ScrollPane vertical scroll bar positioning

I have a ScrollPane that holds a number of number of sprites. The sprites are like rows and I would like them to fill the width of the ScrollPane.
My problem is that if there are not enough sprites to fill the vertical space of the ScrollPane, then no Scrollbar appears and there is a narrow gap left on the right side of the ScrollPane. If I make the sprites wider, when the vertical scroll bar does appear some of the sprite is cut off and the horizontal scroll bar appears (I never want the horizontal one to appear).
Is there a way to move the scrollBars? or perhaps another way to solve my issue?

assign your sp's horizontalScrollPolicy (and/or verticalScrollPolicy) to "off".

Similar Messages

List vertical scroll bar position change issue

Hi all,
List selection makes the list jump (scroll) up moving the selected entry to top any idea on this issue.
regards,
karthik

Try it in a simple test case. I don't think that is default behavior.

In the viewer going to vertical scrolling bar I get a jump to original position...

Scenario:
In the viewer I'm working with the mouse vertical scrolling for searching some scenes, then I go to vertical the scrolling bar of the window to scroll in bigger steps... well, the viewer jumps to the previous position.. so I have to start my searching again.... and every time I go the vertical scrolling bar I get this jump to the original position... Very annoying....

Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Focus vertical scroll bar in report div

Hi everyone,
I just want to know if the issue has been resolved by someone :
I have a report within a div and a vertical scrolling bar to scroll the rows. When I click on a row of the report the row is highlighted. Now, if the clicked row is at the end of the report, the scrolling bar goes up, and the user has to scroll down to see the selected row. So how to focus this scrolling bar once the user clicks on the row ?
I guess I have to compute the id of the selected row times the row height and send this value to the css parameter of the scroll bar (but AFAIK there's no such parameter in css for positioning a scroll bar) ... Someone has came up with a solution ?
Best regards,
Othman.

Thanks a lot Andy,
I didnt' know about the scrollTop attribute. So for those how are interested : Each time I click on a row, I store the scrollTop position in a Hidden field. On each body onload, I call a javascript function to position the scroll bar of the div like this :
getElementById.("mydiv").scollTop = html_GetElement('P1_SCROLL_ID').value;
Regards,
Othman

Keep vertical scroll bar still y JScrollPane

Hello all!
I have got a JTable added into a JScrollPane, which scroll bars are always shown.
I have to repaint the JTable each 3 seconds and I would like to keep the vertical scroll bar in its original position, for example if I am watching row 24 of the JTable when the JTable is repainted I would like the vertical scroll bar to be in the same position as it was before repainting because now the vertical scroll bar is repainted always at the top...
With the horizontal bar it works, the bar does not move from its previous state when the JTable is repainted...
Any idea of what is happening?
Thanks in advance :)

This would do for u! ... do it after you have updated the table with the new rows... if you are not using the default table model then you can still get the row count through your JTable object ...
This part moves the scrollbar to the last row coz im doing "myDefaultTableModel.getRowCount()-1", you can keep the current row index in an instance level variable bjust before refreshing the table and use it in this.setRowSelectionInterval() method ...
this.setRowSelectionInterval(myDefaultTableModel.getRowCount()-1, myDefaultTableModel.getRowCount()-1);
this.setColumnSelectionInterval(1, 1); //didnt need any specific column coz I wanted the row basically..
this.scrollRectToVisible(this.getCellRect(this.getSelectedRow(), 1, true));This basically selects the given row and then moved the scrollbar over to that point as well ...
OR, here's another alternative!! you can also get the current scrollbar value similarly jsut before refreshing and pass that on to this method ...
this.jScrollPane1.getVerticalScrollBar().setValue(jScrollPane1.getVerticalScrollBar().getValue());Hope it helps...
Cheers!
Asim

No vertical scroll bar using Safari or Firfox

I created my own website using Dreamweaver CS3 and it looks great using IE. I just viewed it in Safari and Firefox and noticed there is no vertical scroll bar on the right so people can not see the bottom half of my pages. I have researched this online and nothing seems to be working. Any ideas will help. My website is www.binglevet.com if that helps anyone view the source code. Thank you. Caroline

You are awesome! I actually did run that report and there was this message; however, I didn't realize it was the main cause for many to be unable to view my site when using Firefox or Safari. I deleted the line and it now scrolls in both browsers. Thank you for the help.
Unsupported value: 'fixed'
body {
font: 100% Verdana, Arial, Helvetica, sans-serif;
background: #2A1F55;
margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
padding: 0;
text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
color: #000000;
position: fixed;

In FF 4.0 why does the down arrow no longer function in the vertical scroll bar?

Prior to FF 4.0 when I positioned my cursor over the down arrow of the vertical scroll bar in Hotmail and depressed the left mouse button, the scroll bar moved downward toward the bottom of it's column limit. Now in 4.0 it turns into an adjustment cursor forcing me to readjust the size of the Hotmail window rather than moving the scroll bar down the column. This only seems to happen in Hotmail.

Check: http://kb.mozillazine.org/Website_colors_are_wrong
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
* You can see all exceptions in Tools > Options > Content: Load Images > Exceptions
* You can check the Tools > Page Info > Media tab for blocked images (scroll through all the images)
There are also extensions (Tools > Add-ons > Extensions) that can block images.

Easy question - scroll bar position in listbox problem

hello again
this time my question is simple...
is there a way to set the initial position of a vertical scroll bar of a listbox?
sometimes - if i make more runnings - remain in memory the last position...and if the new listbox is smaller then the last one i see a white listbox and i think that something went wrong in my program
Using LabVIEW 7.1
Solved!
Go to Solution.

Hi gigi85,
Okay in that case,Please create property node with Multiple lines property, and click on the blue square shown in the diagram and expand it downwards, Labview should automatically add these parameters. added screenshot for your reference.
Let me know if u've any queries.
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13
Attachments:
Screenshot_TopRow_PropertyNode.png ‏8 KB

Vertical Scroll Bars not wanted

I have read other messages, but I cannot figure out why the
vertical scroll bar still appears in IE even though there is no
content below. The bar is there but not useable. Is there some code
that will turn this off when not needed?

That's the way IE (and some other browsers) works. It always
draws a
vertical scrollbar. If the scrollbar is not needed, it is
"ghosted" and
not usable, as you have noticed. When the page's content
exceeds the
window height the ghosted scrollbar rises from the grave and
becomes alive.
Other browsers do not add a scrollbar until one is needed.
Some people
don't like this because the addition of the scrollbar removes
some space
from the window, making it a bit narrower, and page elements
that are in
some way positioned or sized in relation to the window's
width will
shift and/or change size slightly.
IE's solution prevents this content shifting at the expense
of devoting
part of the window to a non-functioning interface element
some of the time.
(It is my belief that either method of handling the vertical
scrollbar
is fine, and skilled designers will not create pages that
fall apart if
a scrollbar should appear where there was none before. For
the record, I
subscribe to the no-scrollbar-at-all-until-one-is-needed
doctrine.)
James M. Shook
http://www.jshook.com

How to put vertical Scroll Bar on the LEFT side of a VBox?

The default is on the RIGHT side. It seems no easy solution on this question.

Hi Darren,
Thanks for your reply. I've narrowed the problem down to this strange behavior only happening when the viewport component is a tree-table (a JTable with a JTree for a column renderer). The tree-table works okay in JDK 1.3, but not in JDK 1.4. When I remove the JTree column renderer, the table draws correctly, but without the tree. It looks like the viewport position is being set wrong somewhere.
When a column is resized, an AdjustmentEvent is created. So that's why resizing the column looked like it had the same effect as the horizontal scroll bar.
If you're interested, then I will be happy to let you know how I fixed it, if I can.
The complete code that creates the scroll pane with the vertical scroll bar on the left is below. There's too much code to post the JTree column renderer.
Thank you,
Don
m_leftScrollPane = new JScrollPane(m_sourceTable,
JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
m_leftScrollPane.setComponentOrientation
(ComponentOrientation.RIGHT_TO_LEFT);

Get image Scroll bar position value

How to get an image component scrollbar position value in flex.
I have an image component in my application, when i scroll the horizontal scrollbar
i need the current scrolled position. How to get the scrolled position in an image component.
Kindly help in this issue.
Rajkumar.

Are you sure you want to use setOnScroll to listen to scroll events rather than set the value of the scroll bar position via the tableView.scrollTo api (which I would recommend) or the scrollBar.setValue() api?
for (Node n: table.lookupAll(".scroll-bar")) {
if (n instanceof ScrollBar) {
    ScrollBar bar = (ScrollBar) n;
    System.out.println(bar.getOrientation() + ": range " + bar.getMin() + " => " + bar.getMax() + ", value " + bar.getValue());
      if (bar.getOrientation().equals(Orientation.VERTICAL)) {
      bar.setValue(0.5);
}If you did really, really want to use setOnScroll, then you could do something like this:
Node flow = table.lookup("VirtualFlow");
if (flow != null) {
final EventHandler<? super ScrollEvent> originalScrollHandler = flow.getOnScroll();
flow.setOnScroll(new EventHandler<ScrollEvent>() {
    @Override public void handle(ScrollEvent event) {
      System.out.println(event);
      originalScrollHandler.handle(event);
} Though you would be better off just using an eventfilter rather than using the strange lookup and setOnScroll chaining method in the above code.
table.addEventFilter(ScrollEvent.ANY, new EventHandler<ScrollEvent>() {
@Override public void handle(ScrollEvent event) {
    System.out.println(event);
    // uncomment if you don't want the default table scroll events processing to take effect.
    //event.consume();
});

At times when dragging the vertical scroll bar my computer screen oscillates up and down for some time before going blank or not responding to any clicks requiring a forced system restart. What is wrong?

Hi,
Suddenly while working with Firefox if I happen to drag the vertical scroll bar, a very abnormal behavior occurs. My screen dances up and down for a short time before either going black or getting restored but with no clicks working. The only way to resume is to force a restart of the system.
Any help would be deeply appreciated.
Thanks and Regards
Deepak

That didn't work. On trying to install a new driver I got the error the graphics driver could not find compatible graphics hardware. Is there anything else that can be done to at least prevent the hanging of the computer even if it means less features from Firefox being available?

Question on vertical scroll bars in JScroll Pane

Hi,
I managed to display my chat program with a vertical scroll bars by using JScrollPane. Every time some on types a line, this is appended to whatever was previously in the JTextArea (the JScrollPane has a JTextArea in it). Even though this works fine, when the dimension of the JTextArea is full with text, one has to scroll down to see what was the last line of text that was typed.
Is there a way to make the verticall scroll area alwas scrolled down (I mean, scrolled to the bottom so I can see new incoming text without manually having to scroll it down?)
Thanks!
Cecilia.

You might try adding a properties listener to the JTextArea listening for a "resize/size" property change and when it does, force the scroll bar to go to max.

Vertical Scroll bars in analysis - View all rows

Users want to see the whole report displayed in one page with only a vertical scroll bar. They do not want the up/down arrows. Is this possible in OBIEE?
Thanks.
Ad

To implement the solution, please do:
1. Change instanceconfig.xml file in <biee11g_install>\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1 as following
<Views>
<Pivot>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>

<DisableAutoPreview>false</DisableAutoPreview>
<MaxVisibleColumns>5000</MaxVisibleColumns>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Pivot>
<Table>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Table>
</Views>
3. Note the new elements added are the following to both <Pivot> and <Table>, the Pivot part controls Pivot view, and Table part controls Table View, my testing was done with Table View.
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
4. Restart Presentation Server from EM, then run your request, do excel export to verify.
Thanks...

On every website, my right vertical scroll bar is missing and all of my Toolbar bookmarks unless I minimize the window, click "view" and "full page." How do i get it back to NORMAL?

When I hit "full page" the right vertical scroll bar re-appears, but my bookmark toolbars, my bing bar, and pretty much the entire top 2 inches of my screen disappears. When all of these things are showing, the right vertical scroll bar disappears, and the entire webpage shifts to the right, so I can't see most of the right side of the page. How do I fix this?

Welcome to Safari 6 with:
. . t . . a . . b . . s . .
That are the size of tractor-trailer trucks!
There is no known way to get them smaller except when you get a lot they will "shrink-to-fit".

ScrollPane vertical scroll bar positioning

Similar Messages

Maybe you are looking for