Script path not used / set serveroutput

i set the directory in
database -> worksheet to the same directory like my sqplus SQLPATH.
but it looks like the worksheet is not use the directory entry.
when i start the script with the full pathname its working.
but ... then sqldeveloper tell me
ignore set serveroutput on... is ignored.... but no result is shown....
Version : 1.1.0.21
Build : Main-21.41
OS is Linux
Message was edited by:
ojehle

The preference for the path is not working, this is a bug and is logged.
For set server output: The output is written to the DBMS Output tab and you need to use the toggle on that screen to set server output on.
Sue

Similar Messages

Using SET SERVEROUTPUT ON in procedure

Hi,
Can I use SET SERVEROUTPUT ON inside a procedure. The reason is I am building a procedure in Toad and will execute in SqlPlus. In future I will only use SqlPlus to execute and view my result.

No.
Although you can use DBMS_OUTPUT.ENABLE, it only re-enables output that was previously disabled (with DBMS_OUTPUT.DISABLE). It does not alter the current SQL*Plus SERVOUTPUT setting.
For example,
SQL> set serveroutput on size 1000000
SQL>
SQL> begin
2      dbms_output.enable(1000000);
3      dbms_output.put_line('Eat more bananas');
4 end;
5 /
Eat more bananas
PL/SQL procedure successfully completed.
SQL> set serveroutput off
SQL>
SQL> r
1 begin
2      dbms_output.enable(1000000);
3      dbms_output.put_line('Eat more bananas');
4* end;
PL/SQL procedure successfully completed.
SQL> show serverout
serveroutput OFF

Do Not Use Set-up Cartridge Message

I just changed all the cartridges in my HP Officejet Pro 8600. Now the error message "DO NOT USE SET-UP Cartridges" is on the screen. I have turned machine off, unplugged power, double checked cartridges (which are NOT set-up cartridges", and NADA. What next??? Thanks....

@merhulin
Any luck if you reset the printer?
Press the Power button () to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button () to turn it on
SETUP Cartridges
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03077159
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Error using SET SERVEROUTPUT ON command

HI,
I am using Hudson configuration tool for automated deployment.The script was running successfully without spool command,but when i use these commands i got below exception.
spool file1_select.log
SET SERVEROUTPUT ON;
DECLARE
l_vc_user VARCHAR2 (50);
BEGIN
SELECT USER INTO l_vc_user FROM DUAL;
DBMS_OUTPUT.put_line ('CURRENT USER IS : ' || l_vc_user);
SELECT global_name INTO l_vc_user FROM global_name;
DBMS_OUTPUT.put_line ('CURRENT DB IS : ' || l_vc_user);
END;
select systimestamp from dual;
select systimestamp from dual;
spool off;
we are getting the exception when executing using the java plugin.
“ERROR] Failed to execute: /* Formatted on 4/18/2012 4:36:12 PM (QP5 v5.126) */ spool file1_select.log SET SERVEROUTPUT ON
[ERROR] java.sql.SQLException: ORA-00900: invalid SQL statement
How to proceed the scripts with these commands in java plugin .Is there any other way to resolve it. Please do the needful.
Edited by: 927851 on Apr 19, 2012 3:34 AM
Edited by: 927851 on Apr 19, 2012 4:15 AM

Try to put serveroutput statement before spool statement.
Hope it helps you,
Fabrizio

Print Shortcut does not use set Print Defaults

Hi there!
I have a question regarding using the Print Command in Mac's version of Office. I will try my best to describe the issue.
I have a user who wants his default print settings to include 1-sided printing. If he goes and sets up the feature like that and then saves those settings as his default print settings it prints 1-sided printouts when he selects File>Print or Cmd>Print. It does not print 1-sided however, if he selects the Print Command shortcut (the little printer button shortcut).
I attempted to remove the shortcut and re-add it, being sure to select the shortcut whose description included using the default print settings but it still won't work. Anyone seen this before? Any thoughts?
Thanks!

Hmmm, wondering what I was thinking now... I don't see a way to set double sided there!?
I guess you're stuck using CMD+p, if that works.

Relative paths not used in the same way for flv and mp3

When I load an mp3 using the
Sound component, with the relative path "medias/test.mp3",
it works.
When I try to load a flv using the
VideoDisplay component, with the relative path
"medias/test.flv", it doesn't work!
VideoDisplay seems to build the path to the flv
from the directory where the .swf is, not from where the
webpage is...
Webpage is : /blabla/index.html
Swf path is: /blabla/swf/main.swf
Medias path: /blabla/medias/...
Is there a way to tell the VideoDisplay component to load a
relative path starting at the level where the webpage is?
Thanks in advance!

"[email protected]" <[email protected]>
wrote in message
news:gdilgt$qku$[email protected]..
> When I load an mp3 using the
Sound component, with the relative
> path
> "medias/test.mp3", it works.
>
> When I try to load a flv using the
VideoDisplay component, with the
> relative path "medias/test.flv", it doesn't work!
>
> VideoDisplay seems to build the path to the flv
from the directory
> where
> the .swf is, not from where the webpage is...
>
> Webpage is : /blabla/index.html
> Swf path is: /blabla/swf/main.swf
> Medias path: /blabla/medias/...
>
> Is there a way to tell the VideoDisplay component to
load a relative path
> starting at the level where the webpage is?
Relative paths are_always_ relative to the swf, regardless of
the media
type. Note that media is actually _already_ plural ;-).
So try:
"./medias/test.flv"
or possibly
"../medias/test.flv"

Photoshop not using set amount of ram. Stuck at 6gb

Hey guys, just recently started having issues with photoshop not getting the set amount of ram that it needs. I have it set to use 24gb of Ram (I have 32gb) Tried a reset, tried resetting back to factory then back, nothing. The odd thing is that if I set it to use only 1 gb of ram, it still idles at 6gb. Any tips on how to approach this would be greatly appreciated as I have projects on the run that require much attention.
Thanks.

Mac or Win?
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

2.1 RC1 - Pure performance when Preferences.Worksheet."script path" is used

When I fill out the "Select default path to look for scripts" text box on the Worksheet page in Preferences, I expirience very bad performance when I type in sql statements.
If I clear the text box agian, I have normal performance.

Bug already logged from duplicate posts from other users.
-Turloch

SET SERVEROUTPUT ON............... its not working for me on oracle 9i.

hi, i have used SET SERVEROUTPUT ON , in my plsql but i am unable to see the output after the execution , iam using oracle 9i any reason for not displaying..

DECLARE
V_Empno     NUMBER(4)     :=     &EnterEmpNo;
V_Ename          VARCHAR2(30);
V_Deptno     NUMBER(2);
V_Job          VARCHAR2(30);
V_MGR          NUMBER(4);
V_HireDate     DATE;
V_Sal          NUMBER(7,2);
V_Comm          NUMBER(7,2);
BEGIN
     SELECT
     Ename, Deptno, Job, MGR, HireDate, Sal, Comm
     INTO
     V_Ename, V_Deptno, V_Job, V_MGR, V_HireDate, V_Sal, V_Comm
     FROM Emp
     WHERE Empno = V_Empno;
DBMS_OUTPUT.PUT_LINE('The Details of Employee Number '||V_Empno||' Requested by You Are ...');
DBMS_OUTPUT.PUT_LINE('The Employee Name : '||V_Ename);
DBMS_OUTPUT.PUT_LINE('The Department Number : '||V_Deptno);
DBMS_OUTPUT.PUT_LINE('The Designation : '||V_Job);
DBMS_OUTPUT.PUT_LINE('The Manager Number : '||V_MGR);
DBMS_OUTPUT.PUT_LINE('The Joining Date : '||V_HireDate);
DBMS_OUTPUT.PUT_LINE('The Basic Salary : '||V_Sal);
DBMS_OUTPUT.PUT_LINE('The Commission Earned : '||V_Comm);
END;
/

SQL Developer 1.5.3: SIZE honored in SET SERVEROUTPUT ON SIZE nbr ?

I'm running some PL/SQL in SQL Developer 1.5.3 and am getting some buffer overflow error messages while using dbms_output.put_line.
At the top of my script, I've put:
set serveroutput on size 100000
But get these errors:
ORA-20000: ORU-10027: buffer overflow, limit of 20000 bytes
ORA-06512: at "SYS.DBMS_OUTPUT", line 35
ORA-06512: at "SYS.DBMS_OUTPUT", line 198
ORA-06512: at "SYS.DBMS_OUTPUT", line 139
ORA-06512: at line 28
Does SQL Developer 1.5.3 not, in fact, honor the SIZE portion of SET SERVEROUTPUT ON? If not, can this be set in the preferences? (couldn't find it).
Thanks.
Dana

Dana N wrote:
Note... I'm running Oracle 9i, soon to be 10g. Don't know if that matters. Seems in 11g, there's another way to set the buffer size specifically for dbms_output, e.g. dbms_output.enable(100000)-- or null for unlimited. I couldn't get this to work on 9i.
Danadbms_output.enable(buffer_size) has been available since 9i if not before.

Set "serveroutput on" for the current session.

I'm still new to PL/SQL and I use "*SET SERVEROUTPUT ON SIZE 100000"* always before I run a PL program block to get dbms_output. I really need to know why should we specify a size in this line & what that size will be applied for. Also I need to know whether there is any possibility to set serveroutput enabled for the current session, rather than running this code line before each and every PL block.
I Tried *"ALTER SESSION SET SERVEROUTPUT ON SIZE 1000000"* ; But it was not successfully executed.
Thanks!

michaels2 wrote:
I will have to always write it above my PL block, and run this line with that PL block.before the first dbms_output call you can also issue dbms_output.enable() :
declare
my_var varchar(30);
begin
my_var:='&input';
dbms_output.enable();
for i in 1..5 loop
dbms_output.put_line('Hello '||my_var);
end loop;
end;
/This should always work, irrespective of how you SET SERVEROUT in sql*plus.Nope.
SQL> ed
Wrote file afiedt.buf
1 begin
2 dbms_output.enable();
3 dbms_output.put_line('TEST');
4* end;
SQL> /
PL/SQL procedure successfully completed.
SQL>dbms_output.enable is used to enable the output buffer (or set the size of it) on the server side of things. It can't influence the client application into retrieving and displaying the output from the buffer, even if that is SQL*Plus. ;)

My website is telling users to install a flash/shockwave plug in but my site does not use either.

Like I said in the title we are getting the pop up bar asking users to install a flash plug in but there are not any flash objects on our site. I did an experiment and I found when I disable the shockwave plug-in on a machine that has it installed I get the pop-up and when I enable it on a machine that has it installed the pop-up goes away. I think I might have pin pointed the problem to a tracking script because when I remove the script the website does not ask for a plug-in. I contacted the people who made the script and they told me their script does not use flash in anyway. Does anyone have any idea why our useres are being asked to install the plug-in?
Here is the pop-up:

Do you have any advertising on the site that could be using shockwave? If not the script you mention must somehow be using it somehow, you have even confirmed this removing it and there is no prompt.
What happens if you try it using another browser such as Firefox?
regards
Mike

SET SERVEROUTPUT ON TOAD

hi
how can I use "SET SERVEROUTPUT ON" clause on toad

Same as you would in SQL*Plus: Simply type SET SERVEROUT ON in the SQL editor and run with F5.
Alternatively there's a button on the DBMS_OUTPUT desktop panel which should light up green. Output will then be generated when the statement is run with F9.

Setting field to NULL using script does not work

Hi,
This is a Hibernate and Oracle SQL developer-related question.
My application uses salesmeeting with customers and an officer. When the salesmeeting is active, OfficerID is set to the salesmeeting. If the officer closes the salesmeeting, officerID shall be set to NULL. Now, sometimes when explorer doesn't close correctly, the OfficerID is still set in the database. So, when another officer tries to login to the salesmeeting it's is locked by the first officer because only one officer at the time can access a salesmeeting.
Now to the problem: I'm trying to develop a script which simply updates the database and sets the officerID for a specific salesmeeting to NULL in order to "unlock" that salesmeeting.
The script looks like this:
UPDATE SALESMEETING SET OFFICERID = NULL
WHERE OFFICERID = 'XXXXX' AND SALESMEETINGID = '12345'
I commit the changes and OfficerID is set to NULL or (null) as it looks is SQL developer.
When logging in to the application, officerID is set to the active officer, so far so good. But, when running the Hibernate method saveOrUpdate() for the salesmeeting, the server hangs and nothing happens.
The thing is, when I manually set officerID to NULL by simply leaving the field blank, saveOrUpdate() works perfectly fine.
The third way of setting trying to set the value to null, by manually setting officerID
by typing (null) in the field generates another problem (I guess this is interpreted as the String "(null)")?
So, what I am wondering is what my script does wrong, is it not really setting officerID to NULL or is there something I need to understand about Hibernates saveOrUpdate()?
Thanks!
Message was edited by:
user615023

Hi,
To set a column to null, you have written right script.
Please make sure that 'null' & null are entirly different thing.
may be when system get hang, you might have written 'null' in stead of null.
Thanks.

How can I set a polygon's path by using the .add() function?

I have been searching the web and this forum and doing plenty of experimenting, and I can't for the life of me figure out how to do this.
I can set other attributes of a polygon inside the add() parentheses, such as the fillColor, but I can't set the polygon's path's pathPoints unless I use a separate line of code after the add(); line.
My script adds a great deal of polygons in a row, so halving the number of operations would greatly help me, and also it seems that some properties such as appliedObjectStyle cannot be set until after a polygon's path is defined. That means I need a third line of code after add() and entirePath=, which slows me down even more.
Help?

Ryan, I think you need to reset and take a moment to understand what it is that is going on here.
The things you've proposed that don't work shouldn't work, and it's all quite simple.
Generally speaking, a .add() function takes an additional parameter, a JavaScript Object, that list properties of the created object that can be set.
A JavaScript Object is a list of key/value pairs, just like an associative array in a language like perl, or a dictionary in a language like Python. It is expressed in curly braces as such:
{ key1: value1, key2: value2, key3: value3}
So, for any such general add function, these
foo = whatever.add();
foo.bar = baz;
are equivalent to this:
foo = whatever.add({bar: baz});
Are you with me? So, for instance, you had originally asked why you could not use pathPoints in polygons.add() and the answer is simpe. You cannot set polygon.pathPoints, because there is no .pathPoints property of a polygon.
So, when you want to try add properties inside properties, you must do as as objects within objects, and follow the strict hierarchy. Marc advises that this works:
app.activeWindow.activePage.polygons.add({
    fillColor:"FireRed",
    transparencySettings: {dropShadowSettings: {angle:120}}
and if indeed that is so, then the extension for setting multiple transparencySettings should be clear. It is not this, that you propose:
app.activeWindow.activePage.polygons.add({
    fillColor:"FireRed",
    transparencySettings: {dropShadowSettings: {angle:120}}
    transparencySettings: {dropShadowSettings: {distance:1}}
Because to do so is to set the transparencySettings key twice in the same Object. And to do that is to replace the first with the second. The above (yours) is wholly equavelent to:
app.activeWindow.activePage.polygons.add({
    fillColor:"FireRed",
    transparencySettings: {dropShadowSettings: {distance:1}}
If you wish to set more than one attribute of dropShadowSettings, you must set transparencySettings to an object containing one and only one dropShadowSettings, and you must do it only once. So it is this:
app.activeWindow.activePage.polygons.add({
    fillColor:"FireRed",
    transparencySettings:
      {dropShadowSettings: {angle:120, distance: 1}}
I am not sure why you thought you should have the name of the key in the Object named properties. That is probably because in some cases you can use:
foo.properties = { a: 1, b: 2};
as a shorthand for
foo.a=1;
foo.b=2;
but you would [probably] never want to mix that with the object notation for setting multiple properties in the .add() function.
Does this help to clarify?
As for your last question:
Also, it doesn't let me use square brackets or parentheses inside the add() parentheses, so the original problem I posted (trying to set a polygon's path) is still a problem.
It's not about the use of brackets or parentheses, but what they mean and where they go. As you have not posted an example of setting the polygon's path the long way, it's hard to show you how to shorten it. Post what you have that works, and we will show you how to shorten it. (I suppose some with more patience than I are willing to go look up what we think it is you are trying to do, and then interpret it. But I would much rather you show me the code you have that works, and then your attempts to transform or shorten it and change its notation. This makes it much much easier to help you, and it should also make the help more effective, by contextualizing it. As an added benefit, when someone else reads your post and tries to learn from it, they will gain more.)
So again, please provide a clear example of the "long way" to do the thing you are attempting, and then your attempt at shortening it.

Script path not used / set serveroutput

Similar Messages

Maybe you are looking for