Screen Frame little problem
Hello, i have a New Black MacBook. Everything is all right.. except factory details of some elements (is apple victim of his success??).. Well, the problem is that the frame of the screen is not well fixed at the bottom near the "macbook" print logo. it looks like some fixing clips are out or somthing like this.
What can i do? turn it back or fixit myself with double sided tape?
Also, the caracters on the keyboard are not center printed... well, its a detail but for me Apple was the Top of details on all the macs i had... no comparaison with PC world... But now...
I am a Mac User since the 80's and i am a little desapointed about those details.
Can you tell me if i am a detail maniac or i am right! thanks. Alex
Yes i know they could fix that... but i'm afraid to get something worst back and stay long time without my "babybook" ahaha..
Also, where i leave, there is a technical office, (independant certified Apple i hope)... and not very gentil ;-(
Thanks 4 the answer!!
Alex
Similar Messages
-
My ipod touch 4will not respond unless I hook it up to the computer. It never goes pasthe logo apple screen.It never restores fully. Cant tell if this is a screen or software problem.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 if a 64 GB one and $99 for the other 4G iPods. They do not fix yours.
Apple - iPod Repair price -
Little problem ALV - Download to Excel
Hi Friends !
I have a little problem, when the user download the data which are in ALV, the positions of columns change .
Example:
In ALV.
1 - Column A
2 - Column B
3 - Column C
In Excel
1 - Column B
2 - Column A
3 - Column C
Regards !!!This sounds pretty weird. Are they just running ALV and then they do a download on the ALV screen using the Excel icon? Are they running it with some type of Excel template? Is it using a special layout - if so are they sure they saved the layout before they download? Never heard of or saw this one before. Also are you the Cesar I worked with a few years ago in Memphis? Just wondering - don't think this will help much but let me know.
-
I own a zen micro 5gB 3 months, and was satisfied of it, but now it begins to...disapoint me a little...Sometimes it just froze on startup screen, or when the "zen micro" logo was displayed, so the only thing to do was to remove the battery then reboot...Until one day, when this funny message appeared : "Hardware problem" ..... I sent the player back to support, and got another one, 2 weeks ago... But it still freeze sometimes! Not EVERYtimes, but VERY often...When i try a remove battery/reboot, it displays "rebuilding library" and sometimes freeze after completing, and again and again even after removing the battery... It did it several times since i've acquired the player... The only thing to do then is a clean up through recovery mode... Despite that, when it's on, i don't have any problems playing music...
-Is it due to the few left disk space? I splitted the disk: 3GB for the library, 2 for datas, and filled up the library (only mB left)
-The version of the firmware is ..0, i think it's the last one?
I think that's all, please tell me if you need additional informations...
Thanks a lot
PS: Yes admins, i've searched the faqs and other helps, but they always say the same thing: Remove the battery then reboot...Message Edited by AmShagar on 2-02-2005 02:29 AMI had this problem for weeks despite reloading firmware, formatting player etc the answer to your little problem is to hit pause before turning the player off. If the cd/tracks you were listening to have finished you can just turn your player off.
I had problems of zen logo splitting in half, re-building library problems, fuzz, buzz and squeal noise etc. I have not had these problems since pausing the track before turning the player off.
Cheers
PS. SSR - None of my files are from P2P sites.
Message Edited by fizz on 2-03-2005 :4 PM -
3D product rotation images sequence little problem
Hi!
I made a sequence of images and make the code the rotate around it but I have a little problem with the loop ( from frame 100 to 1 || 1 to 100 ).
You can take a look to the link here : http://sebastienouellette.com/productview/test.html
How can I avoid the little stick problem. I know what's the problem but I dont know how to solve it. It's with the frame tweening. Anyway, here's the code :
import flash.events.Event;
import com.greensock.*;
import com.greensock.easing.*;
import flash.events.MouseEvent;
var direct:String = "forward";
var objTotFrames:int = 490;
var ease:int = 5;
var targX:int = mouseX;
var drag:Boolean = false;
var ptX:int = 1;
var frame:int = 1;
var mousePos:int;
stage.addEventListener(Event.ENTER_FRAME, dragHandler, false, 0, true);
stage.addEventListener(MouseEvent.MOUSE_DOWN, downHandler, false, 0, true)
stage.addEventListener(MouseEvent.MOUSE_UP, upHandler, false, 0, true)
function dragHandler(e:Event):void
mousePos = -mouseX * 100 / objTotFrames;
if ( frame < 1 ) {
loopForward();
}else
if ( frame > 101 ) {
loopBackward();
}else
if (drag)
initAnim();
function initAnim():void {
targX = mousePos+ptX;
frame += (targX-frame);
TweenMax.to(mc, .3, {frame:frame});
//mc.gotoAndStop(frame);
function loopForward():void {
//TweenMax.killTweensOf(mc);
frame = 101;
ptX = frame - mousePos;
mc.gotoAndStop(101);
trace("off 1");
function loopBackward():void {
//TweenMax.killTweensOf(mc);
frame = 1;
ptX = frame - mousePos;
mc.gotoAndStop(1);
trace("over 1");
trace(frame);
function upHandler(event:MouseEvent):void
drag = false;
function downHandler(e:MouseEvent):void
ptX = frame - mousePos;
drag = true;
Thanks for your help!It doesnt work but I think think this is the problem because if you take a look to this example :
http://sebastienouellette.com/productview/test2.html
It works pretty well without the "easing" effect and the only think I change in the code is that I removed the line : TweenMax.to(mc, .3, {frame:frame}); and change it to a basic mc.gotoAndStop(frame); -
A little problem with color profiles
I am trying LR and so far I love it, it has successfully replaced RSP for me, and also beat Bibble which I briefly considered but didn't like due to the weird UI.
However, I have a little problem with colours, which has never happened so far with other converters, and I am hoping you can help me to solve it.
My monitor is calibrated with the Spyder and the appropriate profile loaded in the video card.
When I work on a RAW image in LR, and then export a sRGB JPG, and then open it with a browser, or the Win viewer, I see it redder. If I open the image in Faststone, I see it almost sepia.
If I export a TIFF and open it in PS, I see it as in LR, but when I export a JPG from PS (this is my typical workflow), the resulting image has the same problem.
Considering that my entire workflow is in sRGB, can anybody coach me as to the correct settings I must use in order to obtain a final sRGB image with the same colors as in LR? I think that I must be doing something wrong, as the program behaves consistently with PS.
Thank you in advance for any help you will be able to provide.
Andrea,
from ItalyFunny how it's only Windows users that have this 'problem'.
This is not a 'problem' at all. The only 'problem' here is that you've been used to using non-color-managed applications. Suddenly, Lightroom comes in as a mature, color-managed, program... and you're all going bonkers.
Mac users aren't going bonkers because we're used to using color-managed applications (Preview, Safari, etc. are all color-managed on a Mac).
Let me clarify for you that by 'color-managed', I mean that the software is *not only* reading the embedded profile in your image, but is *also* converting, on-the-fly, the RGB values of that image to a new set of RGB values that compensates for the native response of your monitor. Say, for example, your monitor only displays a narrow gamut of reds. Chances are, then, that LR or PS will intelligently compensate for this by saturating reds before sending to your monitor. This is how color management works. You can now imagine the disastrous effects that a bad/inaccurate monitor profile might have...
Your Windows applications, such as 'Viewer', use the Microsoft ICM 2.0 API. This *will* read the embedded profile in an image, but instead of converting to your monitor profile for output, will simply convert to sRGB. That's basically like half-a$$ color-management. Read more about it here:
http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/prork/prdn_img_vkev.ms px?mfr=true
Firefox & IE don't even use the ICM 2.9 API, making them entirely non-color-managed. Whatever the raw RGB values are in your image, these applications spit out at your monitor.
It's very important you understand these simple concepts before proceeding any further.
OK, ready?
The original monitor profile that came with my MacBook Pro (profiled by someone over at Apple generically for all MacBook Pro LCDs, I guess) really seems to have underestimated the gamut of my monitor. Hence, color-managed applications compensated for this be resaturating my images (especially in the oranges/reds) before outputting to monitor. Therefore, images looked really nice and saturated in color-managed applications; however, when I exported them to sRGB JPEGs and then uploaded to the web, they looked desaturated (in Firefox, NOT in Safari, since Safari is color managed). They even looked desaturated on other people's monitors (these 'other people' were your average Joes...).
I then profiled my monitor using an i1 colorimeter. A 3-D plot of my monitor profile now showed that it actually had a much larger gamut than what Apple had predicted in their profile (but this gamut was still much smaller than sRGB, or the gamut of my Dell LCD or Sony CRT, etc.). Therefore, now, LR and PS, using this new profile, showed images much less saturated. Now when I made my edits, and then exported to sRGB JPEGs, images looked slightly *more* saturated in non-color-managed applications and on other people's computers.
So, you see, your monitor profile affects how you make adjustments/edits in color-managed programs. If your hardware profiler profiled your monitor incorrectly (which I assume is the problem here), then you may be over-saturating certain colors within LR, skewing those RGB values so that a non-color-managed program, which will not re-correct these values as LR is doing, will display the image with too much, say, red.
Bad monitor profiling also explains why you see this problem only on certain images/colors... if it were a LR problem, you'd most likely see it on every export. The color variance is more than likely due to a bad monitor profile that is not accurately describing your monitor's native response... hence LR/PS are incorrectly adjusting your images before sending to the monitor.
And at this point, please don't resort to saying "but the colors in the web browser look 'right' and LR looks 'wrong'". This statement has no meaning, as what looks 'right' to you in your web browser might look horrible to someone else with a different monitor. The point of color-management is to minimize these differences. For example, I was very unhappy by how desaturated my images looked on the web compared to in PS before I calibrated my monitor. Now, images look slightly *more* saturated on the web than in LR/PS, which I'm OK with. *Should* they look the same? Heck no. Similar? Yes. Is it better if they do look the same after hardware profiling? Yes, if your main goal is web export, but, keep in mind, the only way they *would* look the same after PROPER hardware profiling would be if your monitor happened to have a very sRGB-like response (to explain this would take another few paragraphs... but you should be able to figure it out if you ponder a bit).
I hope this is making sense. Let me ask you a couple questions now:
1.) For your headshot image, IMG_8860, which colors look 'right' to you -- the colors in LR, or the colors upon export (i.e. the headshot on the left or the right in your link above)?
2.) How exactly did your profile your monitor? Was it in the dark? I had quite a bit of variance in my monitor profile depending on whether or not the Mac OS X dock was visible at the bottom of the screen -- the light from the dock leaked into the colorimeter which then led to profiles that generated yellow/green color casts.
-Rishi -
Does anybody have strange bumps on the screen frame?
I got a new Macbook Air 2013 one month ago. It looks pretty nice. The only strange thing I find is that when I slide my finger on the screen frame right beside the webcam, I feel two tiny bumps. If use eye scan it carefully, there are really two tiny bumps on it. It just seems like metal expantion but actually I don't think it's possible. I tried very hard to press them down but made nothing change. I want to know if anybody has the same problem with me. I found in a video clip that the thing behind this area is glue then magnetic pieces to close the lid.
Could anyone give me a explanation about what happened? I'm really puzzled.thats a buckled defect in mfg. of the alloy back-plate of the monitor.
since its a new Air, take it in for a new monitor or swap for a new Air at the discretion of the Apple.
Contact Apple for an appt. for a replacement monitor. -
HI All
I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
I used IMAQ AVI Read Frame VI
for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisitionHi abdelhady,
I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
Thank you,
Emily C
Applications Engineer
National Instruments -
Persistent blue screen of death problems on Toshiba laptop pc; need help
hey, guys,
I was hoping you could help me out here. I have been experiencing persistent blue screen of death problems on my Toshiba laptop since December 21 of 2014. The first two times I started having theses persistent issues, I downloaded a bunch of redundant programs and games onto my computer, some of which were virus infected. I had these programs on my computer for a while before my laptop was taken in for repairs. I eventually uninstalled some unnecesssary programs from my pc, hoping it would have fixed these issues, even tried windows update. I didn't have a clue that my problems were due to virus infections/malware until the two most recent times my computer was taken in for repairs; I had always been thinking it was a defective driver. My laptop has already been in for repairs at least twice due to these perpetual BSOD problems; I had Norton Internet Security installed on my pc before the Geek Squad team (who repaired my computer and found 312 traces of malware in my system during the virus test; I was told by them that I had mistakenly downloaded infected web browsers onto my pc) switched me to Webroot SecureAnywhere (they said it was better at detecting viruses/malware than my NIS), but even after my pc has been through repairs twice in a row, I am still experiencing blue screens (this only seems to have happened once each week, and on one occasion, I went through almost two weeks without it occurring). I am pretty sure, that I haven't downloaded anything onto my computer infected with viruses/malware (each of the scans done by my Webroot antivirus have found nothing), I have only a few games/apps installed on my pc, and what I downloaded all came from Microsoft's official website. I can't afford to be wasting any more money on repairs, and I am desperately searching for any possible way to fix this myself. Any help would be appreciated. I have a copy of two of the memory dumps from my most recent crashes (I also have the dump reports from my most recent crashes dating back to March 6; I got these from an app from NirSort called Blue Screen View, if you need those) I also have my system specs:
http://1drv.ms/1I6AsaE
http://1drv.ms/1Qdsb7T
Note that many of these earler dump reports (the ones from March) came from viruses. The ones from most recently as last month, I am not sure about.
Attachments:
POPCHOCK-PC.txt 149 KBSatellite C75D-B7300 (PSCLEU-009004)
Thrashing about this way gets us nowhere.
Best to restore the hard disk to its original out-of-the-box contents.
Settings > Change PC settings > Update and recovery tab > Recovery tab > Remove everything and reinstall Windows
Use the freshly restored machine for a day or so before any installations of hardware, software, or updates of any kind. If you get no crashes, the problem is not likely due to hardware.
Then add updates and other things slowly, keeping track of them. If you get crashes after that, give us the corresponding dmp files.
-Jerry -
I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
Here is an image of the issue
http://www.flickr.com/photos/67839707@N08/8884847081/I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed. -
Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.
I'm not trying to minimize your issues, but I have an iPhone 5S and find that I have not had these types of problems on AT&T. I'm wonding if something has gotten stuck in a loop that is continually trying to use data. If you make a good backup of your phone, try restoring it as new, and do not add anything to the phone right away. Let the device run like this for a little while and see what kind of usage you have. You report you phone is showing usage of 21GB. Did you rese this setting on the phone to begin at your billing period? The reason I ask this is some people believe this setting resets on its own with your billing period, it does not. This has to be manually reset by the user, so it might not be that accurate depending on the last time that you reset it.
If the phone seems to not use so much extra data during the period the device does not have extra apps on it, then try restoring from your backup and see what happens. If this increases your data usage quite fast again, then there is probably something corrupt in the backup that is causing this issue. -
Little problem with Photoshop ....
Hi. I have a little problem with photoshop CS 4. I use a color replacement tool to change a color in some details... but when i set new color, on pictures entries only or grey or black colors and nothing other... i dont known why.... please help . Thanks. Sorry for bad english
Usually the Color mode is the one you want for the color replacement tool, you
might have it set to luminosity or your trying replace black or white colors.
MTSTUNER -
Little problem with Strings.
I have an little problem with Strings, i make one comparision like this.
String nombre="Javier";
if( nombre.equalsIgnoreCase(output.getStringValue("CN_NOMBRESf",null)) )
Wich output.getStringValue("CN_NOMBRESf",null) is "Javier" too, because I display
this before and are equals.
What I do wrong?.
You are actually making your users key in things like
"\026"? Not very user-friendly, I would say. But
assuming that is the best way for you to get your
input, or if it's just you doing the input, the way to
change that 4-character string into the single
character that Java represents by '\026', you would
use a bit of code like this:char encoded =
(char)Integer.parseInt(substring(inputString, 1),
16);
DrClap has the right idea, except '\026' is octal, not hex. So change the radix from 16 to 8. Unicode is usually represented like '\u002A'. So it looks like you want:String s = "\\077";
System.out.println((char)Integer.parseInt(s.substring(1), 8));Now all you have to do is parse through the String and replace them, which I think shouldn't be too hard for you now :) -
I have a little problem with iphoto
Hi, i have a little problem when i used my iphoto.
First, i'm so sorry because my english is not fluent, but i hope that you understand me.
The problem is that, i can't see the photos when they are vertical, i mean, when i change my photos horizontal view to vertical view, i can't see the vertical photos.
Can you help me??? i dont understand what is the problem.
Thanks so much.
Lorena from ColombiaTry rebuild the library:
Hold down the apple and option (or alt) keys and launch iPhoto. Use the resulting dialogue to rebuild.
Regards
TD -
Nds Insert statement little problem
DB version XE 10g
Hello
I have little problem with my insert statement.
In my code, are many examples, but plz focus on V2 and V3 part.
As you can see V2 and V3 are not working
I get following errors
V2
Error report:
ORA-00984: column not allowed here
ORA-06512: AT line 28
00984. 00000 - "column not allowed here"
V3
Error report:
ORA-00917: missing comma
ORA-06512: AT line 33
00917. 00000 - "missing comma"
I really have no idea, why i'm getting these errors...
DROP TABLE FILMYARNOLD;
CREATE TABLE FILMYARNOLD
FIL_ID VARCHAR2 (329),
FIL_NAME VARCHAR2 (592),
FIL_YEAR VARCHAR2 (294),
FIL_ACTOR VARCHAR2 (392),
FIL_TEXTT VARCHAR2 (2596)
SET SERVEROUTPUT ON
DECLARE
TYPE FIL_TABLE IS TABLE OF VARCHAR2 (256);
vfilmiczki FIL_TABLE := fil_table();
statement VARCHAR2 (2048);
BEGIN
vfilmiczki.EXTEND;
vfilmiczki(1) := '77804';
vfilmiczki.EXTEND;
vfilmiczki(2) := 'Predator';
vfilmiczki.EXTEND;
vfilmiczki(3) := '1984';
vfilmiczki.EXTEND;
vfilmiczki(4) := 'Arnold';
vfilmiczki.EXTEND;
vfilmiczki(5) := 'get to the choppa';
/*statement := 'INSERT INTO FILMYARNOLD (FIL_ID, FIL_NAME, FIL_YEAR, FIL_ACTOR, FIL_TEXTT) VALUES ( ';
statement := statement|| '''chlip'',''lol'',''lol'',''chlip''';--
statement := statement||',''hmm'')';*/
-------V1------------working-----------------
--statement := 'INSERT INTO FILMYARNOLD (FIL_ID) VALUES ( ';
--statement := statement||vfilmiczki(1)||' )';
--EXECUTE IMMEDIATE statement;
--------V2-------------------- not working -----------------------------------------
--statement := 'INSERT INTO FILMYARNOLD (FIL_ID, FIL_NAME) VALUES ( ';
--statement := statement||vfilmiczki(1)||','||vfilmiczki(2)||' )';
--EXECUTE IMMEDIATE statement;
----V3------------ not working ------------
statement := 'INSERT INTO FILMYARNOLD (FIL_ID, FIL_NAME, FIL_YEAR, FIL_ACTOR, FIL_TEXTT) VALUES ( ';
statement := statement||vfilmiczki(1)||','||vfilmiczki(2)||','||vfilmiczki(3)||','||vfilmiczki(4)||','||vfilmiczki(5)||' )';
EXECUTE IMMEDIATE statement;
/* statement := 'INSERT INTO FILMYARNOLD VALUES (:jeden, :dwa, :trzy, :cztery, :piec)';
EXECUTE IMMEDIATE statement
USING vfilmiczki(1)
, vfilmiczki(2)
, vfilmiczki(3)
, vfilmiczki(4)
, vfilmiczki(5); */
statement := 'INSERT INTO FILMYARNOLD VALUES ('; --(:jeden, :dwa, :trzy, :cztery, :piec)';
FOR i IN 1..vfilmiczki.COUNT
LOOP
IF i = vfilmiczki.LAST THEN
statement := statement||vfilmiczki(i)||' )';
ELSE
statement := statement||vfilmiczki(i)||', ';
END IF;
--DBMS_OUTPUT.PUT_LINE (vfilmiczki(i));
END LOOP;
EXECUTE IMMEDIATE statement;
--INSERT INTO FILMYARNOLD
--VALUES (vfilmiczki(vfilmiczki.FIRST),vfilmiczki(2),vfilmiczki(3),
--vfilmiczki(4), vfilmiczki(5));
--DBMS_OUTPUT.PUT_LINE ('*****************');
--DBMS_OUTPUT.PUT_LINE (vfilmiczki((vfilmiczki.LAST)));
END;
/Im waiting for your replys
greetingsHi,
change V2 to:
STATEMENT := 'INSERT INTO FILMYARNOLD (FIL_ID, FIL_NAME) VALUES ( ';
STATEMENT := STATEMENT||VFILMICZKI(1)||','''||VFILMICZKI(2)||''' )';
EXECUTE IMMEDIATE statement;and V3 to:
----V3------------ not working ------------
STATEMENT := 'INSERT INTO FILMYARNOLD (FIL_ID, FIL_NAME, FIL_YEAR, FIL_ACTOR, FIL_TEXTT) VALUES ( ';
STATEMENT := STATEMENT||VFILMICZKI(1)||','''||VFILMICZKI(2)||''','||VFILMICZKI(3)
||','''||VFILMICZKI(4)||''','''||VFILMICZKI(5)||''' )';
EXECUTE IMMEDIATE statement;EXECUTE IMMEDIATE statement;One general remark: INSERT can be used directly in PL/SQL, you don't need to bother with dynamic SQL,
and the direct SQL will be probably more efficient than dynamic SQL.
Try this:
SET SERVEROUTPUT ON
DECLARE
TYPE FIL_TABLE IS TABLE OF VARCHAR2 (256);
vfilmiczki FIL_TABLE := fil_table();
statement VARCHAR2 (2048);
BEGIN
vfilmiczki.EXTEND;
vfilmiczki(1) := '77804';
vfilmiczki.EXTEND;
vfilmiczki(2) := 'Predator';
vfilmiczki.EXTEND;
vfilmiczki(3) := '1984';
vfilmiczki.EXTEND;
vfilmiczki(4) := 'Arnold';
vfilmiczki.EXTEND;
vfilmiczki(5) := 'get to the choppa';
-------V1------------working-----------------
INSERT INTO FILMYARNOLD (FIL_ID) VALUES ( VFILMICZKI(1) );
--------V2-------------------- not working -----------------------------------------
INSERT INTO FILMYARNOLD (FIL_ID, FIL_NAME) VALUES ( VFILMICZKI(1),VFILMICZKI(2));
----V3------------ not working ------------
INSERT INTO FILMYARNOLD (FIL_ID, FIL_NAME, FIL_YEAR, FIL_ACTOR, FIL_TEXTT)
VALUES ( VFILMICZKI(1), VFILMICZKI(2), VFILMICZKI(3), VFILMICZKI(4), VFILMICZKI(5));
END;
/
Maybe you are looking for
-
Mapped network drive appears empty for all users on one computer
We have several network drives mapped via a batch file at log in. On one particular Windows 7 computer one of these drives maps but appears empty. Manually mapping to the drive and assigning a different drive letter makes no difference but manually
-
All my files are in C:\tomcat-4.1.24\webapps\ROOT\security, and I have a test.jsp in that same directory together with my package xmlHandler (in a folder xmlHandler) which contains DOMUtil.class ... It seems that I have a problem with this line in my
-
Payment Batch Not Working..
Hi all, out of 802 payments which have equal Due Date, Pay Group, Payment Method ( at header and payment schedule level) bank ( all bank related information) every thing match in this 802 invoices. where in 800 got paid and 2 were left out. can you p
-
Let`s talk!
-
I am trying to install adobe 11.3 and adobe keeps quitting
I am trying to install adobe 11.3 and adobe keeps unexpectantly quitting before the install is complete.