Snow Leopard Server on brand new Mini; Gray screen

I installed Snow Leopard Server on a new Mini. The install went fine. Shut the mini down. Started it up about 24 hours later, and I get to the gray screen and that's it.
I exchanged the mini for a new one. Installed Snow Leopard Server on the new one. Install went fine. Ran updates. Restarted the mini several times with no problem. Shut it down, waited 24 hours, and now it's the gray screen again.
Now what?

There's a huge thread on this (client, not server, but same concept) which you can find here.
https://discussions.apple.com/thread/3209335?tstart=30

Similar Messages

  • How do I reinstall Snow Leopard Server on a Mac Mini Server 2010?

    How do I reinstall Snow Leopard Server on a Mac Mini Server 2010? I have already attached a Mac Superdrive and tried to download, but the buttons at the bottom of the dialog screen are greyed out.

    Not sure where you're getting tangled here or how much you know about OS X Server 10.6, so...
    AFAIK, Snow Leopard Server wasm't available as a download, it was a separate DVD distribution. 
    Unlike more recent versions of OS X Server, the 10.6 server distributions were usually standalone DVD disks, as well. 
    (There is a slight wrinkle if your Mac needs a newer version of 10.6 than your server distribution; there was a different streaming upgrade process for that.  IIRC, the appropriate OS X client version was installed first, then you booted that client version and loaded the DVD and installed OS X Server.)
    But if you have a Snow Leopard Server distribution that supports your particular Mac Mini model, then boot the DVD, use Disk Utility from the Utilities menu in the bootable DVD environment, wipe the disk, and then install OS X Server.
    You'll need a 10.6 license key, if you don't already have that.
    FWIW, here are the available manuals.

  • Reinstalling apple's snow leopard server on a mac mini

    Hello,
    I need to reinstall snow leopard server on the mac mini (the one without the dvd drive), and I bought an external dvd drive. How do I get the mini to recognize the external? I can't seem to get that option.
    Thanks.
    Ted

    Plug the drive in and when you power up the mini, hold the c button on the computer keyboard while it boots with the restore disk in the dvd drive. After a minute or two, the computer will start from the dvd.

  • Can I install a version of snow leopard server on a newer Mac Mini model?

    Hi-
    I have Snow Leopard server running on a Mac Mini from 2010. I decided I really need some redundancy so want to get another and sync them in case of failure. Can I buy the latest Mac Mini model and install Snow Leopard server on it or will it not let me due to some firmware limitation? I've been able to do revert on other models and not others. Any thoughts?
    Thanks.

    ****-So I have to find the latest Mac Mini that will run Snow Leopard Server? I refuse to upgrade to that crap they call server nowadays. It's Snow Leopard server till I move to Linux. Thing is, those Minis cost nearly as much now as they did when brand new. I feel like I'm getting ripped off. Oh well. Thanks for the quick answer guys!

  • Can I install Snow leopard server on the new Mac Mini Lion server?

    Hi guys, I purchased a Lion Server and I am wondering if its possible to install Snow Leopard server on it.
    I have the Snow Leopard Server install discs and everything , just wondering if there is any thing I should take note of, I personally prefer SLS over Lion.
    What do you guys think?

    There's a huge thread on this (client, not server, but same concept) which you can find here.
    https://discussions.apple.com/thread/3209335?tstart=30

  • Please HELP!! MacBook stuck on "Select your Keyboard" screen after installing Snow Leopard on a brand new hard drive!

    Hello, I just recently replaced my internal hard drive in my MacBook [from a 250gb to a blank/empty 750gb]. I managed to get OS X Snow Leopard installed with the DVD. Setup seems to run fine at first, I get the screen in space with the welcome message different languages while music plays. Then I'm asked to select my country, then here is my problem- the next screen asks me to "Select Your Keyboard", I select & click "Continue" button, then my Mac is just showing the spinning beachball & it stayed that way all night =( I don't know how to fix this. Anyone experience this or have any solutions for me? I'd appreciate any help! Thank you! [I've been googling since yesterday with no luck on finding an answer].

    It's diagnostic software. It's supposed to help you find problems. I don't think anyone is making any software yet that fixes hardware problems.
    That said, the two comments:
    Le husky wrote:
    Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive....
    .....also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost....
    would lead me to think it's the logic board. On older MacBook Pro's both the USB I/O ports and the keyboard/trackpad are fed out of an integrated USB controller integrated into the South Bridge I/O controller. On newer models, the USB ports come out of an integrated North/South bridge controller and the keyboard/trackpad are handled by an SMC controller, which itself interfaces with the I/O controller. All of these items are on the logic board, and they're all unrepairable.
    ...unless of course the "internal drive [that] is installed in a cheap external case" is itself causing the problems. Another thing to try might be a different USB port, if you haven't done so already.
    I didn't know the price for Scannerz went up. I could have sworn I only paid 30-some bucks for it. Maybe it was on sale at the time. I don't remember.
    In any case, good luck.

  • I can't install Snow Leopard on a brand new hard drive with a brand new optical drive.

    I need help please. I have a 2009 MacBook Pro. The hard drive crashed a while back so I bought a new one. The original Snow Leopard disc that came with it was scratched so I bought a new one of it as well. After trying/failing to install Snow Leopard on the new hard drive about a dozen times I bought a new optical drive as well. I installed the new optical drive today, tried to install Snow Leopard again and STILL got the same installation error messages. Any help that anyone might be able to provide would be greatly appreciated.
    Last error message:
    Install failed: The Installer could not copy the necessary support files.

    Did you partition and format the new drive first?
    Drive Partition and Format
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. Upon completion quit Disk Utility and return to the installer. Complete the Snow Leopard installation.

  • Can i run snow leopard on my brand new iMac i5?

    I just bought a new iMac Core i5 – and it's lovely – but it comes with Lion pre-installed and half my applications no longer run (Logic Express, Photoshop, etc). Can I install Leopard or Snow Leopard to continue to use my old apps, or will I have to upgrade everything?

    Hi:
    Partitioning an internal HD is not a very good idea (IMHO).  At a minimum you waste resources and also partially defeat OS X's system management.
    You might wish to consider running one OS X from an external HD - although that would confuse me for sure
    Barry
    P.S.  I only had one thing that would not run (permanently) under OS X 10.7.  That was an old copy of Office (2004).  I decided to not upgrade but to switch to iWork instead.

  • Unable to install Snow Leopard to a brand new Macbook Pro

    I have a new MB Pro that I'm unable to install 10.6.3 onto. This is a machine I got for work, and it has a corporate image on it. I thought I'd be able to create an additional partition on the hard drive and do a fresh install of 10.6.3 on it.
    If I just put the disc in and boot, holding down <option>, then I can choose the Mac OS Install Disc. However, after a few minutes, the DVD spins down and the machine just sits there.
    If I boot into the existing partition, and run the installer from there, I can point it to the new partition and it starts installing. However, with around 36 minutes left, the machine reboots, and ends up sitting on the grey screen with the Apple logo. Again, I can hear the DVD drive spin down.
    I tried this with 10.6.0 discs as well, but since this is a brand new machine I realized that it would probably need 10.6.3. Unfortunately, even that isn't working.
    Is it possible that our IT department has done something that would prevent me from booting off of install media?
    Thanks for any help...

    It sounds like your computer is trying to use the install disk and is having some issues reading it.
    Your IT department may have put a firmware password on the computer (http://support.apple.com/kb/HT1352) but I don't think this is the case as you are able to use the option key to enter the start up manager and select an install disk an start the boot process.
    It might be time saving to just ask your IT department if there is something about the computer's setup that prevents you from booting to an Install disk. A basic task that many users want to accomplish requires that ability, repairing the disk with the install disk: http://support.apple.com/kb/HT1782
    Make sure you are using the original install disk that came with the computer. If you are using the original Mac OS Install disk then check the disk in good lighting for scratches or smudges. A dirty or damaged disk may not respond like it should.
    Do you have an original Mac OS X 10.6 Retail Install disk? If so, try using the C key or option key with that disk. It should at least start up using that disk and eventually (1-5 minutes) bring you to the Language Selection screen. If it does then you have dirty or damaged install disk. Try cleaning the disk with a soft, clean, lint-free cotton cloth.
    Hope that helps.

  • How to enter hidden SSID in Snow Leopard Server

    I am re-installing Snow Leopard Server on a Mac Mini Server (2009) from the recovery disk.  I successfully installed, using Remote Installation.  However, it did not keep my network settings.  The SSID is hidden, so normally, I would select to enter "other network".  But, in this case, that option is not showing up. What am I missing?

    Airport was enabled; however, the network name box did not have an option to "Join Other Network". I was very surprised, because I had used Airport to remotely install the OS in the first place, and that box did have the "Join Other Network" option.
    I understand that sniffing tools, used by any network-savvy person, can easily find hidden networks. As a matter of fact, most newer network selection software distributed with network card drivers are able to find and display hidden SSIDs. I just like to use the most security I possibly can, and that's one tool at my disposal. Along with WPA2 and a strong key, the hidden SSID keeps my network out of sight and mind of the casual hacker who just wants to see what's out there to pick and poke at. They're most likely to hack at the easily displayed stuff and, hopefully, ignore what they can't see. Again, just one more tool - not the best, but not totally useless, either.

  • Setting up Snow Leopard Server with Address Book, iCal for Small Business

    Hello Folks,
    I have a small business with 2-3 people and I want to setup Snow Leopard Server on a Mac Mini. I have everything in place, RAID, Backup drive etc.
    What I need is a guide on how to setup the server correctly and how to setup Address Book Server, iCal Server, DNS, etc. I was in IT a long while back but have gone back to my creative roots and sworn off IT but I am in a situation where my IT guy's wife is pregnant so he is busy painting the baby's room, etc.
    I was looking at Snow Leopard Server for Dummies and a few other books. Do you guys have any suggestions on resources for me to read or research that would give me very straightforward steps in getting this setup. I am at a point where I can re-install from scratch if needed.
    For the ease of those that might respond let's assume I know my way around Mac and general networking as a whole.
    Thanks in advance for any advice.
    Cheers,
    Jason

    Hi Guys,
    First of, I will give you a brief background on me regarding networking as a mac user since 1994. I can setup and network multiple macs without a server in our home and small office. Turning file, print and internet sharing with a regular Mac OS X client version at no problem at all. This would be my first time setting up a Mac OS X Snow Leopard Server.
    I'm in the same boat as Jakekub but we do not have a static IP from our DSL provider. We just bought a Mac Mini Server for our small office with 3 iMacs and 1 MacBook. We will just use the server for internal usage and to centralized things out and use some of server's features like Address Book, Mail, iCal etc. I've search the forums and found Orhidy's post here:
    http://discussions.apple.com/thread.jspa?threadID=2148553
    I even followed the sample IP Address, Subnet Mask, Router, DNS Server and I think I had it correctly setup initially. And I think I got it all running on the basic setup base on his instructions. So I tried to test my DNS settings via Terminal > hostname then got answer as
    servername.companyname.private
    And double checking DNS again with a command: sudo changeip - checkhostname and was given an answer of:
    Primary address = 192.168.1.192
    Current Hostname = servername.companyname.private
    DNS Hostname = servername.companyname.private
    The names match. There is nothing to change
    dirserv:success = "success"
    But here's another one that bugs me. I tried to follow from "Mac OS X Snow Leopard for Dummies" the command line:
    NSLOOKUP hostname
    and got an answer of:
    ;; Got SERVFAIL reply from 192.168.1.192, trying next server
    Server: 192.168.1.1
    Address: 192.168.1.1#53
    ** server can't find hostname: NXDOMAIN
    So does it mean that I still haven't configured my server properly?
    Thank you all for the help in advance!
    dive

  • Lion server or Snow Leopard Server?

    From a quick check of postings here, my question of whether to use Lion Server or Snow Leopard server on a Mac Mini for a small office, looks to be "stay away from Lion server" Snow Leopard server just works and is easier to support.
    Most of these posts are from 2011, has anything changed where someone can say Lion is now a much better server choice now than considering Snow Leopard Server?
    It seems that most posters feel Lion server is a real step backwards, is this the case?
    Thanks in advance - Lewis

    Which services have been removed or depreicated?
    You have to bear in mind that 'removed' or 'deprecated' only really means 'no longer bundled and supported by Apple'. Just because Mac OS X Lion Server doesn't ship with a foobar server that doesn't mean you can't download and install your own foobar server. It just won't be integrated into the Server Admin apps.
    For example, Lion Server no longer ships MySQL Server. So download and install your own copy. It's not like the GUI apps gave you any control over the MySQL anyway, other than starting it up and controlling the network ports.
    Likewise for print server. Some of the advanced print features such as quotas have been removed from the GUI, but you can implement them yourself.
    Likewise with QuickTime Streaming Server, where the functionality is little more than a web service.
    What features that have been enhanced?
    Lion Server has simplified the setup of a server for small workgroups with simple requirements. If that's you then the whole experience may be enhanced since you're not swamped with a slew of options that you don't understand, or need.
    I think a lot of people were also stymied by Snow Leopard Server because they expected the GUI apps to cover all the options, which was never the case.
    So my original point stands. There is pretty much nothing you cannot do in Lion Server than you could do in Snow Leopard Server, it's just that it might not be supported by the GUI. Most serious server admins eschew Server Admin.app anyway since even Snow Leopard Server's admin app doesn't cover all the capabilities of some of the services, so you end up driving it via the command line anyway.

  • Snow Leopard server to Mavericks

    I have Snow Leopard server on a Mac Mini 1TB hard drive, 4GB memory. If I download Mavericks and install - will it work? Presumably if I wanted to keep it as a server I would have to install server separately? Any views as to  how well Mavericks will work on my setup?
    I am considering this because too many software packages I use a lot are now languishing and not updated
    Any thoughts gratefully received
    Martin

    Correct. First you have to download OS X Mavericks from the Mac App Store and install it, and after upgrading, purchase OS X Server from the Mac App Store.
    OS X Mavericks should work without any problem, but you should make a backup of your files with Time Machine and check that your applications are compatible > http://www.roaringapps.com

  • Does Snow Leopard Server come with a website design software

    I'm running Snow Leopard Server on my Mac Mini-We've decided to take our website in house, and have set it up on the server.  The site was created by someone for us and is in HTML files.  Is there software that came already on our server that will permit us to edit the files, or do we have to buy additional software?  I don't see iWeb on our server.  Thanks.

    iWeb works, but many sites will find it limiting (eg: no imports) or will outgrow it.
    The typical evolution is from static HTML web pages and CSS and such along to some sort of web content management system (CMS).  That might be home-grown, open-source, or commercial, and most of the CMS packages can be "themed" to present a particular appearance.  Static HTML doesn't scale, and gets fussy to manage.
    If static HTML is your chosen path, then Web (HTML) editors are widely available, and do get discussed here on occasion.  Some that are mentioned include Adobe Macromedia Dreamweaver, RapidWeaver, Webacappella, Freeway, etc.  (Google for details, reviews, trials, etc)
    Migrating your server in-house means maintaining the server and its security, keeping any CMS you pick current, and getting DNS and some other pieces in place, and run-of-the-mill stuff like regular backups and monitoring disk space, and dealing with the usual network and hardware errors.
    One of the other options (as differentiated from operating fully in-house) is to host your web site and related pieces on one of various hosting providers.   (That outsources a bunch of the "fun" here, and usually for little money.)

  • Moving accounts from Snow Leopard Macs to Mac mini with Snow Leopard Server

    I got my brand spanking new Mac mini today with Snow Leopard Server! So far, we (at home) were managing our accounts on individual iMacs and a MacBook Pro. While I will be getting into the innards of account migration, management etc. I thought I'd post a quick question here; Currently I have an iMac with three user accounts on it (wife and two kids). I also have my own personal MacBook Pro with my account (the only Admin account) on it. We'll soon be getting another iMac for our daughter (who currently has an account on the existing iMac). My idea in getting the Mac mini was to move to and centrally manage all the user accounts in the household on the Mac mini server. What is the best way to accomplish this? What is the best way to move the existing accounts on to the server?
    Additionally, I'll be looking into connecting the two stationary iMacs with Powerline Ethernet (where one runs Ethernet over existing electrical wires in the walls). My other option would be to rely on wireless network (I don't think this would be a good idea for if I am going to be placing the user accounts on the server and there needs to be a constant on, reliable connection between the server and the client computers as they will be talking to each other a lot!). Any thoughts on Powerline? (I am not looking forward to installing Ethernet cabling behind walls :o))
    What say the wise men of Mactopia?!
    Thanks,
    Kenneth.
    P.S. I had earlier accidentally posted this in the corresponding section of Mac OS X instead of the Mac OS X Server forum.

    Ok so the esiest way to explain this is to tell you what i just went through.
    I have 3 user accounts. All the accounts are network Users meaning that there home folder are kept on the server. I was having a problem with Time Machine giving me error 41 and error 11. After scratching my head for 2 days I ended up copying (Drag-n-Drop) the Home Folders to an External Hard Drive. I then proceeded to erase both of the internal hard drives on the mac mini and did a fresh local install of the Server OS.
    Everything was fine at that point. Now this is where Snow Leopard stopped being nice.
    I went and Created the user account again using WGM. I let WGW create the home folder and the 9 folder inside. I made sure the short names were the same and the passwords were the same as they were previously.
    However, once i Copied files from the external drive to the home folders the permissions copied as well, Which i guess should be expected. So now at this point apparently the UID's of the newly created users wasn't the same as they were before the clean install. I have multiple instances of root listed in the ACL for several folders and also had several instances of System listed sporadically.
    Now, This isn't to say that you can't drag n drop because now That I have it all squared away and everything is now working ok, I would probably still drag n drop the home folder off to an external disk, but only because I now know what to do to clean things up.
    if you drag and drop be sure to use the CHOWN command and theCHMOD commands afterwards. Take a look at this MacFixIt article: http://reviews.cnet.com/8301-13727_7-20013630-263.html?tag=mncol;title
    If you copy your local imac users to the home directory on the server you may want to follow the steps on the URL I gave plus you will most likely also have to do the following. In a nutshell you are going to use the chmod command to strip all the ACL Permissions then you are going to use the chown command to re-specify the correct owner and the correct permissions for the network user.
    !) Go into ServerAdmin and click on Sharing
    2) Go to the users folder you are using and select the user you are going to work with.
    3) Click on the Permissions option
    4) click on the +sign at the bottom (this will open the users & groups list to the right)
    5) Drag the current user from the users list to the owner permissions line under posix section
    5a) Click Save
    6) Click on the Gear button at the bottom
    7) Check the box for Owner Name and Owner Permissions.
    8) Uncheck the box for Access Control List then click ok
    Once you've gone through that rigmarole you can go back into ServerAdmin and fix the permissions for public and Sites folder which should only take a minute or so.
    So the moral of this story and as I found out when i ended up calling Enterprise support is that the act of dragging and dropping user home directories from one server to another, or as in your case, from a local machine to a the server isn't anything that apple recommends or supports. you might want to read through the man pages for "Ditto" or so apple tells me, but honestly now that you know, the steps above aren't all that bad. It's true Knowing IS half the battle!
    have Fun!
    P.S. FWIW If you run into problems and have to call Enterprise Support be prepared for them to tell you to refer to the user Guides. So reading those would be to your advantage even though they aren't the easiest things to understand unlike apple's consumer products user guides

Maybe you are looking for