Script to get the status of a PW in 365

I have been doing a ton of research unfortunately I don't think this is possible. I am looking to see when a password expires for a specific account that is only in 365. It is not synced with AD so it is in the cloud. Is there a script to run to
find out when the password expires? Thanks
http://msdn.microsoft.com/en-us/library/windows/desktop/ms680657(v=vs.85).aspx
The users will get a notice fourteen days before expiry.
¯\_(ツ)_/¯

Similar Messages

Script for getting the online/offline status

Hi all,
After enabling checkbox of "Enable assistive access device" is possible to get the online/ offline status.From Menu we will get the status.Without doing this i want to get the apple mail account online/offline status.hope some help scripts for this.

[That script|http://discussions.apple.com/message.jspa?messageID=11012484#11012484] could change the Online Status of all mail accounts. The following one will just report their Online Status. Is this what you are (were) asking for?
--BEGINNING OF SCRIPT
tell application "Mail" to activate
tell application "System Events" to tell process "Mail"
set theMenu to menu "Mailbox" of menu bar 1
if enabled of menu item "Take All Accounts Online" of theMenu then
return "All accounts are currently offline"
else
return "All accounts are currently online"
end if
end tell
--END OF SCRIPT

Powershell script to get firewall status on all computers on the domain

Trying to create a script that will get the status of the firewall's on all computers in the domain. I have a decent start but the formatting looks like crap and I am sure there is a better way to do this. Any help would be appreciated.
$strFilter = "computer"
$objDomain = New-Object System.DirectoryServices.DirectoryEntry
$objSearcher = New-Object System.DirectoryServices.DirectorySearcher
$objSearcher.SearchRoot = $objDomain
$objSearcher.SearchScope = "Subtree"
$objSearcher.PageSize = 1000
$objSearcher.Filter = "(objectCategory=$strFilter)"
$colResults = $objSearcher.FindAll()
foreach ($i in $colResults)
$objComputer = $i.GetDirectoryEntry()
$objComputer.Name
netsh -r $objComputer.Name advfirewall show allprofiles state | Export-Csv -append -Path C:\Firewall.csv
My export is not working as expected - it is just giving me gibberish numbers

Using the above script I was able to get the netsh output to txt. However the formatting is not very good. Not sure if there is anything that can be done about that. Unfortunately though the output does not even display the computer
name so that the output is just a bunch of the following...
Domain Profile Settings:
State                                 OFF
Private Profile Settings:
State                                 OFF
Public Profile Settings:
State                                 OFF
Ok.
Domain Profile Settings:
State                                 OFF
Private Profile Settings:
State                                 OFF
Public Profile Settings:
State                                 OFF
Ok.
How do I at least get the computer name in the text file?
I added $objComputer.Name to the loop this and it didn't work... it did not put this in the text file.
Thanks for your help
$strFilter = "computer"
$objDomain = New-Object System.DirectoryServices.DirectoryEntry
$objSearcher = New-Object System.DirectoryServices.DirectorySearcher
$objSearcher.SearchRoot = $objDomain
$objSearcher.SearchScope = "Subtree"
$objSearcher.PageSize = 1000
$searcher=[adsisearcher]'(objectCategory=computer)'
$searcher.FindAll() |
ForEach-Object{
$objComputer.Name
netsh -r $_.Properties['name'][0] advfirewall show allprofiles state
} |
Out-File -append -FilePath C:\Firewall.txt

How to get the status of Javascript inside a java class

Hi,
Can anybody let me know the way by which I can get the status of Javascript (enabled/disabled) in browser inside a Java Class.
I do have a trick -
<input type="hidden" name="jstatus" value="disabled">
<input type="submit" name="submit" onClick="doChecking()">
<script language= javascript>
function doChecking()
document.form.jstatus.value = "enabled";
submit();
Now inside our java class we can check the value of "jstatus" if it is disabled then it is disabled else it is enabled.
Ha ha wat a stupid trick...... ;-)
Plz let me know a real approach to determine the Javascript status.
Cheers !!!
Irshad

Actually, I don't think that trick is stupid at all. Javascript and Java are normally in no way related (javascript is just plain text content to your servlets / jsp's). So a good way of getting such information to your server is submitting it, like you do.
Another possibility would be to do it with Ajax in the background, but that all depends on what you do with the information.

How to get the status of a window?

Is there a way to get the status of a display window? I'm looking specifically for whether or not it is open and what image is being displayed in it.
If there is no easy way to do this, can it be added to the list of suggestions for the next version?

Right now there is no way to determine these attributes from software. When I went to enter a suggestion to R&D, I found that a very similar one was submitted recently. I added your suggestions to the current one. I'm sorry there isn't an easy solution.
Kyle V.

How do I get the status bar to appear in FF4.1?

I upgraded to FF4.1 and discovered the status bar had disappeared and a few add-ons no longer worked :/
After discovering this I re-installed FF3.
How can I get the status bar back?
TYIA
Max

See step #10 installing the Status-4-Evar extension in the following ...
You can make Firefox 4.0.1 look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

Which table i will get the status of the User decision Result status

Hi Experts
Which table i will get the status of the User decision Result status
(eg : Inspection completion forced )
This i can see in QA33

Hi jag
Ok fine actually it is not storing in any table...these r all text symols...if u see this program MQEVAF22...U EILL GET SOME IDEA
CALL FUNCTION 'QAST_STATUS_CHECK'
       EXPORTING
            I_OBJNR          = QALS-OBJNR
            I_STATUS         = C_STATUS_PAKO
       EXCEPTIONS
            STATUS_NOT_ACTIV = 01.
IF SY-SUBRC NE C_RC01.
    MOVE C_KREUZ TO L_STAT_PAKO.
ELSE.
    CLEAR L_STAT_PAKO.
ENDIF.
Prüfen, ob Los bestandsrelevant ist
MOVE RQEVA-STAT_BERF TO L_STAT_BERF.
Prüfen, ob Los auf SKIP sitzt
CALL FUNCTION 'QAST_STATUS_CHECK'
       EXPORTING
            I_OBJNR          = QALS-OBJNR
            I_STATUS         = C_STATUS_SKIP
       EXCEPTIONS
            STATUS_NOT_ACTIV = 01.
IF SY-SUBRC NE C_RC01.
    MOVE C_KREUZ TO L_STAT_SKIP.
ELSE.
    CLEAR L_STAT_SKIP.
ENDIF.
IF QALS-STAT35 >< C_KREUZ.
VE noch nicht getroffen !
    IF     ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 )
       AND QALS-STAT13     = C_PPKTTYP-PHPR
       AND G_ANZAHL_PPKT_LOEVM > CI_0.
Es wurden physische Proben storniert !              PRIORITÄT 1A
        MOVE TEXT-I17 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I17'.
    ELSEIF ( QALS-STAT14 = C_KREUZ AND QALS-OFFENNLZMK > CI_0 )
      OR ( L_STAT_PAKO = C_KREUZ
           AND ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 ) ).
Prüfung wurde abgebrochen !                         PRIORITÄT 1
      MOVE TEXT-I04 TO RQEVA-INFO_LINE.    L_TEXT_NR = 'I04'.
      MOVE C_KREUZ TO L_ICON.
    ELSEIF G_ANZ_RUECK_MK > 0.
Es wurden Merkmale rückgewiesen !                  PRIORITÄT 2
      MOVE TEXT-I01 TO RQEVA-INFO_LINE.    L_TEXT_NR = 'I01'.
      MOVE C_KREUZ TO L_ICON.
    ELSEIF QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 .
      IF QALS-OFFENNLZMK > CI_0.
Es sind nicht alle Merkmale abgeschlossen !         PRIORITÄT 3
        MOVE TEXT-I02 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I02'.
      ELSEIF QALS-OFFEN_LZMK > CI_0.
        MOVE TEXT-I05 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I05'.
      ENDIF.
    ELSEIF QALS-WERK NE QALS-WERKVORG.
    Prüflosmenge wurde umgelagert auf anderes Werk   Priorität 4
      MOVE TEXT-I16 TO RQEVA-INFO_LINE.    L_TEXT_NR = 'I16'.
    ELSEIF QALS-LMENGEIST > QALS-LOSMENGE.
    Istmenge im Los größer als Losmenge!             Priorität 5
      MOVE TEXT-I15 TO RQEVA-INFO_LINE.    L_TEXT_NR = 'I15'.
    ELSEIF L_STAT_SKIP    = C_KREUZ.
Prüfverzicht: Los ist geskippt !                    PRIORITÄT 6
      MOVE TEXT-I03 TO RQEVA-INFO_LINE.    L_TEXT_NR = 'I03'.
    ENDIF.
ELSE.
VE getroffen bzw. eingetragen
   IF     ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 )
       AND QALS-STAT13     = C_PPKTTYP-PHPR
       AND G_ANZAHL_PPKT_LOEVM > CI_0.
Es wurden physische Proben storniert !              PRIORITÄT 1A
        MOVE TEXT-I17 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I17'.
    ELSEIF ( QALS-STAT14 = C_KREUZ AND QALS-OFFENNLZMK > CI_0 )
      OR ( L_STAT_PAKO = C_KREUZ
          AND ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 ) ).
Prüfung wurde abgebrochen !                         PRIORITÄT 1
      MOVE TEXT-I04 TO RQEVA-INFO_LINE.    L_TEXT_NR = 'I04'.
      MOVE C_KREUZ TO L_ICON.
    ELSEIF L_STAT_PAKO EQ SPACE
       AND ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 ).
Es sind noch Langzeitmerkmale zu bearbeiten !       PRIORITÄT 2
      MOVE TEXT-I05 TO RQEVA-INFO_LINE.    L_TEXT_NR = 'I05'.
    ELSEIF L_STAT_BERF = C_KREUZ AND QALS-STAT34 EQ SPACE.
Los ist bestandsmäßig noch nicht entlastet !        PRIORITÄT 3
      MOVE TEXT-I06 TO RQEVA-INFO_LINE.    L_TEXT_NR = 'I06'.
    ELSEIF QALS-WERK NE QALS-WERKVORG.
    Prüflosmenge wurde umgelagert auf anderes Werk   Priorität 4
      MOVE TEXT-I16 TO RQEVA-INFO_LINE.    L_TEXT_NR = 'I16'.
    ELSEIF QALS-LMENGEIST > QALS-LOSMENGE.
    Istmenge im Los größer als Losmenge!             Priorität 5
      MOVE TEXT-I15 TO RQEVA-INFO_LINE.    L_TEXT_NR = 'I15'.
    ELSEIF L_STAT_SKIP = C_KREUZ.
Prüfverzicht: Los ist geskippt !                    PRIORITÄT 6
      MOVE TEXT-I03 TO RQEVA-INFO_LINE.    L_TEXT_NR = 'I03'.
    ENDIF.
ENDIF.

From which table can we get the status of sales order

hi
from which table can we get the status of sales order

Hi
Check the Table <b>VBUK for HEADER level status</b> of Sales order
and <b>VBUP for Item level statuses</b>
enter VBELN = Sales order and VBTYP = C for sales orders
as VBUK and VBUP stores all Sales documents like deliveries, Invoices, quotations, contracts etc
<b>Reward points for useful Answers</b>
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Unknown error: there was a problem getting the status directory!

Hi, Folks,
I followed the instructions on this page :http://deimos.apple.com/rsrc/doc/iTunesUAdministrationGuide/AddingContent/chapte r_12_section_6.html#//apple_ref/doc/uid/AdminGuide-CH22-SW5, and try to upload a file to our university's Itunes U site.
I believe got every step right, but server return a error message: "unknown error: there was a problem getting the status directory". Any suggestion or information will be helpful.
Thanks
Youjun

Forgot to mention. ours is a public site but the collection I am trying to access is not published.
Youjun

Powershell script to get the low disk space on the servers...

Hi,
We have many SQL & Sharepoint servers running on windows server. I need some Powershell script to get the low disk space on those servers and it should send an mail alert saying "Disc d:\ have less than threshold 15% free space".
Awaiting for response.
Thanks
Anil

you should be able to use this powershell script which you can run as a scheduled task.
just change the details at the start of the script to point the script to the right location to create log files. you will need to have a plain text file containing a list of server names or ip addresses that you want to check drive space on.
# Change the following variables based on your environment
#specify the path to the file you want to generate containing drive space information
$html_file_dir = "\\server\share\DriveSpace"
#specify the path and file name of the text file containing the list of servers names you want to check drive space on - each server name on a seperate line in plain text file
$server_file = "\\server\share\servers.txt"
#speicfy the from address for the email
$from_address = "[email protected]"
#specify the to address for the email
$to_address = "[email protected]"
#specify the smtp server to use to send the email
$email_gateway = "smtp.domain.com" # Can either be DNS name or IP address to SMTP server
# The seventh line from the bottom (line 167) is used if your smtp gateway requires authentication. If you require smtp authentication
# you must uncomment it and set the following variables.
$smtp_user = ""
$smtp_pass = ""
# Change the following variables for the style of the report.
$background_color = "rgb(140,166,193)" # can be in rgb format (rgb(0,0,0)) or hex format (#FFFFFF)
$server_name_font = "Arial"
$server_name_font_size = "20px"
$server_name_bg_color = "rgb(77,108,145)" # can be in rgb format (rgb(0,0,0)) or hex format (#FFFFFF)
$heading_font = "Arial"
$heading_font_size = "14px"
$heading_name_bg_color = "rgb(95,130,169)" # can be in rgb format (rgb(0,0,0)) or hex format (#FFFFFF)
$data_font = "Arial"
$data_font_size = "11px"
# Colors for space
$very_low_space = "rgb(255,0,0)" # very low space equals anything in the MB
$low_space = "rgb(251,251,0)" # low space is less then or equal to 10 GB
$medium_space = "rgb(249,124,0)" # medium space is less then or equal to 100 GB
#### NO CHANGES SHOULD BE MADE BELOW UNLESS YOU KNOW WHAT YOU ARE DOING
# Define some variables
$ErrorActionPreference = "SilentlyContinue"
$date = Get-Date -UFormat "%Y%m%d"
$html_file = New-Item -ItemType File -Path "$html_file_dir\DiskSpace_$date.html" -Force
# Create the file
$html_file
# Function to be used to convert bytes to MB or GB or TB
Function ConvertBytes {
param($size)
If ($size -lt 1MB) {
$drive_size = $size / 1KB
$drive_size = [Math]::Round($drive_size, 2)
[string]$drive_size + ' KB'
}elseif ($size -lt 1GB){
$drive_size = $size / 1MB
$drive_size = [Math]::Round($drive_size, 2)
[string]$drive_size + ' MB'
}ElseIf ($size -lt 1TB){
$drive_size = $size / 1GB
$drive_size = [Math]::Round($drive_size, 2)
[string]$drive_size + ' GB'
}Else{
$drive_size = $size / 1TB
$drive_size = [Math]::Round($drive_size, 2)
[string]$drive_size + ' TB'
# Create the header and footer contents of the html page for output
$html_header = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html lang="en-US" xml:lang="en-US" xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Server Drive Space</title>
<style type="text/css">
.serverName { text-align:center; font-family:"' + $server_name_font + '"; font-size:' + $server_name_font_size + `
'; font-weight:bold; background-color: ' + $server_name_bg_color + '; border: 1px solid black; width: 150px; }
.headings { text-align:center; font-family:"' + $heading_font + '"; font-size:' + $heading_font_size + `
'; font-weight:bold; background-color: ' + $heading_name_bg_color + '; border: 1px solid black; width: 150px; }
.data { font-family:"' + $data_font + '"; font-size:' + $data_font_size + '; border: 1px solid black; width: 150px; }
#dataTable { border: 1px solid black; border-collapse:collapse; }
body { background-color: ' + $background_color + '; }
#legend { border: 1px solid black; ; right:500px; top:10px; }
</style>
<script language="JavaScript" type="text/javascript">

</script>
</head>
<body>'
$html_footer = '</body>
</html>'
# Start to create the reports file
Add-Content $html_file $html_header
# Retrieve the contents of the server.txt file, this file should contain either the
# ip address or the host name of the machine on a single line. Loop through the file
# and get the drive information.
Get-Content $server_file |`
ForEach-Object {
# Get the hostname of the machine
$hostname = Get-WmiObject -Impersonation Impersonate -ComputerName $_ -Query "SELECT Name From Win32_ComputerSystem"
$name = $hostname.Name.ToUpper()
Add-Content $html_file ('<Table id="dataTable"><tr><td colspan="3" class="serverName">' + $name + '</td></tr>
<tr><td class="headings">Drive Letter</td><td class="headings">Total Size</td><td class="headings">Free Space</td></tr>')
# Get the drives of the server
$drives = Get-WmiObject Win32_LogicalDisk -Filter "drivetype=3" -ComputerName $_ -Impersonation Impersonate
# Now that I have all the drives, loop through and add to report
ForEach ($drive in $drives) {
$space_color = ""
$free_space = $drive.FreeSpace
$total_space = $drive.Size
$percentage_free = $free_space / $total_space
$percentage_free = $percentage_free * 100
If ($percentage_free -le 5) {
$space_color = $very_low_space
}elseif ($percentage_free -le 10) {
$space_color = $low_space
}elseif ($percentage_free -le 15) {
$space_color = $medium_space
Add-Content $html_file ('<tr><td class="data">' + $drive.deviceid + '</td><td class="data">' + (ConvertBytes $drive.size) + `
'</td><td class="data" bgcolor="' + $space_color + '">' + (ConvertBytes $drive.FreeSpace) + '</td></tr>')
# Close the table
Add-Content $html_file ('</table></br><div id="legend">
<Table><tr><td style="font-size:12px">Less then or equal to 5 % free space</td><td bgcolor="' + $very_low_space + '" width="10px"></td></tr>
<tr><td style="font-size:12px">Less then or equal to 10 % free space</td><td bgcolor="' + $low_space + '" width="10px"></td></tr>
<tr><td style="font-size:12px">Less then or equal to 15 % free space</td><td bgcolor="' + $medium_space + '" width="10px"></td></tr>
</table></div>')
# End the reports file
Add-Content $html_file $html_footer
# Email the file
$mail = New-Object System.Net.Mail.MailMessage
$att = new-object Net.Mail.Attachment($html_file)
$mail.From = $from_address
$mail.To.Add($to_address)
$mail.Subject = "Server Diskspace $date"
$mail.Body = "The diskspace report file is attached."
$mail.Attachments.Add($att)
$smtp = New-Object System.Net.Mail.SmtpClient($email_gateway)
#$smtp.Credentials = New-Object System.Net.NetworkCredential($smtp_user,$smtp_pass)
$smtp.Send($mail)
$att.Dispose()
# Delete the file
Remove-Item $html_file
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

PowerShell Script to get the details Like Scope,Last Deployed date and Name for a Solution Deployed in the Farm.

Hi Experts,
I am trying to build a PowerShell Script to get the details Like Scope,Last Deployed date and Name for a Solution Deployed in the Farm.
Can anyone advise on this please.
Regards

Get-SPSolution|Select Name,Scope,LastOperationResult,LastOperationEndTime|Export-CSV "SPInstalledSolutions.csv" -NoTypeInformation
SPSolution properties
Get-SPSolution
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

How to get the status of service in rac

Dear all,
how to get the status of service in rac.
SQL> show parameters service;
NAME                                 TYPE        VALUE
service_names                        string      DEVDB, DEVDB1, devdb
[oracle@rac1 ~]$ srvctl status service -d devdb -s devdb
PRKO-2120 : The internal database service devdb cannot be managed with srvctl.

user7244870 wrote:
Dear all,
how to get the status of service in rac.
SQL> show parameters service;
NAME                                 TYPE        VALUE
service_names                        string      DEVDB, DEVDB1, devdb
[oracle@rac1 ~]$ srvctl status service -d devdb -s devdb
PRKO-2120 : The internal database service devdb cannot be managed with srvctl.
Internal services cannot be managed with srvctl utility. Check if you have any user defined service in dba_services
SQL> desc dba_services
Name                                      Null?    Type
SERVICE_ID                                         NUMBER
NAME                                               VARCHAR2(64)
NAME_HASH                                          NUMBER
NETWORK_NAME                                       VARCHAR2(512)
CREATION_DATE                                      DATE
CREATION_DATE_HASH                                 NUMBER
FAILOVER_METHOD                                    VARCHAR2(64)
FAILOVER_TYPE                                      VARCHAR2(64)
FAILOVER_RETRIES                                   NUMBER(10)
FAILOVER_DELAY                                     NUMBER(10)
MIN_CARDINALITY                                    NUMBER
MAX_CARDINALITY                                    NUMBER
GOAL                                               VARCHAR2(12)
DTP                                                VARCHAR2(1)
ENABLED                                            VARCHAR2(3)
AQ_HA_NOTIFICATIONS                                VARCHAR2(3)
CLB_GOAL                                           VARCHAR2(5)http://docs.oracle.com/cd/B19306_01/rac.102/b14197/srvctladmin.htm

How to get the status of the method

Hi,
I have created a services and method to start the processes.
Method:
#!/sbin/sh
. /lib/svc/share/smf_include.sh
case "$1" in
'start')
/usr/local/proce start
sleep 10
'stop')
/usr/local/proce stop
echo "Usage: $0 { start | stop }"
exit 1
esac
exit $SMF_EXIT_OK
Here am exit with SMF_EXIT_OK.
How can I get the status of start and stop whether it is successful or failure.
In the place of SMF_EXIT_OK I need to return the status of start and stop.
Please help me in solving this.
When i check in smf-include.sh , i got the following exit level
SMF_EXIT_OK=0
SMF_EXIT_ERR_FATAL=95
SMF_EXIT_ERR_CONFIG=96
SMF_EXIT_MON_DEGRADE=97
SMF_EXIT_MON_OFFLINE=98
SMF_EXIT_ERR_NOSMF=99
SMF_EXIT_ERR_PERM=100
Regards,
Kalai

ss

How can I get the status bar back on my web page

I want to get the status bar on the bottom of the web page so that I can slide from left to right if an article is too large for my monitor. I had it this morning 1-5-15. After checking out Thunderbird as an option for my email, the bar disappeared after uninstalling Thunderbird. I know about hovering over the web pages I have on my menu bar, but I would rather have the entire bar at bottom of page.
The gray bar shows up in my email only. I would like to have it on all my websites.
Thank you.

Does the scroll bar appear if you maximize the window or possibly switch to full screen mode via F12?
You can try to open the system menu via Alt+Space and see if you can resize the window in case the current window is too high and the horizontal scroll bar falls off.
Try to open a new window in case there is a problem with the current window.
You can check for problems caused by a corrupted xulstore.rdf file.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How can i get the status of the loaded database in OCI ??

Hi, buddy!
Now i wanna get the status of the loaded database,example MOUNT, NOMOUNT,OPEN. Can i use the OCI interface to get it? if it like that,
how can i do? Otherwise, is there another way to do in program??
thanks!!

My friend, thank you very much for your help!
I have tryed according to you advice. The result is that i can connect database successfully only when the database is in the OPEN mode. I use the V$DATABAES table to find the open_mode and of course the result is OPEN, so it's correct.
But when the database is in the MOUNT or NOMOUNT mode, i can't connect the database successfully.It will throw the exception "ORA-01033: ORACLE initialization or shutdown in progress".
Could you tell me why? Special thanks!!!
Message was edited by:
user588906

Script to get the status of a PW in 365

Similar Messages

Maybe you are looking for