Screensaver not finding pictures - it USED to, but doesn't now

I've used an album of photos for my screensaver for months and months without issue. The photos are in an album in iPhoto. However, this week, I inadvertently switched to a different screensaver. When I reselected my album for a pictures slideshow, the Screensaver utility said "no pictures found." I went into iPhoto, made sure the photos were there. Went back to Screensaver, selected the album, ran a test - yep, all's good. Closed iPhoto; closed the System Preferences window.
Now, when the screensaver starts, the screen's always black and it says "Looking for pictures...the selected source contains no pictures." WHAT GIVES?

It sounds like maybe you have a wired router and
added an Airport base (or other wireless router) for
wireless? If I've guessed wrong, please describe your
network and check whether the wired and wireless
computers are in the same subnet (that is, only the
last part of 192.168.1.x can be different, the first
three parts are the same on every computer).
The some of the wired computers go through a switch, but some go straight into the router (because they are closer to the wireless router than to wall jacks). This doesn't seem to affect my ability to see them on the network because I can't see any from my powerbook. Everything is on the same subnet and the only devices are the router and the switch, but I can't see stuff hooked directly to the router either.

Similar Messages

My mouse and trackpad arent responding the click on finder, i can use multitouch but not 1 touch. Aswell when i go to the findertab at the bottum with the mouse, app icons Does Not expand.

My trackpad is responding the click on finder, i can use multitouch but not leftclick/1 click/touch. Aswell when i go to the findertab at the bottom with the mouse, app icons Does Not expand. I had no problems with it before, but I'm very confused.

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

My ipad is not recocanize my iPod using Bluetooth,but both devices are recoconizing some other devices

My ipad is not recocanize my iPod using Bluetooth,but both devices are recoconizing some other devices

You have stated an issue, but you have not stated what you are trying to accomplish.
Repeating the same question and expecting a different answer is questionable.
Robert

Hello after the installation of new software iso 6.0 I can not find youtube any more. Where is it now? Thank you.

Hello after the installation of new software iso 6.0 I can not find youtube any more. Where is it now? Thank you.

The YouTube app is not included in iOS 6. You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google), or try accessing it via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)

Why do the Screensaver not show pictures from my Aperture Library?

Hello,
I have a new MacBook Retina and everything is fine, but the screensaver. When I choose a screensaver with photos (like Ken Burns) and an Aperture folder, the screensaver only shows "Fotos laden..." (German for "Loading pictures..."). When I choose the folder, I see all the pictures in the dialogue, but the saver itself don't shows them.
Using Aperture pictures for the desktop work by the way.
Any ideas? I already repaired (new database and stuff) the Aperture library, but it doen't helped.
One more hint: when I tried choosing an Aperture folder, the screensaver even don't work with the preinstalled pictures or normal picture folder on the HDD.
Thanks for helping me!
Volker

Connecting from one computer to another is one thing. The iTunes sharing feature is something completely different and is meant as a way for people to allow others to listen to their library from other computers on the same network that also run iTunes. It isn't meant as a direct connection from one iTunes library to another.
Think of it sort of like turning on the "Broadcast" or "Radio Station" feature of your iTunes to allow others to listen in on your library if they are interested. But you wouldn't want those people going in and making changes.
Patrick

Spotlight do not find pictures in iphoto 11

I have notised that Spotlight does not find the pictures in iphoto 11. I'm running Lion 10.7.2. Solutions?

Well, perhaps Spotlight doesn't understand the iPhoto database with the tags and stuff (which it did in older versions). But it does understand the file package. It's just a package of files and folders after all.
If I create a new iPhoto library and import a couple of pictures, then in the Finder show the new iPhoto library package content and search for "jpg" and click on "new iPhoto Library" it returns a lot of hits, since it's indeed full of jpg files. The problem is that if I do the exact same thing with the old iPhoto library package - it returns zero hits.
Does it have to do with the iPhoto library moving from one disk to another, migrating? I don't know the answer, but it's really irritating. And I'm hoping someone knows the magic trick out there to fix it once and for all.

Ejb error((MARSHAL) Could not find class) when using OneToMany relationship

I am using Netbeans 5.5 with J2EE App Server 9. I have two entity beans with a OneToMany Uni-directional relationship. I have a Remote Stateless session bean which has persistence operations for creating and searching etc.. I am accessing the remote bean via jndi from a j2ee java client. The access works fine. The session bean persist operation creates data in both the entities (cascade persist).
But, after the data is created, when I access the entity manager find() method from the session bean via the client errors out. This error only happens for the entities with OneToMany relationship, not for OneToOne relationships.
I am using TOPLINK persistence provider accessing a derby data source. I have the latest persistence library jar files in the library classpath.
client code:
            Phone p1 = new Phone();
            p1.setPnumber("999 999 9999");
            Customer c1 = new Customer();
            c1.setLname("Smith");
            c1.getPhone().add(p1);
            int pk = agent.createCustomer(c1);    // creates the entities
            Customer c2 = agent.findCustomer(pk);     // this causes the ERROR
session bean code:
   @PersistenceContext private EntityManager em;
    public int createCustomer(Customer c) {
        em.persist(c);
        return c.getId();
    public Customer findCustomer(int i) {          // this causes the ERROR
        return em.find(Customer.class, i);
exception:
Mar 30, 2007 3:25:00 PM com.sun.corba.ee.impl.encoding.CDRInputStream_1_0 read_value
WARNING: "IOP00810257: (MARSHAL) Could not find class"
org.omg.CORBA.MARSHAL: vmcid: SUN minor code: 257 completed: Maybe
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.couldNotFindClass(ORBUtilSystemException.java:8309)
at com.sun.corba.ee.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:984)
at com.sun.corba.ee.impl.encoding.CDRInputStream.read_value(CDRInputStream.java:259)
at com.sun.corba.ee.impl.io.IIOPInputStream.inputObjectField(IIOPInputStream.java:1987)
at com.sun.corba.ee.impl.io.IIOPInputStream.inputClassFields(IIOPInputStream.java:2211)
at com.sun.corba.ee.impl.io.IIOPInputStream.inputObject(IIOPInputStream.java:1219)
at com.sun.corba.ee.impl.io.IIOPInputStream.simpleReadObject(IIOPInputStream.java:398)
***exception in Client_1 ***
at com.sun.corba.ee.impl.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:329)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:295)
at com.sun.corba.ee.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:1005)
at com.sun.corba.ee.impl.encoding.CDRInputStream.read_value(CDRInputStream.java:259)
at com.sun.corba.ee.impl.presentation.rmi.DynamicMethodMarshallerImpl$14.read(DynamicMethodMarshallerImpl.java:333)
at com.sun.corba.ee.impl.presentation.rmi.DynamicMethodMarshallerImpl.readResult(DynamicMethodMarshallerImpl.java:424)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.privateInvoke(StubInvocationHandlerImpl.java:162)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.invoke(StubInvocationHandlerImpl.java:119)
at com.sun.corba.ee.impl.presentation.rmi.bcel.BCELStubBase.invoke(BCELStubBase.java:197)
at com.titan.ejb.__Tester1Remote_Remote_DynamicStub.findCustomer(__Tester1Remote_Remote_DynamicStub.java)
at com.titan.ejb._Tester1Remote_Wrapper.findCustomer(com.titan.ejb._Tester1Remote_Wrapper.java)
at com.titan.clients.Client_1.main(Client_1.java:37)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.util.Utility.invokeApplicationMain(Utility.java:232)
at com.sun.enterprise.appclient.MainWithModuleSupport.<init>(MainWithModuleSupport.java:329)
at com.sun.enterprise.appclient.Main.main(Main.java:180)
Caused by: java.lang.ClassNotFoundException
... 25 more
javax.ejb.EJBException: nested exception is: java.rmi.MarshalException: CORBA MARSHAL 1398079745 Maybe; nested exception is:
org.omg.CORBA.MARSHAL: vmcid: SUN minor code: 257 completed: Maybe
java.rmi.MarshalException: CORBA MARSHAL 1398079745 Maybe; nested exception is:
org.omg.CORBA.MARSHAL: vmcid: SUN minor code: 257 completed: Maybe
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.mapSystemException(Util.java:224)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.privateInvoke(StubInvocationHandlerImpl.java:172)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.invoke(StubInvocationHandlerImpl.java:119)
at com.sun.corba.ee.impl.presentation.rmi.bcel.BCELStubBase.invoke(BCELStubBase.java:197)
at com.titan.ejb.__Tester1Remote_Remote_DynamicStub.findCustomer(__Tester1Remote_Remote_DynamicStub.java)
at com.titan.ejb._Tester1Remote_Wrapper.findCustomer(com.titan.ejb._Tester1Remote_Wrapper.java)
at com.titan.clients.Client_1.main(Client_1.java:37)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.util.Utility.invokeApplicationMain(Utility.java:232)
at com.sun.enterprise.appclient.MainWithModuleSupport.<init>(MainWithModuleSupport.java:329)
at com.sun.enterprise.appclient.Main.main(Main.java:180)
Caused by: org.omg.CORBA.MARSHAL: vmcid: SUN minor code: 257 completed: Maybe
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.couldNotFindClass(ORBUtilSystemException.java:8309)
at com.sun.corba.ee.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:984)
at com.sun.corba.ee.impl.encoding.CDRInputStream.read_value(CDRInputStream.java:259)
at com.sun.corba.ee.impl.io.IIOPInputStream.inputObjectField(IIOPInputStream.java:1987)
at com.sun.corba.ee.impl.io.IIOPInputStream.inputClassFields(IIOPInputStream.java:2211)
at com.sun.corba.ee.impl.io.IIOPInputStream.inputObject(IIOPInputStream.java:1219)
at com.sun.corba.ee.impl.io.IIOPInputStream.simpleReadObject(IIOPInputStream.java:398)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:329)
at com.sun.corba.ee.impl.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:295)
at com.sun.corba.ee.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:1005)
at com.sun.corba.ee.impl.encoding.CDRInputStream.read_value(CDRInputStream.java:259)
at com.sun.corba.ee.impl.presentation.rmi.DynamicMethodMarshallerImpl$14.read(DynamicMethodMarshallerImpl.java:333)
at com.sun.corba.ee.impl.presentation.rmi.DynamicMethodMarshallerImpl.readResult(DynamicMethodMarshallerImpl.java:424)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.privateInvoke(StubInvocationHandlerImpl.java:162)
... 12 more
Caused by: java.lang.ClassNotFoundException
... 25 more
javax.ejb.EJBException: nested exception is: java.rmi.MarshalException: CORBA MARSHAL 1398079745 Maybe; nested exception is:
org.omg.CORBA.MARSHAL: vmcid: SUN minor code: 257 completed: Maybe
at com.titan.ejb._Tester1Remote_Wrapper.findCustomer(com.titan.ejb._Tester1Remote_Wrapper.java)
at com.titan.clients.Client_1.main(Client_1.java:37)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.util.Utility.invokeApplicationMain(Utility.java:232)
at com.sun.enterprise.appclient.MainWithModuleSupport.<init>(MainWithModuleSupport.java:329)
at com.sun.enterprise.appclient.Main.main(Main.java:180)

It appears to be a bug in Netbeans.
I have a similar error message with the following settings:
A session bean remote interface
be.macharis.toon.pacita.common.OriginFacadeRemoteA session bean implementing the remote interface
be.macharis.toon.pacita.common.OriginFacadeAt deploying the ejb module, the session bean is loaded in the JNDI registry under the name be.macharis.toon.pacita.common.OriginFacadeRemote (the server log says so).
I have the following code in a servlet:
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
try {
    Context ic = new InitialContext();
    OriginFacadeRemote originFacade = (OriginFacadeRemote)ic.lookup(OriginFacadeRemote.class.getName());
    originFacade.setOrigin(componentRegistry, OriginFacadeRemote.ELEMENT_CONTAINER); // <- exception here
} catch (NamingException e) {
    e.printStackTrace();
}Yet I get a java.lang.ClassNotFoundException during the EJB method call. The exception does not take place during execution of the method, but before, while the EJB container is still resolving the method. It thus must be a(nother) bug in the implementation of the EJB container.
And bugs that are outside your control are so much harder to deal with... There was another bug in the EJB container for serialising complex object that I could work around by explicitly serialising the Objects myself to byte arrays. It took me 5 days to do so. I don't know if I will manage to work around this bug. If I do, I will post my solution. For completeness, below my "clarifying" error dump:
javax.ejb.EJBException: nested exception is: java.rmi.MarshalException: CORBA MARSHAL 1398079745 Maybe; nested exception is:
     org.omg.CORBA.MARSHAL: ----------BEGIN server-side stack trace----------
org.omg.CORBA.MARSHAL:   vmcid: SUN minor code: 257 completed: Maybe
     at com.sun.corba.ee.impl.logging.ORBUtilSystemException.couldNotFindClass(ORBUtilSystemException.java:8309)
     at com.sun.corba.ee.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:984)
     at com.sun.corba.ee.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:850)
     at com.sun.corba.ee.impl.encoding.CDRInputStream_1_0.read_abstract_interface(CDRInputStream_1_0.java:844)
     at com.sun.corba.ee.impl.encoding.CDRInputStream_1_0.read_abstract_interface(CDRInputStream_1_0.java:834)
     at com.sun.corba.ee.impl.encoding.CDRInputStream.read_abstract_interface(CDRInputStream.java:275)
     at com.sun.corba.ee.impl.io.IIOPInputStream.readObjectDelegate(IIOPInputStream.java:361)
     at com.sun.corba.ee.impl.io.IIOPInputStream.readObjectOverride(IIOPInputStream.java:524)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:345)
     at java.util.HashMap.readObject(HashMap.java:1029)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.corba.ee.impl.io.IIOPInputStream.invokeObjectReader(IIOPInputStream.java:1692)
     at com.sun.corba.ee.impl.io.IIOPInputStream.inputObject(IIOPInputStream.java:1210)
     at com.sun.corba.ee.impl.io.IIOPInputStream.simpleReadObject(IIOPInputStream.java:398)
     at com.sun.corba.ee.impl.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:329)
     at com.sun.corba.ee.impl.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:295)
     at com.sun.corba.ee.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:1005)
     at com.sun.corba.ee.impl.encoding.CDRInputStream.read_value(CDRInputStream.java:259)
     at com.sun.corba.ee.impl.io.IIOPInputStream.inputObjectField(IIOPInputStream.java:1987)
     at com.sun.corba.ee.impl.io.IIOPInputStream.inputClassFields(IIOPInputStream.java:2211)
     at com.sun.corba.ee.impl.io.IIOPInputStream.inputObject(IIOPInputStream.java:1219)
     at com.sun.corba.ee.impl.io.IIOPInputStream.simpleReadObject(IIOPInputStream.java:398)
     at com.sun.corba.ee.impl.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:329)
     at com.sun.corba.ee.impl.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:295)
     at com.sun.corba.ee.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:1005)
     at com.sun.corba.ee.impl.encoding.CDRInputStream.read_value(CDRInputStream.java:259)
     at com.sun.corba.ee.impl.io.IIOPInputStream.inputObjectField(IIOPInputStream.java:1987)
     at com.sun.corba.ee.impl.io.IIOPInputStream.inputClassFields(IIOPInputStream.java:2211)
     at com.sun.corba.ee.impl.io.IIOPInputStream.inputObject(IIOPInputStream.java:1219)
     at com.sun.corba.ee.impl.io.IIOPInputStream.simpleReadObject(IIOPInputStream.java:398)
     at com.sun.corba.ee.impl.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:329)
     at com.sun.corba.ee.impl.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:295)
     at com.sun.corba.ee.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:1005)
     at com.sun.corba.ee.impl.encoding.CDRInputStream.read_value(CDRInputStream.java:259)
     at com.sun.corba.ee.impl.presentation.rmi.DynamicMethodMarshallerImpl$14.read(DynamicMethodMarshallerImpl.java:333)
     at com.sun.corba.ee.impl.presentation.rmi.DynamicMethodMarshallerImpl.readArguments(DynamicMethodMarshallerImpl.java:393)
     at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:119)
     at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:650)
     at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:193)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1705)
     at com.sun.corba.ee.impl.protocol.SharedCDRClientRequestDispatcherImpl.marshalingComplete(SharedCDRClientRequestDispatcherImpl.java:154)
     at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.invoke(CorbaClientDelegateImpl.java:194)
     at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.privateInvoke(StubInvocationHandlerImpl.java:159)
     at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.invoke(StubInvocationHandlerImpl.java:119)
     at com.sun.corba.ee.impl.presentation.rmi.bcel.BCELStubBase.invoke(BCELStubBase.java:197)
     at be.macharis.toon.pacita.common.__OriginFacadeRemote_Remote_DynamicStub.setOrigin(__OriginFacadeRemote_Remote_DynamicStub.java)
     at be.macharis.toon.pacita.common._OriginFacadeRemote_Wrapper.setOrigin(be.macharis.toon.pacita.common._OriginFacadeRemote_Wrapper.java)
     at pacita.servlets.ContainerRegistry.processRequest(ContainerRegistry.java:64)
     at pacita.servlets.ContainerRegistry.doGet(ContainerRegistry.java:95)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:278)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
     at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
     at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
     at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
     at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
     at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
     at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
     at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
     at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Caused by: java.lang.ClassNotFoundException
     ... 77 more
----------END server-side stack trace---------- vmcid: SUN minor code: 257 completed: Maybe

HT203288 Itunes can not find my music files. But I can with Windows . Lost over 8 hours trying to fix stupid itunes, Even removed it and reinstalled. Still nothing.

But I can using Windows.
Lost over 8 hours today. Still not working
Even deleted itunes and reinstalled.
My Music files are still there. But itunes can not find them.

Empty library or library full of broken links?
tt2

My soundbooth not function withe error code NV_OGL. the stament: "soundbooth could not find any capable playback modules". but pc system is working. Any one can help me?

Hi, I am SK Chew,My soundbooth is not function after few months not used and with an error code "NV_OGL" and the statement is "soundbooth could not find any capable playback modules". and my pc is working in good condition. any one can help me?

Quicktime errors http://forums.adobe.com/message/4545437 may help
Or, not exactly the same, but MAY be related
ExporterQuickTimeHost QT Version http://forums.adobe.com/thread/1109614

I can not find how to use the basic Mac air keyboard. where do i find it or do a tutorial board

I am new to the Mac worls and hardly used a PC . I used a Blackberry. How can i find how to use the macair key board. I can not get the plus sign or the brackets on my leyboard to work. The option key is called the atl key.. There is no easy guide for how to use all the Buttons on the Key board. where do i find them

Hello Sanjit_Das:
sorry for my english again !.
My purpose is almost the same as this:
https://forums.adobe.com/message/6137964#6137964#6137964
But I do not know which path must specify when the video is uploaded to assets:
Sorry to ask something so absurd.
I tried putting all
<source src = "assets / Myvideo.mp4" />
not working
<source src = "C: \ Users \ Angel \ Downloads \ NEW \ pruebamusevideo \ assets/Myvideo.mp4">
not work.
etc
Presenting want to work from any computer, DVD, memory stick ...
I'm going crazy.
I know it's something about the route.
From muse Vimeo links to work, but when I export them to HTML not working. I guess it's a problem related to the same.
Thank you very much again.

Can not find pictures

I can not find any of my pictures that are on my computer. I don't know what happened to them. The icon at the bottom of my screen for my pics isn't there anymore...
Also, my start up disk is full and I only use my computer for pictures (which i can no longer find) and internet…

Download from the Internet OmniDiskSweeper and Grand Perspective (both free) and open them. They will show all of you files and their respective sizes. Delete or transfer to an external HDD the files that you do not want on your MBA. Don't forget to empty Trash.
Ciao.

IPhoto can not find several photos, shows icon, but not pic itself and I did not move anything

I have more then 12'000 photos on iPhoto. After the last update it shows me all pics in the small icons, but when I click on them, severals are not whown - a black background with a grey triangle opens and a "!" in the mid. I suppose this means that iPhoto can not find the data. I already looked into the database and the files are really not there. But I did NOT move them! What happened? What can I do? (I would highly appreciate if I would not have to check every single photo and reimport it again!!!) Thank you in advance for your help!

Restore from your back up.
Regards
TD

Extras notes --- iPod works fine in iTunes, but doesn't show up in Windows

Hi all!
Gotta wierd situation.
My iPod works fine in iTunes.
I have had 'Enable for Disk Use' enabled for a long time. However, my iPod doesn't show up under My Computer on WinXP.
I'd like to add some new Notes and remove some old ones, but you have to do that thru Windows, not thru iTunes.
Any ideas how to fix this problem?

hi marky!
i noticed one thing. the iPod is formated as FAT32, but i have my HD in NTFS. could this be related?
no, that one's normal. we need to leave her as FAT32. see:
iPod no longer plays music after formatting or partitioning the hard disk
hmmmmm. it's like the "enable disk use" setting is just refusing to stick for you.
but maybe we've got a window of oppportunity while it's doing that initial sync. the rules seem to be different for you then.
maybe try switching enable disk use off. then eject her, and plug her back in again (while you've got itunes already running).
the second she shows up in the itunes sourcelist, try diving into the preferences tab, and re-enabling disk use.
(i checked, and it's possible for me to do this with attractive beast ... hoping here that doing the "enable disk use" under these circumstances might get it to stick for you.)
love, b

Im going to go to apple to show my phone that my wi-fi wasnt working and now iv droped my phone and the hole screen came out, its not mashed it just came out, but work, so now im worried apple my wont take care of it

im going to go to apple to show my phone that my wi-fi wasnt working and now iv droped my phone and the hole screen came out, its not smashed it just came out, butstill works, so now im worried apple my wont take care of it, what will they do ?? it was a bran new phone

You are correct to worry. There is no way for Apple to know if the wifi problem was before or after the drop. If you have Apple Care +, you can get a replacement device for a deductible. If not, user damage is not covered under the warranty or regular Apple Care. You would need to see if they will repair the screen (at your cost), or if you would have to purchase an out of warranty replacement.

Spotlight does not find files with "_" (underscores), but only for certain file types

Hey Folks,
this is strange, maybe someone has an idea.
I already searched the internet for a while, nothing found so far.
I have a file "calc_mean.m" on my desktop.
When I type "calc" in spotlight, it shows the file.
But when I type "calc_" it suddenly does not show the file anymore. Nor does find the file, when I enter "calc_mean.m" in spotlight.
When I enter "calc mean.m" in spotlight, it finds it (using space instead of the underscore).
Now comes the real surprise:
When I rename the file to "calc_mean.txt", spotlight suddenly DOES find the file when entering "calc_mean.txt".
I recreated this "feature" with other files, copying and renaming ".txt" files to ".m" files, and if there's a underscore in the file, spotlight wont find it.
Playing around a bit more, it seems spotlight does find files with underscore when they are documents, at least it works for the following extensions:
.pdf
.doc
.txt
.xls
But these extensions for example do not work:
.mp3
.m
.k
.a
.ka
(and other random endings I tried).
I am pretty confused. Sure it's no big deal learning to search for files that include underscores in their name using space instead. But I'm still quite puzzled. Any idea?

All of those have meaning in various database search syntax (not sure if it matters).
_ usually means any character.
% usually means any run of characters.
- is often used to negate what comes next, i.e. "don't include results that have the following text."
I don't see any problem on my Mac, though.
I also don't have any problem finding file names with those accented characters using Spotlight. I would suggest reindexing Spotlight, but if cmd-f finds them, I'm not sure that would help.
Spotlight: How to re-index folders or volumes

Screensaver not finding pictures - it USED to, but doesn't now

Similar Messages

Maybe you are looking for