Scripting for error messages

Hi,
1.On a selection-screen with four select -options as s_vbeln,s_vkorg,s_vtweg,s_spart. I need to validate and write a error message ' enter atleast one field' if it is executed without any values.
2.Also validation should be done that the entered value is correct or incorrect and if it is incorrect it should show the error message concerned to the fields for example if the vkorg value is entered incorrect , it should display'' please enter valid entry' respectively to all the fields.
Can anyone send me a code on how to perform this.
Thanks,
Stalin.

Using function module 'FORMAT_MESSAGE' you can capture the messages.
Here is a sample of the program code for that:
LOOP AT it_messtab.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = it_messtab-msgid
lang = it_messtab-msgspra
no = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
msg = g_msg
EXCEPTIONS
OTHERS = 0.
IF it_messtab-msgtyp = 'S'.
it_sucess-sucess_rec = g_msg.
it_sucess-lifnr = it_header-lifnr." Based on your field
it_sucess-tabix = v_lines.
APPEND it_sucess.
ELSEIF it_messtab-msgtyp = 'E'.
it_error-error_rec = g_msg.
it_error-lifnr = it_header-lifnr.
it_error-tabix = v_lines.
APPEND it_error.
ELSE.
it_info-info_rec = g_msg.
it_info-lifnr = it_header-lifnr.
it_info-tabix = v_lines.
APPEND it_info.
ENDIF.
ENDLOOP.

Similar Messages

IQ525A - Two Windows Script Host Error messages, plus folders won't close

How do I get folders to close, when right clicking will not close them? I am running Trend Micro security and also have two Windows Script Host error messages appearing. I need to click OK to proceed each time I use IQ525A/
assume IQ is running in safe mode, as start menu and bar is white.Any suggestions
Thanks
Kitcat

Crash report:
https://crash-stats.mozilla.com/report/index/ab4ee242-57f1-4a84-baef-ca2202150308
Signature shutdownhang
Start your '''Computer''' in safe mode with networking. Then start Firefox. Try '''Safe''' web sites.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode; Free Online Encyclopedia]'''
Wait a few minutes (don't go anywhere), then close it.
Is the problem still there?

Why do I keep getting Java Script address error messages?

I just installed FF on my Macbook, and am constantly getting java script address error messages popping up.

Does the below article help resolve the messages?
* [[Warning Unresponsive script - What it means and how to fix it]] < Click to see article

How do I correct an "script failed" error message?

How do I correct a "script failed" error message on my Apple TV?

Welcome to the Apple Community.
What are you doing when this occurs.

Help Needed With Scripting and Error Messages

 I am working to build a script to change orders in SAP using Java. I begun by recording steps and combining them. I am having issues with the Warning and Error Messages. Can someone help me write language to have the script enter through the warnings or errors if they pop up, but move to the next step if nothing pops up?? Some orders have the message, some do not, some have multiples... etc...
Thanks!!

Hello Jamie.
Getting popup you can use an Loop like below (this is now for Excel VBA coded):
For Each subWindow In Session.Children
 If subWindow.Name = "wnd[1]" Then
 On Error Resume Next
 Session.FindById("wnd[1]").sendVKey 0
 Session.FindById("wnd[1]/usr/btnANSWER_YES").press
 Session.FindById("wnd[1]/usr/btnSPOP-OPTION2").press
 End If
 Next
For Messages in SAP session statusbar like this:
If Session.FindById("wnd[0]/sbar").Text <> "" Then ...
To catch error Messages defined by messagetype you can use this:
If Session.FindById("wnd[0]/sbar").messagetype = "S" Then ... 'sucess messagetype
If Session.FindById("wnd[0]/sbar").messagetype = "I" Then ... 'Information messagetype
If Session.FindById("wnd[0]/sbar").messagetype = "E" Then ... 'Error messagetype
Aso...like we have in SAP
Hope this help a bit to achieve your requirements.
Best regards,
Holger

Read payload for error messages and throw a red flag in SXMB_MONI

Hello All,
I am calling a synchronous web service from PI ccBPM and getting a response back to PI ccBPM itself.
So the steps in BPM are receive(from CRM), sync step (to call web service) and a control step (to end the BPM process).
The requirement is to check if error_list node in the response from web service call has a value in it and throw an error in SXMB_MONI so that they can easily identify how many messages errored out out of thousands of messages.
This is the response structure for web service if there are errors.
<manageResponse>
<result>
 <ErrorList>
 <object>
 <hyatt>partnerupdate--NR</hyattt>
 <Message />
 <Operation>jukio</Operation>
 <User>atuser</User>
 </object>
 </ErrorList>
</result>
</manageResponse>
Again I only need to see if error_list is not empty and throw a red flag error in SXMB_MONI.
Thanks
Mike

Hi Mich,
In Response map when Error segment appear's fail the maping so that you can see the list of message in MONI. and do not need to put any conditions in MONI.
I mean in your Respoinse when ERROR_LIST segment coman under that one manatory field you select and take that field length say 20 characters.
source field->Substring (0,100) get the 100 characters from source in that case case from source it won't get 100 characters mapping will fail so that you can see the Error messages in SXMB_MONI.
Finally what I am saying do the wrong condition mapping in the response mapping so that mapping will fail.
Regards,
Venu.

Solution for Error Message RSAODS015 during transport

RSAODS015 "No fields were supplied
No details are provided for this error message
This usually means that certain InfoObjects are missing and required for the Transported Object to be activated.
example: Transporting an InfoSource may be incorrectly reported as successful even though certain InfoObjects do not exist on the target system and are required by the InfoSource. Later on if you transport an InfoPackage requiring these missing InfoOjects you will receive this error. So basically Transporting an InfoSource does not correctly report that there are missing InfoObjects.
Hope this helps.

Hi Kenneth ,
Possible reasons for this error may be :
1. all the objects are not properly collected in transports .
2.The sequence of transports should be proper ex -> infoobjects,cubes,Multiprovider,Query .
3.It may happen that any one of the object is not yet transported so higher level requests are getting failed .
Please check the object and there dependency with other objects.
Regards,
Jaya

Solution for Error Message 2122!?

Hi everyone,
I've been reading all your posts about error message 2122 and so far nothing has worked. Someone mentioned looking at the compatability tab and after playing around with it, it worked! Here's what I did...
Right click on the iTunes logo on your desktop and choose the compatibility tab. I am running Windows XP, so in the first box, for compatibilty mode, I chose to run as Windows 2000.
Click OK
Cd burn worked fine!
Let me know if anyone else has success with this.
Emzy xx
Windows XP

Go to: http://club.aopen.com.tw/faq/
In the search field in the upper left hand corner of the page, type 2122 then click the magnifying glass (hitting Return may not work).
Click on the single result called 'My DVD ReWriter (model DUW1608/1616 ARR) wouldn't burn CDs with iTunes v6 and I received an message "unknown error occurred (2122)".'
This is what you get:
"Q7374: My DVD ReWriter (model DUW1608/1616 ARR) wouldn't burn CDs with iTunes v6 and I received an message "unknown error occurred (2122)".
We are sorry to inform you that currently iTune v6 doesn't support these two DVD ReWriters, DUW1608 ARR and DUW1616 ARR.
Last Updated : Jan. 16, 2006"
Sorry for the bad news.

RE: Code for error messages & for Multiple Selection at Selection screen

Dear Friends,
Following is the code to display PO created without Purchase Requisition Nos. Please help me with the correct code to display the error messages when PO No is entered with Purchase Requisition No & also a message should come when user enters some random or wrong PO NO.
 Also, in the Selection-Screen I want PO NO, Purchase Org, Material, Plant & Date. So, please help with the code so that these options can also display the PO created without Purchase Requisition Nos.
Waiting for your valuable replies,
Suruchi.
The Code is attached herewith:
DATA: BEGIN OF itab OCCURS 0,
 ebeln TYPE ekko-ebeln,
 ebelp TYPE ekpo-ebelp,
 matnr TYPE ekpo-matnr,
 txz01 TYPE ekpo-txz01,
 menge TYPE ekpo-menge,
 meins TYPE ekpo-meins,
 banfn TYPE ekpo-banfn,
 END OF itab.
SELECT-OPTIONS: s_ebeln FOR itab-ebeln.
START-OF-SELECTION.
SELECT * INTO CORRESPONDING FIELDS OF TABLE itab
 FROM ekko
 INNER JOIN ekpo
 ON ekkoebeln = ekpoebeln
 WHERE ekko~ebeln IN s_ebeln
 AND ekpo~banfn = space.
WRITE:/ text-001,
 15 text-002,
 25 text-003,
 40 text-004,
 70 text-005,
 85 text-006.
ULINE.
LOOP AT itab.
 WRITE:/ itab-ebeln, 16 itab-ebelp, 25 itab-matnr,
 40 itab-txz01, 60 itab-menge, 88 itab-meins.
ENDLOOP.

select-options: s_ekorg for ekko-ekorg.
select-options: s_matnr for ekpo-matnr.
select-options: s_werks for ekpo-werks.
select-options: s_aedat for ekko-aedat.
Check the PO numbers here is not necessary because you are using a select-option(range), if something erroneous is typed, the program will simply not select it.
This would be a different story if you where using a parameter. Here you would do a check against EKKO in the AT SELECTION-SCREEN event.
at selection-screen.
select Single * from ekko
 where ebeln = p_ebeln.
if sy-subrc <> 0.
message E000(00).
Endif.
Regards,
Rich Heilman
Regards,
Rich Heilman

Rollover Tool Tips are NOT intuitive for error messages

Just a note for the Adobe guys here:
I've run into 2-3 occasions so far this morning that I was stymied by seemingly unresponsive DPS apps/services, only to discover the error message was hidden in a tooltip for the field.
This happened both on the Folio Producer: Organizer (the very underdocumented Export command), and a couple times in viewer builder when I would bang "next" to no avail, only to finally notice a thin red line around a field.
Not sure what the logic is for this, but that is not the proper usage of tooltips and is a pretty unfriendly experience for the user. Please, flash a big error popup in my face when there's an issue. I'd appreciate it.

In the process of making a single folio viewer, you need to use the "export" function in Organizer. I went to do so, but the button was grayed out, and the "Export" command is not documented in either the "iPad publishing companion" or the "Uning Adobe DPS" document. Export is mentioned in the online help, but it never mentions that you have to publish the folio before you can export. It was only during a call to tech support that I happened to hover over the button long enough to see the "You must publish the app" warning in the tooltip.
I now get it that "publishing" the folio is apparently a needed part of your process, but for a single issue viewer app, it never occurred to me that I needed to "publish" it, since Adobe would not be delivering the content.

Need A Fix For Error Message Safari 5.1.7 OS X Lion 10.7.4

When trying to open bingo on a Will Hill gambling site in Safari 5.1.7 OS X Lion keep getting this error message.
This worked perfect a few month ago when i last used it and it opens fine if i use Firefox.
Have reset Safari and Reset the Cache and still the same Error message.
An error has occurred.
You may need to refresh the application.
Please contact customer support if the problem persists.
Click here to close this message.
Your session has timed out.
After the current game has completed please log back into the application.

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Transcation code for error messages

hi all,
what is the transaction code for getting the system error messages?And how can I create my own error messages?
for eg: in a program, i want to show an error message to the user when the data is not showing up properly.
thnx,

Hi Sey Ni,
what is the transaction code for getting the system error messages?
Transaction code :- St22
For Short dumps and system errors
And how can I create my own error messages?
Transaction code :- Se91
To check ny Existing 1 :-
Message class - XS
Message Number - 001
To create ur Own
Create a Message Class ex:- Zmsg , click on Message tab
here u can give message in front of number assigned say 001.
check the following link:-
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/801b3e454211d189710000e8322d00/frameset.htm
U can call this message in ur ABAP program as under:-
if sy-subrc = 0.
MESSAGE E001(zmsg)."
endif.
E - Error message. I - Information message. S - Sucess message...
001 - Msg. Number.
Zmsg - Message Class.
Press F1 for more help on message.
Regards
Sachin Dhingra

HTMLB object for error message

what HTMLB object is for displaing error message
in iView?

There is a control called MessageBar.
for JSP
<hbj:MessageBar
 id="mBar"
 messageType="ERROR"
 messageText="Fatal Error">
<% myFormId.setMessageBar(mBar);%>
</hbj:messageBar>
For Dynpage:
MessageBar mb = new MessageBar("messageBar");
mb.setMessage(MessageTye.ERROR, "Fatal Error");
form.setMessageBar(mb);
form.setMessageBarAtFormEnd(true);
form.setMessageBarRequired(true);

FM for error messages

Could anyone tell me which Function Module is used to retrieve error messages in BDC? Code samples will be helpful.

Using function module 'FORMAT_MESSAGE' you can capture the messages.
Here is a sample of the program code for that:
LOOP AT it_messtab.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = it_messtab-msgid
lang = it_messtab-msgspra
no = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
msg = g_msg
EXCEPTIONS
OTHERS = 0.
IF it_messtab-msgtyp = 'S'.
it_sucess-sucess_rec = g_msg.
it_sucess-lifnr = it_header-lifnr." Based on your field
it_sucess-tabix = v_lines.
APPEND it_sucess.
ELSEIF it_messtab-msgtyp = 'E'.
it_error-error_rec = g_msg.
it_error-lifnr = it_header-lifnr.
it_error-tabix = v_lines.
APPEND it_error.
ELSE.
it_info-info_rec = g_msg.
it_info-lifnr = it_header-lifnr.
it_info-tabix = v_lines.
APPEND it_info.
ENDIF.
ENDLOOP.

Groovy expression for error message in validation

hi...
using groovy expression i want to display a dynamic error message...(ie.i have a date field the date cant be a past date..if i enter the past date like (02-04-2012 )the error message should display with this date)

For a validation rule on an entity attribute, you can use a Groovy expression to decide whether
an error or a warning message should be displayed using the following expression:
adf.error.raise("THIS_IS_AN_ERROR_MESSAGE")
adf.error.warn("THIS_IS_A_WARNING_MESSAGE")
In your case, you can customize the message and access the date attribute in the message as source.HireDate(Assuming HireDate is the date attribute)
Hope it helps.

Scripting for error messages

Similar Messages

Maybe you are looking for