SD BW reporting on EDIDC table and RRI to document level - urgent

I need to do some BW sales reporting. To get to those fields, I need to access EDIDC table. But it only gives iDoc info.
How do I get to document level details (RRI) from iDOC nos.
Please help.
Thanks
Mary

could any one give me table name to browse IDoc numbers and corresponding document nos.

Similar Messages

  • How to report on a table which is  in BW Side - Urgent

    Hi,
    We have requirement to create reports on the table tcurr which is present in BW Side.
    Is there any way to report on it.
    Thanks,
    Arvind

    Many ways - you can create ABAP queries (if it is one single table you can actually do with SE16 itself), or if you want to run a bex query, you can create a datasource in this table and create a virtual cube on top of that DS and create Bex queries.
    There might be standard txns (check SPRO--General settings -- Exchange rate ; and other currency related txns ) which may work for you.

  • JEST table and status change document OPL8

    Hi Experts,
    1. I created a prod order and released it and saved. went to AUFK and got the object number to pass in JEST  table. System shows no values found.I was expecting a record for the same. do I need to do something to populate JEST table?
    2. In OPL8 under implementation tab, there is something called status change documents. do I need to configure OCM to use these change documents? if the answer is no, then what is the difference between these change documents and OCM change documents?
    thx in advance

    swathi.rege wrote:
    2. In OPL8 under implementation tab, there is something called status change documents. do I need to configure OCM to use these change documents? if the answer is no, then what is the difference between these change documents and OCM change
    The settings in OPL8 will just determine if system should write the change logs of status to table tables CDHDR and CDPOS (for audit trail). Entries will appear here CO03 >> Header >> Status changes
    I think you opened up different windows of different boxes (DEV, QAS etc) and probably created in production order in DEV and checking status in QAS.
    Edited by: Jeevan Sagar on Feb 12, 2012 10:09 PM

  • Report for MRP controller and relevant purchasing document

    HI
    My requirement :We have MRP controller for different diciplines(mech, electrical, Instrumentation.......ect).
    I want to search for a report Where it display me the Purchasing document(PO) number by respective decipline.
    I tried all the report in MRP controller such as MC.E, MC.D, COOIS.........ect
    Thanks in advance
    Mujeeb

    Hi Mangalraj
    Thanks for your answer, but my question is not yet answered.
    As you told i did follow accordingly.
    When i enter the T.code: ME5A ( i can not find the scope of list ALV but did find the entried as below)
    A     3-line + n special
    B     2-line + n special
    B1     2-line + 2 MRP list
    B2     2-line + 2 stock/rq.
    B3     2-line + 2 purch.dt.
    C     1-line
    C1     1-line + stock/rqts.
    D     
    F     Collective release
    G     3-line loop
    H     2-line loop
    I     1-line loop
    If i select "C" from the list i'm getting 1 line display but as you told i did press the CTRL+F8 but unable to get the cost) it does not work at all like dat.
    I'm using the system version 4.6C. Can you please suggest something on the report.
    Thanks & regards,
    Mujeeb

  • Report on one table and insert to another?

    Ok, this is probably a stupid question, but it's boggling me.
    I have a "view" that I am searching to pull back results on. Then I need to take that ID_NUMBER and pass it to a form that will take those values and insert them into a regular "table" with two unique values [id] = autonumber, and [id_number] = unique id from the view.
    I can get the form to filter the correct results, but it won't allow me to do the DML to process the row (insert)
    any suggestions?

    DISSREGARD PLEASE ... I'VE FIGURED IT OUT.

  • Is there a link between the Journal tables and the Marketing Document tables?

    Hi Everyone,
    Is there a link back from the Journal Tables (e.g.: OJDT and / or JDT1) to the Marketing Documents tables (e.g.: OINV and / or INV1)?
    If there is a link can you please let me know what it is?
    Kind Regards,
    David

    David..
    Try This
    Select T1.RefDate,
    Case
    When T1.TransType=13 Then 'Invoice'
    When T1.TransType=14 Then 'A/R Credit Memo'
    When T1.TransType=15 Then 'Delivery Note'
    When T1.TransType=16 Then 'Delivery Return'
    When T1.TransType=162 Then 'Stock Revaluation'
    When T1.TransType=18 Then 'Purchase Bill'
    When T1.TransType=19 Then 'A/P Credit Memo'
    When T1.TransType=20 Then 'GRPO'
    When T1.TransType=202 Then 'Work Order'
    When T1.TransType=21 Then 'Goods Return'
    When T1.TransType=24 Then 'Incoming Payment'
    When T1.TransType=30 Then 'Journal'
    When T1.TransType=46 Then 'Outgoing Payment'
    When T1.TransType=59 Then 'Goods Receipt'
    When T1.TransType=60 Then 'Goods Issue'
    When T1.TransType=67 Then 'Stock Transfer'
    Else T1.TransType
    End [TransType],
    T1.TransId,
    Case
    -- Sales A/R
    When T1.TransType = 13 Then (Select isnull(Comments, '') From OINV Where DocNum = T1.BaseRef and CardCode = T1.ShortName) -- Invoice
    When T1.TransType = 14 Then (Select isnull(Comments, '') From ORIN Where DocNum = T1.BaseRef and CardCode = T1.ShortName) -- A/R Credit Memo
    When T1.TransType = 15 Then (Select isnull(Comments, '') From ODLN Where DocNum = T1.BaseRef and CardCode = T1.ShortName) -- Delivery
    When T1.TransType = 16 Then (Select isnull(Comments, '') From ORDN Where DocNum = T1.BaseRef and CardCode = T1.ShortName) -- Delivery Return
    -- Purchase A/P
    When T1.TransType = 18 Then (Select isnull(Comments, '') From OPCH Where DocNum = T1.BaseRef and CardCode = T1.ShortName) -- Purchase Bill
    When T1.TransType = 19 Then (Select isnull(Comments, '') From ORPC Where DocNum = T1.BaseRef and CardCode = T1.ShortName) -- A/P Credit Memo
    When T1.TransType = 20 Then (Select isnull(Comments, '') From OPDN Where DocNum = T1.BaseRef and CardCode = T1.ShortName) -- GRPO
    When T1.TransType = 21 Then (Select isnull(Comments, '') From ORPD Where DocNum = T1.BaseRef and CardCode = T1.ShortName) -- Goods Return
    -- Production
    When T1.TransType = 202 Then (Select isnull(Comments,'') From OWOR Where DocNum = T1.BaseRef and PostDate = T1.RefDate) -- Work Order
    -- Banking
    When T1.TransType = 24 Then (Select isnull(Comments, '') From ORCT Where DocNum = T1.BaseRef and CardCode = T1.ShortName) -- Incoming Payment
    When T1.TransType = 46 Then (Select isnull(Comments, '') From OVPM Where DocNum = T1.BaseRef and CardCode = T1.ShortName) -- Outgoing Payment
    When T1.TransType = 30 Then (Select ISNULL(LineMemo, '') From JDT1 Where Ref1 = T1.Ref1 and ShortName = T1.ShortName) --  Journal
    -- Inventory
    When T1.TransType = 59 Then (Select ISNULL(Comments, '') From OIGE Where DocNum = T1.Ref1 and DocDate = T1.RefDate) -- Goods Receipt
    When T1.TransType = 60 Then (Select ISNULL(Comments, '') From OIGN Where DocNum = T1.Ref1 and DocDate = T1.RefDate) -- Goods Issue
    When T1.TransType = 67 Then (Select ISNULL(Comments, '') From OWTR Where DocNum = T1.Ref1 and DocDate = T1.RefDate) -- Stock Transfer
    When T1.TransType = 162 Then (Select ISNULL(Comments, '') From OMRV Where DocNum = T1.Ref1 and DocDate = T1.RefDate) -- Stock Revaluation
    Else ''
    End [Remarks],
    T1.LineMemo,
    Case
    When exists (Select AcctCode From OACT Where AcctCode = T1.ContraAct)
    Then (Select AcctName From OACT Where AcctCode = T1.ContraAct)
    else (Select CardName From OCRD Where CardCode = T1.ContraAct)
    End [Account],
    Case
    When T1.Debit=0.0
    Then 0.0
    Else T1.Debit
    End Debit,
    Case
    When T1.Credit=0.0
      Then 0.0
    Else T1.Credit
    End Credit
    From JDT1 T1
    Where T1.TransType <> -3
    And T1.RefDate Between @FromDate and @ToDate
    And T1.ShortName = @Account
    Order By T1.RefDate,
    T1.TransId
    Regards
    Kennedy

  • About Asset report - table and fields

    Hi ,
    I am developing an Asset Report, I need table and field names for following -
    a) GL A/C P&L
    b) ASSET DEPRECIATION SCHEDULED
    c) FORCASTED DEPRECIATION
    d) PLANNED EXPENSES VERSES ACTUAL EXPENSES
    e) GAP DEPRECIATION CATEGORY
    e) When user enters the asset into SAP, the depreciation expense will automatically book to the sub-ledger. However in order to get the amount on the general ledger, which would be closed for prior periods, user must book a manual entry. So , I need this manual entry field.
    Please guide me.
    Regards,
    Narayan

    problem solved

  • Tables and fields

    I want to know about sd tables and fields relevance.why should tables be linked with each other.
    I understand that data which we enter is stored in tables and by linking fields from one table to another table, where a field is common.
    so can someone give a example showing how to use this information ,not in theory, but practically ?
    Please no 'help sap' links,but just a practical example showing why knowing different tables and field knowledge is useful.
    my email is = [email protected]

    Hi Mehboob
    Say you want to find out all the condition types of a particular document.
    Document details are available in VBAK
    Item level details of documents are seen in VBAP
    Condition types are seen in KONV
    The common fields are VBAK-KNUMV = KONV-KNUMV
    VBAP-POSNR = KONV-KPOSN
    Now if you want to findout all the condition types relevant for a particular line item
    1. Find out the VBAK-KNUMV and VBAK-POSNR for that line item
    2. Go to KONV
    3. Give KONV-KNUMV the value of  VBAK-KNUMV
        and KONV-KPOSN as the value of VBAP-POSNR
    Now execute
    You will get all condition types which are applicable for the line item in that document.
    Now if you want to find like this for 100 documents, you can write a report using these tables and fields.
    Hoep this clears ur doubt.
    Reward if this helps.

  • First Page is Table and drill down page is chart

    Hi All,
    In my dashboard i should display only table. In table, if i select one drill down values. It should display only chart not for table formate.
    How to set this option.
    First page it sholuld be table
    Drill down page should be chart
    How will do this.
    Thanks

    Hi,
    Create two reports one with table and other with chart in compound layout view.Place Table in one page and to to column properties->data format->value interaction->navigation->select chart report that you created under column through which you want to navigate to chart.Make that column as prompted in chart if you want to filter data based on column selected.
    Regards,
    Srikanth
    http://bintelligencegroup.wordpress.com/

  • How to use one query against multiple table and recieve one report?

    I have duplicate tables, (except for their names of course) with commodities prices. They have the same column headings, but the data is different of course. I have a query that gives me a certain piece of information I am looking for but now I need to run this query against every table. I will do this every day as well, to see if the buying criteria is met. There are alot of tables though (256). Is there a way to say run query in all tables and return the results in one place? Thanks for your help.

    hey
    a. the all 256 tables whuld be one big partitoned table
    b. you can use all_tables in order to write a select that will write the report for you:
    SQL> set head off
    SQL> select 'select * from (' from dual
      2  union all
      3  select 'select count(*) from ' || table_name || ' union all ' from a
      4  where table_name like 'DB%' AND ROWNUM <= 3
      5  union all
      6  select ')' from dual;
    select * from (
    select count(*) from DBMS_LOCK_ALLOCATED union all
    select count(*) from DBMS_ALERT_INFO union all
    select count(*) from DBMS_UPG_LOG$ union all
    remove the last 'union all', and tun the generated quary -
    SQL> set head on
    SQL> select * from (
      2  select count(*) from DBMS_LOCK_ALLOCATED union all
      3  select count(*) from DBMS_ALERT_INFO union all
      4  select count(*) from DBMS_UPG_LOG$
      5  );
      COUNT(*)
             0
             0
             0
    Amiel

  • How to protect SAP Application Tables and Reports in R/3

    Hi Gurus,
                 Any one please explain me detail how to protect tables in R/3 with different senarios.
                  How to protect reports in SAP R/3 without assigning SA38 transaction access
                  How to protect Program in SAP R/3 in R/3

    Hello Happyman,
    <b>What do you mean by Protect Table, Program and Report?</b>
    Let me ask you one base Question, On which area are you working? Are you from functional side or Technical side (Developement or Basis guy)?
    This is very clear cut answer that with the restricted autorization you can protect table and programs. Do not provide the change autorization.
    CATCH your BASIS guy and he will do rest of the things. Just explain him what are you want to protect.
    Hope this helps.
    Regards
    Arif Mansuri

  • Form and report on a table - redirecting to report on submit

    Hi,
    I've created a form and a report on a table...
    in a form, one of the item is a radio group (with submit) with static list of values... I've set it up to submit as I am hiding/displaying other items based on the selection... for example, when user select the location value then only city and country fields are displayed and so on...
    my problem is that when I make a selection it saves the state and takes me back to the report... when I come back to the report then I see items (hidden/displayed based on the selection that I made before I left the form)
    any way to fix it...? please advice
    Thanks

    Hi,
    OK - we can't use a Dynamic Action but we can use Javascript to do this.
    Firstly, change the item type to an ordinary Radio button - that is, remove the Submit
    Secondly, in your page attribute's HTML Header setting, add in:
    &lt;script type="text/javascript"&gt;
    function submitByRadioButton()
    if ($v('P1_PKITEM') != '')
      doSubmit('P1_RADIOITEM');
    &lt;/script&gt;Replace P1_PKITEM with the page item name for the hidden primary key and P1_RADIOITEM with the page item name of the radio button.
    Then, on the radio button item, add the following in the HTML Form Element Attributes setting:
    onclick="javascript:submitByRadioButton()"Finally, create a branch that returns to the same page - make sure that the Sequence number puts it before any Unconditional branch. Set the Condition for this to "Request = Expression 1" and enter P1_RADIOITEM (or whatever the page item name is for the radio button) into the Expression 1 setting.
    Now, when the user creates a new record, the hidden P1_PKITEM value will be blank. Clicking the radio button at this time will not trigger a submit and the function checks this. For existing records, P1_PKITEM will contain a value, so the function will allow the doSubmit to run.
    Andy

  • How to get table and column names thats being used in SQL , that's generating all my reports on SSRS.

    Good day,
    I searched through the forum and cant find anything.
    I have around 300 published reports on SSRS and we are busy migrating to a new system.
    They have already setup their tables on the new system and I need to provide them with a list of table names and column names that are being used currently to generate the 300 reports on SSRS.
    We use various tables and databases to generate these reports, and will take me forever to go through each query to get this info.
    Is it at all possible to write a query in SQL 2008 that will give me all the table names and columns being used?
    Your assistance is greatly appreciated.
    I thank you.
    Andre.

    There's no straightforward method for that I guess. There are couple of things you can use to get these details
    1. query the ReportServer.dbo.Catalog table
    for getting details
    you may use script below for that
    http://gallery.technet.microsoft.com/scriptcenter/42440a6b-c5b1-4acc-9632-d608d1c40a5c
    2. Another method is to run the reports and run sql profiler trace on background to retrieve queries used.
    But in some of these cases the report might be using a procedure and you will get only procedure. Then its upto you to get the other details from procedure like tables used, columns etc
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • To store time only in the table and get it to the report in Apex

    Hi,
    I am very very new to Apex.
    I get a txt file with around 57 columns(comma seperated). In apex we import this and insert it into a database table (csv into table) and then generate a reports out of this table using procedure/packages. we have different fields in this extract which gives different dates and times ( thats right dates and time comes seperate in seperate columns). I would like to insert this dates and times seperately into the table. thats is, getting a table as an exact image of the extract we receive.What data type do I choose to save just the time.
    I can only see 'date' data type where I can have both date and time. But can't find anything just for time.
    The main use of this time(s) saved seperately in the table is , I can then easily display it in reports.
    The report the users want has got fields like transport start time, duty start time etc..
    If you can't save time seperately in the database table, then can somebody suggest a way of saving it in table (in the method available)and then getting the time seperated out into the report.
    Currently the users use macro on excel to get this reports and formatting a cell to 'time' is simple.
    Any suggestions welcome.
    Regards
    Liza

    Varad,
    I have been trying to get this date-time issue in different areas in my application.
    From csv to table its working (once I got dates in the extract adjusted to '02mar2009' format).
    Now I have manipulation to do on this datetime.
    Say I have datetime1, to get datetime2 I have to get datetime1 and reduce some minutes.
    I got the time part into l_temp after reducing the minutes.
    datetime2 :=to_date(sysdate || l_temp,'dd-mon-yyyy hh24mi');
    It gives an error saying 'literals doesn't match format string' (both at sql command and PL/SQL in apex
    I even tried datetime2 :=to_date(to_char(sysdate,'dd-mon-yyyy') || l_temp,'dd-mon-yyyy hh24mi');
    gets the same error in apex but this works fine in sql command.
    But if I put datetime2 :=to_date('02mar09' || l_temp,'dd-mon-yyyy hh24mi');
    Do you know why? Can you suggest something?
    Obviously, I can't hard code it. I have read the date from table1 and write it to table 2 with after this manipulation.
    Any suggestion?
    regards
    Liza
    Edited by: liza on Mar 3, 2009 5:13 PM

  • How do I create a crystal report layout with a table and borders

    My crystal report is a signin sheet. The sign in sheet has an ID column, Name column, Institution column, Place to signin column, and Weekday columns with checkboxes in each column for the visitor to checkoff.
    How do I display the data that is being used int he crystal report in a table layout with borders around each cell? And is it possible to center vertical alignment of the data within eacvh cell like Excel?

    Blahahaha! Great answer Deb!
    Seriously though... There is no vertical alignment in CR. There have been several past threads related to this issue and all of them have various workarounds. None of them are very elegant.
    The best workaround I've found (especially if you are grid or borders) is to turn off the boarders for the field itself and drawl a rectangle around the field(s). Now you can place the field in the lower portion of the rectangle and adjust the rectangles height to place the field text in the center of the rectangle.
    This will give you more control over the height of your elements than using a carriage return before the text.
    Jason

Maybe you are looking for