Scripting the Login Banner

I'm not sure if this question is in the right place, so feel free to advise or move it :)
I'm changing some configurations on a bunch of routers (a LOT) so I've written some expect scripts. Its all kicked off by a script that reads an IP address from a file, and passes it to an expect script that logs on to the router who's address it is, then opens a third file which consists of a series of plain-language IOS commands. The commands are issued to the router and the config is done. Nothing clever here, its been done a few times before. However, I'm trying to write a Login Warning banner. The banner command goes across OK, the first line of the banner goes across, then the script hangs. I *think* its because after each line within the "banner" config, there is an "empty" newline, nothing to trigger the expect script driving the commands, so it sits there waiting for something that never comes.
I've tried making the banner command a single line with "\n" separating it into the format I want, that doesn't work. I also tried with 0x0a (ascii newline) but that didn't work either.
has anybody done this successfully, and where am I going wrong?
Thanks
Jim

OK, I fixed it. Expect is waiting for the # prompt before it provides the next line. If you end each line of the banner with a #, it works, even though the C/R and # are round the wrong way. It may not be the most tidy programming but it works

Similar Messages

Scripting the login window

is there a way to get past the login window using Applescript. Like system events. My goal is to log in even though you have to get past the log in window.

Automatic login and no password?
Just turn on the computer.

Creating a warning banner at the login screen in solaris 10 GNOME

Does anyone know how to create a a warning banner at the login screen in solaris 10 GNOME so users have to hit OK or Enter before typing in their username?
A million thanks,
Johnny Mac

I have had problems after the 10.5.2 update. I ended up with a frozen computer - unable to restart or shut down etc. Also ended up at one stage with Set Up Assistant screen. With the help of a computer savvy friend, at least I am able to use my computer again.
It appears the actual download did happen but it did not install and the computer tells me I need to "re-start". When I did this, window appeared on plain blue screen saying it was installing software but absolutely nothing happened - no blue scrolling bar etc.
My iMac computer is still under Apple Care Plan and technician told me they are many problems surfacing across the various machines with this upgrade. He has asked me to delay updating the software and to ring back in a couple of days because their technicians are currently working on the problem and he hopes for an answer soon.

Creating a new OU and the login scripts don't work

Goodday,
We are running DSfW for almost a year and we never had to make a new OU but that time has come.
When I make a new OU (with iManager or AD tools) the outcome is the same: The login scripts I make for the new OU will not execute within iManager.
If I make a new (test)user of move an existing user (with or without a GW account) the login script is not executed.
If I place a login script directly on the user it works.
I've patched everything and is up-to-date.
What is different on exisiting OU's and new OU's is that it's missing two attributes:
ACL 2#entry#ou=...#loginScript
ACL 2#entry#ou=...#printJobConfiguration
Maybe this has nothing to do with it but the first one I was thinking maybe this is the problem.

Originally Posted by preemeyer
Goodday,
We are running DSfW for almost a year and we never had to make a new OU but that time has come.
When I make a new OU (with iManager or AD tools) the outcome is the same: The login scripts I make for the new OU will not execute within iManager.
Can you please give the details of how you are specifying the login script. Is it using a GPO?
Originally Posted by preemeyer
If I make a new (test)user of move an existing user (with or without a GW account) the login script is not executed.
If I place a login script directly on the user it works.
Is it by specifying the script path in existing profile tab?
Originally Posted by preemeyer
I've patched everything and is up-to-date.
What is different on exisiting OU's and new OU's is that it's missing two attributes:
ACL 2#entry#ou=...#loginScript
ACL 2#entry#ou=...#printJobConfiguration
Maybe this has nothing to do with it but the first one I was thinking maybe this is the problem.
Can you check if the container is samified, and samify it if it is not.
domaincntrl --samify
May not work, but can be tried.

Login banner

Hello,
Would like to add a login banner pop-up when I users connect to my home network. This will assure me that they have connected correctly and securely.
thanks

neighbour_devil wrote:
Hope this helps
http://is.depaul.edu/_downloads/2_logonbanners.pdf#search=%22login%20banner%2Bconfiguration%22
Thanks, I'll assume that Cisco has a banner file and there is a way to edit that, am I correct? If not what is the default verbiage for the banner login script?

Run a shell script at login?

I would like to run a simple shell script each time a user logs in. Currently, I have it wrapped in an Automator executable that is included in "Login Items", but figured there must be a more elegant way? Thanks.
More info:
The problem I'm trying to solve is that of file permissions when sharing one iTunes and one iPhoto library between multiple users on one computer. The libraries are located in /Users/Shared and the apps were pointed to the relocated libraries by holding down 'Option' on startup. The problem is that work done by each user in the iTunes or iPhoto library inherits the default permission settings of that user, making any new additions to the libraries, read-only to the other users. I'm using `chmod` on login to fix it. Let me know if you know of a better way to address this. Thanks again.

I wrote a simple shell script that executes each time a user logs in (well, actually, each time I log in, coz' it's not really applicable to other users). It syncs my work and home addressbooks and iCal calendars to one another.
I named it "sync". Then I read somewhere that if you wanted to make it double-clickable (to launch it from the Finder), I appended a ".command" filename extension (so it's now named "sync.command"). I also did a chmod 755 to that file so that it had execute privileges. Depending on whether you give each user their own copy of this thing, or keep a single copy in, say, the /Users/Shared directory, you may have to play around with chmod. Whatever, just so long as the user that has just logged in has execute permissions to the file, and to the entire path to the file, you should be good.
Then, in SysPrefs > Accounts > Login Items, I added that "sync.command" file to the list. So, really the only difference is I'm not wrapping mine inside an Automator script like you are.
I had tried adding it to ~/Library/LaunchAgents and make a launchd plist for it, that would kick it off at login. But I didn't get that to work. Don't know why. But just adding the double-clickable executable unix script to the Login Items list did the trick. Whether the plist has to hang out there with it, I don't know. I still have it there, though, in case I ever get motivated to figure out what's wrong with my launchd plist file. So, if just adding it to the Login Items list doesn't do it for you, you could try making a (functional?) launchd plist for it and plopping them both in ~/Library/LaunchAgents, too. That's how I am now, and, like I said, it launches at user login as that user's process (not as a root process like the above referenced article said how login hooks worked -- although, you may want it to run as root since you want this to work with multiple users...in which case, you might want to listen to Cole and not me...).

Problems with the login page in Portal release 2

Hi,
I have problems logging into portal, release 2 on Linux. I get the following error message when clicking the login link:
Forbidden
You don't have permission to access /pls/orasso/orasso.wwsso_app_admin.ls_login on this server.
This used to work until I changes the password for the orasso user using 9IAS Enterprise Manager. The portal home page works fine. I've tryed to run the ssooconf.sql script, but this didn't help me much.
Does anyone have any solution to this problem?
Kjetil

That's just a display of the license agreement. The login page is always at:
http://127.0.0.1:8000/apex
(You have to put the directory on there)
~Jer

Capturing the Message on the Login Page (Invalid user/password expired etc.

Hi, I have a requirment for capturing the error message on the Login page if the User's Account is expired or Account is Disabled or Invalid credentials, Password Lockout etc.
I am using the attached login page. Can any one please help me out on this.
<html><head><title>AARPLogin Page</title>
<script type="text/javascript" language="JavaScript" xml:space="preserve">
// This function automatically gets called for broswer detection
var isNav4 = false;
var isIE4 = false;
var isNS6 = false;
function obDetectBrowser()
if ( navigator.appVersion.charAt( 0 ) == "4" )
if ( navigator.appName == "Netscape" )
isNav4 = true;
} else {
isIE4 = true;
else
if ( navigator.appVersion.charAt( 0 ) >= 5 )
if ( navigator.appName == "Netscape" )
isNS6 = true;
obDetectBrowser ();
var HOSTNAME =
var COOKIE_OBREQUESTEDURL = "OBREQUESTEDURL";
var COOKIE_OBFORMLOGINCOOKIE = "ObFormLoginCookie";
var NCID_LANDING_PAGE_URL = "/landing/";
var QS_REDIR = "ReDir";
var keyChooser;
function checkPasswordEnterKey( event )
var form = document.forms[0];
if (isNav4 || isNS6) {
keyChooser = event.which ;
} else if (isIE4) {
keyChooser = window.event.keyCode;
if (keyChooser == 13) {
if (
form.userid.value
&& form.userid.value != ""
&& form.password
&& form.password.value != ""
form.submit();
return true;
else
alert('Please enter a UserId and Password');
return false;
function showHidePanel( panelID, displayValue )
var panelElement = document.getElementById( panelID );
if ( displayValue == 'show' )
panelElement.style.display = 'block';
else
panelElement.style.display = 'none';
function getQueryVariable( variable )
var query = window.location.search.substring( 1 );
var vars = query.split( "&" );
for ( var i=0; i < vars.length; i++)
var pair = vars[ i ].split( "=" );
if ( pair[ 0 ] == variable )
return unescape( pair[ 1 ] );
return "";
function Get_Cookie( name )
var nameEQ = name + "=";
var ca = document.cookie.split( ';' );
for( var i=0; i < ca.length; i++ )
var c = ca[ i ];
while ( c.charAt( 0 )==' ' )
c = c.substring( 1, c.length );
if ( c.indexOf( nameEQ ) == 0 )
return c.substring( nameEQ.length, c.length );
return null;
function Set_Cookie( name, value, expires, path, domain, secure)
document.cookie = name + "=" + escape( value ) +
( ( expires ) ? ";expires=" + expires.toGMTString() : "" ) +
( ( path ) ? ";path=" + path : "" ) +
( ( domain ) ? ";domain=" + domain : "" ) +
( ( secure ) ? ";secure" : "" );
function Delete_Cookie( name, path, domain )
if ( Get_Cookie( name ) )
document.cookie = name + "=" +
( (path) ? ";path=" + path : "" ) +
( (domain) ? ";domain=" + domain : "" ) +
";expires=Thu, 01-Jan-1970 00:00:01 GMT";
function lostPassword()
var CurrentLogin = document.forms[0].userid.value;
if ( CurrentLogin == "" ) {
alert ( "Please enter your eMail Address." );
document.forms[0].userid.focus();
else {
Set_Cookie( COOKIE_OBFORMLOGINCOOKIE, "done", 0, "/" );
var LOST_PWD_PAGE = "/identity/oblix/apps/lost_pwd_mgmt/bin/lost_pwd_mgmt.cgi?program=passwordChallengeResponse&login="+CurrentLogin+"&backUrl=http://oradev2.na.aarp.int/login/login.html&target=top";
window.location = LOST_PWD_PAGE;
function emailPassword()
document.passform.submit();
function onLoad()
if (getQueryVariable( "MSG" ) == 'LOGIN_FAILED' )
alert ("Login Failed, Please try again");
else if (getQueryVariable( "MSG" ) == 'PWD_EXP' )
alert ("Your Password Is About to Expire. Please Change it at your earliest convenience.");
var pwdExpUID = getQueryVariable( "login" );
var hostTarget = getQueryVariable( "hostTarget" );
var resURL = getQueryVariable( "resURL" );
var PWD_EXP_PAGE = "/identity/oblix/apps/lost_pwd_mgmt/bin/lost_pwd_mgmt.cgi?program=redirectforchangepwd&login="+pwdExpUID+"&backURL="+hostTarget+resURL+"&target=top";
window.location = PWD_EXP_PAGE;
else if (getQueryVariable( "MSG" ) == 'CHGPWD' )
alert ("You are required to change your password.");
var chgPwdUID = getQueryVariable( "login" );
var hostTarget = getQueryVariable( "hostTarget" );
var resURL = getQueryVariable( "resURL" );
var CHG_PWD_PAGE = "http://"+HOSTNAME+"/identity/oblix/apps/lost_pwd_mgmt/bin/lost_pwd_mgmt.cgi?program=redirectforchangepwd&login="+chgPwdUID+"&backURL="+hostTarget+resURL+"&target=top";
window.location = CHG_PWD_PAGE;
</script></head><body onload="onLoad();document.login.userid.focus();" alink="blue" bgcolor="#ffffff" link="blue" vlink="blue">
<p align="center">
<img alt="AARP Header Logo" src="login_files/aarpLogo.gif" border="0" height="91" width="219">
<br>
</p><form name="login" method="post" action="/access/oblix/apps/webgate/bin/webgate.so">
<div class="boldText" align="center">
<h2>Login</h2>
<div class="boldText" align="left">
<div id="LoginFailed" style="display: none;">
<table align="center" bgcolor="#ff0000" border="0" cellpadding="2" cellspacing="0" width="500">
<tbody><tr>
<td>
<table bgcolor="#e5e5e5" border="0" cellpadding="5" cellspacing="0" width="100%">
<tbody><tr bgcolor="#ffffff">
<td rowspan="3" height="40" nowrap="nowrap" valign="top">
<img src="login_files/error.gif" name="error" height="20" width="20">
</td>
<td rowspan="3" align="center">
<p>
<font color="#ff0000" size="-1">
<b>
<div id="TryAgain" style="display: none;">Login Failed! Invalid UserID and/or Password, Please try again.<br></div>
<div id="AccountLocked" style="display: none;">Your Account has been Locked!</div>
</b>
</font>
</p>
<p>
<font color="#ff0000">
<b>For
assistance call E-Services Help Line at (XXX) XXX-XXXX Monday through
Friday between the hours of 8:00 am and 5:00 pm eastern standard time.</b>
</font>
</p>
</td>
</tr>
<tr bgcolor="#ffffff">
</tr><tr bgcolor="#e5e5e5">
</tr></tbody></table>
</td>
</tr>
</tbody></table>
</div>
<br>
</div>
<table border="0" cellpadding="0" cellspacing="0" width="500">
<tbody><tr>
<td background="login_files/border_upper_left.gif" height="20" nowrap="nowrap" width="20"> </td>
<td background="login_files/border_top.gif" height="20" nowrap="nowrap"> </td>
<td background="login_files/border_upper_right.gif" height="20" nowrap="nowrap" width="20"> </td>
</tr>
<tr>
<td background="login_files/border_left.gif" nowrap="nowrap" width="20"> </td>
<td>
<table bgcolor="#ebebce" border="0" cellpadding="2" cellspacing="0" height="100%" width="100%">
<tbody><tr>
<td colspan="3" align="center">
<font color="darkred" face="Arial" size="3">
<b>
</b></font>
<b> </b></td>
</tr>
<tr valign="bottom">
<td colspan="3" width="100%">
<table bgcolor="#ebebce" border="0" cellpadding="5" cellspacing="0" width="100%">
<tbody><tr bgcolor="#e5e5e5">
<td rowspan="2" bgcolor="#ebebce" height="20" nowrap="nowrap" valign="top" width="4%">
<font color="#000000">
<span class="text">
<img src="login_files/arrow.gif" align="top" height="20" width="20">
</span>
</font>
<font color="#000000"> </font>
</td>
<td rowspan="2" bgcolor="#ebebce" width="96%">
<font color="#000000" size="-1">
<span class="text">Please enter your Email and Password. If you are a new user to AARP, please select First Time AARP User.
</span>
</font>
</td>
</tr>
<tr bgcolor="#e5e5e5">
</tr></tbody></table>
</td>
</tr>
<tr valign="bottom">
<td colspan="3">
<table align="center" border="0" width="349">
<tbody><tr>
<td nowrap="nowrap" width="74">
<font color="#000000" size="-1">
<div align="left">eMail:</div>
</font>
</td>
<td width="265">
<input name="userid" value="" size="32" maxlength="32" tabindex="2" type="text">
</td>
</tr>
<tr>
<td>
<font color="#000000" size="-1">
<div align="left">Password:</div>
</font>
</td>
<td>
<p>
<font color="#000000" size="-1">
<input name="password" size="32" maxlength="32" length="30" tabindex="3" type="password">
</font>
</p>
</td>
</tr>
</tbody></table>
</td>
</tr>
<tr>
<td>
<font color="#000000" size="-1">
<p align="center"><b>Forgot Your Password?</b></p>
</font>
</td></tr>
<tr>
<td align="center"> <font color="#000000" size="-1">
Email New Password
</font>
</td></tr>
<tr>
<td colspan="4">
<div class="boldText" align="center">
<br>
<input src="login_files/button_login.gif" name="Submit" value="" alt="login" type="image">
 <b class="boldText"><img src="login_files/button_clear.gif" name="img_clear" alt="clear" border="0" height="25" width="68"></b>
<b class="boldText"><img src="login_files/button_help.gif" name="img_help" alt="help" border="0" height="25" width="68"></b>
<b class="boldText"><img src="login_files/button_cancel.gif" name="img_cancel" alt="cancel" border="0" height="25" width="68"></b>
</div>
</td>
</tr>
</tbody></table>
</td>
<td background="login_files/border_right.gif" nowrap="nowrap" width="20"> </td>
</tr>
<tr>
<td background="login_files/border_lower_left.gif" height="20" nowrap="nowrap" width="20"> </td>
<td background="login_files/border_bottom.gif" height="20" nowrap="nowrap"> </td>
<td background="login_files/border_lower_right.gif" height="20" nowrap="nowrap" width="20"> </td>
</tr>
</tbody></table>
<p></p>
<span class="text"><br><br><b>NOTICE:
This system is the property of AARP and is for authorized use only.
Unauthorized access is a violation of federal and state law. All
software, data transactions, and electronic communications are subject
to monitoring.</b></span>
<div id="hr" style="position: absolute; width: 100%; height: 10px; z-index: 90; top: 657px; left: 10px;">
<hr>
</div>
<div id="footer" style="position: absolute; width: 700px; height: 55px; z-index: 115; top: 678px; left: 50px;">
<span class="subhead">
Privacy Policy
Disclaimer
Contact Us
</span>
<span class="bodytext">
</span></div>
<form name="passform" action="http://oradev2.na.aarp.int/wampassword/passwordReset.html" method="post">
<input name="login" value="" type="hidden">
<input name="backUrl" value="http://oradev2.na.aarp.int/login/login.html" type="hidden">
</form>
<script type="text/javascript" language="JavaScript" xml:space="preserve">
var undefined;
if (
document.login
&& document.login.password
function clearForm()
document.login.reset();
function navigate( linkName )
if ( 'login' == linkName )
if ( document.accountLogin.userID.value != '' && document.login.password.value != '' )
alert('Please click the Account Registration Setup link for now');
//document.location = 'userDataPersonal.htm';
else
alert('Please enter a UserId and Password');
function openHelp()
helpDoc = window.open( "http://www.aarp.org", "", "scrollbars=yes,resizable=yes,width=500,height=300" );
function cancel()
// open dialog
var initX = parseInt( window.screenX ) + parseInt( window.outerWidth ) / 2 - 100;
var initY = parseInt( window.screenY ) + parseInt( window.outerHeight ) / 2 - 50;
cancelDialog = window.open( "./cancelDialog.html", " cancelDialog", "resizable=yes,toolbar=no,menubar=no,width=200,height=150,screenX=" + initX +",screenY=" + initY );
</script>
</div></form></body>
<script type="text/javascript">
</script></html>

Is it not possible that someone fired the password expiration cmd ?
SQL> select limit
2 from   dba_profiles
3 where profile='DEFAULT'
4 and resource_name='PASSWORD_LIFE_TIME';
LIMIT
UNLIMITED
SQL> select profile from dba_users where username='MYUSER';
PROFILE
DEFAULT
SQL> conn myuser/myuser
Connected.
SQL> conn / as sysdba
Connected.
SQL> alter user myuser password expire;
User altered.
SQL> conn myuser/myuser
ERROR:
ORA-28001: the password has expired
Changing password for myuser
New password:
Password unchanged
Warning: You are no longer connected to ORACLE.
SQL> conn / as sysdba
Connected.
SQL> select name, astatus, TO_CHAR(ctime,'DD-MM-YYYY HH:MI') CTIME, TO_CHAR(ptime,'DD-MM-YYYY HH:MI') PTIME, TO_CHAR(EXPTIME,'DD-MM-YYYY HH:MI') EXPIRE
2 from sys.user$ where name ='MYUSER';
NAME
   ASTATUS CTIME
PTIME
EXPIRE
MYUSER
         1 23-11-2011 11:15
23-11-2011 11:15
23-11-2011 11:17
SQL>Nicolas.

Need to install single app for multiple ids without user intervention to do a first time sign in. Can we encrypt the login information in the install

In old Volume license days, we just script the install with a single license key for CLP licensing. Now it requires a different package for every single install with a different login id. What if you have to do 10 or 100 with multiple ids

Moving this discussion to the Enterprise Deployment for Creative Cloud, Creative Suite forum.

Problem removing login banner

Hi All,
For security purposes, I am trying to prevent a Solaris 2.5.1 system from displaying any hardware or software information when a telnet session is initiated. To achieve this, I have removed the /etc/motd file, modified the /etc/default/telnetd file to include the line BANNER="", and created a /etc/issue file. When a user telnets to a Solaris 2.6 system configured this way, they see only the disclaimer contained in the /etc/issue file and then the login prompt. When I configure a Solaris 2.5.1 system in this manner, however, the following line is displayed before the /etc/issue:
UNIX(r) System V Release 4.0 (servername)
Anyone know what generates this line and how I can get rid of it?
Thanks,
John Frizzell

Hi John,<br><br>
Unfortunately in Solaris 2.5.1 and earlier, this banner message<br>
is hardcoded in the in.telnetd daemon. It's only with Solaris 2.6<br>
that the configuration variable BANNER has been introduced, <br>
precisely to allow system administrators to remove any mention<br>
of the type and version of the OS.<br>
<br>
<br>
So, there is no official solution to your problem on 2.5.1<br>
but there are ways around it:<br>
<br>
- Binary edit the file /usr/sbin/in.telnetd and put some \0<br>
characters instead of the beginning of the string<br>
- Or get a public domain in.telnetd daemon and compile it yourself<br>
<br>
Of course, none of these options would be supported :-).<br><br>
Caryl<br>
<br>
Sun DTS<br>

After the latest updat to Mavericks 10.9.3, my imac continues to loop back to the login screen...Suggestions??? THANK YOU VERY MUCH!

After the latest updat to Mavericks 10.9.3, my imac continues to loop back to the login screen...Suggestions??? THANK YOU VERY MUCH!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Capacity:|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2[01].+/,"",$3);b=b"\n"$2" "$3" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status "-F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL'" '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ test "$v"&&echo "$_";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Is it possible to SORT the Login Items on

Is it possible to SORT the Login Items on
Apple - System Preferences - System - Accounts - Login Items?
Useful to load one of them before or after the others.
Thanks?

I don't think you can sort them like that but you can achieve this by using apple script.
for example if you want to launch Mail first and Safari second, paste the following into script editor and save it as an application.
tell application "Mail" to launch
tell application Safari to launch
You can also put a delay between the two:
tell application "Mail" to launch
delay 3
tell application Safari to launch
this will put a delay of 3 seconds between launches. Now remove Safari and Mail from login items and put the app you made using apple script there instead.

How to suppress the 'login screen'

Am looking to find some code to suppress the login screen?
Could use some code suggestions?
Thanks...

Don't need any code. Just make your first page visible to public users. Test it by pulling it up in the browser directly eg. host.domain.com/pls/portal30.home. does it work? if so change your index.htm file under apache to go directly to that page. eg:
<HTML>
<SCRIPT LANGUAGE-JavaScript>
document.location="http://myserver.com/pls/portal30.home" </SCRIPT>
</HTML>
Remember anything not public won't show up. Also check the exact URL resolution when testing it. You will need the fully qualified name. If you get all this trying redirecting in Apache to shorten the name.
Chase

After login close the login window and open home page in new window

Hi guys,
I want to go to a new window for the "home page" without browser back button etc. after login validation.
And also close the login window at the same time.
Here is the code I used after the login validation.
ExtendedRenderKitService erks =Service.getRenderKitService(FacesContext.getCurrentInstance(),ExtendedRenderKitService.class);
StringBuilder script = new StringBuilder();
script.append(" params = 'width='+screen.availWidth-10;\n" +
" params += ', height='+screen.availHeight-50;\n" +
" params += ', top=0, left=0'\n" +
" params += ', fullscreen=yes';\n" +
" params += ', scrollbars=1';\n" +
" params += ', resizable=1';\n" +
" params += ', status=1';\n" +
"window.close();\n" +
" newwin=window.open('home.jspx','xxxxxxxxx', params);\n" +
" if (window.focus) {newwin.focus()}");
erks.addScript(FacesContext.getCurrentInstance(), script.toString());
This successfully opens a new window. I want to close the current login window at the same time.
Please help me with this.
Regards !
Sameera

on the 'Submit' onclick event add some JavaScript code:
this.form.target = '_blank';

Where do I apply this CSS file in the login page to get the required output

Hi,
I am an apex beginner. I got this html text from a 'Google Blank Search' for beautifying the login page. I have no idea where to copy and paste this CSS file in the 'login' edit page. If I open 'Edit Page template option, I can see page 'Definition' , 'Header' and 'Footer' and so many codes. In which part of these areas I Should copy this script to get the output.
Thanks in advance...
Please find the script below.
html, body {
     font:normal 12px verdana;
     padding:0;
     border:0 none;
     overflow:hidden;
     height:100%;
     body {
     padding: 0px;
     background-image:url(&LOGIN_BACKGROUND_IMAGE.);
     background-repeat:repeat;
     background-position:center;
     background-attachment: fixed;
     text-align:center;
     margin:0 auto;
     vertical-align:middle;
     #Messages {
     width:345px;
     margin-left:-180px;
     position:absolute;
     top:50%;
     left:50%;
     margin-top:-35px;
     #BoxBody {
     width:345px;
     margin-left:-170px;
     position:absolute;
     top:50%;
     left:50%;
     margin-top:30px;
Edited by: user13561710 on Jan 9, 2011 5:32 PM
Edited by: user13561710 on Jan 9, 2011 5:33 PM
Edited by: user13561710 on Jan 9, 2011 5:37 PM

Hi,
Edit the page and add the styles into the HTML Header setting. Also ensure that the styles are enclosed within STYLE tags:
<style type="text/css">
html, body {
margin-top:30px;
</style>Andy

Scripting the Login Banner

Similar Messages

Maybe you are looking for