Script Loading Problem Fixed!!!

Sunny Ladkani fixed the issue for me --as soon as I switched from Chrome to Firefox, I could open all my scripts. Hurrah!!!!!

Similar Messages

Loader-Problem mit I.Explorer / FireFox ist OK

Die Domain "http://woopi.net"
enthält eine "site", die nur mit Flash generiert wurde.
Teste ich diese "Site" mit Firefox, dann gibt es keine Probleme, alles OK.
Teste ich mit dem Internet-Explorer, dann muß dieser erst lernen mit den LoaderKomponenten umzugehen,
nach dem 2. oder 3. "rollOver" werden dann diese Elemente richtig angezeigt.
Ziel-Beschreibung:
beim Aufruf von "woopi.net" wird auf dem Bildschirm die Bundesrepublik dargestellt.
Ein Klick auf die BRD öffnet ein Navigationsfeld mit 7 Button.
Der Klick auf den Button "Alle Banken in Deutschland" öffnet ein Navigationsfeld, in welchem bei einem RollOver
unten links auf dem Bildschirm ein Bild angezeigt wird, in einer LoaderKomponente.
Der InternetExplorer zeigt diese Bilder falsch an, erst nach dem 2., ev. nach dem 3. RollOver wird das Bild richtig angezeigt.
Unten rechts auf dem Bildschirm gibt es den Zugang zu einem weiteren Navigationsfeld, "WebKatalog 2".
Die Darstellung in diesem Navigationsfenster ist geradezu scheußlich.
Hinweis:
auch die Html-Seiten in denen die Flash-Seiten eingebettet sind, wurden mit Flash-Cs4 generiert.
Es wurden keine ProgrammErweiterungen verwendet.
Wer kennt die Problemlösung?
mfG, Jochen

danke für die Information:
"you have incomplete swf embedding code"
Die Kompelation der html-Datei erfolgt unter Flash automatisch, ich habe leider
"fast keine" html-Kenntnisse, kann also nur laborieren. Können Sie mir einen Hinweis geben ?
cue.fla     "wurde kompelliert". Ergebnis:
cue.swf
cue.html
Hier das, was ich vorfand:
<body bgcolor="#e7e7e7">

<a href="./cue/queue2.swf"></a>
<a href="./cue/queue3.swf"></a>
<a href="javascript: end("document.cue");"></a>
<a href="http://www.basiszins.de"></a>
<a href="http://www.onvista.de"></a>


<script language="JavaScript" type="text/javascript">
    AC_FL_RunContent(
Es müßte vielleicht so aussehen:
<body bgcolor="#e7e7e7">

<a href="./cue/queue1.swf"></a>     //das Script in cue.swf:   loadMovieNum("./cue/queue1.swf", 1);
<a href="./cue/queue2.swf"></a>    //d.Script in queue1.swf: on (release){loadMovieNum("./cue/queue2.swf",2);}
                                                    //d.Script in queue2.swf:   loadMovieNum("./cue/queue10.swf", 3);
<a href="./cue/queue3.swf"></a>    //d.Script in queue1.swf:   on (release){loadMovieNum("./cue/queue3.swf",2);}
                                                   //d.Script in queue3.swf:    loadMovieNum("./cue/queue30.swf", 3);
<a href="javascript: end("document.cue");"></a>
<a href="http://www.basiszins.de"></a>
<a href="http://www.onvista.de"></a>


<script language="JavaScript" type="text/javascript">
    AC_FL_RunContent(
Das "Loader-Problem" zeigt sich aber schon in der "queue1.swf" Datei, welche nach _level1 geladen wird.
Es wird hier nur Actionscript 2 eingesetzt. Bemerkenswert ist, daß sich Firefox ohne Probleme sehr stabil verhält.
Vielleicht können Sie hiermit etwas anfangen. Wenn ein SreenShoot eine bessere Analyse ermöglicht, schiebe ich ein Bild gerne nach.
mfG. Jochen

Adobe Captivate 8 projects published to HTML 5 shows major loading problems and stops

Adobe Captivate 8 projects published to HTML 5 cause major loading problems in most browsers(IE 11, Chrome v. 35.0, Firefox v. 31). Loading… (screen)
The view stops after a while and only the Loading… (icon) can be seen on the page.
Is this a known problem with Captivate projects published to html5 and is there a way to fix it? What is wrong?
Test the html5 version of this project at: http://kurs.dokker.no/captivate/
and see for yourself what happends.

I changed the Preferences/Project/Start and End Preloader % to 25 and published the projects again. The course: http://kurs.dokker.no/captivate/elev/
stopped like before on one of the first slides, loading… screen like before in IE11.
In Chrome v. 37.0 the course worked badly, would not run, sound missing and buttons not working.
In Firefox 31.0 the course worked to a degree even if the program was advising to use another browser for this content.
In Opera 23.0 sound was missing and else working as bad as IE.
All this testes is done on a PC using Windows 8 connected på internet via ethernet, download speed: 66.57.
I would like to use the HTML5-format since it has a cleaner view than swf-files that appear to be jagged, but there is a lot missing before Adobe Captivates html5 publish is where it needs to be. Her are the complete html5 course and here are the swf based course for comparison.

Mail loading problem

Hi all
I've got this mail loading problem,
whenever the mail is loading I always scroll down to read the text first
but it always to back to the top, I scroll down again it scroll back up.
this happen only during the images are loading.
it is very annoying, though it might be fix in 10.5.7
but it was not.
any plan to solve this?

I have the same problem. Did you get any answers?

Sql loader problem - thread appears to be hung

Sorry to ask such a strang question but I am not sure which direction to go with this one. Hoping someone might have an idea.
I am running oracle 10g on windows. I have 3 servers all patched at the same levels. All 3 servers run a purchased utility called dbutility which copies data from a dms database to an oracle database using oracle's sql*loader. On one server the dbutility hangs when the dbutility program tries to start sql*loader. I must close the dos window to end the job - ctl c does not work.
If I let the job sit long enought, it eventually gets the message:"BULK LOADER thread appears to be hung: main thread waiting".
I called the company which supports the dbutility program and they think it is a windows or oracle problem.
I can get the dbutility to work if I start the dbutility in verbose (trace) mode. For some reason slowing the dbutility down before starting the sql*load program fixes the problem.
Has anyone ever had issues starting sql*loader?
Does anyone have any ideas what might be causing this problem?
Do you think reinstalling the sql*loader might help?
Thank you!
Confused:)

Try to built a test case on your own.
Make a little test creating an sql*loader ctl and try to load the file on a test table.
If that work you should ask againg with your tool support.
load data
infile 'YOUR_FILE_HERE'
badfile 'BAD_FILE'
append
into table test_ldr
fields terminated by "," optionally enclosed by '"'
(caracter1,caracter2,caracter3,caracter4,caracter5)
caraterN = your table column name.
sqlldr.exe userid=username/password@db rows=1000 control=conrtol.ctl log=log.log errors=200 direct=y

Javascript Script Loader

Is there a javascript script loader for plumtree? Everytime we update ptportal the version number of scripts change and the pages break. For example, the link of ptxml.js is imageserver\plumtree\common\private\js\jsxml\162331\ptxml.js. If we upgrade and 162331 becomes something else every page that uses it throws javscript errors.
I've seen a ptloader.js script used in some Adaptive portlet demos, but I can't find the file on the server, nor any documentation describing its use.
thanks,
jason

I am fetching all data at once and storing it in collection. I think following statement gets all data in collection, correct me if i am wrong.
Collection collection = (Collection)request.getAttribute(OmToProviderBO.OBJNAME);
I am using this JSP Page tag.tld to do paging, but i dont know how to do 1-100, 101-200. this paging .tld show link in the bottom with prev and next but when i click next it call my jsp page again and tries to get this
String state = (String)request.getAttribute(Constants.APPL_STATE);
and it gets null and goes into this if loop :
if (state == null || !state.equals(States.REALIGN_OM_TO_PROVIDER)) {
// Unauthorized source, redirect to parent Controller and let it handle it
out.println("Access violation!");
return;
And throw Access Violation. I dont know what to do to fix this so it does not get null. Isnt their a way just to go thru the collection rather than calling all this statements again when I click next.

Macbook Pro/Mozilla Firefox --Page Loading Problems

I experience 'page loading' problems when going from one page to another. Sometimes the page takes a long time to load. Sometimes it times out and never does load.
Does anyone else with this combination of laptop and browser experience these problems? Any suggestions for overcoming this lag?

I know OS X used to have some problems with the way some routers do DNS. There was this topic a while ago:
http://forums.verizon.com/t5/FiOS-Internet/DL-page-load-speed-great-but-browser-quot-looking-up-quot...
For our Mac we had to set the router to send external IP addresses of a DNS system (either verizon's or something like OpenDNS which we use).
You could manually change the DNS settings on the Mac to see if that fixes the problem and then you could mac the change the settings at the router level if you like.

IMac, sudden extremely slow webpage loading problem

Hi guys,
I had this problem all of a sudden, not sure whether it was caused by malware, my own python scripts or the 10.8.2 update. However all the other devices in my wifi network work just fine. And also my iMac is not disconnected from the internet, ping "www.google.com" is fine, and other IM apps are working properly too.
I tried different browswers (chrome, firefox, safari) since then, and all the other suggested solutions (resetting DNS, using static ip address, clear cache and etc.) None of them actually solved the problem.
My friend told me to reinstall a clean OS X, which could be a huge pain for me.
However, I accidently found out some softlinks and permissions are messed up in my superuser directories. So I did a "repair disk permission" , now the browsers are back on the horse. That actually makes sense to me.
Long story short, verify/repair disk permissions (in Utilities/disk utility) might solve your browser page loading problem! I just wanna to share with you guys if you are struggling on the same issue as I was.
Regards,
candyquicksort

Thanks for the report & sharing!

Partial page load problem when using Muse in an existing non-Muse Masterpage; how to issue a jquery

Partial page load problem when using Muse in an existing non-Muse Masterpage; how to issue a jquery args.get_isPartialLoad().
My page is loaded into a palcehold within the Ajax update panel within the current Masterpage, so page loadload doesn't occur. But if my Muse page can capture the partial pageload then I can tell jquery to run the Muse formating routine.

Jackie, I am having the same issue and agree that it obscures our site analytics.
I only have the "WebMarketing" subscription - so I cannot see how often people visit my site (unless I just dont know how to view that). Here is a screen shot of how many different locations I have and how much it affects my site visitor count based on the other locations which seem "legit" because they have more page views than visits.
I hope there is a way to fix or block this.

When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?

When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?

Hello, ksb2.
Thank you for visiting Apple Support Communities.
We are investigating this issue. This article will be updated as more information becomes available.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
Cheers,
Jason H.

Flat-File Loading problem

Hi Friends,
I am struggling with flat-file loading problem. I am trying to load a .csv file into data target. I took all pre-cautions while loading data. I look into preview and simulate the data. Everything is ok, but when i schedule the data, i found 0 records in the monitor. The following is the STATUS message of the above problem:
   No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
         Can anybody help me what is the problem and procdure to resolve it?
Regards,
Mahesh

Hi Eugene,
Thanks for the quick reply. The following screen-shot tells you the messages of detail tab;
OVER ALL STATUS MISSING WITH MESSAGES OR WARNINGS
REQUEST: MISSING MESSAGES
EXTRACTION
EVERYTHING IS OK
DATA REQUEST RECEIVED
NO DATA AVAILABLE DATA ELECTION ENDED.
PROCESSING
NO DATA
           The above message was shown in details tab. Pls guide me to locate the problem.
Regards,
Mahesh

Does Mavericks have the problem fixed with working with the Dell UltraSharp U3014 30 inch monitor?

Does Mavericks have the problem fixed with working with the Dell UltraSharp U3014 30 inch monitor?

I have this (or a similar) issue and I did notice something interesting. After I boot into Windows via Bootcamp (where I have the U3014 specfic driver installed) and then reboot into MacOS X (Mavericks) the monitor works flawlessly.
I would hazard a guess that this means bootcamp is retaining the driver used in Windows. Kind of the reverse of the TB GBE adapter driver issue.
To explain my issue for anyone else: the monitor flicks on and off as if the connection was poor. Connecting via HDMI. Connection is fine and as stated, everything works fine in Bootcamp.

App keeps loading problem solve

Anyone with an app still loading problem can get rid of it by going into the app store. tap on "updates"- bottem right corner. tap on purchased where you get a list of your downloads then tap on the cloud with the arrow, enter your pin. hit ok for app over 20mb. go back into the app store and to your purchased list and wait for it to reload. once done come out of the app store and hopefully all the loading apps are gone. hope it works for you.

I had this same problem when trying to download some training app. I could not delete or get it to upload completely either. Very frustrating. What I did was plug it into my computer, went to Itunes and searched the same app. I was able to download it here and then it starte to sync with my Iphone. You can remove the app after it finishes the download if u want. Hope this works!

I have problem " verify your emal " i can't change account , i removed application and instell again , same problem fix email and " verify email"

i have problem " verify your emal " i can't change account , i removed application and instell again , same problem fix email and " verify email"

The Email ID provided here has CC registered to it in active status. The Email also stands verified. Are you using any other Email ID ?
Let me know if you are facing issue regarding verification by activating the Cc with the email ID provided here.
Regards
Rajshree

Nested PowerShell script loads incorrect assembly

I have a Powershell script that is being used to provision Azure resources.
Let us call this script A.
In this script I invoke another script called Script B.
I use a statement like this:
.\scriptb param1 param2 param3 param4
Inside Script B
I have the following code that loads Microsoft.Servicebus.dll
Packages directory has version 2.6.0.0 of Microosft.ServiceBus.dll
$scriptPath = Split-Path (Get-Variable MyInvocation -Scope 0).Value.MyCommand.Path
$packagesFolder = (Split-Path $scriptPath -Parent) + "\packages"
$assembly = Get-ChildItem $packagesFolder -Include "Microsoft.ServiceBus.dll" -Recurse
Add-Type -Path $assembly.FullName
Assembly is loaded successfully.
If I invoke .\ScriptA which in turn calls Script B for some reason a very old version of Microsoft.ServiceBus.dll is loaded.
However If I invoke ScriptB directly the PowerShell command prompt correct version of Microsoft.ServiceBus.dll is loaded.
In each case exact same code is being executed. However for some reason calling the ScriptB directly seems to work but calling it from ScriptA loads the wrong version of Microsoft.ServiceBus.dll
What is difference between calling a script from Powershell command prompt as compared with calling it from another script.
I am hoping somebody can help me debug this issue.
Thanks
Raj
Integration Architect

Thanks for making the suggestion.
I did print the packagesFolder and scriptPath as you suggested.
Correct path is printed in either case. Assembly is also loaded in both cases
However for some reason a very old assembly is loaded when I call scriptb from scripta.
Write-Output "Adding the [Microsoft.ServiceBus.dll] assembly to the script..."
$scriptPath = Split-Path (Get-Variable MyInvocation -Scope 0).Value.MyCommand.Path
Write-Host "SCRIPTPATH:$scriptPath" -fore green
$packagesFolder = (Split-Path $scriptPath -Parent) + "\packages"
Write-Host "PACKAGE:$packagesFolder" -fore green
$assembly = Get-ChildItem $packagesFolder -Include "Microsoft.ServiceBus.dll" -Recurse
Add-Type -Path $assembly.FullName
Write-Output $assembly.FullName
Write-Output $assembly.VersionInfo
Write-Output "The [Microsoft.ServiceBus.dll] assembly has been successfully added to the script."
====== script output ==================
Adding the [Microsoft.ServiceBus.dll] assembly to the script...
SCRIPTPATH:C:\Projects\Fusion\DACCAR POC\src\Provisioning
PACKAGE:C:\Projects\Fusion\DACCAR POC\src\packages
C:\Projects\Fusion\DACCAR POC\src\packages\WindowsAzure.ServiceBus.2.6.5\lib\net40-full\Microsoft.ServiceBus.dll
Comments :
CompanyName : Microsoft Corporation
FileBuildPart : 50410
FileDescription : Microsoft.ServiceBus.dll
FileMajorPart : 2
FileMinorPart : 6
FileName : C:\Projects\Fusion\DACCAR
POC\src\packages\WindowsAzure.ServiceBus.2.6.5\lib\net40-full\Microsoft.ServiceBus.dll
FilePrivatePart : 0
FileVersion : 2.6.50410.0
InternalName : Microsoft.ServiceBus
IsDebug : False
IsPatched : False
IsPrivateBuild : False
IsPreRelease : False
IsSpecialBuild : False
Language : English (United States)
LegalCopyright : Copyright (c) Microsoft Corporation. All rights reserved.
LegalTrademarks : Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in
the U.S. and/or other countries.
OriginalFilename : Microsoft.ServiceBus.dll
PrivateBuild :
ProductBuildPart : 50410
ProductMajorPart : 2
ProductMinorPart : 6
ProductName : Microsoft® Service Bus
ProductPrivatePart : 0
ProductVersion : 2.6.50410.0
SpecialBuild :
The [Microsoft.ServiceBus.dll] assembly has been successfully added to the script.
Integration Architect

Script Loading Problem Fixed!!!

Similar Messages

Maybe you are looking for