Script to Create User and Add profiles

Instead of using the ODI 10g GUI Console to create users and add them to a profile, Can this task be achieved by scripting ? Either by wlst or JMX or Java Packages ? Please advise and guide me.
-Thanks,

Is there any other way for adding Bulk users and assigning them to a profile? Any thoughts Please
Versions: 10.1.3.5 and 10.1.3.6

Similar Messages

Need a script to Create Users and assign Responsibilty

Hi,
EBS R12
DB 10.0.2.4
I need to create 100 application users and assign a responsibilty with them.I do not want to create a single user everytime using sysadmin responsibilty.Give some idea about it.
Thanks

Use FND_USER_PKG API.
Please see old threads for similar discussion -- http://forums.oracle.com/forums/search.jspa?threadID=&q=FND_USER_PKG&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Create User and Add to Group in a single call using ActiveADAPTER

Hi Folks, I can successfully create a user in a specific OU and I can subsequently add the user to a Group within another OU using two sequential calls with ActiveADAPTER's one-way send functionality. Has anyone successfully done this in a single call
or am I limited because that would require two Directives statements?
Thanks!

Some thoughts:
Operations against AD are single action natively, because LDAP is I'd assume. The adapter likely follows that pattern.
Support for multiple operations would be noticable in the schemas either by a high level repeating structure or something like composite operations.
What does their support say?
[email protected]

Modify Script to Create User Role on Single Database.

Hi All,
Below is the script to create user role on database. Here problem is when I execute this script, it creates user role for all database within an instance and I want it to create user role only on 2 database say TEST1 and TEST2
Can anyone help me to modify the script?
--===================================================================================
-- Description
-- Database Type: MSSQL
-- This script creates a role called 'gdmmonitor' for ALL databases.
-- It grants some system catalogs to this role to allow Classification and Assessment on the database.
-- It then adds a user called "sqlguard" to all databases and grants this user gdmmonitor role.
-- before runnign this script
-- you MUST CREATE A SQL LOGIN CALLED 'sqlguard'
-- This sqlguard login doesn't need to be added to any database or given
-- any privilege. The script will take care of that.
-- Note:
-- If you wish to use a different login name (instead of 'sqlguard') you need to change
-- the value of the variable '@Guardium_user' in the script below;
-- (Look for the string: "set @Guardium_user = 'sqlguard'" and replace the 'sqlguard')
-- after runnign this script
-- Nothing to do, the script already creates the db user
-- User/Password to use
-- User: sqlguard (or any other name, if changed)
-- Pass: user defined
-- Role: gdmmonitor
--===================================================================================
PRINT '>>>==================================================================>>>'
PRINT '>>> Creating role: "gdmmonitor" at the server level.'
PRINT '>>>==================================================================>>>'
-- Change to the master database
USE master
-- *** If a different login name is desired, define it here. ***
DECLARE @Guardium_user AS varchar(50)
set @Guardium_user = 'sqlguard'
DECLARE @dbName AS varchar(256)
DECLARE @memberName AS varchar(256)
DECLARE @dbVer AS nvarchar(128)
SET @dbVer = CAST(serverproperty('ProductVersion') AS nvarchar)
SET @dbVer = SUBSTRING(@dbVer, 1, CHARINDEX('.', @dbVer) - 1)
IF (@dbVer = '8') SET @dbVer = '2000'
ELSE IF (@dbVer = '9') SET @dbVer = '2005'
ELSE IF (@dbVer = '10') SET @dbVer = '2008'
ELSE IF (@dbVer = '11') SET @dbVer = '2012'
ELSE SET @dbVer = '''Unsupported Version'''
IF (@dbVer != '2000')
BEGIN
-- This privilege is required to peform a specific MSSQL test.
-- Test name: SQL OLEDB disabled (DisallowAdhocAccess registry key)
-- Procedure execute: EXEC master.dbo.sp_MSset_oledb_prop
-- Purpose: To display provider property, not changing anything.
PRINT '==> Granting MSSSQL 2005 and above setupadmin server role'
EXEC master..sp_addsrvrolemember @loginame = @Guardium_user, @rolename = N'setupadmin'
END
SELECT @dbName = DB_NAME()
PRINT '==> Starting MSSql ' + @dbVer + ' role creation on database: ' + @dbName
-- find any members of the role if they exist
CREATE TABLE #rolemember (membername VARCHAR(256) NOT NULL)
INSERT INTO #rolemember
SELECT DISTINCT usr.name FROM dbo.sysusers usr, .dbo.sysmembers mbr
WHERE usr.uid = mbr.memberuid
AND mbr.groupuid = (SELECT uid FROM .dbo.sysusers WHERE name = 'gdmmonitor')
-- Drop the Role Members If they exist
IF EXISTS (SELECT count(*) FROM #rolemember)
BEGIN
PRINT '==> Dropping the gdmmonitor role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Dropping member: ''' + @memberName + ''''
exec('EXEC sp_droprolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- drop the role if it exists
IF EXISTS (SELECT 1 FROM .dbo.sysusers WHERE name = 'gdmmonitor')
BEGIN
PRINT '==> Dropping the role gdmmonitor on: ' + @dbName
exec sp_droprole 'gdmmonitor'
END
-- Create the role
PRINT '==> Creating the role gdmmonitor on: ' + @dbName
exec sp_addrole 'gdmmonitor'
-- Grant select privileges to the role for MSSql Common
PRINT '==> Granting common SELECT privileges on: ' + @dbName
GRANT SELECT ON dbo.spt_values TO gdmmonitor
GRANT SELECT ON dbo.sysmembers TO gdmmonitor
GRANT SELECT ON dbo.sysobjects TO gdmmonitor
GRANT SELECT ON dbo.sysprotects TO gdmmonitor
GRANT SELECT ON dbo.sysusers TO gdmmonitor
GRANT SELECT ON dbo.sysconfigures TO gdmmonitor
GRANT SELECT ON dbo.sysdatabases TO gdmmonitor
GRANT SELECT ON dbo.sysfiles TO gdmmonitor
GRANT SELECT ON dbo.syslogins TO gdmmonitor
GRANT SELECT ON dbo.syspermissions TO gdmmonitor
-- Grant execute privileges to the role for MSSql Common
PRINT '==> Granting common EXECUTE privileges on: ' + @dbName
GRANT EXECUTE ON sp_helpdbfixedrole TO gdmmonitor
GRANT EXECUTE ON sp_helprotect TO gdmmonitor
GRANT EXECUTE ON sp_helprolemember TO gdmmonitor
GRANT EXECUTE ON sp_helpsrvrolemember TO gdmmonitor
GRANT EXECUTE ON sp_tables TO gdmmonitor
GRANT EXECUTE ON sp_validatelogins TO gdmmonitor
GRANT EXECUTE ON sp_server_info TO gdmmonitor
-- Check if the version is 2005 or greater
IF (@dbVer != '2000')
BEGIN
-- Grant select privileges to the role for MSSql 2005 and above
PRINT '==> Granting MSSql 2005 and above SELECT privileges on: ' + @dbName
GRANT SELECT ON sys.all_objects TO gdmmonitor
GRANT SELECT ON sys.database_permissions TO gdmmonitor
GRANT SELECT ON sys.database_principals TO gdmmonitor
GRANT SELECT ON sys.sql_logins TO gdmmonitor
GRANT SELECT ON sys.sysfiles TO gdmmonitor
GRANT SELECT ON sys.database_role_members TO gdmmonitor
GRANT SELECT ON sys.server_role_members TO gdmmonitor
GRANT SELECT ON sys.configurations TO gdmmonitor
GRANT SELECT ON sys.master_key_passwords TO gdmmonitor
GRANT SELECT ON sys.server_principals TO gdmmonitor
GRANT SELECT ON sys.server_permissions TO gdmmonitor
GRANT SELECT ON sys.credentials
TO gdmmonitor
--This is called by master.dbo.sp_MSset_oledb_prop.
--By defautl it should have already been granted to public.
GRANT EXECUTE ON sys.xp_instance_regread TO GDMMONITOR
GRANT EXECUTE ON sys.sp_MSset_oledb_prop TO GDMMONITOR
END
-- Re-add the dropped members
IF EXISTS (SELECT 1 FROM #rolemember)
BEGIN
PRINT '==> Re-adding the role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Re-adding member: ''' + @memberName + ''''
exec('EXEC sp_addrolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- END of role creation on database
PRINT '==> END of role creation on: ' + @dbName
PRINT ''
-- Change to the msdb database
USE msdb
set @memberName = ''
SELECT @dbName = DB_NAME()
PRINT '==> Starting MSSql ' + @dbVer + ' role creation on database: ' + @dbName
-- find any members of the role if it exists
TRUNCATE TABLE #rolemember
INSERT INTO #rolemember
SELECT DISTINCT usr.name FROM .dbo.sysusers usr, .dbo.sysmembers mbr
WHERE usr.uid = mbr.memberuid
AND groupuid = (SELECT uid FROM .dbo.sysusers WHERE name = 'gdmmonitor')
-- Drop the Role Members If they exist
IF EXISTS (SELECT count(*) FROM #rolemember)
BEGIN
PRINT '==> Dropping the gdmmonitor role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Dropping member: ''' + @memberName + ''''
exec('EXEC sp_droprolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- drop the role if it exists
IF EXISTS (SELECT 1 FROM .dbo.sysusers WHERE name = 'gdmmonitor')
BEGIN
PRINT '==> Dropping the gdmmonitor role on: ' + @dbName
exec sp_droprole 'gdmmonitor'
END
-- Create the role
PRINT '==> Creating the gdmmonitor role on: ' + @dbName
exec sp_addrole 'gdmmonitor'
-- Grant select privileges to the role for MSSql Common
PRINT '==> Granting common SELECT privileges on: ' + @dbName
GRANT SELECT ON dbo.sysobjects TO gdmmonitor
GRANT SELECT ON dbo.sysusers TO gdmmonitor
GRANT SELECT ON dbo.sysprotects TO gdmmonitor
GRANT SELECT ON dbo.sysmembers TO gdmmonitor
GRANT SELECT ON dbo.sysfiles TO gdmmonitor
GRANT SELECT ON dbo.syspermissions TO gdmmonitor
GRANT SELECT ON dbo.backupset TO gdmmonitor
-- Check if the version is 2005 or greater
IF (@dbVer != '2000')
BEGIN
-- Grant select privileges to the role for MSSql 2005 and above
PRINT '==> Granting MSSql 2005 and above SELECT privileges on: ' + @dbName
GRANT SELECT ON sys.all_objects TO gdmmonitor
GRANT SELECT ON sys.database_permissions TO gdmmonitor
GRANT SELECT ON sys.database_principals TO gdmmonitor
GRANT SELECT ON sys.sysfiles TO gdmmonitor
-- Grant execute privileges to the role for MSSql 2005 or above
PRINT '==> Granting MSSql 2005 and above EXECUTE privileges on: ' + @dbName
GRANT EXECUTE ON msdb.dbo.sp_enum_login_for_proxy TO gdmmonitor
GRANT SELECT ON sys.database_role_members TO gdmmonitor
END
IF (@dbVer > '2000' and @dbVer < '2012')
--This sp is not available in SQL 2012
BEGIN
GRANT EXECUTE ON sp_get_dtspackage TO gdmmonitor
END
-- Re-add the dropped members
IF EXISTS (SELECT count(*) FROM #rolemember)
BEGIN
PRINT '==> Re-adding the gdmmonitor role members on: ' + @dbName
DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember
OPEN DropCursor
FETCH DropCursor INTO @memberName
WHILE @@Fetch_Status = 0
BEGIN
PRINT '==> Re-adding member: ''' + @memberName + ''''
exec('EXEC sp_addrolemember ''gdmmonitor'', ''' + @memberName + ''' ;')
FETCH DropCursor INTO @memberName
END
CLOSE DropCursor
DEALLOCATE DropCursor
END
-- drop the temporary table
DROP TABLE #rolemember
-- END of role creation on database
PRINT '==> END of gdmmonitor role creation on: ' + @dbName
-- Role creation complete
PRINT '<<<==================================================================<<<'
PRINT '<<< END of creating role: "gdmmonitor" at the server level.'
PRINT '<<<==================================================================<<<'
PRINT ''
PRINT '>>>==================================================================>>>'
PRINT '>>> Starting application database role creation'
PRINT '>>>==================================================================>>>'
use master
DECLARE @databaseName AS varchar(80)
DECLARE @executeString AS varchar(7950)
DECLARE @dbcounter as int
set @dbcounter = 0
DECLARE DatabaseCursor CURSOR FOR SELECT name from sysdatabases where name not in ('master', 'msdb')
and not (status & 1024 > 1)
--read only
and not (status & 4096 > 1)
--single user
and not (status & 512 > 1)
--offline
and not (status & 32 > 1)
--loading
and not (status & 64 > 1)
--pre recovery
and not (status & 128 > 1)
--recovering
and not (status & 256 > 1)
--not recovered
and not (status & 32768 > 1)
--emergency mode
OPEN DatabaseCursor
FETCH DatabaseCursor INTO @databaseName
WHILE @@Fetch_Status = 0
BEGIN
set @dbcounter = @dbcounter + 1
set @databaseName = '"' + @databaseName + '"'
set @executeString = ''
set @executeString = 'use ' + @databaseName + ' ' +
'PRINT ''>>>==================================================================>>>'' ' +
'PRINT ''>>> Starting MSSql ' + @dbVer + ' role creation on database: ' + @databaseName + ''' ' +
'PRINT ''>>>==================================================================>>>'' ' +
'/* Variable @memberNameDBname must be declare within the string or else it will fail */ ' +
'DECLARE @memberName' + cast(@dbcounter as varchar(5)) + ' as varchar(50) ' +
'/*find any members of the role if it exists*/ ' +
'CREATE TABLE #rolemember (membername VARCHAR(256) NOT NULL) ' +
'INSERT INTO #rolemember ' +
'SELECT DISTINCT usr.name FROM dbo.sysusers usr, dbo.sysmembers mbr ' +
'WHERE usr.uid = mbr.memberuid ' +
'AND groupuid = (SELECT uid FROM dbo.sysusers WHERE name = ''gdmmonitor'') ' +
'/*Drop the Role Members If they exist*/ ' +
'IF EXISTS (SELECT * FROM #rolemember) ' +
'BEGIN ' +
'PRINT ''==> Dropping the role members on: ' + @databaseName + ''' ' +
'DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember ' +
'OPEN DropCursor ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'WHILE @@Fetch_Status = 0 ' +
'BEGIN ' +
'PRINT ''==> Dropping member: '' + @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'exec(''EXEC sp_droprolemember ''''gdmmonitor'''', '''''' + @memberName' + cast(@dbcounter as varchar(5)) + ' + '''''';'') ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'END ' +
'CLOSE DropCursor ' +
'DEALLOCATE DropCursor ' +
'END ' +
'/*drop the role if it exists*/ ' +
'IF EXISTS (SELECT 1 FROM .dbo.sysusers WHERE name = ''gdmmonitor'') ' +
'BEGIN ' +
'PRINT ''==> Dropping the gdmmonitor role on: ' + @databaseName + ''' ' +
'exec sp_droprole ''gdmmonitor'' ' +
'END ' +
'/* Create the role */ ' +
'PRINT ''==> Creating the gdmmonitor role on: ' + @databaseName + ''' ' +
'exec sp_addrole ''gdmmonitor'' ' +
'/* Grant select privileges to the role for MSSql Common */ ' +
'PRINT ''==> Granting common SELECT privileges on: ' + @databaseName + ''' ' +
'GRANT SELECT ON dbo.sysmembers TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysobjects TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysprotects TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysusers TO gdmmonitor ' +
'GRANT SELECT ON dbo.sysfiles TO gdmmonitor ' +
'GRANT SELECT ON dbo.syspermissions TO gdmmonitor ' +
'/* Check if the version is 2005 or greater */ ' +
'IF (' + @dbVer + ' != ''2000'') ' +
'BEGIN ' +
'/* Grant select privileges to the role for MSSql 2005 and above */ ' +
'PRINT ''==> Granting MSSql 2005 and above SELECT privileges on: ' + @databaseName + ''' ' +
'GRANT SELECT ON sys.database_permissions TO gdmmonitor ' +
'GRANT SELECT ON sys.all_objects TO gdmmonitor ' +
'GRANT SELECT ON sys.database_principals TO gdmmonitor ' +
'GRANT SELECT ON sys.sysfiles TO gdmmonitor ' +
'GRANT SELECT ON sys.database_role_members TO gdmmonitor ' +
'END ' +
'/* Re-add the dropped members */ ' +
'IF EXISTS (SELECT 1 FROM #rolemember) ' +
'BEGIN ' +
'PRINT ''==> Re-adding the gdmmonitor role members on: ' + @databaseName + ''' ' +
'DECLARE DropCursor CURSOR FOR SELECT membername from #rolemember ' +
'OPEN DropCursor ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'WHILE @@Fetch_Status = 0 ' +
'BEGIN ' +
'PRINT ''==> Re-adding member: '' + @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'exec(''EXEC sp_addrolemember ''''gdmmonitor'''', '''''' + @memberName' + cast(@dbcounter as varchar(5)) + ' + '''''';'') ' +
'FETCH DropCursor INTO @memberName' + cast(@dbcounter as varchar(5)) + ' ' +
'END ' +
'CLOSE DropCursor ' +
'DEALLOCATE DropCursor ' +
'END ' +
'/* drop the temporary table */ ' +
'DROP TABLE #rolemember ' +
'PRINT ''<<<==================================================================<<<'' ' +
'PRINT ''<<< END of role creation on: ' + @databaseName + ''' ' +
'PRINT ''<<<==================================================================<<<'' ' +
'PRINT '' ''' +
'PRINT '' '''
execute (@executeString)
FETCH DatabaseCursor INTO @databaseName
END
CLOSE DatabaseCursor
DEALLOCATE DatabaseCursor
-- Adding user to all the databases
-- and grant gdmmonitor role, only if login exists.
PRINT '>>>==================================================================>>>'
PRINT '>>> Add and Grant gdmmonitor role to: ''' + @Guardium_user + ''''
PRINT '>>> on all databases.'
PRINT '>>>==================================================================>>>'
USE master
/* Check if @Guardium_user is a login exist, if not do nothing.*/
IF NOT EXISTS (select * from syslogins where name = @Guardium_user)
BEGIN
PRINT ''
PRINT '************************************************************************'
PRINT '*** ERROR: Could not find the login: ''' + @Guardium_user + ''''
PRINT '*** Please add the login and re-run this script.'
PRINT '************************************************************************'
PRINT ''
END
ELSE
BEGIN
DECLARE @counter AS smallint
set @counter = 0
-- This loop runs 4 time just to make sure that the @Guardium_user gets added to all db.
-- 99% of the time, this is totally unnecessary. But in some rare case on SQL 2005
-- the loop skips some databases when it tried to add the @Guardium_user.
-- After two to three executions, the user is added in all the dbs.
-- Might be a SQL Server bug.
WHILE @counter <= 3
BEGIN
set @counter = @counter + 1
set @databaseName = ''
set @executeString = ''
DECLARE DatabaseCursor CURSOR FOR SELECT name from sysdatabases
where not (status & 1024 > 1)
--read only
and not (status & 4096 > 1)
--single user
and not (status & 512 > 1)
--offline
and not (status & 32 > 1)
--loading
and not (status & 64 > 1)
--pre recovery
and not (status & 128 > 1)
--recovering
and not (status & 256 > 1)
--not recovered
and not (status & 32768 > 1)
--emergency mode
OPEN DatabaseCursor
FETCH DatabaseCursor INTO @databaseName
WHILE @@Fetch_Status = 0
BEGIN
set @databaseName = '"' + @databaseName + '"'
set @executeString = ''
set @executeString = 'use ' + @databaseName + ' ' +
'/*Check if the login already has access to this database */ ' +
'IF EXISTS (select * from sysusers where name = ''' + @Guardium_user + ''' and islogin = 1) ' +
'BEGIN ' +
'/*Check if login already have gdmmonitor role*/ ' +
'IF NOT EXISTS (SELECT usr.name FROM dbo.sysusers usr, dbo.sysmembers mbr WHERE usr.uid = mbr.memberuid ' +
'AND mbr.groupuid = (SELECT uid FROM dbo.sysusers WHERE name = ''gdmmonitor'') ' +
'AND usr.name = ''' + @Guardium_user + ''') ' +
'BEGIN ' +
'PRINT ''==> Granting gdmmonitor role to ' + @Guardium_user + ' on database ' + @databaseName + ''' ' +
'execute sp_addrolemember ''gdmmonitor''' + ', [' + @Guardium_user + '] ' +
'PRINT '' ''' +
'END ' +
'END ' +
'IF NOT EXISTS (select * from sysusers where name = ''' + @Guardium_user + ''' and islogin = 1) ' +
'BEGIN ' +
'PRINT ''==> Adding user [' + @Guardium_user + '] to database: ' + @databaseName + ''' ' +
'execute sp_adduser [' + @Guardium_user + '] ' +
'PRINT ''==> Granting gdmmonitor role to ' + @Guardium_user + ' on database ' + @databaseName + ''' ' +
'execute sp_addrolemember ''gdmmonitor''' + ', [' + @Guardium_user + '] ' +
'PRINT '' ''' +
'END '
execute (@executeString)
FETCH DatabaseCursor INTO @databaseName
END
CLOSE DatabaseCursor
DEALLOCATE DatabaseCursor
END -- end while
-- Required for Version 2005 or greater.
IF (@dbVer != '2000')
BEGIN
-- Grant system privileges to the @guardium_user. This is a requirement for >= SQL 2005
-- or else some system catalogs will filter our result from assessment test.
-- This will show up in sys.server_permissions view.
PRINT '==> Granting catalog privileges to: ''' + @Guardium_user + ''''
execute ('grant VIEW ANY DATABASE to [' + @Guardium_user + ']' )
execute ('grant VIEW ANY DEFINITION to [' + @Guardium_user + ']' )
END
PRINT '<<<==================================================================<<<'
PRINT '<<< Finished Adding and Granting gdmmonitor role to: ''' + @Guardium_user + ''''
PRINT '<<< on all databases.'
PRINT '<<<==================================================================<<<'
PRINT ''
END
GO

Thanks a lot Sir... it worked.
Can you also help me in troubleshooting below issue?
This script is working fine on all databases except one MS SQL 2005 database. build of this database is 9.00.3042.00
SA account with highest privileges is been used for script execution. errors received are as follow:
>>>==================================================================>>>
>>> Creating role: "gdmmonitor" at the server level.
>>>==================================================================>>>
==> Granting MSSSQL 2005 and above setupadmin server role
==> Starting MSSql 2005 role creation on database: master
(0 row(s) affected)
==> Dropping the gdmmonitor role members on: master
==> Creating the role gdmmonitor on: master
Msg 15002, Level 16, State 1, Procedure sp_addrole, Line 16
The procedure 'sys.sp_addrole' cannot be executed within a transaction.
==> Granting common SELECT privileges on: master
Msg 15151, Level 16, State 1, Line 117
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 118
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 119
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 120
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 121
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 122
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 123
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 124
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 125
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 126
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
==> Granting common EXECUTE privileges on: master
Msg 15151, Level 16, State 1, Line 130
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 131
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 132
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 133
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 134
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 135
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.
Msg 15151, Level 16, State 1, Line 136
Cannot find the user 'gdmmonitor', because it does not exist or you do not have permission.

Creating users and adding them to groups programmatically in Portal 902

What is the correct process and code needed to create a user and add it to a group programmatically in Portal 9.0.2 and how is it different from what it used to be in 309.
If anyone has an answer, please let me know and all contributions are really appreciated.
Thanks

You can use these procedures.
procedure Create_User(first_name IN VARCHAR2
,last_name IN VARCHAR2
,password IN VARCHAR2
,email IN VARCHAR2
,employeenumber IN VARCHAR2
,description IN VARCHAR2
is
retval PLS_INTEGER;
emp_session DBMS_LDAP.session;
emp_dn VARCHAR2(256);
emp_rdn VARCHAR2(256);
emp_array DBMS_LDAP.MOD_ARRAY;
emp_vals DBMS_LDAP.STRING_COLLECTION ;
ldap_host VARCHAR2(256);
ldap_port VARCHAR2(256);
ldap_user VARCHAR2(256);
ldap_passwd VARCHAR2(256);
ldap_base VARCHAR2(256);
BEGIN
retval := -1;
ldap_host := '<you_host>';
ldap_port := '4032';
ldap_user := 'cn=orcladmin';
ldap_passwd:= '<orcladmin_password>';
ldap_base := 'cn=users,dc=<your_compani_name>,dc=com';
DBMS_LDAP.USE_EXCEPTION := TRUE;
emp_session := DBMS_LDAP.init(ldap_host, ldap_port);
-- Bind to the directory
retval := DBMS_LDAP.simple_bind_s(emp_session,ldap_user, ldap_passwd);
emp_array := DBMS_LDAP.create_mod_array(14);
emp_vals(1) := first_name;
DBMS_LDAP.populate_mod_array(emp_array,DBMS_LDAP.MOD_ADD,'cn',emp_vals);
DBMS_LDAP.populate_mod_array(emp_array,DBMS_LDAP.MOD_ADD,'givenname',emp_vals);
DBMS_LDAP.populate_mod_array(emp_array,DBMS_LDAP.MOD_ADD,'uid',emp_vals);
emp_vals(1) := last_name;
DBMS_LDAP.populate_mod_array(emp_array,DBMS_LDAP.MOD_ADD,'sn',emp_vals);
emp_vals(1) := employeenumber;
DBMS_LDAP.populate_mod_array(emp_array,DBMS_LDAP.MOD_ADD,'employeenumber',emp_vals);
emp_vals(1) := description;
DBMS_LDAP.populate_mod_array(emp_array,DBMS_LDAP.MOD_ADD,'description',emp_vals);
emp_vals(1) := 'top';
emp_vals(2) := 'person';
emp_vals(3) := 'organizationalPerson';
emp_vals(4) := 'inetOrgPerson';
emp_vals(5) := 'orcluser';
emp_vals(6) := 'orcluserv2';
DBMS_LDAP.populate_mod_array(emp_array,DBMS_LDAP.MOD_ADD,'objectclass',emp_vals);
emp_vals.DELETE;
emp_vals(1) := email;
DBMS_LDAP.populate_mod_array(emp_array,DBMS_LDAP.MOD_ADD,'mail',emp_vals);
emp_vals(1) := password;
DBMS_LDAP.populate_mod_array(emp_array,DBMS_LDAP.MOD_ADD,'userPassword',emp_vals);
emp_dn := 'cn=' || first_name || ',' || ldap_base ;
retval := DBMS_LDAP.add_s(emp_session,emp_dn,emp_array);
DBMS_LDAP.free_mod_array(emp_array);
retval := DBMS_LDAP.unbind_s(emp_session);
-- Handle Exceptions
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(' Error code : ' || TO_CHAR(SQLCODE));
DBMS_OUTPUT.PUT_LINE(' Error Message : ' || SQLERRM);
DBMS_OUTPUT.PUT_LINE(' Exception encountered .. exiting');
end Create_User;
create or replace
procedure Add_User_To_Group(user_name IN VARCHAR2
,group_name IN VARCHAR2
is
retval PLS_INTEGER;
ldap_host VARCHAR2(256);
ldap_port VARCHAR2(256);
ldap_user VARCHAR2(256);
ldap_passwd VARCHAR2(256);
ldap_base VARCHAR2(256);
my_session DBMS_LDAP.session;
my_message DBMS_LDAP.message;
my_entry DBMS_LDAP.message;
my_array DBMS_LDAP.MOD_ARRAY;
my_vals DBMS_LDAP.STRING_COLLECTION ;
group_dn VARCHAR2(256);
user_dn VARCHAR2(256);
BEGIN
retval := -1;
ldap_host := '<you_host>';
ldap_port := '4032';
ldap_user := 'cn=orcladmin';
ldap_passwd:= '<orcladmin_password>';
ldap_base := 'cn=users,dc=<your_compani_name>,dc=com';
DBMS_LDAP.USE_EXCEPTION := TRUE;
my_session := DBMS_LDAP.init(ldap_host, ldap_port);
-- Bind to the directory
retval := DBMS_LDAP.simple_bind_s(my_session,ldap_user, ldap_passwd);
--Find the user
my_vals(1) := '1.1';
retval := DBMS_LDAP.search_s(my_session,
ldap_base,
DBMS_LDAP.SCOPE_SUBTREE,
'(&(objectClass=person)(cn=' || user_name || '))',
my_vals,
0,
my_message);
my_entry := DBMS_LDAP.first_entry(my_session, my_message);
IF my_entry IS NOT NULL THEN
user_dn := DBMS_LDAP.get_dn(my_session, my_entry);
retval := DBMS_LDAP.search_s(my_session,
ldap_base,
DBMS_LDAP.SCOPE_SUBTREE,
'(&(objectClass=orclGroup)(cn=' || group_name ||'))',
my_vals,
0,
my_message);
my_entry := DBMS_LDAP.first_entry(my_session, my_message);
IF my_entry IS NOT NULL THEN
group_dn := DBMS_LDAP.get_dn(my_session, my_entry);
my_array := DBMS_LDAP.create_mod_array(1);
my_vals(1) := user_dn;
DBMS_LDAP.populate_mod_array(my_array, DBMS_LDAP.MOD_ADD, 'uniqueMember', my_vals);
retval := DBMS_LDAP.modify_s(my_session, group_dn, my_array);
DBMS_OUTPUT.PUT_LINE(RPAD('modify_s Returns ',25,' ') || ': '|| TO_CHAR(retval));
DBMS_LDAP.free_mod_array(my_array);
END IF;
END IF;
my_vals.DELETE;
retval := DBMS_LDAP.unbind_s(my_session);
-- Handle Exceptions
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(' Error code : ' || TO_CHAR(SQLCODE));
DBMS_OUTPUT.PUT_LINE(' Error Message : ' || SQLERRM);
DBMS_OUTPUT.PUT_LINE(' Exception encountered .. exiting');
end Add_User_To_Group;

Script to create user in OBIEE 10g

In OBIEE 10g, is it possible to use a script to create users automatically.
I need this option to import user from the LDAP because if the LDAP are not created in OBI adminsitration tool, they can´t enter in analyticas (BI Server error)

I suggest you to read
Oracle9i Database Performance Tuning Guide and Reference
Release 2 (9.2)
Part Number A96533-02
Chapter 7. Using Plan Stability
~ Madrid

Script to create user OUTLN in 9i

Hi,
Note 240478.1 "Script to create user OUTLN in 9i"
This script create OUTLN user.
And then should we :
" issue grants, create tables and indexes."
The qustion is :
should we issue grants, create tables and indexes after executing the script ? Then
create which tables , which indexes ? Does the script it-self do not this
Many thanks before.

I suggest you to read
Oracle9i Database Performance Tuning Guide and Reference
Release 2 (9.2)
Part Number A96533-02
Chapter 7. Using Plan Stability
~ Madrid

How can i extended attribute of user and add attribute to ldap

how can i extended attribute of user and add attribute to ldap
1.
i use spe to modified "Default User Library":add Field like
title:nation name:accounts[Lighthouse].nation
2.
modified "IDM Schema Configuration"
add <IDMAttributeConfiguration name='nation' description='default attribute from UserExtendedAttributes/UserUIConfig' syntax='STRING'/>
in <IDMAttributeConfigurations>
and
add <IDMObjectClassAttributeConfiguration name='nation' queryable='true' summary='true'/> in<IDMObjectClassConfiguration>
there is extended attribute when i create new user
3.
i create new resource to ldap,and i add nation in "Account Attributes" tab
but the new attribute not add to ldap
i am beginner,how to extended attirbute add add to ldap attribute?

So, if I want to fill in blanks on a form where I need to add more pages to fill history, what program do I need? In Adobe Reader, I can edit and fill in blanks, but I cannot duplicate more blank pages.

How to create User and Database in different Table spaces

How to create User and Database in different Table spaces using oracle 10g
Regards
daya

I am sorry but your question does not seem to make much sense.
Can you please rephrase your question?

Need a help to create user and assign BP to it

Hi,
I have requirement to create Users (like SU01) in CRM and for that users need to create BP with role EMPLOYEE and assign BP to that USER.
Can anybody please help on which Function Module I need to use to create user and assign BP to it.
Thanks in advance..
Sushant

Hi,
Many post post are there for your query in SDN search if my below shown link is not helpful.
Hope the below will help you.
Users Created ...
Cheers!!
VEnk@

How to create Service and response profiles

Hello Gurus
I have configured the IC Web Client in solution manager 4.0 system. But in sservice ticket i am not able to see the SLA info. Please tell me
where to give these SLA parameters ?
How to create service and response profiles?
Shuold i use SLF1 instead of SLFN to maintain SLA ?
Please tell me how to do these it will be very helpful....

Hi Naveen
The Service and Response Profiles can be created in the easy access menu using the path
SAP Menu> Service> Service Contracts and Service Plans--> Maintain availability and Response Time
Availability time is also know as service profile
And then assign these service and response profiles to your Servie Product Master which will be used in the service ticket.
For the field to be available to enter teh service and response profile in the product master, assign the set types COMM_PR_SRV to the category in which the product will be created
Hope this would help.
Regards,
Rekha Dadwal
<b>
You gain a point for every point that you reward. So reward helpful answers generously</b>

Creating users and groups

Hi all,
I have about 100 users and many groups.
How can i create users and groups quickly?
Appreciate any help

Like the way you export planning application to file system and use it as a source to migrate it, In the same way take shared services file system export in the file system and migrate it to the new environment.
Cheers..!!!
Rahul S.

How i can delete and remove apple ID of old user and add my current apple ID to used i pod touch?

how i can remove and delete apple ID of old user and add my current apple ID to used I POD TOUCH

Unfortunately, you cannot delete Apple IDs but what you can do is go to Settings>Store>and sign out of the old Apple ID on your iPod and the sign in to the new Apple ID.
All of the apps that were purchased under the old ID will still need the old ID's password for updates.
More info can be found here: http://support.apple.com/kb/he37

Create users under Administration Server Create user and Refresh users options are disabled

We have installed and configured 11.1.2.2 successfully, Essbase in standalone mode.
When we try to create users under Administration Server Create user and Refresh users options are disabled. Please let me know how to create EAS users?
Thanks,
Satheesh.

Please find below response.
1.You can create users from EAS console using maxl, if you have not externalized the users .
When we create using Maxl it will create for 'ESSBASE Servers' users but we want to create additional administrator users under 'Administrator Services' --> 'Users'. At the moment default 'Admin' users is created under 'Administrator Services' --> 'Users'.
2. you have installed your essbase in a stand -alone mode , then the option of creating users will be enabled and you can give appropriate provision to applications.
Yes. But the create users is disable for Admin.
3. Through which url are you accessing EAS console is it http://Servername:19000/workspace/index.jsp ?
http://prod-server:10080/easconsole/console.html
Please suggest.

How to create users and groups using WLST Offline with Weblogic 8.1.4

How to create users and groups using WLST Offline with Weblogic 8.1.4?
Any ideas?

Hi this is how i created a user using WLST Offline?
cd('/Security/' + domainName)
# Delete the default user name weblogic
# incase you want to remove the defualt user weblogic
delete('weblogic','User')
# Creating a new user defined
create(userName, 'User')
# Setting the password of the user you created.
cd ('/Security/' + domainName + '/User/' + userName)
cmo.setPassword(password)
Regards
Makenzo

Script to Create User and Add profiles

Similar Messages

Maybe you are looking for