Script for azure to shutdown all vm's when running out of money

Hallo! I need to stop all my vm's in azure portal when my balance is 0$ How can i do it? maybe some script?

Hi,
You might not be able to Enable Shutdown when running short of Balance since the Billing is not exposed via Powershell or REST API.
However, if you would like to schedule the Start/Stop of VM as per a schedule, it is indeed possible with Azure Automation Runbook.
You might want to follow the below article to know more about Azure Automation.
http://azure.microsoft.com/en-us/documentation/articles/automation-create-runbook-from-samples/
Hope this helps !
Regards,
Sowmya

Similar Messages

  • Shell Script  for Startup and Shutdown the database

    Hi,
    i want Shell Script for Startup and Shutdown the database in Solaries.
    could any one can hep me where i can get this script. or send to me to [email protected]
    Thanks & Regards,
    Gangi reddy

    SHUTDOWN
    SHUTDOWN ABORT]
    Shuts down a currently running Oracle instance, optionally closing and dismounting a database.
    Terms
    Refer to the following list for a description of each term or clause:
    ABORT
    Proceeds with the fastest possible shutdown of the database without waiting for calls to complete or users to disconnect.
    Uncommitted transactions are not rolled back. Client SQL statements currently being processed are terminated. All users currently connected to the database are implicitly disconnected and the next database startup will require instance recovery.
    You must use this option if a background process terminates abnormally.
    IMMEDIATE
    Does not wait for current calls to complete or users to disconnect from the database.
    Further connects are prohibited. The database is closed and dismounted. The instance is shutdown and no instance recovery is required on the next database startup.
    NORMAL
    NORMAL is the default option which waits for users to disconnect from the database.
    Further connects are prohibited. The database is closed and dismounted. The instance is shutdown and no instance recovery is required on the next database startup.
    TRANSACTIONAL [LOCAL]
    Performs a planned shutdown of an instance while allowing active transactions to complete first. It prevents clients from losing work without requiring all users to log off.
    No client can start a new transaction on this instance. Attempting to start a new transaction results in disconnection. After completion of all transactions, any client still connected to the instance is disconnected. Now the instance shuts down just as it would if a SHUTDOWN IMMEDIATE statement was submitted. The next startup of the database will not require any instance recovery procedures.
    The LOCAL mode specifies a transactional shutdown on the local instance only, so that it only waits on local transactions to complete, not all transactions. This is useful, for example, for scheduled outage maintenance.
    Usage
    SHUTDOWN with no arguments is equivalent to SHUTDOWN NORMAL.
    You must be connected to a database as SYSOPER, or SYSDBA. You cannot connect via a multi-threaded server. For more information about connecting to a database, see the CONNECT command earlier in this chapter.
    http://download-west.oracle.com/docs/cd/B10501_01/server.920/a90842/ch13.htm#1013607
    Joel Pérez

  • Scripts for changing the address of the user when they have been in the box for 6 months

    Scripts for changing the address of the user when they have been in the box for 6 months
    If users are in a folder for deactivated users and disabled users in Active Directory, and been there for 6 moths do: change email address in exchange to existing email address.old 
    Anyone have suggestions on how I can go about it?

    What is this "box"?  What is this "folder" you're asking about?  You'll likely get a better answer if you use standard terminology.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • How to preserve battery life ~ used to last all day, now it runs out by lunchtime

    How to preserve battery life ~ used to last all day, now it runs out by lunchtime

    I would advise updating to iOS 7. It might improve your battery and the bugs are worked out by now.
    If not wanting to update because of the new look, here are some tips:
    -Turn off bluetooth when not needed.
    -Connect to wifi and turn off cellular data when possible.
    -When not around wifi, turn wifi off.
    -Keep your screen at around 50% brightness.
    -Disbale certain apps or features in Settings<Privacy<Location Services if they are not necessary.
    -Close out of apps in the multitasking bar.
    -Enable airplane mode when you plan on not using your phone for a while.
    Hopefully these tips help you. If your battery does eventually get too bad, you can get it changed out by apple. If youve had your device for under a year, you can take it into an Apple store and theyll give you a new phone in return. Have a good night and good luck!

  • Question.Why don't the apple company ever make a memory card that people could use for their apple product just in case customers run out of memory on their apple product?

    Question.Why don't the apple company ever make a memory card that people could use for their apple product just in case customers run out of memory on their apple product?

    One thing the iPad lacks is a file manager. There is no file explorer native on the iPad. If you started adding plugin cards, then you add the need for that.  And, in PC's, most viruses spread via the file explorer (the definition of a virus is a malicious program that propagates itself across multiple programs)
    There are a few drives out there for iDevices. Such as the WiDrive and others.

  • [svn] 1433: adding 'console' security constraint to MBeanServerGateway remote object for MBean tests and ds-console , used when running on Websphere with administrative security enabled.

    Revision: 1433
    Author: [email protected]
    Date: 2008-04-28 13:13:12 -0700 (Mon, 28 Apr 2008)
    Log Message:
    adding 'console' security constraint to MBeanServerGateway remote object for MBean tests and ds-console, used when running on Websphere with administrative security enabled. Should call setCredentials("bob","bob1") to use this RO.
    Modified Paths:
    blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/remoting-config.mods.xml
    blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.xml

    Hi,
    It seems that you were using Hyper-V Remote Management Configuration Utility from the link
    http://code.msdn.microsoft.com/HVRemote, if so, you can refer to the following link.
    Configure Hyper-V Remote Management in seconds
    http://blogs.technet.com/jhoward/archive/2008/11/14/configure-hyper-v-remote-management-in-seconds.aspx
    By the way, if you want to perform the further research about Hyper-V Remote Management Configuration Utility, it is recommend that you to get further
    support in the corresponding community so that you can get the most qualified pool of respondents. Thanks for your understanding.
    For your convenience, I have list the related link as followed.
    Discussions for Hyper-V Remote Management Configuration Utility
    http://code.msdn.microsoft.com/HVRemote/Thread/List.aspx
    Best Regards,
    Vincent Hu

  • Sql Server Script for the List of all Country State and City

    I am searching for the Sql Server Script of all country State and City with the Following type
    For the Country only 2 Columns are there i.e. CountryId and CountryName(CountryId is primary Key)
    For the State 3 Columns are there i.e. CountryId, StateId and StateName(StateId is Primary Key and CountryId is Foreign Key)
    For the City 3 Columns are there i.e. StateId ,CityId and CityName(CityId is PrimaryKey and StateId is foreign Key).
    I need this type of Script with Column name. plzzz help me out i m stuck i didnt get the list as i want.
    Thanx and Regrads,

    Hi Vishnu,
    According to your description, you want to list all countries, states and cities, right?
    I have tested it on my local environment, here is a sample script for you reference.
    select
    [dbo].[Country].[CountryId]
    , [dbo].[Country].[CountryName]
    , [dbo].[State].[StateId]
    , [dbo].[State].[StateName]
    , [dbo].[City].[CityId]
    , [dbo].[City].[CityName]
    from
    [dbo].[Country]
    left join [dbo].[State] on [dbo].[Country].[CountryId]=[dbo].[State].[CountryId]
    left join [dbo].[City] on [dbo].[State].[StateId]=[dbo].[City].[StateId]
    Regards,
    Charlie Liao
    TechNet Community Support

  • How to create a 2 digit (gigabyte) file system to be used for 3 digit tiny size files and not running out of inodes

    I have a 83Gb file system that apparently is not full, but its actually full, because I have run out of inodes, and I have 10 million files in there, so I want to create another that will cater for this inode issue. My question is if I use the
    newfs -T
    option will it work? As its only going to be 90Gb?

    You use probably a UFS file system, right ? Then in this case, use the "-i" option with a value less as 8192. 8192 is the default value for a UFS filesystem that is between 3GB and 1 TB size.
    But if you want to store 10M of files, UFS will be limited to 1M per TB : 64-bit: Support of MultiterabyteUFS File Systems (System Administration Guide: Devices and File Systems)
    In this case, use instead UFS a ZFS filesystem that supports 2^48 entries !!!

  • Script for performing clean shutdown before windows shutdown

    Hi all,
    I need a script to perform a clean oracle shutdown every time that windows going to shutdown.I need this to be sure that there wont be any instance recovery every time I startup the oracle(Mostly I fear from header inconsistency and ...).
    Is there any thing that I can deploy for my development sites?
    -Your help will be so appreciated

    StartDB.bat
    =============
    net start OracleServiceORCL
    set oracle_sid=ORCL
    C:\oracle\ora92\bin\sqlplus -s /nolog @C:\startDB.sql
    net start OracleOraHome92TNSListener
    net start OracleOraHome92Agent
    pause
    startDB.sql
    ============
    connect / as sysdba
    startup pfile=initORCL.ora
    ==if you are using spfile, just say, startup
    exit
    StopDB.bat
    ===============
    set oracle_sid=ORCL
    C:\oracle\ora92\bin\sqlplus -s /nolog @C:\stopDB.sql
    net stop OracleOraHome92Agent
    net stop OracleServiceORCL
    pause
    connect / as sysDBA
    shutdown immediate
    exit
    Above scripts used for Oracle 9i or higher versions.
    Well, you can also do these with autostart parameter in the regedit.
    Jaffar

  • My iPad has been on a black screen for 2 weeks. All it does when I try to reboot is make the black screen backlighted.

    I have an iPad 2 and it's been working for about 2 and half years without a problem. It's now stuck on a black screen and whenever I try to reboot it the black screen simply gets lighter. It's been completely charged. Went on customer support with Apple for 2 hours and they couldn't help and wouldn't send a replacement. Please help!

    Make an appointment at your local apple store and have them check it out. If the screen or guts inside area dead it's beyond a user fix.

  • My macbook pro I got for Christmas 2010 is all of a sudden running slow. What can I do?

    I got my Macbook pro Christmas 2010. ll of a sudden it has started running slow. Can someone please help me?

    Pawleys1 wrote:
    I got my Macbook pro Christmas 2010. ll of a sudden it has started running slow. Can someone please help me?
    Some more information will be very helpful.
    Which version of OS X is running?
    What happened last before the MacBook became slow?
    Software installed or deleted?
    Other major changes on the system?
    Lupunus

  • Create a script that can create entire schema with data when run

    Hi,
    I need to create a script that creates the entire schema on a database when the script is run. the need is that the script should be capable of creating all schema objects with grants and all, including the table data.
    The same objective can be achived through export / import.But we don't want to deliver the dump files instead a script which will be executed on a database created with same database stucture of tablespaces etc.
    I have serched the net but yet to achive the goal.
    Is there any oracle utility / script file that can do this for me ?
    Can Oracle import be used to create the same, the way it is used to create index File ?
    Please suggest !!
    Regards

    You should look at the package dbms_metadata to be able to extract all ddl to recreate a schema. To load the data, you could write scripts that will generate insert statements and spool these to a file (sql generating sql), or you could write scripts that generates a delimited file and use sql loader to load the data into the target system. There are lots of little gotchas in either of these 2 solutions. The biggest 2 right away. 1 - picking a delimiter, 2 - dealing with carriage returns in text data. SQL Developer is able to do some extraction, so before you go writing this stuff yourself, I would check it out to see if it does what you are looking for before you reinvent the wheel.

  • Why does AE CS4 consume all my memory when running a preview?

    I have Windows Vista x64 with 4Gb of RAM but everytime i want to make a RAM PREVIEW the program does not release the memory in use. For example: I start with AE CS4 using 2gb of ram, then i make a preview and it reaches to 3gb of ram. If I continue making previews it comes a time when all hangs up becouse i have no more memory left!
    I remember from previous versions of After Effects that the "green bar" over the timeline, when you were lack off memory, it started to move at some point and the older rendered frames start to disapear in order to render the new ones, making the lenght of the green bar as long as possible but without taking out ALL your memory.
    I've found in Premiere CS4 an option that says: Optimize Rendering for Memory/Performance. This help me out with the same issue in Premiere, but I can't find anything like this en After Effects.
    Any suggestions?

    Take a look at the memory and cache settings. Try increasing the amount of memory to leave for other applications. Also, MP4, due to it being long-GOP, does require a higher memory footprint to decode than some of the other formats. AE is designed to use as much ram as you tell it when doing a RAM preview. Depending what else you have running on your system, our defaults may be too much.
    For instance Internet Explorer is taking 100 MB just to show this page. If you launch task manager, you'll need to add the Working Set column to get an idea of how much RAM something needs.
    --chris

  • Wont hold a charge - wifi, location, bluetooth all off and charge runs out in 3 hours (no calls even)

    Everything working fine and then all of sudden it wont hold a charge
    - Turned everything off - wifi, bluetooth, locatione etc
    - still wont hold charge for than 3 hours ( no talking even .

    Joe - Pretty much all of my media is either ripped or downloaded through itunes. I don't use any file sharing sites. I'm going to have to go through and delete the few things I do have that I don't remember the source.
    Now this is interesting. I went and picked up my ipod tonight, and talked to the guy at the apple store. He said that since the ipod's been through two test cycles, the problem must be in my playlist. He told me that in testing they completely wipe the ipod and load it with test songs to see how long playback lasts. I got it home and turned it on, and it has all my old stuff on it. Is that normal? I figured it would just be wiped. And to this point it seems to be holding a charge, which makes no sense if the problem was with my files because they're all still on there. Very confused. I'm going to leave it another day without syncing it to see what happens, it really doesn't make any sense.

  • Why does my iPad ask for a credit card to buy apps when I already have money on my iTunes account?

    Why does it do that? It used to do that for free apps to but once I put my credit card on it, it stop asking for free apps. But now it still wants a card even though I still have 20 dollars left from a birthday gift card. I heard somewhere that this was because of a new feature to stop kids from downloading apps that their parents don't want them to or buying a bunch of apps and racking up a huge bill, is this part of it?

    Is the card expired? You cannot have an expired card in your account.
    JeffoMcSpeffo wrote:
    I have $17.97 on my account but when i try and buy Doris (worth only $10.99) i need to fix my credit card information, which also keeps saying theres an error
    What is the error?
    Try this -> http://support.apple.com/kb/TS1646

Maybe you are looking for