How to get the status of the method

Hi,
I have created a services and method to start the processes.
Method:
#!/sbin/sh
. /lib/svc/share/smf_include.sh
case "$1" in
'start')
/usr/local/proce start
sleep 10
'stop')
/usr/local/proce stop
echo "Usage: $0 { start | stop }"
exit 1
esac
exit $SMF_EXIT_OK
Here am exit with SMF_EXIT_OK.
How can I get the status of start and stop whether it is successful or failure.
In the place of SMF_EXIT_OK I need to return the status of start and stop.
Please help me in solving this.
When i check in smf-include.sh , i got the following exit level
SMF_EXIT_OK=0
SMF_EXIT_ERR_FATAL=95
SMF_EXIT_ERR_CONFIG=96
SMF_EXIT_MON_DEGRADE=97
SMF_EXIT_MON_OFFLINE=98
SMF_EXIT_ERR_NOSMF=99
SMF_EXIT_ERR_PERM=100
Regards,
Kalai

Similar Messages

LabVIEW DSC: How to get alarm status from the area?

Colleagues,
I have, lets say, 50 Shared Variables where alarming enabled. Some of these variables assigned to area, so I can get status of the entire area or acknowledge an entire area of alarms (prior to version 8.x there was groups of the tags).
Now I would like to get alarm status from the entire area. How can I do it?
In version 6 I was able to wire tag group to Get Alarm Summary Status. Now, in version 8, Alarm Status.vi can be wired to the array of the variables, but not to area. Is it possible to get all variables from the area?
regards,
Andrey.

I am not sure if I should be posting my problem under this particular topic. I am having trouble understanding acknowledge alarm vi and what this vi is supposed to do is not clear to me yet.
I have around 300 shared variables in my project and I have created a particular vi just to view the alarms that may pop up during runs. I created a main menu and this alarm vi can be accessed upon a button click in the main menu. Users get alarm alert based on sound configuration. Then he can navigate to the alarm vi and acknowledge the alarm. The alarm vi only contains alarm and event display found under DSC module.
The problem is everytime I click the alarm button in the main menu, it takes around 2 minutes for the alarm vi to update which is very annoying and unsatisfactory in the middle of run. I am not sure why it happens and I haven't got any response from support yet. These shared variables are managed under 10 different library files that are set up based on different loops of the process (flow, pressure and so on).
Then I looked into three alarm examples that ship with DSC module. None of these examples use acknowledge alarm vi. I implemented another vi similar to alarm demo vi in that example - containing multicolumn listbox. I created acknowledge event containing acknowledge button and used the acknowledge alarm vi under this event. Read vi alarm is under timeout event.
When I click the acknowledge button as soon as I see the alarm in multicolumn listbox, nothing happens - the color of font does not get changed to purple neither any alarms get acknowledged. I tried to aknowledge alarm by variable name or alarms or alarm area, it does not give me anything. What is this acknowledge alarm supposed to do? I tried to find examples everywhere in the web that uses this particular vi and haven't found one yet.

How can i get the status of the loaded database in OCI ??

Hi, buddy!
Now i wanna get the status of the loaded database,example MOUNT, NOMOUNT,OPEN. Can i use the OCI interface to get it? if it like that,
how can i do? Otherwise, is there another way to do in program??
thanks!!

My friend, thank you very much for your help!
I have tryed according to you advice. The result is that i can connect database successfully only when the database is in the OPEN mode. I use the V$DATABAES table to find the open_mode and of course the result is OPEN, so it's correct.
But when the database is in the MOUNT or NOMOUNT mode, i can't connect the database successfully.It will throw the exception "ORA-01033: ORACLE initialization or shutdown in progress".
Could you tell me why? Special thanks!!!
Message was edited by:
user588906

How to get the status of the backgroud job?

Hi all,
I have a job, there are two steps. I have checked in the table TBTCP, the status is always 'P', which means:job step scheduled, even the step is finished. How can we get the status of every step? Many thanks in advance!

try FM BP_JOB_STATUS_GET
but Table TBTCO(field-status) gives the status of the job i.e whether scheduled,released,active,finished,ready or terminated job.
check following tables
TBTCJSTEP - Background Job Step Overview
TBTCO - Job Status Overview Table
TBTCP - Background Job Step Overview
Message was edited by:
Vasu G

How to maintain the status of the Thread ?

How to maintain the status of the Thread ?
namanc

I want to know whether a particular thread (java
application) is completed successfully or not ...
If the thread is not completed successfully then I
want to restart the Thread.
Actually this is the Task Scheduler Application ...
If the particular task is not running successfully
then I want to start the Task again ...
namancThen it could look something like this: // loading the queue
for each task
    add task to list of incomplete tasks
    enqueue task in work queue
// dispatcher
while !done()
    task = workQueue.dequeue();
    New Thread(task).start();When a task finishes, it can call a callback method on the dispatcher. The dispatcher looks at the task's status. If it finished successfully, the task gets removed from the list of incomplete tasks. Else it goes back on the work queue.
There will be some syncing issues involved. You'll have to use wait() and notify()/notifyAll() to handle the situation where the work queue is empty, and all incomplete tasks are being worked on. And the case where the dispatcher wakes up after the notifyAll() and there's nothing to dequeue and nothing in the list of incomplete tasks.
Clearly it needs some fine tuning, but I hope you get the idea.

I am using the window xp and firefox 6. I see many videos on youtube. How I get that videos from the catch folder and where is it?

I am using the window xp and firefox 6.
I watch the youtube videos online.
How I get that video from the catch folder and where that catch folder are situated in the window xp.

''How can I view or retrieve a video from Firefox's cache''
To actually view/retrieve the file from the cache and its web address you can use
the "Cache Viewer" extension 32.8KB
* https://addons.mozilla.org/firefox/addon/cacheviewer/
* http://dmcritchie.mvps.org/firefox/firefox.htm#cacheviewer
For you to be able to view the cached file you would have had to have watched the entire file.
The latest version of the extension is 0.7b available in all versions you would have to override compatibility by any of these methods
* checking or pick up one of the xpi versions in the reader comments for Firefox 6.0
* extensions.checkCompatibility.6.0 set to False
*: http://kb.mozillazine.org/Extensions.checkCompatibility
* or with an extension "Add-on Compatibility Reporter" (84.0 KB) seems preferred in this group
*:https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
There are also extensions such as Video downloader 132.8 KB
* Download YouTube Videos + Flash Video Downloader / Download-Helper
*:https://addons.mozilla.org/firefox/addon/download-youtube-videos/
 Please mark "Solved" one answer that will best help others with a similar problem after you've tried several things.

How to get a snapshot of the first frame inside application.onPublish?

Hi there!
application.onPublish = function (client, p_stream)
//How to get a snapshot of the first frame and save it to a specified directory?
//Or post the snapshot image to a specified URI for restoring?
Anyone knows how to do this ?
Regards!

This can be accomplished 2 ways that i know of ffmpeg and PHP with the php way flash takes a snapshot of the videoframe and then sends it PHP to be saved as a jpeg....with the ffmpeg way you simply batch process the entire directory holding the flv wich is external to flash although this can also be automated using PHP........I can send you a package containing both methods but installation will be up to you.............unless you wanted to pay me to help. I'm busy and can't do probono work right now.

Restored my 4S. How to get pictures back from the cloud?

Background: I had a 3GS and on launchday of the 4S I picked one up. A white 32GB on AT&T to be exact.
I had been having some issues with the battery, so today I figured I'd try and start fresh. Well, I backed up everything on the cloud, and I also backed up everything onto the computer in iTunes when I did the restore.
I've got my music back. Cool.
I've got my apps back. Great.
I can't seem to figure out how to get my photos from the camera roll back. Nor do I know how or if it is even possible to get the photos and my old text messages back on this new restore. Also, none of my mail is coming back either.
I can see my most recent backup in the iphone settings under iCloud. And I can also see my most recent computer backup on the computer. But I'm not sure what I need to do.
Any help would be great. Thanks.

OK - understood.
There are a couple of ways of going about this. First, my recommended method:
Restore from a backup (so your photos, SMS etc are on the phone
Connect to iTunes
Set the phone to sync photos to a relevant app on your desktop (what app depends whether you're Windows or Mac) - this gets your pics onto the desktop and safe.
If you want to save SMS, use PhoneView (Mac) or TouchCopy (Windows) or similar to copy them off the phone
Restore the phone as a new device
Get the photos back the way you got music etc back - via iTunes sync
The second method entails using one of the utuilities around the place that can extract from the backup - I have no experience with them, so I don't know how well they work. That's why I go for the first method - simpler, more robust.
By the way, I came across this other method for SMS:
http://hints.macworld.com/article.php?story=20090624022758268
Hope this helps

HOW points get you privileges within the community

1. Create an account.
2. Receive welcome email: "Welcome to Apple Support Communities! ... "Participate: Check out the community by reading existing discussions and see what the latest buzz is about. Got answers? Post responses, enlighten the community, and earn points! See how points get you privileges within the community."
3. Go to link to see how points get you privileges.
4. Read what points are...
OK, so it explains how to get points and that they give you privileges, but no mention of how points get you privileges or link to that information. Not that I really care, but pointing it out. Is it just another "status" in our communities for people to feel good about [authoratative, look at me], or does it really provide something worthwhile relative to being helpful and providing Apple's support for them?

Refer to ... 'More like this', this page, right hand column, bottom entry ... 'What's the benefit of accruing points in Apple communities'
Carolyn Samit's excellent answer details all the levels and the justification for taking part in community discussions.
Personally, simply scouting around the different sections is an education in itself and I would heartily recommend you to take an interest.

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

I deleted most visited, latest headlines, getting started, yahoo, youtube, apple in mozilla's folder,how to get it back like the first time i installed? thx

i deleted most visited, latest headlines, getting started, yahoo, youtube, apple in mozilla's folder,how to get it back like the first time i installed? thx

if you hid the menu bar and the navigation bar simply press the alt button, this will bring back the menu bar and form there you can right click and select which bars you want shown

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

How do i find out the status of the ink in the HP 5510 machine?

Please can you advise how i find out what the status of the ink is in the "HP 5510" machine?

Hi,
Please use this:
From the Printer Home screen, touch the right directional key, and then touch the Ink icon to display the estimated ink
levels.
Regards,
Note: The ink icon is similar to a drp\op of water.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

How to get boot camp in the emac

how to get boot camp in the emac

Furthermore, eMacs can only emulate the Windows environment, whereas Intel CPU Macs including the iMac you have running 10.6.8 can virtualize Windows. Emulation is a poor man's solution, because software is used to replace functions that normally take place with hardware. You can use the iMac to do any data conversion before it gets sent back to the eMac over a network. See my FAQ* regarding Windows on the Mac:
http://www.macmaps.com/macosxnative.html#WINTEL

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive.

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c drive, or get the itune to open my old c drive when I log in.

might be some help on one of these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

How to get the status of the method

Similar Messages

Maybe you are looking for