Solution for Error Message RSAODS015 during transport

RSAODS015 "No fields were supplied
No details are provided for this error message
This usually means that certain InfoObjects are missing and required for the Transported Object to be activated.
example: Transporting an InfoSource may be incorrectly reported as successful even though certain InfoObjects do not exist on the target system and are required by the InfoSource. Later on if you transport an InfoPackage requiring these missing InfoOjects you will receive this error. So basically Transporting an InfoSource does not correctly report that there are missing InfoObjects.
Hope this helps.

Hi Kenneth ,
Possible reasons for this error may be :
1. all the objects are not properly collected in transports .
2.The sequence of transports should be proper ex -> infoobjects,cubes,Multiprovider,Query .
3.It may happen that any one of the object is not yet transported so higher level requests are getting failed .
Please check the object and there dependency with other objects.
Regards,
Jaya

Similar Messages

Solution for Error Message 2122!?

Hi everyone,
I've been reading all your posts about error message 2122 and so far nothing has worked. Someone mentioned looking at the compatability tab and after playing around with it, it worked! Here's what I did...
Right click on the iTunes logo on your desktop and choose the compatibility tab. I am running Windows XP, so in the first box, for compatibilty mode, I chose to run as Windows 2000.
Click OK
Cd burn worked fine!
Let me know if anyone else has success with this.
Emzy xx
Windows XP

Go to: http://club.aopen.com.tw/faq/
In the search field in the upper left hand corner of the page, type 2122 then click the magnifying glass (hitting Return may not work).
Click on the single result called 'My DVD ReWriter (model DUW1608/1616 ARR) wouldn't burn CDs with iTunes v6 and I received an message "unknown error occurred (2122)".'
This is what you get:
"Q7374: My DVD ReWriter (model DUW1608/1616 ARR) wouldn't burn CDs with iTunes v6 and I received an message "unknown error occurred (2122)".
We are sorry to inform you that currently iTune v6 doesn't support these two DVD ReWriters, DUW1608 ARR and DUW1616 ARR.
Last Updated : Jan. 16, 2006"
Sorry for the bad news.

Error message (M3024) during parallel goods movement

For publication distribution, collected unreferenced deliveries and goods issues are done in SAP system for a customer group by a program which is triggered by a web service every day. Standart SAP functionalities are used in this program. At goods issue part of program, an error message is occuring "Valuation data for material & is locked by the user &" with error code :M3024. The user who processes the program is locking himself. Also we have checked the other goods movement types in standart transactions (MB1B-MB11..)and same problem was occured. We have checked the notes that we applied before for to avoid material lock in paralel goods movement. There is nothing changed both in customizing and deveploment after upgrade. So we couldnt find the way to fix this problem. FIRST ANSWER FROM SAP***************************************** Can you kindly review the attached note 70865 with regards to this issue. WE APPLIED.-- We reviewed 70865 and this solution not applicable for our current system. According to note; We set material late lock exclusive time 15 seconds in OMJI. This solution solved material lock error at all plant level. After this solution, We get same batch error during goods movement(m3862), Then We applied note 157423, this note solved material batch lock error during goods movement, At last we have now m3024(Material valuation error lock) error during all goods movement. THEN********************************* As explained in the note 70865 , to ensure data integrity, it is necessary to block the material against updates by other users during good movements. This is achieved by blocking the material plant (lock object MARC) and the material valuation area (lock object MBEW) exclusively against othertransactions which update the material master. What you can do, as advised in the note, is to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously. The problem is that you will experience a disadvantage of performance loss after this change. Please, notice that with this change in OMJI, several users will be ableto carry out GOODS MOVEMENTS to the same material and plant simultaneously. This change will not allow the simultaneous input of a goods movement and an invoice for the same material (in this case, the material will be locked as soon as the purchase order item is adopted in the invoice and the error message M3024 will occur). When the error message M3024 occurs, you could check with transaction SM12, there you could find some tables like MBEW are locked by user. The table is locked to prevent valuation, quantity etc. to be updated. System does not check if it is standard price or MAP, as soon as you work with one material it will be locked (its valuation data has to be locked, because otherwise there is no guarantee of the consistency of the stock values. Without this lock mechanism the possibility of serious data inconsistencies could arise). your customizing under: SPRO > IMG > Material Management > Set up Material block for goods movements Here you could choose setting 2(at positing) to have only a short locking period at posting. Please review information in attached notes. 521945 FAQ: Material block 322989 Late block: Number of blocking attempts AT LAST ** PROBLEM STILL GOING ON WHAT SHOULD WE DO TO SOLVE THIS ERROR.

HI Fatih,
Refer to SAP Note 1744780 - Error message M3024 during Invoice Verification process .
In the standard system it is not possible the simultaneous entry of a GOODS MOVEMENTS and an INVOICE for the same material and the same plant.
When you enter the invoice for the purchase order item, the valuation data for the material is updated, therefore this valuation data (table MBEW) needs to be blocked so that it is not changed at the same time by any other transaction (which might cause inconsistencies).
Resolution
This system behavior can not be avoided by any customizing setting or any user exit.
This is correct system behavior to protect the other transactions update the material master.
As advised in the note 70865 :
It is possible to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously, however there is a risk to cause the data inconsistency and performance problems.

Got an error message -43 during back up step of recent update

Received an error message (-43) during back up step of recent update attempt to iOS 5 for my iPhone 4. Tried several times with the same error message. Anyone know how to get around this issue?

And now, with the new iCloud Control Panel 1.1, still an error, in English this time:
Outlook Setup Error
Your setup couldn't be started because of an unexpected error.
I was able to click the Report button, here's the beginning of the text it emailed:
Help Apple improve its products by sending us diagnostic and usage information about iCloud.
By sending this message, you agree that Apple will collect and use this information as part of its support services and to improve its products and services. To learn more about Apple's Privacy Policy, see http://www.apple.com/legal/privacy.
Your setup couldn't be started because of an unexpected error.
Error: 0x80004005: CopyPSTFoldersToCache
Error: 0x80004005: GetZ1Store
Error: 0x80004005: HrGetOneProp on Z1Store failed
AppleOutlookDAVConfig version: 3.2.16.0
Windows version (6.1.7601): Windows 7 Ultimate Edition Service Pack 1 (build 7601), 64-bit
Local app data directory test: Pass
Temp directory test: Pass
Outlook version: 14 (14.0.6109.5005), x64
Outlook location (installed): C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE
MAPI location: C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\MSMAPI32.DLL
MAPI logon succeeded
Message Stores Table:
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Hotmail Connector Store Service, 975C4FC305EB4BBBB1992A7570EC7CF9
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Contents of C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\mapisvc.inf
[Services]
NOTES=Lotus Notes Mail
MSN_CON=Microsoft Outlook Hotmail Connector
APLZODSERVICE=iCloud
[NOTES]
PR_SERVICE_DLL_NAME=nwnsp.dll
PR_SERVICE_SUPPORT_FILES=nwnsp.dll
PR_SERVICE_DELETE_FILES=nwnsp.dll
PR_SERVICE_ENTRY_NAME=ServiceEntry
continued...

How can i get a solution for this message "Your Apple ID has been disabled"?

How can i get a solution for this message "Your Apple ID has been disabled"?

Contact iTunes Store support. That message can mean one of several things:
Your credit card on file has expired
The credit card issuer has denied a charge
Your account has been hacked
Key information in your account has changed, and Apple needs to contact you to confirm the change.

Solution to error message not helpful for uploading to web gallery

Hi!
I got an error message about not being able to do this because the server was not found. I went to "help" and was told to install iphoto '08.
We have that ! Why would I need to install it?
I don't want to bother dh with this as he is about ready to throw the whole computer out as it is...so please somebody help!

We have that ! Why would I need to install it?
Have you? You're posting in the iPhoto 5 forum.
iPhoto Menu -> About iPhoto.
If you do have v7 (iPhoto 08) then is your iPhoto an upgrade? And how did you upgrade?
Regards
TD

Translation needed for error message

I ran the Additional Software and Apple Hardware Test disk that came with my IMac g5 because I've had problems recently with various programs, such as Itunes and Firefox. The error message I got during the memory test was as follows: 2MEM/1/4:DMM1/J4001. What does this mean? I have a feeling it refers to a problem with my RAM but am not sure. I did add more RAM after I got the IMAC and am wondering if the problem is in the RAM chip that I added at that time. Thanks for any help

Thanks, however, I've discovered that the version of OS X I am running is actually different than the version that came with my machine. I believe this happened because a couple years ago I brought my IMAC into the local CompUSA store to have them fix the same problem I've been having. Their solution was to re-install OS X. But they used the version current at that time--10.4.11--not the version I had on disks at home. My installation disks are for version 10.3.5. When I insert CD (not DVD) disk 1, it wants me to re-install that version and gives me no option to run Disk Utility from the disk before beginning the re-installation process.
I do have a Tech Tool Deluxe CD that came with the Apple Care Protection Plan I purchased at the time I got the IMAC. But that doesn't seem to run at all, probably because it wasn't designed for OS 10.4.11.
Now, I did just buy a brand new Macbook pro with the latest version of OS X (Leopard?) I suppose I could try using the DVDs that came with that to install that OS on my first generation IMAC. But I'm not sure if that's legal and if it would work. I did get a newer version of Tech Tool Deluxe with the Macbook, because I also bought the Protection Plan for this computer as well. I might try running the newer Tech Tool disk on the IMAC and see if that can diagnose and repair the hard disk problem that shows up when I run Disk Verify.

Windows 8.1 and most recent version of Airport Utility. Error message 6722 during connection.

New computer with Windows 8.1. I have downloaded most recent version of the Airport Utility. The utility finds by airport express but during connection I get error message -6722. I suspect Windows 8.1 is not compatible with my first generation Airport Express but before I buy a new one would like to know for sure.

More compatible than v2 of the Express which you cannot configure from windows.. all the later airport routers need v6 utility to configure them.. and this is not available for windows.
These issues arise due to all sorts of things.. the error message is very unclear in its meaning.
Plug the Express into the computer by ethernet. Do a factory reset on the Express and see if you can set it up by ethernet.
Wireless products can be a problem. Set the Express to fixed channel, 11, 6, 1 in that order.. with no security and a simply name, for both the express and wireless. No spaces and pure alphanumeric.
If the computer cannot connect under the most ideal situation nothing else will fix it.
If you have an ipad iphone with iOS v6 or later then you can use the apple version Airport utility which is much more likely to work than windows.

Long DDIC Activation for Master Data Change During Transport

Good Morning Folks,
During transport of a change to a custom master data object to production, the data dictionary activation is taking a very long time and using a very large amount of space.
The change to the master data object was adding three additional navigational attributes. This master data is not time-dependant. The master data contains about 1.2 million records and has 49 active navigational attributes u2013 including the three new ones. The Data Dictionary activation is executing report SAPLRSDU for more than 8 hours and is using upwards of 52GB of temp filespace (of 92GB allocated) during this time. To the best of our knowledge, it looks as if it is trying to recreate or repopulate the /BIC/Pxxxx table of the master data. It looks like it's reading billions of records (probably the same 1.2 m records over and over.)
There are no errors in any logs that we can see.
Previous changes to this master data object have been successful, and reasonably fast. And the transport of this change from Dev to our QA environment was very fast.
We still need to get this change in, as well as additional changes that are dependant. Why would this take so long, and is there anything we can do to get this to run faster?
BTW: We are on 3.5 (but looking forward to NW7.)
Thanks, Brian

Brian,
Usually adding nav attributes would mean that the X and y tables get regenerated...
Also do you notice reads only on the P-Table or other tables which have this object as well..?
If it is only the P Table - try refreshing the stats for the same...

Solution for Error Code 148:3

So had this error and been looking around to see if I could find a solution on the forums or the support section and could not find a concrete answer. However I did read (here http://forums.adobe.com/message/1659492#1659492) something which reminded me of changes I had made to my boot sequence recently that I decided to check up on.
I try to keep a lean system so I try and turn off services and programs from starting up when I dont need them.
This problem for me has been cause by turning off the "FLEXnet Licensing Service" through msconfig. When it was turned back on and I rebooted problem solved.
For those that are unsure if thats it and dont know what I am on about follow these instructions:
(Warning: If you dont know what your doing with the book sequence or msconfig, follow the instructions and leave everything else alone. Using this tool can cause untold problems if you dont know what your doing and you dont closely follow instructions)
1.- Press "Windows Key" + R on your keyboard or click the Start button (bottom left of screen) and then select Run.
2.- Type "msconfig" (without the quotes) and hit return.
3.- System configuration window will come up, select the Services tab.
4.- Select "Hide all Microsoft Services" and look for "FLEXnet Licensing Service".
5.- Ensure "FLEXnet Licensing Service" is selected
6.- Click Apply and then Close and choose to reboot your machine.
7.- When Windows starts up again there should be a window telling you a change has been made, tick the box so it does not come up again and click ok.
Your problem should be solved, I hope. Worked for me. I also tested it, any time I turn it off Dreamweaver stops working and when its turned back on its fine.
Hope this helps
Ethnod

wow...wssparky thanks a TON. I got the adobe error today and it was driving me INSANE. I *think* the problem had to do with my having to disable all my startup stuff in Windows7 to fix a problem I was having updating some other Microsoft software. Anyway MS said disable everything using the msconfig and it was after that when Adobe stopped functioning (my McAfee is having an issue as well) properly.
At any rate I got the adobe "fix" and it worked GREAT!
I was NOT having any luck to begin with by going to the support area at adobe.com (HEY ADOBE PEOPLE>> TAKE NOTE)
searching "support" for the error code tells me "Your search of Support for error 148:3 did not match any documents." which I find interesting
so I finally googled the error code and found this thread.
now a word to those who are less than kind in their posts and make people feel stupid for asking the question here...I would submit these forums are for us (the users) to help each other (read: be nice to each other) so we can USE the software we OWN.
I'm frankly disappointed that going to the Adobe "SUPPORT" was fruitless. MY problem was with the CS4 suite: I own the master collection which wasn't exactly cheap....it wold be nice if I, as a customer was able to at least FIND Adobe's OWN error code on their support section.
again... thanks to wssparky

Solution for error 2356

Hi, has anyone found a solution for iTunes installation error:2356?
I noticed a post since Dec last year, and no answers were found.
Still having trouble installing itunes... sigh

From http://support.apple.com/kb/TS3694#1669 :
Check for hardware issues
Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

Solution Manager - Error Message DSWP349 - No IBASE Components Exist ...

The subject error DSWP349 occurs when using transaction Notif_Create for a new Service Desk Message.
The error message points to the use of IB52/IB53 which has already been correctly (as far as I can tell) used to set up the IBASE components.
The error message also point to Note 824640 which I have checking out and also points to Note 1059271 from SAP Service Marketplace.
I am going to try and apply some of those notes' recommendations but as they do not seem directly relevant, am looking for any other suggestions in the meantime; for example, if anyone has an printout example of how the IBASE and its lovely components should look in IB52/IB53 that would be most appreciated !
Last point. Maybe part of the problem is that our SAP Solution Manager only links to one other internal SAP system and is not 'connected' to SAP AG (as it is an external system - this for security reasons), however we do have, for example, some external RFCs entered as part of the configuration.
Thanks all.

Hi
The issue is now resolved, this is how I did it.
1) Removed entries from BCOS_CUST from client 000 for OSS_MSG which was pointing to the RFC name
Then got another error:
No RFC connection to the central lock information management system.
The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
2a) Ran the report in SA38 TMW_CONTROL_PROJECT_LOCK with selection for Deactivate the "project lock functionality".
2) Filled the "Deactivate Project Lock" field with "X" then clicked EXECUTE.
Problem got Solved.
Thanks
Ashish

Client security solution TPM error message

I'm running XP on my T61 thinkpad and recently I started getting the following error message upon starting my computer:
"There was a problem connecting to the TPM (security device) on this computer. It is possible that anti-virus or firewall software is blocking the connection. A missing or disabled device driver could also cause this problem. Please refer to the online documentation for more information."
My thinkpad has also been starting to blue screen lately but I'm not sure if this is connected to the client security solution problem or not. If anyone has any suggestions I'd really appreciate it!

Who has client security, restore and fingerprint reader all working together? I did updates and when one works the other doesn’t. If I could find all three that work I would be happy. If you give me your versions numbers that works on yours that would be great. I have a T60 running XP

Rollover Tool Tips are NOT intuitive for error messages

Just a note for the Adobe guys here:
I've run into 2-3 occasions so far this morning that I was stymied by seemingly unresponsive DPS apps/services, only to discover the error message was hidden in a tooltip for the field.
This happened both on the Folio Producer: Organizer (the very underdocumented Export command), and a couple times in viewer builder when I would bang "next" to no avail, only to finally notice a thin red line around a field.
Not sure what the logic is for this, but that is not the proper usage of tooltips and is a pretty unfriendly experience for the user. Please, flash a big error popup in my face when there's an issue. I'd appreciate it.

In the process of making a single folio viewer, you need to use the "export" function in Organizer. I went to do so, but the button was grayed out, and the "Export" command is not documented in either the "iPad publishing companion" or the "Uning Adobe DPS" document. Export is mentioned in the online help, but it never mentions that you have to publish the folio before you can export. It was only during a call to tech support that I happened to hover over the button long enough to see the "You must publish the app" warning in the tooltip.
I now get it that "publishing" the folio is apparently a needed part of your process, but for a single issue viewer app, it never occurred to me that I needed to "publish" it, since Adobe would not be delivering the content.

Error message occurs during CS5 Master Collection Trial Install.

I downloaded the trial version of CS5 Master Collection from the Adobe site. Everything works until after I enter my password to start installation an error message comes up saying:
The Setup encountered and error(-1) during install. Please restart the machine and try again.
I've done that and it still shows the same message! What do I do?

Since CS5 is from 4+ years before the Cloud, this is not the right forum... but I don't really know a correct forum for that very old product
Have you tried to manually update the individual programs?
All updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

Solution for Error Message RSAODS015 during transport

Similar Messages

Maybe you are looking for