Screen getting disabled on pressing enter only

Hi All,
I have a module pool program, in which i am editing some fields on screen. Without any change change done if i press enter the screen gets disabled. As per logic it should happen on pressing save button only.
Any suugestions.
Thanks & Regards,
Nidhi Kothiyal

Hi
I think you are using loop at screen in PBO.
change it like this.
case ok_code.
when 'SAVE'.
loop at screen.
screen-input = 0.
modify screen.
endloop.
endcase.
Try to Clear the OK_CODE when you feel you dont need further.
Cheers
Ram

Similar Messages

Fb60 WHT screen get disable

In Fb60 WHT screen get disable even i already make the setting in vendor master for WHT liable how can I make enable the WHT Screen

Hi
I did like this:
I checked the GL account in the vendor (the reconciliation account).
I got the Field Status Group code: G019 (Other receivables/payables)
Go to t-code SM30 and change view V_T004F
Put the variant: 1000 > in my case
Change the Field status group G019 > field Taxes
>>> Withholding Tax Code >>> set as optional entry
>>> Withholding Tax Amounts >>> set as optional entry
With me work just fine
Regards
Arcturus

I phone home screen says disabled and emergency calls only as i have forgot passcode

i phone home screen says disabled and emergency calls only as i have forgot passcode
cannot reset through itunes
just keeps saying that it cannot be restored as there is a lock on it

Restore the device.
If "Find My iPhone" is activated on the device, wipe the device via iCloud.com and then restore it.

Data getting deleted from screen fields when I Press Enter

Hi Folks,
I have a serious Issue need to resolve it urgently. I have created a subscreen in PS Module
Prog: SAPLXCN1(Subscreen)
Screen: 0600.
Enhancement: CNEX0006.
I have created a screen and populated the data via search helps, when I fill all the custom fields with values and press enter my data is getting deleted please give me quick solutiojn.
Thanks & Regards,
Ramcharan.

Hi RAM,
Check the Code where you are writning , (PBO or PAI)
After that check the sy-ucomm for Enter and write your code accordingly,,.
Thanks & regards,
Dileep.C

Screen getting disabled

Hi all,
i have a screen field of type date (it is a custom field on VA02) transaction ,
now when i click F4(input help) on the that field , then i get the Calendar getting blank ( only screen is appearing no values filled in it).
what could be the problem, before that i am playing with some of the screen fields
Thanks in Advance
Kishore Kumar Yerra.

Hi Kishore
As per my understanding, there is a custom field for date in Sales Order screen and it doesnt display you the dates on F4 Help.
As this is a custom field, please check the data type included for the same in Sales Order Tables: VBAK, VBAP...
Please check if the field is decalred with Built-In Datatype or with reference to a data element.
If itz with Built-In data type, please make sure that it is of type <b>DATS</b>.
If itz reference with a dataelement, try by changing to a different dataelement.
Kind Regards
Eswar

TS3048 my screen has frozen on problem loading page, my wireless mouse does not connect to the screen (its got new batteries). the keyboard works when you press enter.

My mouse (new batteries and wireless), does not connect to my screen on my mac. The screen responds when I press enter, but I cannot move around it as there is no mouse. The screen has frozen on 'problem loading page'.

My mouse (new batteries and wireless), does not connect to my screen on my mac. The screen responds when I press enter, but I cannot move around it as there is no mouse. The screen has frozen on 'problem loading page'.

For a call screen when displaying error message screen become disable

Hi,
For a call screen when i am giving a error message all the other fields are getting disabled and by enter also they are not getting enabled.
can you please suggest how to get this in enable mode with the error message.
the error message is given if we are trying to save the duplicate record.
Please suggest <removed by moderator>.
BR,
Rajesh
Edited by: Thomas Zloch on Nov 18, 2010 4:18 PM - priority normalized

Try:
message 'blabla' type 'S' DISPLAY LIKE 'E'.
Edit.
But you should validate the key fields before even pressing the SAVE button. Use CHAIN..ENDCHAIN for the key fields.

HT4623 I updated my ipad to iOS 6 yesterday and it worked immediately after update. I left home for about 4 hours and when I returned I was uable to get my ipad to come up. I only have a black screen. When I press the on off button nothing happens.

I updated my ipad to iOS 6 yesterday and it worked immediately after updating my ipad worked as it should. I left and came back in about 4 hours and have a black screen. When I press the on off button nothing happens. Help.

Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep/on/off and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Module pool screen field should default without pressing enter

Hi
I have got a main module pool screen which has a tabstrip with four tabs.
There are 2 fields in the main screen when we select from F4 for the first field then the field 2 should default in case of a condition.
This happens only when i press enter. I want the second field to change as soon as the first field is selected.
How do I trigger the PAI as soon as the field 1 is selected.
eg:                           Field 1 : i/p
                                Field 2 : display
                               Field 3 : i/p
On F4 for field 1 say i select value 'A' then the valu for field 3 should default to value 'B'. Also field 2 should be displayed based on combination of field 1 and field 2. But now it does it only on pressing enter.
How do I solve this problem?Also if i select field 1 value A and dont press enter and go to the subscreen tab then it does not do any thing. It allows to go on the subscreen tab. But actually it should default the field 3 value. It does it only when I press enter.
Also the F4 is from dictionary that is the screen fields are from dictionary. I have not created any F4 for the fields.
Please help me solve this problem
Regards,
mozila

Hi
You can achieve this using List Box only not by Input Field. Since Input field doesn't trigger automatic PAI/PBO
Go through the below thread
populate drop down menu based on entry in another field
or an alternative is--> In PBO use POPUP_GET_VALUES Fm to get the First input field based on that you can enter further values
unicode error
Cheerz
Ram

I can't put numbers on the decimals. It only allow ,00 as decimals. If i put 33.00 it's ok but i i put 33.44 when i press enter changes to 3344 as an entire number, i've try everything and can't find the solution. This should be a basic thing.

I can't put numbers on the decimals. It only allow ,00 as decimals. If i put 33.00 it's ok but if i put 33.44 when i press enter changes to 3344 as an entire number, i've try everything and i can't find the solution. This should be a basic thing. How frustrating !!

pedrofromsydney wrote:
€ 55,555.00
that's the result i get. Still why can't i just type for ex. 29.55 and stay like that on the cell ? Why does it always change to 2955 or 2955.00. ??
I don't understand this
It appears you have the cell formatted to Currency, with the default two decimal places.
What I don't understand, though is how Numbers arrived at a result of fifty five thousand five hundred fifty five on your entering the exact keystrokes in Yvan's post:
an equals sign, followed by five ones, followed by a forward slash, followed by a 2.
Here's the result I get:
Could you do the following:
Open a NEW Numbers document using the Blank template.
Drag the Row and Column control (bottom right corner) to reduce the table to two columns and three rows.
Enter the words "My table" in cell A1.
Click on cell B2 to select it, then enter the formula
=11111/5
Use only those eight keystrokes; do not include any commas, periods or other characters not shown.
Click on B2 again to select it.
Open the inspector and choose the Cell Format button.
Do not make any changes in the Inspector window.
Drag the Inspector window to the position shown in my screen shot.
Take a screen shot that includes the Formula bar, the Table (with cell B2 selected) and the Cell Format Inspector pane (the same screen area as in my screen shot above).
Post the screen shot in a reply to this post.
I'm hoping there will be some clues as to what's happening here in the screen shot. Procedure for taking and posting a shot of part of the screen follows.
Regards,
Barry
SCREEN SHOTS (Selected area)
Place the mouse pointer at the top left corner of the area you want to include.
Press shift-command-4.
The mouse pointer will change to a plus sign on a circle.
Hold down the mouse button and drag to the bottom right corner of the area you wan to capture.
Release the mouse button.
The screen shot will be saved to your desktop with the name "Picture 1" (The number will be different if you have taken other screen shots).
POSTING
In the Compose frame, place the Insertion point at the location you want the picture to be inserted.
Click the camera icon above the compose frame to open the Insert Image dialogue.
Click Choose file to open the Choose dialogue.
If necessary, navigate to the Desktop and click on the 'by date column header to sort the files by date, most recent at the top.
Select the most recent picture file.
Click Choose.
Wait for the picture's file name to appear beside Choose file.
Click insert image.
Done.
B.

New iPhone6...Get screen that says need to enter PASSCODE to reactivate thumb on button access feat;tyre. Do not know PASSCODE. Who to call, please? Thanks.

New iPhone6 ... Get screen that says need to enter PASSCODE to unlock so can use finger print on button for access, but do not know my PASSCODE. Who to call, please? Thanks.

During the activation process you were asked to set up a passcode. If you say no, it pops up a small notice, "are you sure you don't want a passcode, recommended". Do you remember entering a code?
if not, the only option is to restore the phone with iTunes And start over.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

You can take some of the steps here, #4, #5 or even trying a #18
Step by Step to fix your Mac
but I suspect your going to first have to create a data recovery drive
Create a data recovery, undelete boot drive
to get your data off the machine,
then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
Step by Step to fix your Mac

Why does firefox 16.0.1 not allow me to click on buttons in the top 40mm below the banners, though i can get to them by tabbing to a buttons then press "Enter"?

It doesn't matter what web-page I'm on, the top 40mm or so of the screen is a dead area for clicking on buttons or links. e.g. in Google I can click on a link lower down the page and get transferred to the new article - but if I were to move the item up nearer the top of the page the link would no longer operate.
I can move to a link by repeated operation of the "Tab" key until the link or button is indicated, and then press "Enter" to use the link, but this is potentially very time-consuming if there are a lot of links on the page.
I'm using a Toshiba Satellite L750 loaded with Windows 7, and Firefox 16.0.

Problems with buttons and links at the top of the page not working can be caused by an extension like the Yahoo! Toolbar or a Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode

HT2513 How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled".

How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"

Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz

Screen exit Payment document saved when press enter after error message

Hi All,
I have created a screen enhancement for payment document WZR1.its in additional data tab under header details.
Here i should populate a error message when user save the payment document without entering values to custom screen fields.It works fine with Function exit LWZRE017 . It populated the msg and the screen is disabled but after when i press enter button the document is saved and created.
please let me know how to stop saving the document without entering values in custom fields.
Thanks,
Arun kumaran.
Edited by: Arun Kumaran on Mar 4, 2010 12:09 PM
Edited by: Arun Kumaran on Mar 4, 2010 3:26 PM
Edited by: Arun Kumaran on Mar 4, 2010 3:43 PM

I found the fcode when enter is 'ENT1' it is from standard screen program.
I populated the same message when UCOMM = 'ENT1' still not working.
ARUN KUMARAN.
Edited by: Arun Kumaran on Mar 5, 2010 1:36 PM
Edited by: Arun Kumaran on Mar 5, 2010 2:11 PM

Screen getting disabled on pressing enter only

Similar Messages

Maybe you are looking for