Script for checking hardware failures on Solaris

Hi all,
I am trying to write a script that checks failures/faults on the Solaris servers(8/9/10) using commands prtdiag -v, echo | format,metastat errors and iostat errors .
Does anyone have scripts like that?
Cheers

please share the script...It doesn't work that way.
These are technical forums, not replacements for you doing your own work.
People will be happy to respond with suggestions when you show what you have done but you need to display that you have done some effort first. You have not pasted any of your script here so no one can suggest any improvements to your work.
Go read the first two replies. They give you a lot of possibilities.

Similar Messages

Can SunMC send mail alert to sysadmin for any hardware failure?

Hi All
for SunMC 3.61 or 4.0,, Sunmc can send mail alert to sysadmin if hardware failure.
1. I noticed that the email actions from Attribute Editor Actions Panel is not for all the hardware attribute.
is there any way to send mail alert to sysadmin for any hardware failure?
2. does SunMC monitor Sun Fire T2000 hardware fully?

Hi EricTan,
erictan wrote:
Hi All
for SunMC 3.61 or 4.0,, Sunmc can send mail alert to sysadmin if hardware failure.
1. I noticed that the email actions from Attribute Editor Actions Panel is not for all the hardware attribute.
is there any way to send mail alert to sysadmin for any hardware failure?The out-of-the box notifications in SunMC must be set up for every data point on every system, which can be a pain to configure and manage in all but the smallest environments. And as you've noticed, for some hardware attributes there are no "Actions" tabs the allow you to configure email. To gain the features of centralized notification, and to get alarms from all sources of events in SunMC, you should consider installing [PrimeAlert EventAction|http://www.halcyoninc.com/products/EventAction/index.php] . It ships with a 30-day eval license, and if you need any help setting it up, please let me know.
2. does SunMC monitor Sun Fire T2000 hardware fully?Yes, the Tx000 series systems have some of the best hardware support available in SunMC. As an example you can look at a T2000 screenshot and list of hardware info [in this post about SunMC and xVM Ops Center|http://forums.halcyoninc.com/showthread.php?t=109] .
Regards,
Regards,
[email protected]
[http://www.HalcyonInc.com|http://www.HalcyonInc.com]
New !! : [http://forums.HalcyonInc.com|http://forums.HalcyonInc.com] !!

Power Shell Script for Check Remote machinces are live or not

I have required a Power Shell Script for Check multiple Remote machines are live or not.Please guide me

This will do it.
http://gallery.technet.microsoft.com/Ping-IP-Adress-Range-d90ce82d
¯\_(ツ)_/¯

Script for 'Check Links Before Opening Document' preference

I'm trying to find the VB script for changing the "Check Links Before Opening Document" checkbox on the File Handling panel in the Preferences dialog? I haven't found any documentation referring to the Links items on that panel.
Bob

Thanks for the info.
Was there a document you pulled this from?
I have an old document from CS2 days that is invaluable for providing a detailed list of available script methods and properties. Obviously things that have been added in subsequent InDesign releases aren't in this document. Later InDesign CS releases offer script SDKs that contain helpful sample scripts but I don't find a detailed summary similar to one from CS2. Have I just not found them? Or how does one find the script method/property for things not contained in the sample scripts?

Executing a powershell script for checking duplicate users while creating a AD user throug ADUC console.

Hi,
I have a text file in which some SamAccountNames are present.I need to check the file while creating a new users through ADUC console.If a username that is going to create through ADUC console is present in the file, then it should prompt a message
that the user is already present in the text file.
Is there any possibility of contacting the powershell script from the ADUC console.If so, then while creating a new user through ADUC console, what is the proceedure for executing that powershell script.
please provide me the approriate solutions.
Thanks
Prasanthi k

Run the below Powershell Script for users are exist or not in AD. Later you can create the users.
#Find Users exist in AD or Not?
#Biswajit Biswas
$users = get-content c:\users.txt
foreach ($user in $users) {
$User = Get-ADUser -Filter {(samaccountname -eq $user)}
If ($user -eq $Null) {"User does not exist in AD ($user)" }
Else {"User found in AD ($user)"}
Active Directory Users attributes-Powershell
http://gallery.technet.microsoft.com/scriptcenter/Getting-Users-ALL-7417b71d
Regards~Biswajit
Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights.
MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin
MY BLOG
Domain Controllers inventory-Quest Powershell
Generate Report for Bulk Servers-LastBootUpTime,SerialNumber,InstallDate
Generate a Report for installed Hotfix for Bulk Servers

ECMA script for checking active workflows for an list item

Hi i am having more than 1 workflow associated with the list if there is any workflow that is active for an item then i need to prevent starting another workflow for the same item. I am using the following code to achieve the same. Can anyone please provide
me the ECMA object model equivalent for achieving the same.
//Check for any active workflows for the document
private void CheckForActiveWorkflows()
// Parameters 'List' and 'ID' will be null for site workflows.
if (!String.IsNullOrEmpty(Request.Params["List"]) && !String.IsNullOrEmpty(Request.Params["ID"]))
this.workflowList = this.Web.Lists[new Guid(Request.Params["List"])];
this.workflowListItem = this.workflowList.GetItemById(Convert.ToInt32(Request.Params["ID"]));
SPWorkflowManager manager = this.Site.WorkflowManager;
SPWorkflowCollection workflowCollection = manager.GetItemActiveWorkflows(this.workflowListItem);
if (workflowCollection.Count > 0)
SPUtility.TransferToErrorPage("An workflow is already running for the document. Kindly complete it before starting a new workflow");
}

Hi,
According to your post, my understanding is that you wanted to use ECMA script to check active workflows for an list item.
You can use the Workflow web service "/_vti_bin/workflow.asmx"
- GetWorkflowDataForItem operation in particular.
Here is a great blog for you to take a look at:
http://jamestsai.net/Blog/post/Using-JavaScript-to-check-SharePoint-list-item-workflow-status-via-Web-Service.aspx
In addition, you can use
SPServices. For more information, please refer to:
http://sharepoint.stackexchange.com/questions/72962/is-there-a-way-to-check-if-a-workflow-is-completed-using-javascript
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Unix script for checking the user account status

Hi All,
i have created one unix script to check the status of the user in diff databases.
#!/bin/ksh
useracctreport.txt if [ ! -f hh ];
then
echo "Database file does not exist"
fi
echo "Enter Username"
read USER
echo "Enter the password"
stty -echo
read PASS
stty echo
for j in `cat users`
do
j="`echo $j| tr '[a-z]' '[A-Z]'`"
for i in `cat hh`
do
sqlplus -s $USER/$PASS\@$i <<EOF >> useracctreport.txt
column USERNAME format a8
column ACCOUNT_STATUS format a5
!echo "*****User $j Status in $i DB*****"
select USERNAME,ACCOUNT_STATUS from dba_users where username=('$j');
select OBJECT_TYPE,count(*) from dba_objects where owner='$j' group by object_type;
EOF
done
done
In log file ,i get the below error when its unable to connect to the DB.
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}] | [INTERNAL]
where <logon> ::= <username>[<password>][@<connect_string>] | /
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}] | [INTERNAL]
where <logon> ::= <username>[<password>][@<connect_string>] | /
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
ERROR:
ORA-01017: invalid username/password; logon denied
Is there any way i can supress this error?
and is there any other way i can make this script faster.Thanks a lot for your help

Hi,
The failing line is
sqlplus -s $USER/$PASS\@$i <<EOF >> useracctreport.txtYou should test the connect statement you provide to sqlplus. For example:
CONSTRING=$USER/$PASS\@$i
echo Connect string used: $CONSTRING
sqlplus -s $CONSTRING <<EOF >> useracctreport.txtCheck the echoed value. It's malformed. Correct it appropriately.
Yoann.

Bash script for checking link status

So I'm doing some SEO work I've been tasked with checking a couple hundred thousand back links for quality. I found myself spending a lot of time navigating to sites that no longer existed. I figured I would make a bash script that checks if the links are active first. The problem is my script is slower than evolution. I'm no bash guru or anything so I figured maybe I would see if there are some optimizations you folks can think of. Here is what I am working with:
#!/bin/bash
while read line
do
#pull page source and grep for domain
curl -s "$line" | grep "example.com"
if [[ $? -eq 0 ]]
then
echo \"$line\",\"link active\" >> csv.csv else
echo \"$line\",\"REMOVED\" >> csv.csv
fi
done < <(cat links.txt)
Can you guys think of another way of doing this that might be quicker? I realize the bottleneck is curl (as well as the speed of the remote server/dns servers) and that there isn't really a way around that. Is there another tool or technique I could use within my script to speed up this process?
I will still have to go through the active links one by one and analyze by hand but I don't think there is a good way of doing this programmatically that wouldn't consume more time than doing it by hand (if it's even possible).
Thanks

I know it's been awhile but I've found myself in need of this yet again. I've modified Xyne's script a little to work a little more consistently with my data. The problem I'm running into now is that urllib doesn't accept IRIs. No surprise there I suppose as it's urllib and not irilib. Does anyone know of any libraries that will convert an IRI to a URI? Here is the code I am working with:
#!/usr/bin/env python3
from threading import Thread
from queue import Queue
from urllib.request import Request, urlopen
from urllib.error import URLError
import csv
import sys
import argparse
parser = argparse.ArgumentParser(description='Check list of URLs for existence of link in html')
parser.add_argument('-d','--domain', help='The domain you would like to search for a link to', required=True)
parser.add_argument('-i','--input', help='Text file with list of URLs to check', required=True)
parser.add_argument('-o','--output', help='Named of csv to output results to', required=True)
parser.add_argument('-v','--verbose', help='Display URLs and statuses in the terminal', required=False, action='store_true')
ARGS = vars(parser.parse_args())
INFILE = ARGS['input']
OUTFILE = ARGS['output']
DOMAIN = ARGS['domain']
REMOVED = 'REMOVED'
EXISTS = 'EXISTS'
NUMBER_OF_WORKERS = 50
#Workers
def worker(input_queue, output_queue):
while True:
url = input_queue.get()
if url is None:
input_queue.task_done()
input_queue.put(None)
break
request = Request(url)
try:
response = urlopen(request)
html = str(response.read())
if DOMAIN in html:
status = EXISTS
else:
status = REMOVED
except URLError:
status = REMOVED
output_queue.put((url, status))
input_queue.task_done()
#Queues
input_queue = Queue()
output_queue = Queue()
#Create threads
for i in range(NUMBER_OF_WORKERS):
t = Thread(target=worker, args=(input_queue, output_queue))
t.daemon = True
t.start()
#Populate input queue
number_of_urls = 0
with open(INFILE, 'r') as f:
for line in f:
input_queue.put(line.strip())
number_of_urls += 1
input_queue.put(None)
#Write URL and Status to csv file
with open(OUTFILE, 'a') as f:
c = csv.writer(f, delimiter=',', quotechar='"')
for i in range(number_of_urls):
url, status = output_queue.get()
if ARGS['verbose']:
print('{}\n {}'.format(url, status))
c.writerow((url, status))
output_queue.task_done()
input_queue.get()
input_queue.task_done()
input_queue.join()
output_queue.join()
The problem seems to be when I use urlopen
response = urlopen(request)
with a URL like http://www.rafo.co.il/√ó‚Äò√ó¬®-√ó¬§√ó¬ê√ó≈ì√ó‚Ñ¢-p1
urlopen fails with an error like this:
Exception in thread Thread-19:
Traceback (most recent call last):
File "/usr/local/Cellar/python3/3.3.0/Frameworks/Python.framework/Versions/3.3/lib/python3.3/threading.py", line 639, in _bootstrap_inner
self.run()
File "/usr/local/Cellar/python3/3.3.0/Frameworks/Python.framework/Versions/3.3/lib/python3.3/threading.py", line 596, in run
self._target(*self._args, **self._kwargs)
File "./linkcheck.py", line 35, in worker
response = urlopen(request)
File "/usr/local/Cellar/python3/3.3.0/Frameworks/Python.framework/Versions/3.3/lib/python3.3/urllib/request.py", line 160, in urlopen
return opener.open(url, data, timeout)
File "/usr/local/Cellar/python3/3.3.0/Frameworks/Python.framework/Versions/3.3/lib/python3.3/urllib/request.py", line 473, in open
response = self._open(req, data)
File "/usr/local/Cellar/python3/3.3.0/Frameworks/Python.framework/Versions/3.3/lib/python3.3/urllib/request.py", line 491, in _open
'_open', req)
File "/usr/local/Cellar/python3/3.3.0/Frameworks/Python.framework/Versions/3.3/lib/python3.3/urllib/request.py", line 451, in _call_chain
result = func(*args)
File "/usr/local/Cellar/python3/3.3.0/Frameworks/Python.framework/Versions/3.3/lib/python3.3/urllib/request.py", line 1272, in http_open
return self.do_open(http.client.HTTPConnection, req)
File "/usr/local/Cellar/python3/3.3.0/Frameworks/Python.framework/Versions/3.3/lib/python3.3/urllib/request.py", line 1252, in do_open
h.request(req.get_method(), req.selector, req.data, headers)
File "/usr/local/Cellar/python3/3.3.0/Frameworks/Python.framework/Versions/3.3/lib/python3.3/http/client.py", line 1049, in request
self._send_request(method, url, body, headers)
File "/usr/local/Cellar/python3/3.3.0/Frameworks/Python.framework/Versions/3.3/lib/python3.3/http/client.py", line 1077, in _send_request
self.putrequest(method, url, **skips)
File "/usr/local/Cellar/python3/3.3.0/Frameworks/Python.framework/Versions/3.3/lib/python3.3/http/client.py", line 941, in putrequest
self._output(request.encode('ascii'))
UnicodeEncodeError: 'ascii' codec can't encode characters in position 5-8: ordinal not in range(128)
I'm not too familiar with how character encoding works so I'm not sure where to start. What would be a quick and dirty way (if one exists) to get URLs like this to play nicely with python's urlopen?

CSS Script for checking RADIUS Service

Hi,
We are using CSS 11501 boxes for load-sharing RADIUS (NAC) requests between different ACS Servers.
How can I configure a keepalive method for checking the RADIUS service on the ACS Servers ?
If this needs to be a script then Can anyone provide some hints\tips ?
Thanks,
Naman

This needs to be a script.
The best way would be to sniff a request/response from a known user [or fake user], then extract the udp header + payload in hex format, then create a CSS script to send the hex formatted query and to verify that the hex formatted response matches the server response.
I believe the ap-kal-dns script uses a similar approach so you can look at it to get an idea of what you have to do.
Gilles.

Script for checking the replication process in Netscape Directory Sever 4.1

Hi,
We are using Netscape Directory Server 4.1.6 in our production environment. Where we want to know is there any script available to check the replication process. Or can we write a script to check the process.
Waiting for your replies at the earliest.
Thanks,
Syed A.

Hi Syed,
Replication state is very easy to see in 4.x and earlier. The last changenumber in the supplier changelog is visible (on the root DSE IIRC), and each consumer suffix has an operational attribute "copiedfrom" that tells you the name of the supplier, the database generation id, and the last change replayed from the supplier.
So a script that compares the results of
ldapsearch -h <supplier> -s base -b "" "objectclass=*" lastchangenumber
and
ldapsearch -h <consumer> -s base -b <base_suffix> "objectclass=*" copiedFrom
will show you if a replica has fallen out of sync. It won't tell you more than how many changes behind the replica is, though, because pre-5.x changenumbers are sequential integers, not timestamps.
However, the change that corresponds to the changenumber is clearly visible under the "cn=changelog" suffix. So if you look at the change itself you can see the timestamp on it.
For more info on the status of replication, you should be able to query the agreements on the supplier. Those live under the "Netscape Machine Data Suffix", which you can also find on the supplier's root DSE:
ldapsearch -h <supplier> -s base -b "" "objectclass=*" netscapemdsuffix
And of course the error logs will usually tell you if replication is failing outright.
I may be off on some of the attribute names, but if you do some investigating along these lines, you should be able to figure it out.

Script for Checking the Server Status

Hi All,
I just need the script for monitoring the server status through the WLST.My scenario:I have 2 server in Running State.If any one of the server get failed or in not RUNNING state then i use the script for starting that server automatically.I tried some of the script but it is not working properly .If any one have the sample script please share with me.
Regards,
Ove.

Hi Syed,
Replication state is very easy to see in 4.x and earlier. The last changenumber in the supplier changelog is visible (on the root DSE IIRC), and each consumer suffix has an operational attribute "copiedfrom" that tells you the name of the supplier, the database generation id, and the last change replayed from the supplier.
So a script that compares the results of
ldapsearch -h <supplier> -s base -b "" "objectclass=*" lastchangenumber
and
ldapsearch -h <consumer> -s base -b <base_suffix> "objectclass=*" copiedFrom
will show you if a replica has fallen out of sync. It won't tell you more than how many changes behind the replica is, though, because pre-5.x changenumbers are sequential integers, not timestamps.
However, the change that corresponds to the changenumber is clearly visible under the "cn=changelog" suffix. So if you look at the change itself you can see the timestamp on it.
For more info on the status of replication, you should be able to query the agreements on the supplier. Those live under the "Netscape Machine Data Suffix", which you can also find on the supplier's root DSE:
ldapsearch -h <supplier> -s base -b "" "objectclass=*" netscapemdsuffix
And of course the error logs will usually tell you if replication is failing outright.
I may be off on some of the attribute names, but if you do some investigating along these lines, you should be able to figure it out.

Problem in Sap script for Check printing

Hi all,
I have problem in Check printing for FI Module. In Tcode f-58 i am taking the printout of checks. For my user they want to move the main window in upwards, but the sap script <b>F110_PRENUM_CHCK</b> not allowing to move upwards. how to do this, its urgent. plz
point wil be sure.
Gowri

Hi
Copy the script F110_prenum_chek to some ZCHECK and do the changes.
Why you can't change the MAIN window towards up?
You can changes ths ize of it by adjusting the setting of it .
generally we use some pre printed stationary for this in which all the line item data with doc numbers is printed on top and the check will be in bottom
and in check we just print the few fields in the right positions.
<b>Reward points for useful Answers</b>
Regards
Anji

Script for check table exeststance

Hi,
We have 20 instances
I want to create a shell script like
1. it will check existence of the table in dba schema
2. then will check existence of data in the table
Also send the mail to distro if table is not exits

I have created one script
Is it ok ?
#!/bin/ksh
for conn in `cat conn_mkt.lst`
do
mkt=`echo $conn |cut -d "/" -f1 | cut -b 1-3`
inst=`echo $conn |cut -d "@" -f2|cut -d "|" -f1`
owner=`echo $conn |cut -d "/" -f1`
rm -rf Log/check_table_${mkt}.log
rm -rf Log/check_count_${mkt}.log
sqlplus -s ****/****@${inst} <<EOF
set feed off verify on pages 200 echo on serveroutput on
spool Log/check_table_${mkt}.log
select table_name from dba_tables where owner='DBA' and table_name='USR_CONTROL_LOGIN';
spool off;
exit
EOF
if [ -s Log/check_table_${mkt}.log ]; then
sqlplus -s ****/****@${inst} <<EOF
set feed off verify on pages 200 echo on serveroutput on
spool Log/check_count_${mkt}.log
select count(1) from TLG_DBA.USR_CONTROL_LOGIN;
spool off;
exit;
EOF
mailx -s " Table USR_CONTROL_LOGIN is exists in $mkt `cat Log/check_count_${mkt}.log`" <email>
else
mailx -s I " Table USR_CONTROL_LOGIN is not exists in $mkt " <email>
done

Script for checking a box in safari menu?

how does one do this? What I'm looking for is a script that will open Safari and check the "Disable WebCore Caches" box on the "Show Caches Window" submenu in the "Debug" menu, and I'm totally out of my league...thanks
InteliMac Mac OS X (10.4.8)

Hi Dread
Had a lot of trouble figuring out where the "Debug" menu was for a start, only
to find it is a hidden menu within Safari, and to unlock it you need to do as the script says below.
Type the following into terminal, with Safari closed, then activate Safari
and theirs the "Debug" menu.
% defaults write com.apple.Safari IncludeDebugMenu 1
type the below with Safari closed to deactivate the "Debug" menu.
% defaults write com.apple.Safari IncludeDebugMenu 0
ok, got this far, just having a wee issue in getting the check box to change it's value to 1,
tell application "Safari"
activate
end tell
tell application "System Events"
tell process "Safari"
tell menu bar 1
tell menu bar item "Debug"
tell menu "Debug"
click menu item "Show Caches Window"
--click checkbox "Disable WebCore Caches" of menu item "Show Caches Window" of menu 1 of menu bar item "Debug" of menu bar 1
--or
set value of checkbox "Disable WebCore Caches" to 1
end tell
end tell
end tell
end tell
end tell
Budgie

Scripts for checking Windows Production Servers Disk Space

Hi Friends,
I am looking for some simple scripts (DOS Based or which can be run in restrictive env)by which I can get the Servers Disk Space statistics when I run it from my local machine. My L1 team members are responsible for verifying Disk Space primarily C and D:
everyday and they send status of the same by logging onto each and every servers. If I can get some simple scripts which can be run easily, that would be really helpful.
Thanx in Advance.
Keep Rocking :)
Saurabh

Hi,
You may want to check this script out from the TechNet Gallery.
http://gallery.technet.microsoft.com/PowerShell-Script-to-fa8305ea
Cheers.
Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Milton Goh
MCSE, MCSA, MCITP, MOF, ITIL, AIIM SharePoint Specialist
Blog |
Twitter

Script for checking hardware failures on Solaris

Similar Messages

Maybe you are looking for