

I have an iphone 3gs. i do not get push notifications from any application. can you help me?

Do you have Notifications turned On and setup for each desired app?
Settings > Notifications

BI Query with Hierarchy in VC does not get correct values

Hello Gurus,
I am building a model in VC for Performance Score card using Query as data service.
I have the following problem.
When I execute query in BEx with Hierachy_node variable , it is getting correct values, but the same is getting incorrect values in VC.
The Hierarcynode variable I am using is a TOP node, then the values including child nodes are also should be displayed, which is working fine with BEx query but not in VC.
When I execute the query with hierarchy node value as child node I am getting correct values both in VC and in BEx.
The correct values are not shown only when I use top nodes.
Please help me in this regard.
Thanks in advance
Ganesh

Hi
We are facing the same issue. Is this issue resolved? Pls let us know the solution
Regards
Aruna

I have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

i have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

From what I can see, unless you're doing things with old versions of Xcode on a Mac (in which case, the solution seems to be to upgrade to the latest version), this seems to e an iTunes issue.
Accepting that it works fine with another iPad, I suggest trying the following:
1. Restart the non-working iPad
2. If that doesn't work, reinstall iTunes. If you're on a Windows PC, I suggest using Control Panel to uninstall all the Apple apps, restarting the PC, and doing a fresh install. If you're using a Mac, a repair permissions might help too.
iTunes 10.3 is now available, and that may make a difference.

I tried to restore from 4.2.1 to 4.3.3 through iTunes my iphone4 was on state after restore it gave error 3194 and my phone got black screen its not getting on what to do to turn on it

I tried to restore from 4.2.1 to 4.3.3 through iTunes my iphone4 was on state after restore it gave error 3194 and my phone got black screen its not getting on what to do to turn on it

http://support.apple.com/kb/TS3694#error3194

I can not get link-value from af:tree.

Hello.
I use jdeveloper 10g.
I can not get link-value from tree.
I use following code:
<f:facet name="nodeStamp">
<h:panelGroup binding="#{backing_dialogDic_dic_ETS.panelGroup1}"
id="panelGroup1">
<h:outputText value="#{item.vidNum} #{item.vidName}"
binding="#{backing_dialogDic_dic_ETS.outputText1}"
id="outputText1"/>
<af:commandLink
binding="#{backing_dialogDic_dic_ETS.commandLink2}"
id="commandLink2"
action="#{backing_dialogDic_dic_ETS.returnObject}">
<af:setActionListener from="#{item.idVid}"
to="#{processScope.ETSId}"/>
<af:objectImage source="/images/icons/10.gif"
shortDesc="Выбрать"
binding="#{backing_dialogDic_dic_ETS.objectImage2}"
id="objectImage2"/>
</af:commandLink>
</h:panelGroup>
</f:facet>
</af:tree>
//in java bean:
public String return_Object() {
Object ob = JSFUtils.getManagedBeanValue("processScope.ETSId");
System.out.println(o);
return null;
In console I see null.
How I get this value???
I can get this value if i use treeTable instead of tree.
Thx, Dema.

Hi,
not that I think it matters, but the processScope is not a managed bean but a memory scope. So if
JSFUtils.getManagedBeanValue("processScope.ETSId");
assumes a managed bean then this may be incorrect as most likely there exist no managed bean with this name. You should be able to access the process scope from AdfFacesContext.getProcessScope(), which then returns a Map, which you call get("ETSId") on
Frank

I am having an iPad 4. I am not getting alerts while receiving any call in my ipad. Is there any solution for this?

I am having an iPad 4. I am not getting alerts while receiving any call in my ipad. Is there any solution for this?

Check your settings
Settings>Notifications>FaceTime/Message>Alert Style

I have been using pages for months and now I can not get it to open any templet or previous document to open?

I have been using pages for months and now I can not get it to open any templet or previous document to open?

A little more information would be helpful.
What version of Pages are you using? The latest is 4.1 with the update released on July 20. In Snow Leopard 10.6.8 you need at least Pages 4.0.5. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '09 folder in Applications. That iWork folder must be named iWork '09. If it doesn't have the '09 Software Update won't find them & the updaters won't work.
If you are running at least Pages 4.0.5 & haven't made any other changes to your Mac since Pages was last working correctly, the likely culprit is corrupt preferences. Go to HD > Users > (your account) > Library > Preferences & delete the com.apple.iwork.pages.plst & restart Pages.

[svn:osmf:] 11359: Fixing MetadataWatcher not invoking a value change callback when the parent facet of the target value is added or removed .

Revision: 11359
Author:   [email protected]
Date:     2009-11-02 05:20:01 -0800 (Mon, 02 Nov 2009)
Log Message:
Fixing MetadataWatcher not invoking a value change callback when the parent facet of the target value is added or removed.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/metadata/MetadataWatcher.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/metadata/TestMetadataUtils.as

mikeporter wrote:
I'm sorry I'm not aware of any "cumbersome" subpanels - unless of course you don't know what you're doing. There is this wonderful invention called a "subVI" that can be used to organize and simplify your code, or are they too "cumbersome" as well? You should really learn a bit about what you are pontificating over before you start running off at the mouth.
Mike...
I didn't want to step on your toes. No need to get personal.
Subpanels make some additional code necessary that hasn't got to do anything with the actual program. And I AM using subIVs as I wrote in my first post, which is exactly the root of the problem.
Nevertheless I now solved it in a way that comes close to what I wanted. I don't know if some of you meant your suggestions to be understood that way (at least I didn't ). The subVIs will now "insert" themselves (via invoke node) into a subpanel on the main vi, which they are given a reference of at call. This adds minimal aditional code, especially on the main VI which I want to keep as clean as possible. By clustering the panel reference into the parameters the subVIs are already given (not used in the example I attached below), there isn't even a change on the terminals of the subVIs.
I got to check now if this works well with event structures within the subVIs or if it can create the same problems like multiple event structures within a single VI.
So no global variables anymore and no writing values by property node. I don't know if this just wasn't possible in previous Labview versions I had a try at that (I guess it was 8.6 and/or 2009) or I just didn't come up with the idea back then.
And if the text wasn't that helpful, here are two screens:
Parent VI:
SubVI:
Attachments:
main.png ‏2 KB
subvi.png ‏5 KB

Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.

Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
I work in full screen almost exclusively ... the toolbar and the URL are still displayed while in full screen.
Before this version (30.0), when I minimized Firefox to the taskbar so that I could go to the desktop or to Windows Explorer, when I finished what I was doing and re-selected Firefox it would go back to full screen. Now, it does not go back to full screen. I can still see the taskbar. I have to press [f11] two more times to get back to full screen.
I have tried with and without addons enabled. Same behavior. I have reset Firefox ... same behavior.
I'm using Firefox 30.0 and Windows 7 (64 bit).
Thanks.

Hi moose53,
Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

Screen EXIT - Not getting TKNUM value in any of the include

Similar Messages

Maybe you are looking for