How to create a 2 digit (gigabyte) file system to be used for 3 digit tiny size files and not running out of inodes

I have a 83Gb file system that apparently is not full, but its actually full, because I have run out of inodes, and I have 10 million files in there, so I want to create another that will cater for this inode issue. My question is if I use the
newfs -T
option will it work? As its only going to be 90Gb?

You use probably a UFS file system, right ? Then in this case, use the "-i" option with a value less as 8192. 8192 is the default value for a UFS filesystem that is between 3GB and 1 TB size.
But if you want to store 10M of files, UFS will be limited to 1M per TB : 64-bit: Support of MultiterabyteUFS File Systems (System Administration Guide: Devices and File Systems)
In this case, use instead UFS a ZFS filesystem that supports 2^48 entries !!!

Similar Messages

HT2493 How to change preview image of a file and NOT the icon ?

Hello dear Mac users
How to change preview image of a file and NOT the icon ?
I know how to change the icon of a file, but I wish to know how to change the preview of any file.
For example: my file is "mysong.aif", I changed the icon to be "mylogo.png" using cmd+i, cmd+v on the icon. But the preview of the file still remain the same.
I know it can be changed using iTunes, but I don't want to import all my files in iTune, and iTune cannot import all type of files.
I hope someone will understand my needs...
Thanks!

Thanks BeerbarX
You can't change the preview image for anything
hoo
QuickLook plugin
what are the plugin ?
In the case of a music file, it will be that generic black box with a note on it
That is exactly what I'm asking about !
MP3 which has a special tagging standard that can include artwork
How can I "tag" my MP3 without going thru iTunes ? Is it possible to do it dirrectly in the Finder ? Is there other type of files that can include such tags ?
Thank you for answering my question , wich I have to admit may seem useless, but I wish I could put something like a signature logo on each of the different file I produce (as AIF for music and MP4 for video clip) instead of that generic black box with a note on it, and by the meantime keeping a different icon for all of them in order to illustrate theire content.

How to create new Sheet in Excel file and write into it

Hi to all, my requirement is this:
I have an excel file (.xls) with multiple sheets (three sheets for precision: sheet1, sheet2 and sheet3).
I must create in the same excel file new sheet, say sheet4, read data from sheet1, sheet2 and sheet3 and write them into sheet4.
How to realize this in SSIS?
Expecially, Is it possible to realize this in SSIS?
thanks in advance.

You need to create the sheet with the required metadata. There's no use creating blank sheet.
Also metadata has to be fixed using a sample sheet prior to start of the package for setting the mapping. You may create a excel template for this purpose to just set the mapping at design time.
At runtime pass actual excel sheet path for ExcelFilePath property of the source to point to correct file.
Also the create table statement should include the same metadata info (columns)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Hi, well it works fine! I have used a sample sheet prior to start of the package for setting the mapping.
Next at run time pass actual excel sheet path for ExcelFilePath property of the source to point to correct file.
However I have set also ValidateExternalMetadata properties of the Excel Destination to false and DelayValidation properties of the package to true.
Now my problem is the following:
I stored the three sheets name (sheet1, sheet2, sheet3) in the Object type user variable through a script task and the foreach loop loops through the three sheets stored in the variable.
Now, I want that at each iteration the CURRENT VALUE of the Object type user variable is mapped into another user variable wich in turn is given in input to the Excel Source.
Resuming:
-) I have to copy the content of three sheets (sheet1, sheet2, sheet3) of excel file into another new sheet, sheet4.
-) I stored the three sheets name (sheet1, sheet2, sheet3) in the Object type user variable.
-) With a foreach loop container I loops the three sheets stored in the Object type user variable.
-) Within a foreach loop container I have a Data Flow Task that transfer data from source sheet (sheet1, sheet2, sheet3) into destination sheet, sheet4.
-) PROBLEM: how to change dinamically at each iteration of the foreach loop the name of source sheet? In the destination excel Task the sheet is always the same at each iteration, sheet4. But in the source excel task the name of sheet musts change at each
iteration. In particular at the first iteration the name of the source sheet must be "sheet1$", at the second iteration "sheet2$", in the last iteration "sheet3$".
How to change sheet name dinamically at each iteration?
thanks.

How do I work on my raw files and not the jpeg files that currently dispaly

When I launch Aperture my pictures display in jpeg format, I do however take all my pictures in both raw and jpeg. How do I convert and work on the raw files? Is my interpretation that I am working on my Jpeg files correct?
My thanks for any help provided.

The preference to import both and use RAW vs. JPEG as master can be set on import and you can convert on a project-by-project basis.
You can tell what Aperture is using a few different ways. If you select the meta-data tab then show the "File Info" (the pull-down menu) it'll show you exactly which file it's using as the master.
Also if you right-click over the mouse you'll see one of the pop-up menu options to "Set JPEG as Master" or "Set RAW as Master" (it'll show whichever one you aren't using -- so if it offers to "Set RAW..." then that means it's currently using JPEG.
To convert a whole project, it's as gocuk says in the reply above.... select the "Library" tab at left, make sure you highlight the Project you want to convert, then in the menubar pick "Photos" -> "Switch Project to use RAW as Masters" (which will only be bold and selectable if it's currently set to use JPEG).

How to create a table in the file using java code.?

HI,
I should export the data from the view objects to a word document. I have done that but I should
display the data in the form of a table.
Kindly come up with the necessary information on how to create a table in the file using java.
Thanks,
Phani

Hi, Thank you for responding to my query.
The below are the details of my code.
DCBindingContainer dcBindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding StudentDetailsContent =
(DCIteratorBinding)dcBindings.get("StudentView1Iterator");
OutputStreamWriter w = new OutputStreamWriter(outputStream, "UTF-8");
Row currentRow =
StudentDetailsContent.getRowSetIterator().first();
Object a[]= currentRow.getAttributeValues();
int i;
for(i=0 ;i<=a.length;i++){
w.write(a.toString());
w.write(" ");
w.flush();
I am usning this coding to achieve the task of exporting data to file.
I need to display this information in the table that is where I need help from you people.
Thanks,

How to create Inbound Idoc from XML file-Need help urgently

Hi,
can any one tell how to create inbound Idoc from XML file.
we have xml file in application server Ex. /usr/INT/SMS/PAYTEXT.xml' we want to generate inbound idoc from this file.we are successfully able to generate outbound XML file from outbound Idoc by using the XML port. But not able to generate idoc from XML file by using we19 or we16.
Please let me know the process to trigger inbound Idoc with out using XI and any other components.
Thanks in advance
Dora Reddy

Hi .. Did either of you get a result on this?
My question is the same really .. I am testing with WE19 and it seems SAP cannot accept an XML inbound file as standard.
I see lots of mention of using a Function Module.
Am I correct in saying therefore that ABAP development is required to create a program to run the FM and process the idoc?
Or is there something tht can be done with Standard SAP?
Thanks
Lee

How do I save and re-use a fillable form once I have created it? It is a form i will use for multiple medcial clients I see, then print out and put in paper chart, and then do it again for another patient. - I just got Acrobat XI

I've created a fillable form from a Word document, but how do I save and re-use a a fillable form once I have created it? It is a form I will use for multiple medical patients, printing out the filled in form to put in paper chart (no need to save filled out form), and then fill blank form again for another patient? - I just got acrobat X

Thanks!
That should also save the blank form for future re-use, right.?
Can I also file the blank form in the file system, and then retrieve it as a blank form when I have a next patient need for it?
Thanks
Michael

How can I get to read a large file and not break it up into bits

Hi,
How do I read a large file and not get the file cut into bits so each has its own beginning and ending.
like
1.aaa
2.aaa
3.aaa
4....
10.bbb
11.bbb
12.bbb
13.bbb
if the file was read on the line 11 and I wanted to read at 3 and then read again at 10.
how do I specify the byte in the file of the large file since the read function has a read(byteb[],index,bytes to read);
And it will only index in the array of bytes itself.
Thanks
San Htat

tjacobs01 wrote:
Peter__Lawrey wrote:
Try RandomAccessFile. Not only do I hate RandomAccessFiles because of their inefficiency and limited use in today's computing world, The one dominated by small devices with SSD? Or the one dominated by large database servers and b-trees?
I would also like to hate on the name 'RandomAccessFile' almost always, there's nothing 'random' about the access. I tend to think of the tens of thousands of databases users were found to have created in local drives in one previous employer's audit. Where's the company's mission-critical software? It's in some random Access file.
Couldn't someone have come up with a better name, like NonlinearAccessFile? I guess the same goes for RAM to...Non-linear would imply access times other than O(N), but typically not constant, whereas RAM is nominally O(1), except it is highly optimised for consecutive access, as are spinning disk files, except RAM is fast in either direction.
[one of these things is not like the other|http://www.tbray.org/ongoing/When/200x/2008/11/20/2008-Disk-Performance#p-11] silicon disks are much better at random access than rust disks and [Machine architecture|http://video.google.com/videoplay?docid=-4714369049736584770] at about 1:40 - RAM is much worse at random access than sequential.

How to create a backend administrator content management system?

How to create a backend administrator content management system using SQLyog515 and JSP only.
Can give suggestions?
Thanks,
JSPnewbie*
Message was edited by:
Liting_JSPnewbie

Have a look at Perch
Perch - The really little content management system (CMS) - Perch
It requires a php/mysql database to run but the tables and set up are all automated through the Perch set up files - you just need a server that runs php/mysql. It works on the same principals as the one Ben suggested but its a lot cheaper for a one off site - however if you intend to build more CMS driven sites the one Ben suggested might be more financially viable in the long run.
The nice thing about Perch CMS is it fits in with your workflow unlike Wordpress/Joomla where you have to jump through hoops to change anything.
Plus I think you can take Perch for a spin before buying (or at least you could when I was exploring CMSs) - you can't with Power CMS. I never investigated Power CMS beacuse I would not buy something before trying it. It looks good but it might be a bit dated as it doesnt seem to be in continuous develoment. Perch is in a constant state of development and the guys are working to make it better on a daily basis.

I created a multi-layered Photoshop file and the backgroud layer changed to gray and all other layers whacked out. I tried reopening it and restarting photoshop. What happened to my file?

I created a multi-layered Photoshop file and the backgroud layer changed to gray and all other layers whacked out. I tried reopening it and restarting photoshop. What happened to my file?

Your file is most likely toast, but still:
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

When I create a text message from my contact on my iphone 5, the contacts mobile number appears and not there name. But when they respond to my text, is shows up as a new text message with there name. How do I fix this?

When I create a text message from my contact on my iphone 5, the contacts mobile number appears and not there name. But when they respond to my text, is shows up as a new text message with there name. How do I fix this?

Double click the home button and swipe up the messages app to stop it, then open the app again. This pretty much completely stops the process and freshly opens it again, resolving problems at times. I have had this happen before as well on my iPad, I get a banner, check messages, and nothing new is there.
If that doesn't work, close the app like suggested above, but then restart the phone by holding down the home and lock button for 10-15 seconds until the apple logo appears.

How do I download a Adobe PDF file and get it converted to a Word document?

How do I download a Adobe PDF file and get it converted to a Word document?

Download: you just download it as you would any other document.
Convert to Word: either using the ExportPDF online service, or Acrobat.

How to create a 2 digit (gigabyte) file system to be used for 3 digit tiny size files and not running out of inodes

Similar Messages

Maybe you are looking for