Scripted Gateway Password - Update Needed

Hello,
I am implementing a Scripted Gateway RA. Everything works fine, however when I add password to the resource attributes the account shows as 'Update Needed' after being created. The account is created fine, can be updated and deleted no problem. Remove the password attribute, or use a custom password field and there is no 'Update Needed' warning. Has anyone seen this before, know what I may be missing or know of a possible work around?
Thanks in advance for any info.

Try change your user profile pic to a default one and restart, the name should be back to normal.
For the loading bar, Apple said it is normal because the spinning gear was replaced by this.

Similar Messages

User update needed after updating to Yosemite

Hi,
A few days ago I updated my MacBook Pro to Yosemite, the update was fine and everything seemed working.
First there were 2 users, my account and a guest user and my user profile had no picture and says "update needed" rather than my name. The update complete and then everything works as normal. I did a new update of Yosemite and then there were always 2 users but the note "Update needed" disappeared. Again I loaded Yosemite and since this whenever I shut down and restart my macbook, I type in my password and then there is an update. After this I can work as normal.
Any ideas how to solve this? Should I load Yosemite again?
Thanks

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Trying to do a password update but it asks me for a four digit pass code. Does anyone know if that would have been a significant date or set of letters or numbers I was prompt for in the past when I first bought my phone? Thanks.

Trying to do a password update but it asks me for a four digit pass code. Does anyone know if that would have been a significant date or set of letters or numbers I was prompt for in the past when I first bought my phone? Thanks.

It rather depends on where you are seeing the demand for a passcode. If, as I assumed, you are trying to change the password at http://appleid/apple.com then that will ask for a passcode if 2-step verification has been set up. On the other hand, if, as Csound1 has assumed, you have changed the password on that website and are trying to enter it in your phone (for which you need to sign out completely before you can do this) and are being asked for a passcode that can only be one you set yourself (unless of course the phone is second-hand in which case that would open a whole new can of worms).

Script to install/update files

i am using package maker to install templates into iweb. i have managed to set the installer up to install the files into the correct locations - but i still need to be able to do one thing.
in order for the templates to work they need to update a templates.plist file. the only way i can see package maker to do is this by giving it a script.
how can i create a script that will update the file by adding certain plist lines into alphabetical orderded lists (in the plist file)?
i cannot replace the existing file because they might all have different templates installed! it sort of needs to merge the files as in file-merger!
another sidenote - i basically have no knowledge of applescript, so dont be to hard on me
thanks,
max

Typically I would say using the shell command defaults is the way to go, but after looking at the file I don't think that will work. I don't have any templates to test this with, but this should work. It does make up a back up of your templates file to the desktop though just in case.
Currently it only works with one template, but by making the theme name variable a list and throwing the main logic block in a repeat through that list it would be easy to accomodate multiple files.
-- This works for a single file. Assuming though Multple files
-- it wouldn't be hard to make a list
(* ======== Change These For Your Theme ======== *)
set _themeName to "TESTING" -- Your Templates Name
set _themeVersion to "1.1" -- Some sort of version or compatability indicator??
(* === Nothing here down should need to be changed === *)
set _keys to {"About Me", "Blog", "Movie", "Photos", "Podcast", "Blank", "Welcome"}
set _deskPath to path to desktop as Unicode text
set _backupFolder to "iWeb Backup"
set _backupPath to _deskPath & _backupFolder
set _appPath to path to application "iWeb" as Unicode text
set _plistPath to _appPath & "Contents:Resources:English.lproj:Templates:TemplatesInfo.plist"
tell application "Finder"
if not (exists folder _backupPath) then
make new folder at _deskPath with properties {name:_backupFolder}
end if
tell application "Finder" to duplicate _plistPath to _backupPath
end tell
set _data to (read file _plistPath)
(* ====================== MAIN LOGIC BLOCK ======================*)
repeat with _keyValue in _keys
set _osString to ¬
" <key>" & _keyValue & "</key>
<dict>
<key>BLCategory</key>
<string>" & _keyValue & "</string>
<key>BLEntries</key>
<dict>"
set _insertString to ¬
" <key>" & _themeName & "</key>
<dict>
<key>displayName</key>
<string>" & _keyValue & "</string>
<key>fileName</key>
<string>" & _themeName & space & _keyValue & ".webtemplate</string>
</dict>"
set _theOffset to offset of _osString in _data
set _top to text 1 through (_theOffset + (count _osString)) of _data
set _bottom to text (_theOffset + (count _osString) + 1) through -1 of _data
set _data to _top & _insertString & (ASCII character 10) & _bottom
end repeat
set _osString to ¬
" <key>sortedThemes</key>
<array>"
set _insertString to ¬
" <dict>
<key>displayName</key>
<string>" & _themeName & "</string>
<key>keyName</key>
<string>" & _themeName & "</string>
<key>version</key>
<string>" & _themeVersion & " Themes</string>
</dict>"
set _theOffset to offset of _osString in _data
set _top to text 1 through (_theOffset + (count _osString)) of _data
set _bottom to text (_theOffset + (count _osString) + 1) through -1 of _data
set _data to _top & _insertString & (ASCII character 10) & _bottom
(* ==================== CLOSE MAIN LOGIC BLOCK ====================*)
try
close access file _plistPath
end try
set _fileRef to open for access _plistPath with write permission
set eof _fileRef to 0
write _data to _fileRef
close access _fileRef

[SOLVED] Script to automatically update source

Hello,i need a script to use in a pkgbuild that can
1)check this website http://fsinapsi.altervista.org/code/tre … 091228.zip for new version of the archive.
2)change the pkgver if a new version is found
3)download the archive
Maybe it's something like this (taken from the chromium pkgbuild),but i don't know how i can modify it .. thank you.
_bldname=chrome-linux.zip
_bldroot=http://build.chromium.org/buildbot/snapshots/${_bldarch}
source=('LICENSE.txt' 'chrome-wrapper.patch' "${_realname}.1.gz" "${_realname}.default"
"${_realname}.desktop" "${_realname}.sh")
noextract=(${_realname}.1.gz)
# trick re-determining the build revision and, or entertain the hidden
# makepkg option --forcever, huh
if [ -z "$FORCE_VER" ]; then
msg "Determining latest build revision..."
newpkgver="$(wget -qO - ${_bldroot}/LATEST)"
if [ -n "$newpkgver" -a "$newpkgver" != "$pkgver" ]; then
msg2 "Version found: %s" "$newpkgver"
FORCE_VER="$newpkgver"
else
FORCE_VER="$pkgver"
fi
fi
if [ "$FORCE_VER" = "LATEST" -a "$SOURCEONLY" -eq 0 ]; then
error "Plz omit '--forcever LATEST'; I'll auto-detect the LATEST ;)"
exit 1
elif [ "$FORCE_VER" != "$pkgver" ]; then
rm -f "$SRCDEST/${_bldname}"
devel_update
fi
build() {
if [ ! -r "$srcdir/${_bldname}" ]; then
msg2 "Downloading the latest '$CARCH/$pkgver/${_bldname}'..."
wget --no-cache -c "${_bldroot}/$pkgver/${_bldname}" \
-O "$SRCDEST/${_bldname}" || return $?
ln -fs "$SRCDEST/${_bldname}" "$srcdir/${_bldname}" || return $?
fi
Last edited by Xemertix (2010-01-01 18:30:04)

Xemertix wrote:
tomk wrote:This is PKGBUILD abuse IMO.
Yes i know,but this archive is updated frequently and generally there aren't major changes in the new versions,so a pkgbuild with a similar script may work well for some time...
So would an external script which automatically updates the PKGBUILD on your machine and then uploads it to the AUR? Simplest I can think of would involve bash, wget/curl, and a bit of sed.
You could even run every X hours if you feel like it.

I would like to script Adobe Reader updates using vbScript, PowerShell or C#

I would like to script Adobe Reader updates using vbScript, PowerShell or C#, are there any Adobe API calls I use to do this. There are several different version that I support and auto update is not an option. I do updates at a specific time of the month. I would like to write a script that would download and install the update for the currently installed version of Adobe Reader (32 or 64 bit) for the version of the OS (32 or 64bit). I can detect the OS version and the Adobe version. I can download updates but I do not want to hard code anything

Adobe Reader supports various industry standard tools for enterprise deployment. Note that a redistribition license might be needed if you are installing on behalf of others.
Here is the forum: http://forums.adobe.com/community/acrobat/acrobat_enterprise_install
Look under Getting Started for links to the documents you need.

Issue while accessing the SharePoint site - SharePoint 2010 - after Password update

SharePoint site is working until we update the password(as it is expiring, we have created a new password) .
We have updated the password in central admin.
After password update, getting the below
error.
Exception
Details: System.InvalidOperationException: Operation is not valid due to the
current state of the object.
[InvalidOperationException: Operation is not
valid due to the current state of the object.]
Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext
context) +26890024
Microsoft.SharePoint.Utilities.SPUtility.DetermineLayoutsUrl(SPWeb overrideWeb,
HttpContext context, Boolean includeLCID, Boolean doNotInitWeb) +252
Microsoft.SharePoint.Utilities.SPUtility.DetermineRedirectUrl(String
urlProposed, SPRedirectFlags flags, HttpContext context, SPWeb overrideWeb,
String queryString, String& urlRedirect) +616
Microsoft.SharePoint.Utilities.SPUtility.Redirect(String url, SPRedirectFlags
flags, HttpContext context, String queryString) +98
Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(HttpContext context)
+1077
Microsoft.SharePoint.IdentityModel.SPFederationAuthenticationModule.OnEndRequest(Object
sender, EventArgs args) +693
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+80
System.Web.HttpApplication.ExecuteStep(IExecutionStep step,
Boolean& completedSynchronously)
+171
We have gone through different articles and did below steps but there is no resolution for us
1) Verified all the SharePoint services in central admin and configured the updated service account to all the services.
2) Removed the SharePoint content DB and attached it again.
Could you please provide any pointers?
Marulasiddappa SB (Swamy)

Hi,
Please refer to Justin’s blog and see if it helps:
http://www.justinkobel.com/post/2012/04/30/SharePoint-2010-Claims%E2%80%93Operation-is-not-valid-due-to-the-current-state-of-the-object.aspx
As suggested by Alex, please provide more information about your process of changing password.
Here is an article for updating passwords on SharePoint 2010:
http://blogs.technet.com/b/seanearp/archive/2011/01/25/updating-passwords-on-sharepoint-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support

HT204291 How can I find password to Apple TV? I have forgotten password and need it to activate AirPlay. Thanks!

How can I find password to Apple TV? I have forgotten password and need it to activate AirPlay. Thanks!

Welcome to the Apple community.
Which password is it that you are looking for. If it is your airplay password, simply turn the password off in the airplay settings on the Apple TV and then turn it back on again and enter a new password.

How can I sync my new iPad with my itunes account on my 4 yr old macbook? I plugged the iPad in once and all music synced. The 2nd time it said update needed. Mac says no update available.

How can I sync my new iPad with my itunes account on my 4 yr old macbook? I plugged the iPad in once and all music synced. The 2nd time it said update needed. Macbook says no update available.

" how can I sync my iphone to my mac book without losing all the music and pictures on it?"
You cannot. Copy everything you want form the old computer to the new one, then sync it.
it basically says you have to erase your iphone to sync to a new itunes!
Correct Iphone will sync, or manually manage, with one and only one computer/library at a time. Syncing, or manually managing, to another will indeed erase the current content.

HT1338 Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need

Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need ??????

Your admin account password.

HT4623 When connecting my iphone to my computer, message appears: iphone cannot be used because itunes needs to be updated. I updated on my Mac, but it isn't transferring to my phone. Tried looking at software updates on my phone - "no updates needed"

When connecting my iphone to my computer, message appears: iphone cannot be used because itunes needs to be updated. I updated on my Mac, but it isn't transferring to my phone. Tried looking at software updates on my phone - "no updates needed"

Okay, that means with the latest iOS software, it requires the latest version of iTunes on the computer. Which computer OS platform are you using. Now you are saying that after downloading the latest version of iTunes that your iPhone is not being recognized by iTunes? Completely different thing, and the iTunes on the iPhone has nothing to do with that anyway. The iTunes on the iPhone is just for purchases.
If you are having trouble with the iPhone being recognized by iTunes, use the appropriate link for your computer OS for assistance.
Windows: http://support.apple.com/kb/TS1538
OS X: http://support.apple.com/kb/TS1591

My phone will no connection to iTunes even though I put in my password I need help

My phone will no connection to iTunes even though I put in my password I need help

Based on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
Do not change your settings.

How can I script Adobe Reader updates using vbScript, PowerShell or C#?

I would like to script Adobe Reader updates using vbScript, PowerShell or C#, are there any Adobe API calls I use to do this. There are several different version that I support and auto update is not an option. I do updates at a specific time of the month. I would like to write a script that would download and install the update for the currently installed version of Adobe Reader (32 or 64 bit) for the version of the OS (32 or 64bit). I can detect the OS version and the Adobe version. I can download updates but I do not want to hard code anything

Sabian is correct.
Most admins download the updates from the ftp site and push via AIP, GPO, SCCM, or some other method whenever it makes sense for them.
Ben

Acrobat pro 9.0 update needed

I own a DVD set of CS3 Design Standard for Mac, including a second DVD named CS3.3 including Acrobat 9.
I could not access the DVDs with the Remote Drive function of OSX (I am on a Macbook Air now, without DVD drive). Thus I downloaded CS3 from Adobe and entered the serial number. Works. However, I cannot update to 3.3/Acrobat 9 as there is no download available from Adobe for Mac.
Using a proper external DVD drive should work, I guess - if I can get hold of one, not much motivated to buy one, though.
Or is there another possibility of updating?
Many thanks in advance.

Jeff, thanks.
I'll try the USB thing.
However, I do not think that this is aspecific Acrobat issue, as the
original CS3 DVD didn't work either through remote, so I downloaded it
from Adobe, which worked fine.
C
Am 13.08.14 um 00:00 schrieb Jeff A Wright:
Acrobat pro 9.0 update needed
created by Jeff A Wright <https://forums.adobe.com/people/JeffAWright>
in /Downloading, Installing, Setting Up/ - View the full discussion
<https://forums.adobe.com/message/6634631#6634631>

HT1766 during restoring from backup, itunes is asking for password, which password i need to enter, please help

during restoring from backup, itunes is asking for password, which password i need to enter, please help

The passcode you established when you elected to encrypt your iPhone backup.

Scripted Gateway Password - Update Needed

Similar Messages

Maybe you are looking for