SD basic help

Hi All,
I am a junior ABAP(SD)consultant. Please let me know where to start from and please provide some helpful material for working on SD ABAP!!
Thanks in advance.

Hi,
   Refer to the link below.
   http://sap-img.com
   Under this link in ABAP workbench you will find some useful information.
   Also look at smart forms ,they would be used a lot while working on SD.
   Do take care of SD table also.
   Reward points if it helps.
Regards
Karan

Similar Messages

Darwin Streaming Server (really basic help)

Hey, I need some basic DSS help. REALLY basic help. So, Darwin is installed and everything, and I can upload movies to the /usr/local/movies directory. When I upload them there, I can see them in the 'make new playlist' screen. However, Darwin seems to be requesting a .sdp file as the 'mount point'?? What's with that?
Thanks for any assistance.

The mount point is supposed to be the location on the hard disk where the movie file resides; the sdp extension indicates that the file is a stream. To create a SDP file, try using the information linked to from this page.
(14906)

Jasper basic help

hello all,
I need some basic help and info on jasper. if some one has used it and used it specially with swing, please let me know.
I need some basic concepts of jasper.
1: can I send the reports to the printer directly? i mean, is there a class in jasper to access printer.
2: can I send queries directly to a report?
3: if there is facility to send the report to printer, then can I preview the report page wise before sending it to the printer?
Please provide some prompt info as I am in a big trouble with a project and I don't have a lot of time to go through all the docs, just to find that there is no direct printing support. if there is printing support in jasper then I will spend the time on the docs.
thanks in advance
Krishnakant.

1: can I send the reports to the printer directly? i mean, is there a class in jasper to access printer.
yes
2: can I send queries directly to a report?
you query the database, create the report using the query and then print it.
3: if there is facility to send the report to printer, then can I preview the report page wise before sending it to the printer?
yes you can display the report on the screen
Basically you can display a report on the screen or print it directly.
If the report is displayed on the screen you then can print or export it.
These may help
http://www.javaworld.com/javaworld/jw-09-2002/jw-0920-opensourceprofile.html
http://jasperreports.sourceforge.net/quick.how.to.html
http://jasperreports.sourceforge.net/samples/index.html
http://saloon.javaranch.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&f=64&t=000465
http://sourceforge.net/forum/forum.php?forum_id=113530
Here is an example pulled from my code that displays a report on the screen.
It is not going to be much help.
Note the references to JDesktopPane and modalFrame will be confusing.
The report is loaded from a jar.
I go to a lot of trouble to trap the report on a modal screen.
processStandardReport("sreports/employees.jasper", null);
public static boolean processStandardReport(String reportFile, HashMap controlHash) {
   JasperPrint report = null;
   URL fileURL = null;
   String rFile = reportFile;
   HashMap rptHash = controlHash;
   // get report reference
   try{fileURL = startup.class.getResource(reportFile);}
   catch (Exception jEX) {
      // Unexpected error
      return false;
   Connection reportConnection = ???? // H E R E   establish your connection
   try{
      // set file stream
      fs = (InputStream)(startup.class.getResourceAsStream(rFile));}
      // load the report
      JasperReport template = JasperManager.loadReport(fs);
      // fill the report
      report = JasperManager.fillReport(template, rptHash, reportConnection);
   catch (Exception jEX) {
      // Unable to process report
      // RELEASE OR CLOSE YOUR CONNECTION
      return false;
   // RELEASE OR CLOSE YOUR CONNECTION
   try {
      // set uo to display the report
      int iPtr = rFile.lastIndexOf(".");
      String title = "View Report "+rFile.substring(0,iPtr);
      JDesktopPane desktopRef = getDesktopReference();
      JRootPane rootRef = desktopRef.getRootPane();
      JInternalFrame modalFrame = new ModalInternalFrame(title, rootRef , desktopRef){
         public void dispose() {
         ModalInternalFrame.killModalFrame();
         ReportUp = false;
   ReportUp = true;
   // display the report in modal panel
   // note this is a subclass of JPanel
   JRViewer jrv = new JRViewer(report);
   jrv.setPreferredSize(new Dimension(600, 410));
   JScrollPane reportScroll = new JScrollPane(jrv);
   JPanel viewer = new JPanel();
   viewer.add(reportScroll);
   modalFrame.setFrameIcon(frameIcon);
   modalFrame.setClosable(true);
   modalFrame.setSize(new Dimension(625, 450));
   modalFrame.setPreferredSize(new Dimension(625, 450));
   modalFrame.setMinimumSize(new Dimension(625, 450));
   modalFrame.setLocation(50, 50);
   modalFrame.getContentPane().add(viewer);
   modalFrame.pack();
   modalFrame.setVisible(true);
   catch(Exception vEX){
      // unable to view report
      return false;
   return true;
}rykk

Basic help with photo slideshow?

Hi
I am new to adobe after effects and I have recently purchased a file from videohive (http://videohive.net/item/photo-album-v2/44575) which is great. I am trying to tweak it a little and as I am new to after effects, I would love to ask anyone for some basic help? I will be leaving the country in 2 weeks to get married and my UK wedding reception will be a week after I return so I am in pretty much a hurry to get a slideshow rendered and put onto dvd to play in the reception. I have mastered how to render in PAL format and get onto DVD but I am having a little trouble with basic elements such as adding keyframes.
The file has 13 placeholders which I have replaced with my own photos. Two of which are replaced with avi videos instead of jpg. This works fine but I would like to stop the camera movement on say photo 7 and zoom in a little on the video, play the video (approx 40 seconds) then return the photo back in place and resume your camera movement. This will be repeated for one other photo (photo 9) where the video is approx 60 seconds. Could you possibly help me how I can do this? I am also adding music to play throughout from start to finish and I would also like to pause (or fade volume) whilst the avi video placeholder is playing, then resume after playback. I know this may sound a lot to ask but I know that with the knowledge - it will only take me about 30 mins work once I know what to do. Any help you can offer will be fantastic. I am proficient with Adobe Flash so I understand the jargon of timelines etc.
Thank you for any help anyone could provide in my panic to get complete.
Best regards
Sean.

*woohoo* Here's to the ones daring marriage... For your problems there is a number of ways to tackle them, but the specific solution may depend on how the template works. As David already said, for audio you'd be better off using Premiere, but assuming you have just a single track that realyl only requires fades, AE should serve your needs. You can reveal the audio volume by tapping the L key when the respective layer in your composition is selected, then enable the stopwatch icon to add keyframes. Layers can be trimmed by simply dragging their ends, duplicated with Ctrl+D and split by using Ctrl+Shift+D, so it should be perfectly possible to extend your audio as needed, assuming you increase the comp duration first via the composition options. For the images to come into view, you could simply scale them up. Of course the project is based on 3D layers, so it would look a lot better if you animated the camera to dolly in, but if you have no experience in AE, that may make more of a mess than it's worth. Therefore I simply recommend you create a photo flash/ film burn transition - add a white solid with a slight color tint, set it's blending mode to add, animate it's opacity and while it's fading out, fade in your full screen video. If done in 32bpc, this can look quite real and since it's a separate effect, it won't interfere with the rest of the animation.
Mylenium

Need basic Help - SG300 with vlan and routing

Hi,
i need some basic help with configuring vlan/routing.
Situation:
DSL Router - Cisco 300 - XenServer
192.168.1.253 - 192.168.1.19 - 192.168.1.10 (mgmt ip)
goal is, to reach from inside xenserver vms the internet.
vms = 192.168.2.x
gateway ip = 192.168.2.1
what i did:
- configured vlan 102, tagged, with the xenserver port
- configured on xenserver a network with vlan id 102, attached to the vm
- this network is conntected to an external bond
- configured ipva4 interface: vlan102 - Static - IP 192.168.2.1 (this is the gateway ip of the vms)
- automatic configured IPv4 Route: 192.168.2.0/24 next hop 0.0.0.0, Directly connected
So at the moment i cant ping from inside a vm to the DSL Router (192.168.2.2 to 192.168.1.253)
any ideas what i misconfigured or whats wrong?
cheers,
-Marco

Hi Tom,
ok, that make sense. I can ping the router now inside vms from 192.168.2.x network.
But i cant ping external adresses, error: Destination net unreachable.
My other problem i have, i cant reach any server from outside over router portforwarding.
How do i have to configure the upload port to the dsl router? Is it a access port or a trunk
port with all vlans (tagged or untagged?) At the moment ive a tagged Trunkport with all vlans.
IPv4 Interface Table
Interface
IP Address Type
IP Address
Mask
Status
VLAN 1
Static
192.168.1.19
255.255.255.0
Valid
Should the VLAN1 ip adress not the router ip adress ? Do i need an additional vlan for
the router ? At the end i like to change the switch ip from dhcp to static (change automaticly
when switching to layer 3 mode), but ive to look for the ios commands first.
What else do i missing ?
Thanks a lot,
Marcus

I need basic help with my VISTA laptop. Adobe Reader X (10.1.4) IS INSTALLED BUT NOT WORKING.

A basic questions. My laptop VISTA has Reader X (10.1.4) installed. Internet add ons has Adobe PDF llink helper enabled. I am not able to open PDF files?

Moved to Adobe Reader.
You cannot able to open pdf files on your computer or you cannot open pdf files in your webbrowser? If you cannot open pdfs in your browser, what browser are you using?

Flash CS5 Basic Help!

I am very new to this program and am struggling to get past this one simple little thing!
I clicked New > Action Script 3.0
and am trying to do some of the basic tutorials and cant even get past the first one!
I am trying to draw a filled in rectangle.... but even when i change the timeline button to fill instead of outline, it only ever draws the outline.
Am i doing something wrong?
Also i changed the background colour of the stage and it doesnt seem to change either....
Please help me get past this first step in learning Flash!!
I have been trying to follow the tutorials but everytime i try to draw a filled in shape on the stage, it always just comes out as an outline. I have deselected the outline square so it is filled in... in the timeline an still i can only get an outline. I dont get it!!
If you can see where im going wrong please let me know...
Thanks

I noticed what you said and what the image showed, but that's the best I could offer. It doesn't look like you're doing anything wrong... the software appears to be having an issue. Have you installed the latest update for CS5 (http://www.adobe.com/support/flash/downloads.html)?

Complete Novice Needs Some Basic Help

Hi!
I'm sorry to clutter up the discussion with such basic questions, but what I want to do is get something from a cassette tape to my iPod. I'm told I can do this through GarageBand, and I have an audio cable that the guy in the Apple store said I would need. I'm not even sure where to plug this cable in. So any help in where I plug this in, or what I do next would be tremendously appreciated. If someone could even tell me where to look for help that would be great (when I look in GarageBand help its saying something about MIDIs and I don't even know what that is). Eternal gratitude for any help....

Oh man, this is frustrating and I might give up soon!
So in System Preferences, Sound I have 2 things,
Internal Microphone (port is Built-in) and Line In
(port is Audio line-in port). I can't seem to
select one or the other, they're just there.
Yeah, there is no "apply" or "OK" or anything like that. Just click on the Line-In so that it is highlighted and close the system preferences. That takes care of that. My PB G4 automatically detects when I plug in my line-in now that it is set up.
Then in GB preferences, I only have the option of
Built-in Audio, there is no other option.
Built-In audio is correct in GB prefs.
I also couldn't find where you were saying to
double-click...what's the track header? I've clicked
everything and can't find a monitor drop down menu
option.
The track header is the left-hand side of the track where there is a small speaker or instrument. For what you are doing, you need to create a new basic track. (Under "Track" in the menu bar, click "New Basic Track") You should have a new blue track that is labeled "No Effects." Double click on the speaker image and a dialog box will appear. Right in the middle of this box there are options for Input, Volume, and Monitor. You can turn on and off monitor abilities here.
On the plus side, the connector I have seems to
work...its male/male 1/8".
Perfect.
Thanks again and if you want to bail out, I
completely understand!
Hang in there. We were once all newbies to this digital recording stuff too.

Basic help needed very much

Hi,
I have an Epson 3800 printer and Adobe Elements 7 (Epson advised me that I should buy some version of Photoshop to take full advantage of the printers capabilities).....Problem is need basic info on how to set all the buttons to make a decent print. There are many,many choices on various drop down tabs all through the process of making a print. Also, It seems that all my pictures are 72 ppi ...is this a default setting ? Or, did I do something wrong when I downloaded them from my camera ? PLEASE help ! If at all possible someone could guide me through the process step by step I would be very, very grateful. I need guidance from the download, through the myriad of buttons (ie: color management, size selections (why do I have to tell both Elements and the printer the size of my paper?!!$#@) what's up with 72ppi on all my pics, if i change to 300 ppi wont pics get worse ? )
I called Epson and asked them to walk me through a print but they wouldnt because they said I'm going through Elements first and that is not their responsibility! BUT THEY ADVISED ME TO GET ELEMENTS IN THE FIRST PLACE !!!
Please help...I am an artist (painter) ...my website is www.theeastcoastartist.com I will send a free 8 X 10 signed print of a painting to anyone that can help me get a decent print or just tell me which settings to make each step of the way.
Thanks,
Frank

Frank, here's a couple links to tutorials that may help. They use Photoshop but the print settings in Elements are similar enough.
http://www.wonderhowto.com/how-to/video/how-to-print-from-photoshop-to-the-epson-stylus-pr o-3800-260408/
http://people.csail.mit.edu/ericchan/dp/Epson3800/printworkflow.html
As far as the resolution, stated in pixels per inch (ppi), the images from your camera have a fixed number of pixels, so resolution is determined by the size of the print...the larger the print, the larger the pixels, the lower the resolution. 300 ppi is considered optimum for printing...higher won't hurt, lower than 250 ppi may start to be noticable.

Basic Help on Servlets

Hi,
I have installed JDK1.4.0_01 and Tomcat 4.1.
In my basic Servlet Example, I have created the following directory structure --
TOMCAT_HOME\webapps\testing\index.html
TOMCAT_HOME\webapps\testing\src\TestServlet.java
TOMCAT_HOME\webapps\testing\WEB-INF\web.xml
TOMCAT_HOME\webapps\testing\WEB-INF\classes\TestServlet.class
The HTML Takes some input from a Text box and on Submit, calls the Servlet.
The problem I am facing is that, everytime the Submit is invoked, it gives HTTP 404 Servlet Not found Error.
My entries in server.xml ---
<Context path="/testing" docBase="testing" debug="0" reloadable="true">
     <Logger className="org.apache.catalina.logger.FileLogger"
          prefix="localhost_testing_log." suffix=".txt"
          timestamp="true"/>
</Context>
My entries in web.xml ---
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
<servlet-name>TestServlet</servlet-name>
<servlet-class>TestServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>TestServlet</servlet-name>
     <url-pattern>/testing</url-pattern>
</servlet-mapping>
</web-app>
In the POST tage in the index.html, I am calling ---
<form action="TestServlet" method="POST">
</form>
http://localhost:8080/testing displays index.html appropriately.
But, on SUBMIT, HTTP 404 Error is displayed.
Expecting Help!
Thanks in Advance

According to your servlet mapping , the url to run your servlet is :
http://localhost:8080/testing/testing !!! because of <url-pattern>/testing</url-pattern>
so change it to :
<url-pattern>/TestServlet</url-pattern>

How do I get general back to basics help?

Had an I Pad and I Touch and didn't use a lot. Now I have another I Pad and I Phone...I really need to understand it all. The Apple Store is far from me and I do'nt have time to go to mulitple sessions. I just want to pay an expert to sit down and show me everything for an hour or two. Any ideas?

Hey Westmad,
Thanks for the question. Our support website has a great deal of information. To get you started, you might want to check out these resources:
Learn more about iOS 7 and iPhone - Apple Support
http://support.apple.com/basics/iphone
iPhone User Guide
http://help.apple.com/iphone/7/
iPad User Guide
http://help.apple.com/ipad/7/
Apple - Support - Videos
http://support.apple.com/videos/
Thanks,
Matt M.

PCI-DIO-96 & Visual Basic: Help

I am trying to control 96 relays with the PCI-DIO-96 and Visual basic but I
can figure out how to write to a PCI address from visual basic.
Thanks for your help
Raul
[email protected]
[email protected]

Install and Use Ni-DAQ. It will give you functions that you can use.
"Raul Quinones" wrote in message
news:[email protected]..
> I am trying to control 96 relays with the PCI-DIO-96 and Visual basic but
I
> can figure out how to write to a PCI address from visual basic.
>
>
> Thanks for your help
> Raul
> [email protected]
> [email protected]
>
>

GUI Basic help

Hi, I need help doing the following:
I need to open a GUI using swing, and in it I want a button on top, and a text screen that is around 6 inches by 6 inches.. basically what i want to do is that every time i press the button the text area refreshes and displays new text..basically it runs the method and displays the output in the text area....are there any code snippets available for this? or can I get a bit of help on how to do this please?
Thank you.

These tutorials have example code:
[http://java.sun.com/docs/books/tutorial/ui/index.html]
[http://java.sun.com/docs/books/tutorial/uiswing/index.html]

RV120W VPN Setup - basic help needed

Hi all,
I've recently bought a RV 120W Wireless-N VPN Firewall hoping it would ease me in creating VPN and remote connectivity. But I seems to be struggling with this.
Here is my situation.
When I bought my Cisco router I didn't know it had an ethernet port for WAN. I thought it would have a RJ11 compliant port. So now I am having to put the router behind my modem.
I gave my modem's LAN 192.168.2.1 and to RV120W I gave 192.168.2.2.
All PC's are not connected to internet via RV120W. For RV120W, the local IP network is 192.168.1.0. I've set 192.168.1.1 as the management IP of the Cisco RV120W. All the PC's can get internet from the above layout arrangement.
With frustration, I've portforwared all my ports on the modem (except 1 port) to RV120W i.e to IP 192.168.2.2.
If I enable PPTP on RV120W I can ping its port (1723 i remember) from outside. If I connect to port 80 from outside my network, I can get the managemnt interface of the RV120W.
With the help of the RV120W's userguide I managed to create VPN policy stuff via the 'basic VPN Setup' menu. The guides says to use a wizard but there is no wizard for VPN setup.
With that I have even created users (of every type) but I just can't make the connection.
When I use the QuickVPN to connect... its goes from "Connecting", "Activating Policy" again "Connecting" and then a big error saying a couple of things that might have caused the error.
I want to start from the beginning.
Can somebody please help me.
First... what I am I supposed to put in the fields of the following screenshot. Especially the fields "Remote WAN's IP Address", "Local WAN's IP Address" and "Local LAN IP Address".

Once I knew about the bridge mode thing from this discussion, I started reading the manual of the modem in regard to the brigde mode setup.
According to the manual, the 'Data' bulb on the modem would be off if the modem is in bridge mode. and I've successfully put the modem on bridge mode I guess. It was pretty easy. I just deleted all the WAN setup rules/configs and began with the initial setup wizard which basically had the option to set the modem to bridge mode. After so, the 'Data' bulb got off meaning the modem is now in bridge mode. I am happy about that
But... still not done.
I put one ethernet cable into of the LAN ports of the modem and put the other end in RV120W WAN port. Logged into to RV120W, configured new PPPoE profile (I have the user and pass details) and attached it to the WAN internet setup config.
I went back to the dashboard of RV120W to see if WAN was up. It didn't. I gave some time. It didn't work. It says 'connecting' but never connects.
What am I doing wrong? Am I putting the cable between the modem and router the right way?
...and also, when the modem is in bridge mode will it forward all packets from lan to wan and vice versa or is it like forwarding packets to all ports once recieved.
(I am learning so much with this RV120W )

New to dreamweaver would likew some basic help

ok im rather familliar with both illustreater and photoshop so i feel i know adobe software somewhat --im trying to start a site fer a company im gonna start up ("miese en plac" something i learned in foods bascally everythings ready to go) i have a logo i think i know the domain name im gonna buy i have a ROUGH ideal what i want header and footer def think linnks on left side and on right side i wanna   have a ssemi randomiser fer various images and such i dont yet know the colours or style outherwise that i wanna use i playied in cs3? dreamweaver i think
is the randoms   possable? how would you do that? and is theere like a template that is "easyiest" to worjk with? i thought cs3 had some with like images and designs on it?
any/all help is GREATELY appriated

ok im rather familliar with both illustreater and photoshop so i feel i know adobe software
Illustrator and Photoshop are NOTHING like Dreamweaver. DW was made by Macromedia. Adobe only acquired it a few years ago and has not radically changed how the software works.   DW is an advanced product for web design and development. It is not drag & drop like your graphics apps. It requires you to have some knowledge of code and be able to think more like a web person and less like a design person.
X/HTML and CSS are the 123's and ABC's of web design.
Start learning them here:
HTML & CSS Tutorials - http://w3schools.com/
CSS positioning in 10 steps
http://www.barelyfitz.com/screencast/html-training/css/positioning/
When you have the basics under your belt, s-l-o-w-l-y work through some of the tutorial links below to learn how the software works. Start on a simple project. Gradually increase difficutly level on your next 3 projects. By then you should be ready to build your business site.
Creating your first web site in DW CS4 -
http://www.adobe.com/devnet/dreamweaver/articles/first_cs4_website_pt1.html
Taking a Fireworks (or Photoshop) comp to a CSS based layout in DW
Part 1 --
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt1.html
Part 2 --
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt2.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

I'm a Newb (migrating from Cubase SX 3) need basic help with everything!

Hello, I'm a Cubase SX 3 user trying to learn Logic and switch. I'm having basic trouble setting everything up and getting started. Such as inputs and main output etc. I'm used to the way its all done in Cubase. Does anyone know of a good quick start tutorial that will get me on my way?
Thanks much.
Also, if there are any users familiar with Cubase, perhaps you could explain it to me better.

Hello Cleveland
First i have to say , if you have the original box of logic express , you might have the very handy user manual
If not , there are hundreds of usefull threads in this forum which will help you a lot.
If not , please be a bit more precisse with your question, cause i think no one will explain you all the functions in Logic available here from scratch .
Have a great day and be patient while learning by doing
Daniel
Dual 1.8 G5 Mac OS X (10.4.7) http://www.soniccube.ch

SD basic help

Similar Messages

Maybe you are looking for