Scriptgen - Missing component: 4 PROBLEM

Hi everybody,
I have some problems with the scriptgen. I am using java card development kit 2.2.2 on Linux platform. while i tried to create a .scr file from .cap file, i faced with this error:
Java Card 2.2.2 Script Generator, Version 1.3
Copyright 2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
Missing component: 4
APDU script file for CAP file download generated.
I made some researche about missing component problem but i couldn't find any answer. I tried to generate script file from the samples of dev kit. but i got same error.

i still could not solve this problem, any ideas?

Similar Messages

Scriptgen problem; missing component: 4

hello all,
after compiling and converting my javacard applet to .cap format i try to load it into the smart card after using scriptgen to generate the necessary apdu commands to load the caps, but i get the warning "missing component: 4" and only the commands for header.cap and directory.cap are created. after adding the usual opening, closing and processing commands to the file, i get the 0x6425 error when trying to create the class. when removing the commands for these caps and running it in the simulator (jcwde) it works fine, it accomplishes the necessary input and output functions. anyone knows how i can handle this problem, either by having the script edited manually or having the scriptgen work correctly to produce the file i need. here is my edited scriptgen with missing cap commands:
powerup;
// select installer applet
0x00 0xA4 0x04 0x00 0x09 0xA0 0x00 0x00 0x00 0x62 0x03 0x01 0x08 0x01 0x7F;
0x80 0xB0 0x00 0x00 0x00 0x7F;
// packreadwrite/javacard/Header.cap
0x80 0xB2 0x01 0x00 0x00 0x7F;
0x80 0xB4 0x01 0x00 0x14 0x01 0x00 0x11 0xDE 0xCA 0xFF 0xED 0x01 0x02
0x04 0x00 0x01 0x07 0xD2 0x76 0x00 0x00 0x60 0x50 0x02 0x7F;
0x80 0xBC 0x01 0x00 0x00 0x7F;
// packreadwrite/javacard/Directory.cap
0x80 0xB2 0x02 0x00 0x00 0x7F;
0x80 0xB4 0x02 0x00 0x20 0x02 0x00 0x1F 0x00 0x11 0x00 0x1F 0x00 0x0B 0x00
0x15 0x00 0x3E 0x00 0x14 0x01 0x37 0x00 0x0A 0x00 0x23 0x00 0x00 0x00 0xA9
0x00 0x02 0x00 0x00 0x00 0x00 0x02 0x7F;
0x80 0xB4 0x02 0x00 0x02 0x01 0x00 0x7F;
0x80 0xBC 0x02 0x00 0x00 0x7F;
// create ReadWrite
0x80 0xB8 0x00 0x00 0x08 0x07 0xD2 0x76 0x00 0x00 0x60 0x41 0x02 0x7F;
// end installer command
0x80 0xBA 0x00 0x00 0x00 0x7F;
// select ReadWrite
0x00 0xA4 0x04 0x00 0x07 0xD2 0x76 0x00 0x00 0x60 0x41 0x02 0x7F;
// write
0x80 0x04 0x00 0x00 0x05 0x01 0x05 0x04 0x02 0x03 0x7F;
// read
0x80 0x02 0x00 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x7F;
powerdown;as can be seen from here, my AID is 0xD2 0x76 0x00 0x00 0x60 0x41 0x02. i'd appreciate any sort of help or suggestions.
thanks in advance

i still could not solve this problem, any ideas?

Missing component to access (read) a PDF file Adobe reader 8

When I try to open a PDF file it says there are some missing components to complete the operation and it sends me to the Adobe Web page (Adobe Acrobat plug in Finder) I already asked to the author of the file and followed his installation instructions but the problem remains. If I try to open it in some other computer the error message specifies the component filter/MBAS:ash is missing.

I am getting the same message, "Filter/MBAS:Ash:", that you posted on Adobeforums.com. Did you find out where to get the missing component? If so, I would appreciate your help.
Norm

"Missing component" messages in the installation logs

I installed Oracle Application Server 10.1.3 on Windows, and I found some strange entries in the installActionsxxxxx.log files:
"# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j.oem 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.soap.srv 2.2.0.0.2a.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ojsp 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ejb 9.0.1.0.1."...
This goes on for several pages. I still had the Oracle Application Server 10.1.2 installation packages on my computer, and I found out that several of the missing packages actually belong to 10.1.2, and several of them are earlier than 10.1.2.
My questions: is it a problem at all that these components are missing, or shall I ignore these log entries? If this is a problem, how to fix it?
Best Regards,
Gabor

Hi Gabor,
You can ignor these log entries. (There is a bug logged. The installer team is looking for a good way to surpress these messages.)
Regards,
Mathias

CS4 Fatal error- missing component

I just recently transferred my CS4 onto my new Mac desktop. Now, everytime I open CS4 I get the following message, Fatal error - missing component. I can push ok, and go onto my editing in phohtoshop,
but once I try to save or save as any kind of file, it tells me, can not complete your request because of a photoshop error. Is there anything I can do to fix this problem?

If I un-instsall and reinstall the app will I still have it on my computer, or will I need the serial number or anything, or will my computer still recognize it?
I just don't want my CS4 to get lost, and I'm afraid I might not be able to find my serial # I have for my photoshop to reinstall. Not sure what reinstalling consists of.

Missing component printer Lexmark

I try to install my Lexmark printer but I have a problem. This is the error:
"Missing component: /Library/Printers/Lexmark/Drivers/.Resources/3600-4600 Series Color 2.lut"
I try to resolve with this guide : "sudo cp 3600-4600\ Series\ Color 1.lut 3600-4600\ Series\ Color\ 2.lut"
This isn't the solution.

Hi,
You need to uninstall the printer’s software.
To uninstall the Lexmark software, please click on the link UNINSTALL. Then remove the remaining files. Just click on the link on how to remove the files.
Then download the software on our website: DRIVER

Fatal error - missing component (VersionCue.framework)

I just recently installed Adobe Photoshop CS4 and everytime I try to start a project or load a picture to photoshop I get this message:
Fatal error - missing component
"/Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework "
I tried to follow the path on my computer and it only goes as far as
/Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework
that last part (in red) isnt anywhere in the files as far as i can tell.
i have tried to disable version cue in the many ways and places that it may be found according to other posts about this issue.
Nothing seems to work and I am getting frustrated. Anyone have this problem and get it resolved?
Id greatly appreciate the help.
-SKole7

SKole7,
I don't rememer whether you've trashed your preferences yet.
Try doing it first by holding down Command+Option+Shift as you launch Photoshop.
If that doesn't work, try deleting ALL preferences files manually as per:http://www.adobe.com/go/kb405012
If you get the application to launch succesfully, UNcheck all the Version Cue instances both in Bridge and in Photoshop:
and

Fatal Error - Missing Component ??

Have migrated data from old Mac to a new one. All files seem to have transferred OK but on trying to open Photoshop or any Photoshop file, I get a notification on screen which reads: 'Fatal Error - Missing Component/Library/Application Support/Adobe/Adobe Version CS4/Client/4.0.0/Version Cue/Framework'
Can you help rectify this problem?

I forgot this was not a Windows sub-forum.
Don't forget to give full information about your system and when and under what exact circumstances this occured.
http://forums.adobe.com/community/photoshop/photoshop_macintosh
This tells you how to get help in the forums:
http://forums.adobe.com/thread/375816?tstart=0

Fatal Error missing component message

I use CS4. Mac YOSEMITE. I recently migrated to a new laptop. After absent a while from PhotoShop, I tried to use it today by opening files and got this error message: FATAL ERROR Missing Component: /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework. What is this? How do I fix it?

Run the Cleaner tool and reinstall - without Version Cue.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

Illustrator CS3 Won't Work "Fatal Error - Missing Component", HELP!

HELP!
I have installed adobe illustrator CS3 and when i try to open it it comes up "Fatal Error - Missing Component" underneath stating: /Library/Application Support/Adobe/Adobe Version Cue CS3/Client/3.0.0/VersionCue.framework. Is there anything i can do? Any help would be much appreciated.

Looks like a permission problem where the folder or directory containing the framework my be not be avaiiable.
I would go to Applications/Utilities/Adobe Installers and run the Illustrator CS3 Uninstaller.
Trash the preferences if they have not been removed and check the Application Support an Cache folders to certain there are no remnants of CS3 on system.
Then reinstall. Do not install version cue with this new install.

HT1925 Itunes reinstall error 2404 missing component

I removed and reinstalled Itunes. got all the way to the end and it is stuck at Status about 2 bars from the end. I opened C programs & see Itunes & others, Bonjour and Apple Software Updates. I opened Itune & get error. Itunes component missing repair or reinstall itunes (-42404). how do i find what's missing?
really all im trying to do is access my itunes account use sync phone, ipod from my desktop PC. Which is the same error (42404 i got when trying to authorize using my old itunes version that led me to remove and reinstall new. Trying to authorize the new version Im back where i started.Missing component. It is accessable from my laptop, iphone and ipad.

Problem solved.
1. Download and install WinRAR (or 7-Zip)
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR" (or 7-Zip).
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair". (In my case, it didn't even ask to repair, it just installed it.

Help needed with missing data problem in CRVS2010

We recently upgraded the reporting engine in our product to use Crystal Reports for Visual Studio 2010 (previously engine was CR9). Our quote report, which has numerous subreports and lots of conditional formatting, started losing data when a quote took more than a single page to be printed. We knew the SQL results included the data, but the report was not printing those lines at all or sometimes printing a partial line. In addition, the running total on the report would exclude the lines that were being missed on the next page. In one example submitted by a customer, 3 lines were skipped between pages.
I think I have identified two potential issues that document the possibility of data not being included in the report.
The first potential issue is an issue with the "suppress blank section" option being checked. This issue is supposedly fixed with ADAPT01483793, being released someday with service pack 2 for CRVS2010.
The second potential issue is using shared variables. This issue is supposedly fixed with ADAPT01484308, also targeted for SP2.
Our quote report does not explicitly use shared variables with any of the subreports, but it does have several subreports, each in its own section that has the "supress blank section" option checked. We have other reports that use this feature, as well, and they are not exhibiting the problem.
One different thing about the quote report is that it has a section with multiple suppression options selected. The section has a conditional suppression formula, which controls whether the section is included at all within the report. The section also has the suppress blank section option selected. There are multiple fields within the report that are each conditionally suppressed. In theory, the section's suppress formula could evaluate to true, yet all of the fields within the section are suppressed (due to null values), and then the "suppress blank section" option would kick in.
The missing data only seems to happen when the section is not being suppressed, and at least one of the fields is being included in the report. If I clear the "suppress blank section" check box, and change the section formula to also include the rules applied to the fields in the section, the missing data problem seems to be resolved.
Is this related to ADAPT01483793? Will it be fixed in service pack 2?
If more details are needed, I would be happy to provide a sample report with stored data.

Hi Don,
Have a look at the Record Selection formula in CR Designer ( stand alone ) and when exported to RPT format opening that report in the Designer also.
There's been a few issues with => logic in the record selection formula. It could be you are running into this problem. Look for NOT inserted into your selection formula.
Oh and SP2 is coming out shortly so it may resolve the issue. But if you want you could purchase a support, or if you have a support contract then create a case in SMP and get a rep to work with you to debug the issue.
If you have not try the Trial Version of CR 2011, put it on a VM-ware image or Test PC so you don't corrupt anything for production and have a look at and test it in that designer also. If you purchase a case and it is a bug then you'll get a credit back for the case.
Don
Edited by: Don Williams on Oct 26, 2011 7:40 AM

Missing Component in Dreamweaver Trial Install?

I was hoping someone could shed some light on an issue I am having with a Dreamweaver trial I am evaluating. I downloaded and installed CS4 trial the other day with no issues. Then my computer crashed and windows automatically did a restore. When my computer came back up, Dreamweaver was not there as I probably had not rebooted since I was initially trying it. Now, I download the trial again and get some sort of "missing component" and Dreamweaver doesnt install fully and therefore doesnt work. Thoughts?

Unless the uninstall option appears in the installed programs list, you may possibly have to delete the program manually, run the cs4 clean-up script then reinstall Dreamweaver, as your reg entries etc will be corrupted for the installation.
See - http://kb2.adobe.com/cps/403/kb403995.html
PZ

The missing library problem.

I understand that there's already a lot of threads about the sudden disappearance of iTunes libraries, however I'm typing this up because I'd like to point out in a bit more detail what I'm seeing happening to my computer, and maybe have a collective of what's going on. This issue has happened to me five times in the last two months since I've updated to iTunes 11. After searching on google I know the missing library problem has existed since the early 2000s; why this glitch has yet to be fixed 13 years later is beyond me. I have personally never had this problem until updating to 11, and seeing the many other threads on here this appears to me to be an issue with this version of the software more than it has been in previous versions.
Before I continue, I have tried the following to fix it:
Simply readded my whole library. It was only wiped again a few weeks later.
Completely uninstalled and reinstalled iTunes. That didn't work either, so it's not just an updating problem.
What I haven't tried
Changing where on my computer iTunes is installed. I have no idea where on the computer might be better or if it will change anything. I have iTunes installed on its default location on my local C: disk.
Importing the music directly from my iPod into iTunes. Can this be done? If so, how? Not everything on my iTunes is a store purchase, most of it is imported CDs and also amazon purchases too. So I don't know if the transfer purchases option works. While this wouldn't fix this current issue, I would like to know how to do this if possible since it would just be a quick fix whenever this happens.
What is happening:
So each time this has happened, what occurs is that like many other people, one day I open my iTunes and everything is in order. Then the next, for no reason, all of my libraries are gone but the music is still on my computer, organized in their files the way iTunes had them done so upon importing. I can't use the .itl files in the "previous libraries" folder because they have also been re-written. Upon opening them, even if their last save was on a day I know everything was in working order, opening them does nothing but give me the same blank default page.
What isn't mentioned in a lot of the posts regarding this issue, is the sudden crop of temporary files in the iTunes folder.
The ones that have cropped up for me personally are the following:
iT 1.tmp
iT 2.tmp
iT 3.tmp
iT 4.tmp
Temp file 1.tmp
Temp file 2. tmp
Those were not there the last time I used iTunes, and they're never there on the days I've used it before and it has worked correctly. However every time my library is wiped, these files suddenly appear without fail, every time. I can't open them, I can't do anything with them except delete them. I believe I remember reading somewhere that this might be an issue regarding with how the program is saving the progress of your library changing, and that the temp files are there until it can "officially" save what has happened to your library. While I didn't change anything in my library in the last couple of weeks, I'm assuming this also counts things like play count.
My own personal opinion
Seeing just how many threads with this issue are popping up, this leads me to believe that this isn't just a problem with my personal computer or my personal install of iTunes 11. These temp files also lead me to believe that as well. In other words, whatever glitch has existed with iTunes since the early 2000s is for some reason running rampant in version 11.
TL;DR:
Please developers, actually look at this library glitch within the program itself. It can't just be an individual user's problem because way too many people are experiencing it.

No worries. You've probably run into one the other threads I've posted to but I'll add my thoughts here anyway...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied and renamed as iTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

Because of missing component (MSVCR80.dll). What to do?

Have had itunes on computer for several months. Tried to install latest version. Installer indicated was successful. Attempted to open and received error message that itunes would not open because of missing component (MSVCR80.dll). What do I need to do and how?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99699)

Scriptgen - Missing component: 4 PROBLEM

Similar Messages

Maybe you are looking for