Screen Share for Brand New Mini Server

Hello all,
just unpacked the brand new Mac Mini Server and don't know what to do. We all work on laptops in my studio so have no keyboards to use with the thing. I haven't turned it on yet, but is there a way to immediately go into remote screen sharing so I can configure it etc? Thanks for any tips that keep me from having to go dig up a keyboard!

Hi
Do you see an option to Screen Share on a client mac?
With the MacMini there should be two disks. One of them is for installing the Server Administration applications. Install these on a client mac - must be 10.6. Once installed launch Server Admin. Switch on your MacMini and connect it to the network. Good idea to have DHCP running somewhere. Presumably whatever you're using for your Router/Firewall? Make a note of the MacMini's Serial Number (first 8 characters) Launch Server Admin and dismiss the authentication prompt. Select "Set Up Remote Server" from the Server Admin Menu.
It should be fairly obvious from there - hopefully?
HTH?
Tony

Similar Messages

SSD for new Mini Server?

Hi, guys!
First time poster here
I would like to know your opinion on the following:
I am planning to go for a new Mini Server and run it in pair with an external Thunderbolt RAID storage. All shared data will be stored on the external RAID, while the internal Mini's disk will be used for running OS, storing account data and running basic services like File Sharing, Print Sharing and VPN. The question is: will I benefit from replacing the default 7200 HDDs with an SSD?
Of course, the machine will start faster and generally run smoother, but I don't really care about that as I will hardly ever see its interface after the setup is done. I am interested in whether SSD will contribute to increasing speed when my users will access their data (stored on the external RAID)? The access chain is as follows: Client computer - LAN - Mini Server (with HDD or SSD) - Thunderbolt connection - RAID.
Another question that bothers me is redundancy, of course. With 2 HDDs I would make a RAID 1 massive to provide for user account data redundancy. To achieve the same goal with SSD I would need to add a second one, which is getting quite expensive, frankly speaking But this is a completely different issue, I guess.
Would greatly appreciate any feedback.

I'm unsure of the proper procedure as I'm not experienced dealing with Fusion Drive setups. If Disk Utility shows you have a 1.5 TB drive, then what do you see when you boot the computer and check disk drive space using Get Info? I know you can revert the volume you have back to standard format if you don't mind using the Terminal in your Utilities folder:
Open the Terminal and paste or enter the following at the prompt:
diskutil list
Press RETURN. This will list for you the device information for your HDD. Here is an example of the output:
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *120.0 GB   disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS Yosemite                119.2 GB   disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
You want what you see at the top left - /dev/diskn, where n is the integer number. Then enter or paste at the prompt:
sudo diskutil cs revert /dev/diskn ; replace the n with the integer number found above.
Press RETURN and enter your admin password when prompted. It will not echo to the screen, so be careful typing. Press RETURN again. Wait until it completes the process which is when the prompt returns.
Given the potential danger when using the Terminal in this way, please be sure you have first made a reliable backup. Better safe than sorry.

I am running Mac OS X Lion on a brand new Mini. Every now and then, my keyboard goes "dead." The mouse still works but can't type. If I restart, everything is fine again. Is there anything that will fix this problem?

I am running Mac OS X Lion on a brand new Mini. Every now and then, my keyboard goes "dead." The mouse still works but I can't type. If I restart, everything is fine again. Is there anything that will fix this problem?
Also, I am trying to connect my Mini from the mini-Displayport to the Displayport of my Dell U2410 monitor. The image is very grainy,even though it is set to the correct resolution: 1920 X 1200 at 60Hz. If I use HDMI to VGA input, the image is much clearer. Is there a way to get the Displayport to work?

I'm having exactly the same keyboard issue. Certainly nothing has ever enhanced my concentration while coding like suddenly becoming unable to type.
I'm seeing a great many devicemgr and rake errors in my system log. I don't know if they're related. How 'bout you?
If you're unfamiliar with the system log…
Open /Applications/Utilities/Console.
If necessary, choose View > Show Log List.
system.log is at the top of the FILES section.
Try searching it for hot words like DEBUG, FATAL, and aborted.
I've found some discussions that would tend to indicate my errors are postGres related – I'm running OS X server.
-Bryan

Brand New Mini - Can't Migrate from Old

OK, Santa brought a brand new mini to replace my trusty 2007 mini. I fired it up and tried to use migration assistant to migrate from the 2007. First I tried it via network. It got to the screen where it showed the old mini as the source but then just sat there with the buzz saw spinning and 'looking for other computers'. I don't understand why it was still looking...it had found the one that it needed. So I plug my Time Machine disk into it. It gets to about the same point...shows the disk and the buzz saw and the 'looking for other computers' message. Why is it looking for other computer? I rebooted and it finally recognized the Time Machine disk and I selected what I wanted to migrate and it went on its merry way while we had dinner. I come back a couple hours later and it says 'copying system info...about a minute left' or something close. I left it there for about an hour and finally shut it down & restarted. It then went to the gray screen with the apple and the buzz saw and hung there for about an hour. I tried a few more times and then booted into the Utilities screen and am in the process of re-installng Lion. I'm not happy. Any idea what the problems were/are? I hope I can get it working after all this. Did I mention that I'm not happy?

See:
How to use Migration Assistant to transfer files from another Mac
Migration Assistant tips and tricks
OS X Lion- How to use Migration Assistant to transfer files from another Mac

Cannot screen share or connect to update server.

I have a MBP and I'm having problems. My laptop connected to the wifi, i have internet and it works. Up until yesterday i could screen share with my mac mini but all of the sudden its stopped working, it also won't allow me to connect to the software update server, if i connect to my neighbours (legally) it connects to the update server but at home it wont, i have tried turning of my router but it still doesnt work. I have anothe MBP in the house that can do all of the listed functions, its just this one laptop.
Thanks,
Ben

Just thought I would give this a bump. I recently transferred over to a new computer (I did not import/migrate settings, I reentered them. No longer can I VPN into work. Running 10.5.7 I have entered in the correct DNS settings and the domain. No errors, it says I am connected but I cannot contact any servers or file share. Any thoughts?

I have a brand new mini mac and a new apple TV. Both have been updated and can see my movies in itunes. I can use Netflix and stream music. I have tried to use my old laptop and it streams video fine. But my new computer only see a spinning circle.

I have a brand new mini mac and a new apple TV. Both have been updated and can see my movies in itunes. I can use Netflix and stream music. I have tried to use my old laptop and it streams video fine. But my new computer only see a spinning circle.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

Error message: Volume "Macintosh HD is full" on brand new mini

Hi,
Just installed Logic X on a brand new Mini 2.6Ghz, 256 ss HD, 16 gigs Ram. This is a dedicated machine for music so there is really no other major programs installed. I have almost 200 gigs of free HD space. I am using 2 interfaces as an agregate device for a total of 20 i/o. One is a MOTU 896MK3 and the other is an Audiofire Echo which is the master clock. The connection is Firewire 400 and I'm recording at 44.1 to the same internal HD. I also optimized my computer settings by turning off indexing and time machine.
On this project I have about 12 tracks of live drums enabled which I can record with no problem but when I try to play the tracks back after about 30 seconds in it stops and I get this error message: Volume "Macintosh HD is full" . The session has no software instruments at this time and I have no plugins on the tracks yet. When I look at my CPU load it's very low as would be expected and I have a ton of HD space. This computer is literally 2 days old. I am monitoring the individual tracks back through the interfaces into the returns on my analog mixer channels. I should also say that I had similar issues trying to run this setup on an older macbook pro which had a lot of software installed on it and is not a robust, I thought that upgrading to a newer faster machine would be the way to go. I am suspecting that my agregate interface setup could be a week link but getting an HD error message doesn't make any sense to me. Any suggestions would be much appreciated.

Please read this thread...
http://superuser.com/questions/682465/mac-hard-drive-full-message-when-its-not
Its normally caused by a disk data problem ..... and the solution in this thread usually fixes it...
if this doesnt fix it.. try rebuilding your Spotlight indexes.... as Spotlight is what Logic uses to track everything on disk.... so it could be a corrected index that is at the root of your problem.
http://osxdaily.com/2012/01/17/rebuild-spotlight-index/

TS2972 I have an old computer that died, how do I turn off home sharing on that computer so that I can gain back 1 of my 5 shares for my new computer?

I have an old computer that died, how do I turn off home sharing on that computer so that I can gain back 1 of my 5 shares for my new computer?

As far as I know you don't need to turn off home sharing as such, however you will have lost one of the 5 "authorizations". You can't release these individually unless you are running iTunes on the authorized operating system you want to deauthorize.
You will have to wait until you have 5 authorizations, at which point you can clear them all and start over, reauthorizing the machines you want to.
iTunes Store: About authorization and deauthorization
tt2

ODI 11g 11.1.1.7 with Win64 bit OS : Starange problem : Right click does not work for Create new data server in Topology.

ODI 11g 11.1.1.7 with Win64 bit OS : Strange problem : Right click does not work for Create new data server in Topology.
On right click nothing happens at all. I have reinstall the ODI multiple times with right installer. issue persist.
Please help.

Hi,
Did you use the generic installer or the win32 one ? You should use the former with Win64.
You can also check that your version of Java is supported in the certification matrix.
Regards,
JeromeFr

Hello, I just wanted to know when an update would be available for my mac mini server os x lion to resolve the issues regarding my m-audio fastrack pro usb audio interface (no midi messages recognized)

Hello, I just wanted to know when an update would be available for my mac mini server os x lion to resolve the issues regarding my m-audio fastrack pro usb audio interface (no midi messages recognized)

Have you reported your problems to Apple?
BugReporter
<http://bugreporter.apple.com>
Free ADC (Apple Developer Connection) account needed for BugReporter.
Anyone can get a free account at:
<http://developer.apple.com/programs/register/>
And/Or
Mac OS X Feedback<http://www.apple.com/feedback/macosx.html>

After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"

After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"
The system logs reads:
Mar 29 22:06:25 server servermgrd[82]: servermgr_web: Error Domain=XSServerFoundationErrorDomain Code=4 "Failed to read settings: Exception:
          undefined method `downcase' for nil:NilClass
          ." UserInfo=0x7fc547901080 {NSLocalizedDescription=Failed to read settings: Exception:
          undefined method `downcase' for nil:NilClass

To check the local network for some of the common configuration problems, launch Terminal.app and issue the following diagnostic command:
sudo changeip -checkhostname
That'll report some local configuration information and then either no errors detected and no changes required, or it'll point to whatever configuration errors or issues it might detect. That doesn't catch everything, but it catches the common errors.
FWIW, 192.168.0.0/24 and 192.168.1.0/24 are poor choices for the local network, as VPNs are based on IP routing and IP routing gets tangled when the same subnet is used on both ends of the VPN. 192.168.0.0/24 and 192.168.1.0/24 are near ubiquitous in home networks and coffee shops.

Imac screen has colored lines running down the middle of the screen - time for a new imac?

imac screen has colored lines running down the middle of the screen - time for a new imac?

Is this a G5 iMac?

Snow Leopard Server on brand new Mini; Gray screen

I installed Snow Leopard Server on a new Mini. The install went fine. Shut the mini down. Started it up about 24 hours later, and I get to the gray screen and that's it.
I exchanged the mini for a new one. Installed Snow Leopard Server on the new one. Install went fine. Ran updates. Restarted the mini several times with no problem. Shut it down, waited 24 hours, and now it's the gray screen again.
Now what?

There's a huge thread on this (client, not server, but same concept) which you can find here.
https://discussions.apple.com/thread/3209335?tstart=30

HT1438 Can I return for brand new iPad mini?

I would like to return my 32GB iPad mini. It's brand new, unused, still in the box, never even turned on. But, i've lost the receipt for it. Can I still return it for a refund.

If you purchased it at an Apple Store the date of sale was recorded via their Point of Sale System.
You can check yourself by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do

How can I use screen share of my mac mini? Problems validating

I recently purchased a mac mini to act as my home media server for audio as my airport express was not playing nicely with my Peachtree DAC. Anyway, I have set up sharing on the mac mini and can't figure out how to connect from my wife's Macbook, or her iPad. (I use a PC, so would welcome advice if available on how to connect across platforms as well.) My goal is to set up the mac mini without a monitor or keyboard connected to it and have it sit with our main stereo.
I am able to connect to the mac mini via my wife's macbook IF I ask for permission and I grant it from the mac mini. However, I am unable to connect no matter what I try if I try to log in as a registered user. I have tried to add her as a user to the mac mini, I have tried to log in as a guest, and I have tried to log in with a password but no matter what I try, I get an authentication error when I try to log in as an authorized user. For more clarity, here is what I have tried:
1. Added authorized users on the mac mini. I created a user name for "jeff", "maureen", and "lastname_maureen" on the mac mini and provided a password for each user. "jeff" and "maureen" are just created on the mac mini, and "lastname_maureen" is the user name of my wife's computer. I confirmed the passwords, and still am unable to connect. I have allowed any user on the network to access screen share, and no matter what I do I get an authentication error. Again, if I attempt to log in from my wife's computer by asking permission, it works fine but I can't figure out how to set up an account to login. Please help. Thanks!

Have you tried connecting one to the HDMI output, and another to the Thunderbolt port (with the appropriate Mini DisplayPort-to-other connection adapter as needed)?

Screen Share for Brand New Mini Server

Similar Messages

Maybe you are looking for